Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “AMR”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 289 records · Page 16
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

Characterization of Losses in Superconducting Radio-Frequency Cavities by Combined Temperature and Magnetic Field Mapping

Superconducting radio-frequency (SRF) cavities are one of the fundamental building blocks of modern particle accelerators. To achieve the highest quality factors (10 10 -10 11 ), SRF cavities are operated at liquid helium temperatures. Magnetic flux trapped on the surface of SRF cavities during cool-down below the critical temperature is one of the leading sources of residual RF losses. Instruments capable of detecting the distribution of trapped flux on the cavity surface are in high demand in order to better understand its relation to the cavity material, surface treatments and environmental conditions. We have designed, developed, and commissioned two novel diagnostic tools to measure the distribution of trapped flux at the surface of SRF cavities. One is a magnetic field scanning system (MFSS) which uses cryogenic Hall probes and anisotropic magnetoresistance sensors that fit the contour of a 1.3 GHz cavity. The second setup is a stationary, combined magnetic and temperature mapping system which uses AMR sensors and carbon resistor temperature sensors, covering the surface of a 3 GHz SRF cavity. The MFSS system revealed a non-uniform distribution of trapped flux on the cavities' surface, dependent on the magnitude of the applied magnetic field during field-cooling below the critical temperature. The MFSS shows that magnetic field scanning as a function of the RF field indicates redistribution of trapped flux at some locations. About ~ 33% of hot-spots observed by temperature mapping during high power RF tests overlapped with the high B-field spots. Almost all high B-field spots observed after field-cool were found to be overlapped on grain boundaries. A clear correlation between the hot- spot formed after quench and local trapped flux was found, providing insight on the RF dissipation of trap vortices. The combined B&T map system showed that the T-map system is capable of detecting hot-spots and quench location on the surface of the 3 GHz SRF cavity. Different distribution of trapped flux was measured after different cool-down and residual B-field, but, no variation in magnetic field distribution was observed during quench, possibly due to magnetic sensors being far from the quench location.

Parajuli, Ishwari↗
DOE OSTI2024

Adaptive Mesh Refinement Simulations for Turbulent Reacting Flow

With the increased availability of exascale computing hardware, detailed simulations of realistic devices can be performed at practically relevant time and length scales. Insights into the multiscale driving mechanisms in compressible reacting flow systems with complex geometry, such as combustors, can be used for design optimization and technology improvements. However, to effectively perform these simulations, advanced numerical algorithms must be used to maintain solution accuracy without incurring undue computational costs. PeleC, part of the Pele suite of codes, leverages block-structured adaptive mesh refinement (AMR) through the AMReX library to capture fine-scale flow features in compressible reacting flows. In this talk, we discuss recent improvements to the numerical algorithms, particularly in regard to describing flows at complex boundary structures, and PeleC's performance on exascale computing hardware. We will demonstrate that PeleC is well-suited for modern, extreme-scale, heterogenous compute platforms.

combustion↗
DOE OSTI2024

Influence of Real Gas Effects on Chemical Kinetics in Oxycombustion in Supercritical Carbon Dioxide

Oxycombustion in supercritical carbon dioxide is an integral part of the Allam Cycle, a technology that enables carbon-neutral use of fossil-fuels and carbon-negative use of biofuels. We simulate oxycombustion in a realistic combustor geometry for two sets of fuel conditions: pure methane, and a 40 percent methane/60 percent carbon dioxide blend, both at 343.15 K. The fuel jet mixes with a preheated swirler of 20 percent oxygen and 80 percent carbon dioxide at 1005.35 K, with a 100 percent carbon dioxide coflow at 783.15 K. The entire system operates at a pressure of 300 bar, putting the entire system above the critical temperature and pressure of carbon dioxide. Simulations are performed using PeleC, a compressible block-structured adaptive-mesh refinement (AMR) reacting flow code. Direct comparison of results using thermodynamically self-consistent implementations of the ideal gas equation of state and the Soave-Redlich-Kwong (SRK) equation of state allow quantification of the real gas impacts on combustion kinetics, flow temperatures, and pollutant formation.

carbon dioxide↗
DOE OSTI2024

Electric Motor Thermal Management

The poster reports the accomplishments of EDT-Electric Motor Thermal Management consortium project for 2024 VTO Annual Merit Review (AMR). The overall aims of the project are to support research enabling compact, reliable, low-cost, and efficient electric machines aligned with roadmap research areas; to collaborate with ORNL, Ames, and SNL to provide motor thermal analysis support, reliability evaluation, and material measurements on related motor research at national laboratories; and collaborate with university partners including Georgia Institute of Technology and University of Wisconsin Madison to support university-led motor thermal management research efforts.

