Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “AMPLIFICATION”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 289 records · Page 16

Supersonic boundary layer stability analysis with and without suction on aircraft wings

An analysis of the boundary layer and its stability with and without suction on a supersonic cruise fighter wing having biconvex 5 percent thick airfoils is conducted for a free-stream Mach number of 2.0 and an angle of attack of 4.0 deg. It is found that the largest amplification is due to the highly oblique traveling cross flow type waves, oriented approximately 80 deg without suction, and 87.5 deg with suction, from the local external velocity vector. It is concluded that with the biconvex airfoil section on the thin swept wing, this type of instability would be the likely cause of transition. The approximate values of the frequency, wave orientation angle, and wavelength/chord ratio for the most amplified disturbance are given for the cases of suction and no suction. The largest amplifications are found for highly oblique traveling crossflow type waves oriented at approximately 80 deg without suction and 87.5 deg with suction, measured from the local external velocity vector.

Agrawal, Shreekant↗

A microlensing model for QSO 2237 + 0305

Models of microlensing are presented for the four images of QSO 2237 + 0305, with the surface mass density and shear for each image based on the macrolensing model developed by Schneider et al. (1988). The computations were done with a new code that makes use of the hierarchical tree method. The high efficiency of this approach makes it possible to include up to 60,000 lensing stars with different masses. Examples are given of amplification maps, light curves, correlation functions, and amplification probabilities. All these are very strongly affected by the shear due to macrolensing. The observed changes in the luminosity of the four images of QSO 2237 + 0305 are most likely induced by microlensing.

Wambsganss, J.↗

The Design of Optical Sensor for the Pinhole/Occulter Facility

Three optical sight sensor systems were designed, built and tested. Two optical lines of sight sensor system are capable of measuring the absolute pointing angle to the sun. The system is for use with the Pinhole/Occulter Facility (P/OF), a solar hard x ray experiment to be flown from Space Shuttle or Space Station. The sensor consists of a pinhole camera with two pairs of perpendicularly mounted linear photodiode arrays to detect the intensity distribution of the solar image produced by the pinhole, track and hold circuitry for data reduction, an analog to digital converter, and a microcomputer. The deflection of the image center is calculated from these data using an approximation for the solar image. A second system consists of a pinhole camera with a pair of perpendicularly mounted linear photodiode arrays, amplification circuitry, threshold detection circuitry, and a microcomputer board. The deflection of the image is calculated by knowing the position of each pixel of the photodiode array and merely counting the pixel numbers until threshold is surpassed. A third optical sensor system is capable of measuring the internal vibration of the P/OF between the mask and base. The system consists of a white light source, a mirror and a pair of perpendicularly mounted linear photodiode arrays to detect the intensity distribution of the solar image produced by the mirror, amplification circuitry, threshold detection circuitry, and a microcomputer board. The deflection of the image and hence the vibration of the structure is calculated by knowing the position of each pixel of the photodiode array and merely counting the pixel numbers until threshold is surpassed.

Greene, Michael E.↗

Weak gravitational lensing due to large-scale structure of the universe

The effect of the large-scale structure of the universe on the propagation of light rays is studied. The development of the large-scale density fluctuations in the omega = 1 universe is calculated within the cold dark matter scenario using a smooth particle approximation. The propagation of about 10 to the 6th random light rays between the redshift z = 5 and the observer was followed. It is found that the effect of shear is negligible, and the amplification of single images is dominated by the matter in the beam. The spread of amplifications is very small. Therefore, the filled-beam approximation is very good for studies of strong lensing by galaxies or clusters of galaxies. In the simulation, the column density was averaged over a comoving area of approximately (1/h Mpc)-squared. No case of a strong gravitational lensing was found, i.e., no 'over-focused' image that would suggest that a few images might be present. Therefore, the large-scale structure of the universe as it is presently known does not produce multiple images with gravitational lensing on a scale larger than clusters of galaxies.

Jaroszynski, Michal↗

The effect of compliant walls on secondary instabilities in boundary layer transition

The effect of compliant walls on the stage of transition where three-dimensional secondary instabilities (SIs) are excited is studied. A theory developed by Herbert (1983) to represent SIs for two-dimensional primary instabilities is extended to allow for oblique waves. The effects of the variations in primary amplitude, spanwise, wavenumber, and Reynolds number on the SIs are examined. As in the rigid-wall case, the subharmonic mode of SI dominates for low-amplitude disturbances over compliant walls. Both isotropic and nonisotropic compliant walls lead to reduced SI growth rates as compared to the rigid-wall results. Calculations show that, for high frequencies, the nonisotropic wall suppresses the amplification of the SIs, while for the isotropic wall SIs grow with an explosive rate similar to the rigid-wall results. For lower frequencies, both types of compliant wall suppress the amplification of SIs.

