Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “AG”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 289 records · Page 16

Development of a semi-empirical potential for simulation of Ni solute segregation into grain boundaries in Ag

An Ag–Ni semi-empirical potential was developed to simulate the segregation of Ni solutes at Ag grain boundaries (GBs). The potential combines a new Ag potential fitted to correctly reproduce the stable and unstable stacking fault energies in this metal and the existing Ni potential from Mendelev et al (2012 Phil. Mag. 92 4454–69). The Ag–Ni cross potential functions were fitted to ab initio data on the liquid structure of the Ag 80 Ni 20 alloy to properly incorporate the Ag–Ni interaction at small atomic separations, and to the Ni segregation energies at different sites within a high-energy Σ9 (221) symmetric tilt GB. By deploying this potential with hybrid Monte Carlo/molecular dynamics simulations, it was found that heterogeneous segregation and clustering of Ni atoms at GBs and twin boundary defects occur at low Ni concentrations, 1 and 2 at%. This behavior is profoundly different from the homogeneous interfacial dispersion generally observed for the Cu segregation in Ag. A GB transformation to amorphous intergranular films was found to prevail at higher Ni concentrations (10 at%). In conclusion, the developed potential opens new opportunities for studying the selective segregation behavior of Ni solutes in interface-hardened Ag metals and its effect on plasticity.

36 MATERIALS SCIENCE↗

Performance testing of a prototype Pd-Ag diffuser

The fusion fuel cycle has gained significant attention over the last decade as interest in fusion programs has increased. One of the critical components of the fusion process is the tritium fuel cycle. The tritium fuel cycle is designed to supply and recycle process tritium at a specific throughput rate. One of the most important processes within the tritium fuel cycle is the clean-up of the of the process tritium. This step will initially separate the hydrogen isotopes (H2, D2, and T2) from the rest of the process gas using Pd-Ag diffusers or permeators. The Pd-Ag diffuser is an integral component for any tritium purification system; whether part of the United States’ defense mission or fusion programs. Domestic manufacturers of Pd-Ag diffusers are extremely limited and only a few manufacturers exist. Johnson-Matthey (JM) Pd-Ag diffusers (permeators) have previously been evaluated for the separation of hydrogen isotopes from non-hydrogen gas species in the process. JM is no longer manufacturing Pd-Ag diffusers and a replacement vendor needs to be identified to support future needs. A prototype Pd-Ag diffuser has been manufactured by Power and Energy, and is considered a potential replacement for the JM diffuser for tritium service. New diffuser designs for a tritium facility for any fusion energy applications must be characterized by evaluating their operating envelope prior to installation in a tritium processing facility. The prototype Pd-Ag diffuser was characterized to determine the overall performance as a function of the permeation of hydrogen through the membrane. The tests described in this report consider the effects of feed gas compositions, feed flow rates, pump configuration and internal tube pressure on the permeation of H2 through the Pd-Ag tubes.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Understanding of Ag Nanocatalysts for Electrocatalytic CO2 Conversion: Effects of Particle Size and Carbon Support

In this talk, we combined ultrahigh vacuum (UHV) surface science techniques, electrochemical measurements, and computational modeling to investigate Ag based electrocatalysts for CO2 reduction reaction (CO2RR). Our goal is to understand the critical characteristics governing the activity and selectivity of Ag electrocatalysts. Ag electrocatalysts were grown on highly oriented pyrolytic graphite (HOPG) in the UHV chamber, characterized with X-ray photoelectron spectroscopy (XPS) and scanning tunneling microscopy (STM), and then tested in a custom-built gastight H-cell. Supported by computational modeling based on density functional theory (DFT) calculations and microkinetic modeling (MKM), our studies revealed a strong size-dependent electrocatalytic CO2-to-CO conversion of the Ag nanoparticle electrocatalysts with average particle diameter between 2 to 6 nm. Smaller diameter (< 3 nm) particles favored H2 evolution reaction (HER) due to a high population of Ag edge sites, whereas larger diameter particles favored CO2RR as the population of Ag(100) surface sites grew. We further discovered that electronic interactions between small diameter Ag particles and highly defective carbon supports could break the size-dependent CO2RR reactivity, resulting in highly selective (CO Faradaic Efficiency > 90%) and active Ag nanoparticle electrocatalysts with sizes < 2 nm diameter. This knowledge is key to understand electrocatalysts performance and to ultimately guide electrocatalyst design