ADVANCED PROPULSION SYSTEMS↗
DOE OSTI2024

Computational Methods for Multi-Physics Simulation of Melting in Steelmaking

Iron and steel production accounts for approximately 8% of global carbon dioxide (CO) emissions. Pathways to decarbonize include replacing fossil fuels in iron ore reduction and electrifying other steelmaking processes. Iron pellets produced by hydrogen, called Hydrogen Direct Reduced Iron (HDRI), have property differences from those produced using conventional DRI processes. These differences may impact melting in electric arc furnaces (EAF) and other downstream processes. The physical properties of iron pellets vary significantly with temperature during heating, complicating predictions of their behavior. In this project, we seek to develop an integrated simulation, including the fluid flow and convective thermal transport around the pellet particle. We also examine conduction and phase changes within the particle as they impact the melting process. We use adaptive mesh refinement (AMR) to resolve both the changing size of the particle and the complex physics of the interaction between the pellet and the surrounding fluid. We base our simulations on the AMReX-incflo module, which allows large-scale Navier-Stokes simulation while resolving the changing particle size during melting. As we advance our numerical tools, we anticipate an improved understanding of the dynamics of HDRI melting, which will, in turn, accelerate the adoption of low-carbon technologies in the steelmaking industry.

AMReX↗
DOE OSTI2024

Development of a Performance Portable Non-Equilibrium Plasma Fluid Solver on Adaptive Grids

This presentation will describe the numerical techniques, programming paradigms, verification, and performance of a non-equilibrium plasma fluid solver that can effectively utilize current and upcoming central processing and graphics processing unit (CPU+GPU) architectures. Our plasma fluid model solves the conservation equations for self-consistent electrostatic Poisson, electron and heavy species transport, and electron temperature on adaptive Cartesian grids. Our solver is written using performance portable adaptive mesh management library, AMReX (Zhang et al., JOSS, 4 (37) 1370, 2019), and can be built and run on widely available vendor specific GPU architectures (NVIDIA/AMD/Intel). We utilize a non-subcycled second order semi-implicit time-stepping method where all adaptive mesh refinement (AMR) levels are advanced with the same time step. The composite multi-level multigrid solver from within AMReX is used for each of the governing equations that are cast into a Helmholtz equation form. We have also developed a python based chemical mechanism parser framework that uses a similar format as CANTERA (Goodwin et al., Zenodo, 2018) yaml files as input. Our custom parser reads the yaml file and provides C++ files with transport and production rate functions that can be executed on both host (CPU) and device (GPU). We present verification of our solver using method of manufactured solutions that indicate formal second order accuracy with central diffusion and fifth order weighted-essentially-non-oscillatory (WENO) advection scheme. We also verify our solver with published literature on low-pressure capacitive and high-pressure streamer discharges. Our initial performance studies indicate 10X speed-up using 20 NVIDIA GPUs versus 200 CPUs for an atmospheric streamer discharge problem solved on a 512 x 1024 x 512 grid.

graphics processing units↗
DOE OSTI2024

Adaptive Patching for High-resolution Image Segmentation with Transformers

Attention-based models are proliferating in the space of image analytics, including segmentation. The standard method of feeding images to transformer encoders is to divide the images into patches and then feed the patches to the model as a linear sequence of tokens. For high-resolution images, e.g. microscopic pathology images, the quadratic compute and memory cost prohibits the use of an attention-based model, if we are to use smaller patch sizes that are favorable in segmentation. The solution is to either use custom complex multi-resolution models or approximate attention schemes. We take inspiration from Adapative Mesh Refinement (AMR) methods in HPC by adaptively patching the images, as a pre-processing step, based on the image details to reduce the number of patches being fed to the model, by orders of magnitude. This method has a negligible overhead, and works seamlessly with any attention-based model, i.e. it is a pre-processing step that can be adopted by any attention-based model without friction. We demonstrate superior segmentation quality over SoTA segmentation models for realworld pathology datasets while gaining a geomean speedup of 6.9× for resolutions up to 64K2, on up to 2, 048 GPUs.