Joslin, Ronald D.↗

The contribution of ion-cyclotron waves to electron heating and SAR-arc excitation near the storm-time plasmapause

The potential role of ion-cyclotron waves in the electron heating process has been studied, using the HOTRAY code. It is demonstrated that ion-cyclotron waves can play an important role in both the energy transfer to plasmaspheric electrons and the subsequent downward heat conduction to SAR arc altitudes. In particular, such waves can experience enhanced path integrated amplification along the steep plasmapause density gradient. The latter tends to keep the wave normal angle small on several successive bounces across the equator, thus allowing cyclotron-resonant amplification leading to a total gain of up to 20 e-foldings. When the wave propagation vector becomes highly oblique, absorption occurs during Landau resonance with thermal plasmaspheric electrons, increasing the electron temperature in the direction parallel to the ambient field and leading directly to heat conduction into ionosphere.

Thorne, Richard M.↗

Three-dimensional compressible stability-transition calculations using the spatial theory

The e(exp n)-method is employed with the spatial amplification theory to compute the onset of transition on a swept wing tested in transonic cryogenic flow conditions. Two separate eigenvalue formulations are used. One uses the saddle-point method and the other assumes that the amplification vector is normal to the leading edge. Comparisons of calculated results with experimental data show that both formulations give similar results and indicate that the wall temperature has a rather strong effect on the value of the n factor.

Niethammer, R.↗

The magnetic field in the heliosheath

The interplanetary magnetic field (IMF) behaves in a reasonably well-understood manner between the Sun and the heliospheric termination shock. At the shock, the azimuthal field is amplified by a factor of four (for a strong shock) and undergoes secular amplification in the heliosheath until the flow is fully turned into the downstream direction and has reached its asymptotic state in the distant heliotail. This amplification may lead to important MHD effects that can cause the shock to be closer to the Sun than otherwise expected. Here we further examine whether there are important MHD effects in the heliosheath. We do this by calculating the kinematic compression of the magnetic field in the heliosheath using an analytic incompressible flow model of the dynamics downstream of the shock. We conclude that it is likely that MHD effects are important in the heliosheath in a narrow cone about the upstream direction.

Suess, S. T.↗

A limitation of the generation of magnetic fields

Simple arguments are put forward to show that the currents produced in disks by radiative or other types of drag forces on electrons must give rise to extraordinarily small magnetic fields. The field strengths are consistent with earlier (more complex) treatments of this class of problem, but inconsistent with the claims of recent papers in the literature. The discrepancies involve the treatment of self-induction. Ion-electron inductive coupling limits the generated magnetic field to have an associated ion Larmor radius greater than or of order of the radius of the disk, a result which follows most directly from conservation of canonical ion momentum, p + eA/c. An explicit time-dependent model for the buildup of the field leads to the same conclusion. If internal velocity gradient scales are smaller than the ion Larmor radius, and the plasma is not collision dominated, standard dynamo amplification within the disk is hardly likely to be effective. But to explain the Galactic field, dynamo amplification in a collisional plasma is also likely to be problematic. The difficulties posed by the existence of ordered Galactic-scale magnetic fields are made all the more acute by the simplicity and the scope of the discussed field limitation.

Balbus, Steven A.↗

On the three-dimensional instability of laminar boundary layers on concave walls

A study is made of the stability of laminar boundary-layer profiles on slightly curved walls relative to small disturbances that result from vortices whose axes are parallel to the principal direction of flow. The result is an eigenvalue problem by which, for a given undisturbed flow at a prescribed wall, the amplification or decay is computed for each Reynolds number and each vortex thickness. For neutral disturbances (zero amplification) a critical Reynolds number is determined for each vortex distribution. The numerical calculation produces amplified disturbances on concave walls only.

FLOW, LAMINAR↗

A multilayered approach to superconducting tunnel junction x ray detectors

'First generation' superconducting tunnel junction X-ray detectors (characterized by a single tunnel junction in direct contact with its substrate, with totally external amplification) remain more than an order of magnitude away from their theoretical energy resolutions which are in the order of eV's. The difficulties that first generation devices are encountering are being attacked by a 'second generation' of superconducting X-ray detector designs including quasiparticle trapping configurations and Josephson junction arrays. A second generation design concept, the multilayered superconducting tunnel junction X-ray detector, consisting of tens to hundreds of tunnel junctions stacked on top of one another (a superlattice), is presented. Some of the possibilities of this engineered materials approach include the tuning of phonon transmission characteristics of the material, suppression of parasitic quasiparticle trapping and intrinsic amplification.