Ag nanoparticles↗

Matching the BtA line to the bare-AGS (Part 1)

The Booster to AGS (BtA) transfer line [Ref for BtA line] transports the beam bunches from the AGS-Booster to the AGS synchrotron, and also matches the beam parameters ({beta}{sub x,y}, {alpha}{sub x,y}) and dispersion functions ({eta}{sub x,y}, {eta}{prime}{sub x,y}) of the transported beam to the corresponding quantities of the circulating beam in AGS, at the AGS injection point. In this technical note we describe in details, the calculations of the matching procedure of the BtA line to the bare-AGS, and provide magnet settings for the MAD-model of the BtA transfer line which is 'matched' to the bare-AGS. In a separate but more concise technical note (Part II) we will present results on the beam optics of the BtA beam line which is 'matched' to the AGS with two helical snakes.

43 PARTICLE ACCELERATORS↗

Silica‐Supported Au–Ag Catalysts for the Selective Hydrogenation of Butadiene

Abstract Gold and silver are miscible over the entire composition range, and form an attractive combination for fundamental studies on bimetallic catalysts. Au–Ag catalysts have shown synergistic effects for different oxidation and liquid‐phase hydrogenation reactions, but have rarely been studied for gas‐phase hydrogenation. In this study 3 nm particles of Au, Ag and Au–Ag supported on silica (SBA‐15) were investigated as catalysts for selective hydrogenation of butadiene in an excess of propene. The Au catalyst was over an order of magnitude more active than the Ag catalyst at 120 °C. The initial activity of the Au–Ag catalysts scaled linearly with the Au‐content, suggesting a direct correlation between the surface and overall compositions of the nanoparticles and the absence of synergistic effects. All Au‐containing catalysts were highly selective to butenes (>99.9 %). The Au catalysts were stable, whereas the Au–Ag catalysts lost about half of their activity during 20 h run time at 200 °C, but the initial activity was restored by a consecutive oxidation‐reduction treatment. Near ambient pressure x‐ray photoelectron spectroscopy showed that exposure to H 2 at elevated temperatures led to a gradual enrichment of the surface of the Au–Ag nanoparticles by Ag. These observations highlight the importance of considering progressive atomic rearrangements in bimetallic nanocatalysts under reaction conditions.

Masoud, Nazila↗

Ag−Au‐Bimetal Incorporated ZnO‐Nanorods Photo‐Anodes for Efficient Photoelectrochemical Splitting of Water

Abstract Plasmonic Ag−Au/ZnO nanorods (ZNRs) based photo‐anodes were synthesized using a simple electrochemical route and were then evaluated for photoelectrochemical (PEC) activity. The amalgamation of Ag and Au nanoclusters broadens the UV‐Vis light absorption in the range of 400 nm to 650 nm. Ag−Au/ZNRs photo‐anodes had shown photocurrent density of ∼1.4 mA cm −2 , at a bias of 0.75 V/SCE, which is ∼3.1 times of bare ZNRs photo‐anode. Bi‐metallic Ag−Au/ZNRs based photo‐anode shows the maximum photo‐conversion efficiency of 0.77 % at 0.5 V/SCE, under one sun illumination. Formation of hot electrons in Ag−Au/ZNRs photo‐anodes can be partly held responsible for the enhanced PEC activity. Au/Ag core/shell morphology evolves when a thin layer of Ag is loaded on Au nanoparticles. For an in‐depth analysis on Ag−Au incorporated ZNRs based photo‐anodes and its PEC activity, a detailed characterization was carried out using physico‐chemical, spectral and microscopy techniques. The analysis shows that Au in direct contact with ZnO interacts mainly with oxygen vacancies present on surface of ZnO and Ag interacts with Au for an effective electron‐hole segregation process at their interface and electron storage occurs in metal nanoparticles. The results suggest bi‐metal incorporated ZNRs based photo‐anodes can be a prospective candidate for PEC water splitting application.