Zhang, Enzhi↗
NASA NTRS2011

The Analysis of Rush Orders Risk in Supply Chain: A Simulation Approach

Satisfying customers by delivering demands at agreed time, with competitive prices, and in satisfactory quality level are crucial requirements for supply chain survival. Incidence of risks in supply chain often causes sudden disruptions in the processes and consequently leads to customers losing their trust in a company's competence. Rush orders are considered to be one of the main types of supply chain risks due to their negative impact on the overall performance, Using integrated definition modeling approaches (i.e. IDEF0 & IDEF3) and simulation modeling technique, a comprehensive integrated model has been developed to assess rush order risks and examine two risk mitigation strategies. Detailed functions sequence and objects flow were conceptually modeled to reflect on macro and micro levels of the studied supply chain. Discrete event simulation models were then developed to assess and investigate the mitigation strategies of rush order risks, the objective of this is to minimize order cycle time and cost.

Mahfouz, Amr↗
DOE OSTI2025

Revealing Robust Room Temperature Ferromagnetism in Gd‐Doped Few‐Layered MoS 2 Thin Films

2D MoS 2 holds great promise for spintronics, yet is limited by intrinsic diamagnetism. This study demonstrates inducing ferromagnetic behavior in MoS 2 films doped with 0.47% Gd, achieving an ultrahigh saturation magnetization of 454 emu/cm 3 in a few‐layered film over 11‐times higher than bulk films (40 nm). Raman spectroscopy, X‐ray photoelectron spectroscopy, X‐ray magnetic circular dichroism, and density functional theory (DFT) calculations reveal an interplay between Gd dopants and Mo, S vacancies (V 1Mo+2S ), leading to the formation of bound magnetic polarons (BMPs) that drive ferromagnetic ordering. H 2 S annealing and DFT calculations reveal that defect healing reduces the saturation magnetization by 83%. High sulfur migration barrier in few‐layered films helps preserve BMPs, thereby sustaining ferromagnetism, whereas lower migration barriers in bulk films lead to suppression. These findings highlight the synergy between Gd doping and defect engineering in achieving ultrahigh room‐temperature ferromagnetism, offering a scalable strategy for developing high‐performance 2D magnetic materials for spintronic applications.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Recent advancements in the genetic engineering of microalgae

The development of more sustainable food, feed, and bio-products is critical to mitigating the environmental stresses facing our world today. Algae, which includes seaweeds, eukaryotic microalgae, and cyanobacteria, are a promising platform to achieving this, as they have low energy and space requirements, are safe for human and animal consumption, and can be manipulated to produce a diversity of valuable bioproducts. This review focuses on microalgae, both eukaryotic and cyanobacteria. In the past, addressing the major challenges of bringing microalgal production systems to an economically viable scale only had a relatively small genetic toolset to work with, in comparison to other microbial systems such as bacteria and yeast. Expanding the molecular tools available for genetic engineering of microalgae will lead to higher product yields, and accelerate the development of new microalgal bioproducts for commercial applications, thereby supporting the shift towards more environmentally friendly products. In this review, we highlight significant advances from recent years on the design of microalgal expression vectors, discovery of genetic regulatory elements (promoters and transcription factors), optimization of transformation methods, and development of new strain improvement techniques, all aimed at advancing microalgae to become a more efficient biomanufacturing platform. We then discuss how these tools have been applied to improving recombinant protein production, and to enhance metabolic pathway engineering.

09 BIOMASS FUELS↗
DOE OSTI2024

Isolation and characterization of microalgae strains able to grow on complex biomass hydrolysate for industrial application

Producing algae biomass economically remains one of the chief bottlenecks for commercializing algae products. The aim of this work is to identify new strains of algae that can grow on cost effective media derived from cellulosic waste streams, characterize the potential of these strains to produce compounds of high industrial value, and identify those strains capable of facile genetic transformation. Here we report, out of 45 strains initially isolated, three were selected based on their ability to efficiently grow on organic waste material (corn stover hydrolysate) as a carbon source; Chlorococcum sp., Desmodesmus sp., and Chlamydomonas debaryana. Untargeted metabolomics was performed on each strain, identifying several metabolites of high relative abundances that are of commercial interest, such as lactic acid, butane-2,3-diol, amino acids, tartaric acid, triacylglycerols, and lipid species containing different, mono- and polyunsaturated fatty acids, depending on the strain and growth condition. The strains also produced carbohydrates of industrial relevance. Chlorococcum sp. was found to be genetically transformable using standard simple transformation protocols. These results suggest that with further development, these strains could open the door to economic production of high value commercial compounds utilizing waste streams from cellulosic biomass.