Rippert, E. D.↗

Effects of shock strength on shock turbulence interaction

Direct numerical simulation (DNS) and linear analysis (LIA) of isotropic turbulence interacting with a shock wave are performed for several upstream shock normal Mach numbers (M(sub 1)). Turbulence kinetic energy (TKE) is amplified across the shock wave, but this amplification tends to saturate beyond M(sub 1) = 3.0. TKE amplification and Reynolds stress anisotropy obtained in DNS are consistent with LIA predictions. Rapid evolution of TKE immediate downstream of the shock wave persists for all shock strengths and is attributed to the transfer between kinetic and potential modes of turbulence energy through acoustic fluctuations. Changes in energy spectra and various length scales across the shock wave are predicted by LIA, which is consistent with DNS results. Most turbulence length scales decrease across the shock. Dissipation length scale (rho-bar q(exp 3) / epsilon), however, increases slightly for shock waves with M(sub 1) less than 1.65. Fluctuations in thermodynamic variables behind the shock wave stay nearly isentropic for M(sub 1) less than 1.2 and deviate significantly from isentropy for the stronger shock waves due to large entropy fluctuation generated through the interaction.

Lee, Sangsan↗

Miniaturization in x ray and gamma ray spectroscopy

The paper presents advances in two new sensor technologies and a miniaturized associated electronics technology which, when combined, can allow for very significant miniaturization and for the reduction of weight and power consumption in x-ray and gamma-ray spectroscopy systems: (1) Mercuric iodide (HgI2) x-ray technology, which allows for the first time the construction of truly portable, high-energy resolution, non-cryogenic x-ray fluorescence (XRF) elemental analyzer systems, with parameters approaching those of laboratory quality cryogenic instruments; (2) the silicon avalanche photodiode (APD), which is a solid-state light sensitive device with internal amplification, capable of uniquely replacing the vacuum photomultiplier tube in scintillation gamma-ray spectrometer applications, and offering substantial improvements in size, ruggedness, low power operation and energy resolution; and (3) miniaturized (hybridized) low noise, low power amplification and processing electronics, which take full advantage of the favorable properties of these new sensors and allow for the design and fabrication of advanced, highly miniaturized x-ray and gamma-ray spectroscopy systems. The paper also presents experimental results and examples of spectrometric systems currently under construction. The directions for future developments are discussed.

Iwanczyk, Jan S.↗

Measurement of very small phase fluctuations by means of the operational approach

Recently Noh, Fourgeres and Mandel (NFM) have improved the operational approach to the quantum phase problem substantially and measured the phase dispersion of coherent light down to very small means photon numbers of the order of 10(exp -2). This has prompted many other investigations and clarified some important questions in relation to what is actually measured. Although their treatment is rather general, we confine ourselves here to the case of a strong local oscillator (LO) and reproduce their measurement scheme. Surprisingly enough, this simultaneous measurement of the sine and the cosine of the phase difference is completely equivalent to an old proposal to measure the phase after strong linear amplification realized experimentally by the Welling group. The reason for this rests on the fact, that in both cases the results are determined by the Q function of the signal. This was shown for amplification in and for the measurement after beam splitting by Lai and Haus.

Bandilla, Arno↗

Core magnetic field enhancement in single X line, multiple X line and patchy reconnection

Magnetic flux transfer events often show a significant increase of the magnetic field strength at the center of the events. Similar magnetic field observations have been reported for structures in or near the plasma sheet of the magnetotail at about 20 R(sub E). We have carried out two-dimensional (2D) and three-dimensional (3D) and simulations of single X line reconnection (SXR), multiple X line reconnection (MXR), and patchy reconnection to determine and compare the amplification of the magnetic field in the center of the developing flux tubes. The various processes are achieved by appropriate choices of 2D or 3D resistivity models. The simulations show that the increase in magnetic field strength depends on both the property of the initial configuration and the particular reconnection geometry. For the chosen initial conditions the MXR process leads to a larger increase in the core magnetic field than the patchy reconnection and SXR caused by larger magnetic tensions in the MXR process. The 3D processes always lead to a larger amplification than the corresponding 2D processes. In the 3D cases, force imbalance in the y direction will accelerate plasma out of the flux tube. This process reduces the thermal pressure and leads to a further compression of the flux rope, which yields an additional increase in the interior magnetic field strength.