Sharma, Vidhika↗

Understanding Superatomic Ag Nanohydrides

Abstract Bulk Ag hydrides are extremely challenging to make even at very high pressures, but they may become stable as the particle size shrinks to the nanometer regime. Here, the formation and electronic structure of Ag nanohydrides are investigated from a superatomic perspective by density functional theory. It is found that as the coverage increases, adsorption energy of hydrogen atoms on Ag 38 cluster to form Ag 38 H 2 n nanohydride ( n is from 1 to 15) can be energetically favorable with respect to bare Ag 38 and H 2 . Furthermore, the adsorbed hydrogen atoms contribute their 1s electrons to the superatom electron count and behave as a metal instead of a ligand. The electronic structure of the silver nanohydrides follows the superatomic complex model, leading to magic or relatively more stable compositions such as Ag 38 H 2 , Ag 38 H 20 , and Ag 38 H 30 , which correspond to 40‐electron, 58‐electron, and 68‐electron shell closings, respectively. Angular momentum analyses of the superatomic orbitals suggest a convoluted interaction of geometry, symmetry, and orbital splitting.

He, Xiang↗

Effect of Ag Addition on the Surface Topography and the Vibrational Dynamics of MgB{sub 2}

We fabricated MgB{sub 2} samples with Ag additions using in situ solid-state reaction via a single-step sintering to study the effect of Ag on the structural, vibration, and superconducting properties of MgB{sub 2} samples. Ag addition to MgB{sub 2} resulted in a significant improvement in J{sub c} although no appreciable effect was observed in the lattice parameters and the superconducting transition temperature T{sub c}. Dramatic increase in the grain size was observed with Ag addition and topographic measurements with atomic force microscopy revealed the formation of Ag–Mg nanoparticles 5–20 nm in size at 2 and 4 wt% Ag additions. The fact that these samples showed high J{sub c} values suggests that the nanoparticles formed as a result of Ag addition are responsible for enhanced flux pinning. Raman spectroscopy measurements showed that Ag additions also increased disorder in the system and thereby affected the line width of the Raman active E{sub 2g} mode.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Morphology and Mechanical, Corrosive, and Antibacterial Behaviors of Indirectly Extruded Zn-0.05wt.%Mg-(0.5, 1 wt.%)Ag Alloys

Biodegradable Zn-0.05Mg-(0.5, 1 wt.%) Ag alloy was manufactured by indirectly extruding the alloy ingot at 200 °C with an extrusion ratio of 16:1. Dynamic recrystallization took place during the extrusion process, leading to the formation of equiaxed crystals with twins in both cross-sectional and longitudinal direction. There was no detectable Ag-related phase present except the Mg{sub 2}Zn{sub 11} in the alloys. Tensile strength was increased with an increase in Ag content, reaching 202 MPa when Ag content is 1 wt.%. As-extruded Zn-0.05Mg-0.5Ag showed better corrosion performance with a low corrosion current density of 2.2 A/cm{sup 2} and low corrosion rate of 0.15 mm/year. The antibacterial property improved for both Staphylococcus aureus (S. aureus) and Escherichia coli (E. coli) by addition of Ag. The antibacterial rates were more than 99% when Ag content is up to 1 wt.%. The biodegradable Zn-Mg-Ag alloys with high antibacterial behavior show great potential in medical devices.