09 BIOMASS FUELS↗
DOE OSTI2025

Description of a novel extremophile green algae, Chlamydomonas pacifica , and its potential as a biotechnology host

We present the comprehensive characterization of a newly identified microalga, Chlamydomonas pacifica , originally isolated from a soil sample in San Diego, CA, USA. This species showcases remarkable biological versatility, including a broad pH range tolerance (6–11.5), high thermal tolerance (up to 42 °C), and salinity resilience (up to 2 % NaCl). Its amenability to genetic manipulation and sexual reproduction via mating, particularly between the two opposing strains CC-5697 & CC-5699, now publicly available through the Chlamydomonas Resource Center, underscores its potential as a biotechnological chassis. The biological assessment of C. pacifica revealed versatile metabolic capabilities, including diverse nitrogen assimilation capability, motility and phototaxis. Genomic and transcriptomic analyses identified 17,829 genes within a 121 Mb genome, featuring a GC content of 61 %. The codon usage of C. pacifica closely mirrors that of C. reinhardtii , indicating a conserved genetic architecture that supports a trend in codon preference with minor variations. Phylogenetic analyses position C. pacifica within the core-Reinhardtinia clade yet distinct from known Volvocales species. The lipidomic data revealed an abundance of triacylglycerols (TAGs), promising for biofuel applications and lipids for health-related benefits. Our investigation lays the groundwork for exploiting C. pacifica in biotechnological applications, from biofuel generation to synthesizing biodegradable plastics, positioning it as a versatile host for future bioengineering endeavors.

Alkali tolerant↗
DOE OSTI2023

Radiation-induced alteration of sandstone concrete aggregate

This study investigates the alteration of felsic sandstone-type rock, which is used as a coarse aggregate in concrete, subject to the effects of gamma-ray and neutron irradiation. The effects of three gamma-ray doses (27, 55, and 108 MGy) and four neutron fluence levels (1.22, 2.19, 6.99, and 14.30 × 10 19 n/cm 2 , $E$ ≥ 0.01 MeV) were investigated. Quartz and albite were found to be the major rock-forming minerals, with microcline intermediates, chlorite, and muscovite as the minors. Gamma rays caused no significant changes to the physical properties of the sandstone aggregates, even at high doses (108 MGy). In contrast, neutron irradiation caused alterations that became more pronounced at higher neutron fluences. The solid was confirmed to expand through metamictization of the rock-forming minerals. Quartz and muscovite were the most affected phases, whereas albite and microcline intermediates were only slightly affected, and chlorite was almost unaffected. The decrease in density was measured by He and water pycnometry, and this value was almost reproduced by calculations using the rock-forming mineral composition of the pristine sample measured using X-ray powder diffraction/Rietveld analysis and the cell volume change of the major forming minerals. In addition, light optical microscopy and scanning electron microscopy images confirmed the presence of intergranular and intragranular cracks. Intergranular cracks appeared to have initiated from the quartz grains, which expanded significantly. The intragranular cracks were frequently observed in the albite and microcline intermediates. These cracks can be described as radial cracks starting from the expanding quartz, caused by enforced displacement for deformation consistency with quartz expansion. The crack area ratio quantified by SEM image analysis corresponds to the discrepancy of the volume expansion difference calculated by He or water pycnometry and dimensional change measurements. In conclusion, an evaluation of solid expansion and crack openings in aggregates is important to estimate concrete degradation.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Mitigation and Diagnosis of Pin-Hole Formation in Polymer Electrolyte Membrane Fuel Cells

In this work, we implement a calendering technique to flatten stray fibers within the gas diffusion media, thereby mitigating pin-hole formation in the hot-pressed MEAs. We have investigated the influence of calendering on the long-term durability for several types of gas diffusion electrodes (GDEs) using a combined chemical and mechanical accelerated stress test (AST). The calendered MEAs demonstrate an average AST lifetime improvement of 77% relative to the as-fabricated MEAs.

AMR↗