Ma, Z. W.↗

Cyclogenesis in a saturated environment

The dynamics of baroclinic wave growth in a saturated environment is examined using linear and nonlinear models employing a parameterization of latent heat release that assumes all rising air is saturated, and saturation equivalent potential temperature is conserved on ascent. Piecewise potential vorticity (PV) diagnostics are used to interpret the results. When the stability to vertical displacements in saturated air is allowed to increase with height, as it must in an atmosphere with a constant, positive lapse rate of potential temperature, the growth rates of the most unstable modes of the Eady problem grow only marginally faster than the modes of the dry problem. The vertical variation of moist static stability produces a gradient of moist potential vorticity in the rising air, eliminating the short-wave cutoff present in the dry Eady problem. The destabilization of the short waves is shown to be associated with the interaction between surface potential temperature anomalies and diabatically generated lower-tropospheric potential vorticity anomalies. Nonlinear primitive equation simulations, starting from normal-mode initial conditions, show that while the dry wave grows at nearly the linear growth rate until maximum amplitude is reached, the moist wave grows significantly faster than the linear growth rate at finite amplitude. This enhanced growth is associated with the rapid amplification of a mesoscale PV anomaly generated by latent heat release at the warm front. The rapid amplification of the surface cyclone results from the superposition of the circulation associated with this misoscale PV anomaly upon the circulation associated with the surface and upper boundary potential temperature anomalies. Additional integrations with finite-amplitude initial conditions more typical of atmospheric conditions exhibit similar behavior. It is suggested that many of the rapid cyclogenesis events that occur as upper-troposheric PV anomalies cross the east coasts of continents may arise from the rapid generation of PV anomalies by condensational heating in the moist maritime lower troposphere.

Whitaker, Jeffrey S.↗

Modeling of the hydrogen maser disk in MWC 349

Maser amplification in a Keplerian circumstellar disk seen edge on-the idea put forward by Gordon (1992), Martin-Pintado, & Serabyn (1992), and Thum, Martin-Pintado, & Bachiller (1992) to explain the millimeter hydrogen recombination lines in MWC 349-is further justified and developed here. The double-peaked (vs. possible triple-peaked) form of the observed spectra is explained by the reduced emission from the inner portion of the disk, the portion responsible for the central ('zero velocity') component of a triple-peaked spectrum. Radial gradient of electron density and/or free-free absorption within the disk are identified as the probable causes of this central 'hole' in the disk and of its opacity. We calculate a set of synthetic maser spectra radiated by a homogeneous Keplerian ring seen edge-on and compare them to the H30-alpha observations of Thum et al., averaged over about 1000 days. We used a simple graphical procedure to solve an inverse problem and deduced the probable values of some basic disk and maser parameters. We find that the maser is essentially unsaturated, and that the most probable values of electron temperature. Doppler width of the microturbulence, and electron density, all averaged along the amplification path are, correspondingly, T(sub e) less than or equal to 11,000 K, V(sub micro) less than or equal to 14 km/s, n(sub e) approx. = (3 +/- 2) x 10(exp 7)/cu cm. The model shows that radiation at every frequency within the spectrum arises in a monochromatic 'hot spot.' The maximum optical depth within the 'hot spot' producing radiation at the spectral peak maximum is tau(sub max) approx. = 6 +/- 1; the effective width of the masing ring is approx. = 0.4-0.7 times its outer diameter; the size of the 'hot spot' responsible for the radiation at the spectral peak frequency is approx. = 0.2-0.3 times the distance between the two 'hot spots' corresponding to two peaks. An important derivation of our model is the dynamical mass of the central star, M(sub *) approx. = 26 solar masses (D/1.2 kpc), D being the distance to the star. Prospects for improving the model are discussed.

Ponomarev, Victor O.↗

Programmable Iterative Optical Image And Data Processing

Proposed method of iterative optical image and data processing overcomes limitations imposed by loss of optical power after repeated passes through many optical elements - especially, beam splitters. Involves selective, timed combination of optical wavefront phase conjugation and amplification to regenerate images in real time to compensate for losses in optical iteration loops; timing such that amplification turned on to regenerate desired image, then turned off so as not to regenerate other, undesired images or spurious light propagating through loops from unwanted reflections.

Jackson, Deborah J.↗