36 MATERIALS SCIENCE↗

High-throughput characterization of Ag–V–O nanostructured thin-film materials libraries for photoelectrochemical solar water splitting

Ag–V–O thin-film materials libraries, with both composition (Ag 22-77 V 23-78 O x ) and thickness (123–714 nm) gradients were fabricated using combinatorial reactive magnetron co-sputtering aiming on establishing relations between composition, structure, and functional properties. As-deposited libraries were annealed in air at 300 °C for 10 h. High-throughput characterization methods of composition, structure and functional properties were used to identify photoelectrochemically active regions. The phases AgV 6 O 15 , Ag 2 V 4 O 11 , AgVO 3 , and Ag 4 V 2 O 7 were observed throughout the composition gradient. The photoelectrochemical properties of Ag–V–O films are dependent on composition and morphology. An enhanced photocurrent density (~300–554 μA/cm 2 ) was obtained at 30 to 45 at.% Ag along the thickness gradient. Thin films of these compositions show a nanowire morphology, which is an important factor for the enhancement of photoelectrochemical performance. The photoelectrochemically active regions were further investigated by high-throughput synchrotron-X-ray diffraction and transmission electron microscopy (Ag 32 V 68 O x ) which confirmed the presence of Ag 2 V 4 O 11 as the dominating phase along with the minor phases AgV 6 O 15 and AgVO 3 . This enhanced photoactive region shows bandgap values of ~2.30 eV for the direct and ~1.87 eV for the indirect bandgap energies. Finally, the porous nanostructured films improve charge transport and are hence of interest for photoelectrochemical water splitting.

36 MATERIALS SCIENCE↗

On AgRhO{sub 2}, and the new quaternary delafossites AgLi{sub 1/3}M{sub 2/3}O{sub 2}, syntheses and analyses of real structures

Two new quaternary delafossite type oxides with the general formula Ag(Li{sub 1/3}M{sub 2/3})O{sub 2}, M=Rh, Ir, have been synthesized, and their structures characterized. Based on X-ray and electron diffraction analyses the structural similarity with AgRhO{sub 2} delafossite, has been evidenced. The real structures of the quaternary delafossites have been revealed, which has allowed to fully explain the diffuse scattering as observed in X-ray powder diffraction. AgRhO{sub 2} is thermally stable up to 1173 K, the behavior of the two quaternary compounds AgLi{sub 1/3}Rh{sub 2/3}O{sub 2} and AgLi{sub 1/3}Ir{sub 2/3}O{sub 2} is comparable, and they decompose above 950 and 800 K, respectively. AgRhO{sub 2} shows temperature independent paramagnetism, while for the other two an effective magnetic moment of 1.77{mu}{sub B} for Ir, and 1.70{mu}{sub B} for Rh were determined, applying the Curie-Weiss law. All compounds are semiconducting with activation energies of 4.97 kJ mol{sup -1} (AgLi{sub 1/3}Rh{sub 2/3}O{sub 2}), 11.42 kJ mol{sup -1} (AgLi{sub 1/3}Ir{sub 2/3}O{sub 2}) and 17.58 kJ mol{sup -1} (AgRhO{sub 2}). -- graphical abstract: Two new quaternary delafossite type oxides with the general formula Ag(Li{sub 1/3}M{sub 2/3})O{sub 2}, M=Rh, Ir, have been synthesized, and their structures characterized. The real structures of the quaternary delafossites have been revealed, which has allowed to fully explain the diffuse scattering as observed in X-ray powder diffraction. Display Omitted Highlights: {yields}Analysis of the real structures of the Ag(Li{sub 1/3}Rh{sub 2/3})O{sub 2} and Ag(Li{sub 1/3}Ir{sub 2/3})O{sub 2}. {yields} Diffuse scattering has been rationalized by severe disorder in the stacking sequences. {yields} The oxygen atom layer stacking sequence needs to change.

36 MATERIALS SCIENCE↗

Fabrication of Cu-Ag core-shell bimetallic superfine powders by eco-friendly reagents and structures characterization

Superfine bimetallic Cu-Ag core-shell powders were synthesized by reduction of copper sulfate pentahydrate and silver nitrate with eco-friendly ascorbic acid as a reducing agent and cyclodextrins as a protective agent in an aqueous system. The influence of Ag/Cu ratio on coatings was investigated. Ag was homogeneously distributed on the surface of Cu particles at a mole ratio of Ag/Cu=1. FE-SEM showed an uniformity of Ag coatings on Cu particles. Antioxidation of Cu particles was improved by increasing Ag/Cu ratio. TEM-EDX and UV-vis spectra also revealed that Cu cores were covered by Ag nanoshells on the whole. The surface composition analysis by XPS indicated that only small parts of Cu atoms in the surface were oxidized. It was noted that the hindrance of cyclodextrins chemisorbed on particles plays an important role in forming high quality and good dispersity Cu-Ag (Cu-Ag) core-shell powders. - Graphical abstract: Mechanism of fabricating Cu-Ag particles with good dispersibility using {beta}-CDs as a protective agent was studied because of its special structure. Highlights: > Green supramolecular {beta}-CD used as a protective agent and ascorbic acid(Vc) as a reducing agent to fabricate Cu-Ag powders. > Particles are monodisperse and the diameter is close to nanoscale(100-150 nm). > Resistance of Cu particles to oxidation was higher. > Formation mechanism explained.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Liquidus projection of the Ag-Ba-Ge system and melting points of clathrate type-I compounds

The liquidus and solidus projection has been constructed for the Ag-Ba-Ge system up to 33.3 at% Ba, using electron micro probe analysis (EPMA), X-ray powder diffraction (XRD) and differential thermal analysis (DSC/DTA). Eight different primary crystallization regions were found: (Ge), Ba{sub 8}Ag{sub x}Ge{sub 46-x-y}{open_square}{sub y} ({kappa}{sub I}) ({open_square} is a vacancy), Ba{sub 6}Ag{sub x}Ge{sub 25-x} ({kappa}{sub Ix}), BaGe{sub 2}, Ba(Ag{sub 1-x}Ge{sub x}){sub 2} ({tau}{sub 1}), BaAg{sub 2-x}Ge{sub 2+x} ({tau}{sub 2}) BaAg{sub 5} and (Ag). The ternary invariant reactions have been determined for the region investigated and are the basis for a Schulz-Scheil diagram. The second part of this work provides a comprehensive compilation of melting points of ternary A{sub 8}T{sub x}M{sub 46-x} and quaternary (A=Sr, Ba, Eu; T=Ni, Pd, Pt, Cu, Ag, Au, Zn, Cd, B, Al, Ga; M=Si, Ge, Sn) clathrate type-I compounds and decomposition temperatures of inverse clathrate type-I Ge{sub 38}{l_brace}P,As,Sb{r_brace}{sub 8}{l_brace}Cl,Br,I{r_brace}{sub 8}, Si{sub 46-x}P{sub x}Te{sub y} and tin based compounds. - Graphical Abstract: Partial liquidus projection of the Ag-Ba-Ge system. Highlights: Black-Right-Pointing-Pointer The liquidus and solidus projection has been constructed for the Ag-Ba-Ge system up to 33.33 at% Ba. Black-Right-Pointing-Pointer Eight different primary crystallization fields have been found. Black-Right-Pointing-Pointer All the ternary compounds form congruently from the melt. Black-Right-Pointing-Pointer The ternary invariant reactions have been determined and are the basis for a Schulz-Scheil diagram.

36 MATERIALS SCIENCE↗

Cooling thermal parameters and microstructure features of directionally solidified ternary Sn–Bi–(Cu,Ag) solder alloys

Low temperature soldering technology encompasses Sn–Bi based alloys as reference materials for joints since such alloys may be molten at temperatures less than 180 °C. Despite the relatively high strength of these alloys, segregation problems and low ductility are recognized as potential disadvantages. Thus, for low-temperature applications, Bi–Sn eutectic or near-eutectic compositions with or without additions of alloying elements are considered interesting possibilities. In this context, additions of third elements such as Cu and Ag may be an alternative in order to reach sounder solder joints. The length scale of the phases and their proportions are known to be the most important factors affecting the final wear, mechanical and corrosions properties of ternary Sn–Bi–(Cu,Ag) alloys. In spite of this promising outlook, studies emphasizing interrelations of microstructure features and solidification thermal parameters regarding these multicomponent alloys are rare in the literature. In the present investigation Sn–Bi–(Cu,Ag) alloys were directionally solidified (DS) under transient heat flow conditions. A complete characterization is performed including experimental cooling thermal parameters, segregation (XRF), optical and scanning electron microscopies, X-ray diffraction (XRD) and length scale of the microstructural phases. Experimental growth laws relating dendritic spacings to solidification thermal parameters have been proposed with emphasis on the effects of Ag and Cu. The theoretical predictions of the Rappaz-Boettinger model are shown to be slightly above the experimental scatter of secondary dendritic arm spacings for both ternary Sn–Bi–Cu and Sn–Bi–Ag alloys examined. - Highlights: • Dendritic growth prevailed for the ternary Sn–Bi–Cu and Sn–Bi–Ag solder alloys. • Bi precipitates within Sn-rich dendrites were shown to be unevenly distributed. • Morphology and preferential region for the Ag{sub 3}Sn growth depend on Ag content and Ṫ{sub L}. • Rappaz-Boettinger model reasonably estimated the experimental scatter of λ{sub 2}.

36 MATERIALS SCIENCE↗

Morphology-controlled synthesis of Ag{sub 3}PO{sub 4} nano/microcrystals and their antibacterial properties

Graphical abstract: The Ag{sub 3}PO{sub 4} with rhombic dodecahedral, spherical and small size particles were controllable fabricated just by changing the types of the solvent. The materials possess good antibacterial properties toward different kinds of bacteria. - Highlights: • The Ag{sub 3}PO{sub 4} with three morphologies were controllable fabricated. • The Ag{sub 3}PO{sub 4} as-prepared possess obvious antibacterial properties in the dark. • The antibacterial ability of Ag{sub 3}PO{sub 4} could be greatly improved under the visible light irradiation. - Abstract: We reported the controllable fabrication of Ag{sub 3}PO{sub 4} nano/microcrystals through a simple solution-based precipitation reaction. The samples were characterized by X-ray powder diffraction, scanning electron microscopy, transmission electron microscopy and infrared spectroscopy. The results indicated that the Ag{sub 3}PO{sub 4} crystals with three different morphology, including the rhombic dodecahedron of 500 nm, the sphere of 100 nm and the particles with small-size of 20 nm, could be obtained in the solvents of water, ethylene glycol (EG) and dimethyl sulfoxide (DMSO). The antibacterial assay showed that all samples possess obvious antibacterial properties. In addition, the Ag{sub 3}PO{sub 4} with small size of 20 nm showed better activity due to their high specific surface areas. Notably, we have found that the antibacterial ability of Ag{sub 3}PO{sub 4} could be greatly improved under the visible light irradiation, which are superior to that in the dark and commercial streptomycin.

36 MATERIALS SCIENCE↗

Facile synthesis of pompon-like ZnO-Ag nanocomposites and their enhanced photocatalytic performance

Graphical abstract: - Highlights: • Pompon-like ZnO-Ag was prepared via heterothermal and photodeposition method. • Pompon-like ZnO-Ag is a excellent photocatalyst for degradation of azo dyes. • The photocatalytic and wetting properties were studied upon UV irradiation. • The discoloring efficiency of ZnO-Ag heterostructure toward to azo dyes is 99.1%. - Abstract: A series of pompon-like ZnO-Ag nanocomposites were prepared by hydrothermal method and photochemical deposition technique. Several characterizations indicated the successful deposition of Ag nanoparticles on ZnO. As a whole, the as-prepared composites present pompon-like nanostructures with a diameter of ∼10 μm. In detail, the nanostructural, chemical and optical properties were characterized by scanning electron microscopy (SEM), transmission electron microscopy (TEM), X-ray diffraction (XRD), infrared spectroscopy (IR), ultra-visible spectra (UV). The photocatalytic degradation experiments under UV irradiation using Methyl Orange (MO) as a model dye were executed here. The relative results demonstrated that the pompon-like ZnO-Ag nanocomposite with a suitable content of Ag nanoparticles (about 4.82 wt%) has the highest photochemical activity, and the removal ratio of MO was 99.1% after 0.5 h adsorption and subsequent 2 h photodegradation processes. The excellent photocatalytic performance was attributed to the high surface areas of ZnO nanostructure and effectively separation of photo-generated charge on flower-like ZnO by employing Ag nanoparticles as a conductor.

36 MATERIALS SCIENCE↗

Fabrication and characterization of n-ZnO:Eu/p-ZnO:(Ag, N) homojunction by spray pyrolysis

Graphical abstract: In this paper authors report the fabrication of ZnO homojunction by the deposition of 2 at.% Eu doped ZnO (n-ZnO:Eu) layer grown over the 4 at.% Ag–N dual acceptor doped ZnO (p-ZnO:(Ag, N)) layer by spray pyrolysis technique. The as-grown n-type and p-type ZnO films on glass substrates have been characterized by Hall measurements, X-ray diffraction (XRD), energy dispersive spectroscopy (EDS), UV–vis and luminescence spectroscopy techniques. Hall measurement shows that 4 at.% ZnO:(Ag, N) film exhibits p-type conductivity with high hole concentration of 2.17 × 10{sup 18} cm{sup −3} and n-type conductivity is observed in the ZnO:Eu film. The current–voltage characteristics measured from the two-layer structure show typical rectifying characteristics of p–n homojunction with a low turn on voltage of about 1.85 V. I–V characteristics of the n-ZnO:Eu/p-ZnO:(Ag, N) homojunction. - Highlights: • The n-ZnO:Eu/p-ZnO:(Ag, N) homojunction is fabricated and characterized. • Low resistive and stable p-type ZnO films are achieved by dual acceptor-doping. • Homojunction with best dual-doped ZnO film shows good rectifying characteristics. • The fabricated ZnO homojunction is suitable for optoelectronic devices. - Abstract: In the present study, the authors report the fabrication of ZnO homojunction by the deposition of 2 at.% Eu doped ZnO (n-ZnO:Eu) layer grown over the 4 at.% Ag–N dual acceptor doped ZnO (p-ZnO:(Ag, N)) layer by spray pyrolysis technique. The as-grown n-type and p-type ZnO films on glass substrates have been characterized by Hall measurements, X-ray diffraction (XRD), energy dispersive spectroscopy (EDS), UV–vis and luminescence spectroscopy techniques. Hall measurement shows that 4 at.% ZnO:(Ag, N) film exhibits p-type conductivity with high hole concentration of 2.17 × 10{sup 18} cm{sup −3} and n-type conductivity is observed in the ZnO:Eu film. The current–voltage characteristics measured from the two-layer structure show typical rectifying characteristics of p–n homojunction with a low turn on voltage of about 1.85 V.

36 MATERIALS SCIENCE↗

Three-dimensional Ag{sub 2}O/WO{sub 3}·0.33H{sub 2}O heterostructures for improving photocatalytic activity

Highlights: • Ag{sub 2}O/WO{sub 3}·0.33H{sub 2}O 3D network heterostructures are prepared via a simple precipitatation method. • Ag{sub 2}O/WO{sub 3}·0.33H{sub 2}O networks exhibit much enhanced photocatalytic activity. • High photocatalytic activity is attributed to its heterostructure and 3D architectures. - Abstract: Three-dimensional Ag{sub 2}O/WO{sub 3}·0.33H{sub 2}O heterostructures were fabricated by loading Ag{sub 2}O nanoparticles on WO{sub 3}·0.33H{sub 2}O 3D networks via a simple chemical precipitation method. The Ag{sub 2}O/WO{sub 3}·0.33H{sub 2}O heterostructures exhibited much enhanced photocatalytic activity for the degradation of methylene blue (MB) under simulated solar light irradiation. The optimal molar ratio of Ag{sub 2}O and WO{sub 3}·0.33H{sub 2}O is 1:2. The outstanding photocatalytic activity of the Ag{sub 2}O/WO{sub 3}·0.33H{sub 2}O can be attributed to its large surface area of the three-dimensional networks, the enhanced sunlight absorption and the prevention of electrons–holes combination from the heterostructures. The experiment result demonstrates that wide band gap semiconductor (WO{sub 3}·0.33H{sub 2}O) modified by narrow band gap metal oxide (Ag{sub 2}O) with 3D architecture will be an effective route to enhance its photocatalytic activity.

36 MATERIALS SCIENCE↗