Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “ACTIVATION ENERGY”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 289 records · Page 16

Electrical transport properties of manganese containing pyrochlore type semiconducting oxides using impedance analyses

Graphical abstract: DC conductivity variation of CaCe{sub 1−x}Mn{sub x}SnNbO{sub 7−δ} (x = 0, 0.2, 0.4 and 0.6) with inverse of temperature. Variation of conductivity with Mn concentration at 600 °C is shown in the inset. Display Omitted Highlights: ► We have observed that the structural ordering as well as grain size increase with Mn substitution. ► Impedance analysis proved that a correlated barrier hopping type conduction mechanism is involved in the materials. ► Activation energy as well as electrical conductivity increases with increase in Mn substitution. ► Localization of electrons associated with Mn{sup 2+} and structural ordering are the key factors for the increased activation energy with Mn substitution. ► All the materials showed good NTC thermistor properties. -- Abstract: A new series of manganese containing pyrochlore type semiconducting oxides CaCe{sub 1−x}Mn{sub x}SnNbO{sub 7−δ} (x = 0, 0.2, 0.4 and 0.6) have been synthesized to study the effect of Mn substitution on the structure, microstructure and electrical properties of these samples. X-ray diffraction and scanning electron microscopy studies revealed an increase of structural ordering and grain size respectively with increase of Mn substitution. Rietveld analysis and Raman spectroscopy were also employed to corroborate the XRD results. The bulk resistance measurements with temperature exhibit negative temperature coefficient behavior. The impedance analysis of the samples revealed a non-Debye type relaxation existed in the materials. The ac conductivity variation with temperature and frequency indicates a correlated barrier hopping type conduction mechanism in these materials. The barrier height and the intersite separation for hopping influence the electrical conductivity of these samples and are found to be a function of localization of electrons associated with the Mn{sup 2+} ions and the unit cell volume respectively. The Mn substitution increases both electrical conductivity and activation energy contrastingly. This unusual behavior has been explained by correlating the structure, microstructure, defect states, electron localization and intersite separation with the conductivity data of the samples.

36 MATERIALS SCIENCE↗

Levitation of objects using acoustic energy

Activated sound source establishes standing-wave pattern in gap between source and acoustic reflector. Solid or liquid material introduced in region will move to one of the low pressure areas produced at antinodes and remain suspended as long as acoustic signal is present.

Whymark, R. R.↗

Electrical conduction mechanism of LaNi{sub x}Me{sub 1−x}O{sub 3−δ} (Me = Fe, Mn)

Graphical abstract: Compositional dependence of (a) electrical conductivity and (b) E{sub a} for hopping conduction of LaNi{sub x}Me{sub 1−x}O{sub 3} (Me = Fe, Mn). - Highlights: • Electrical conduction mechanism of LaNi{sub x}Me{sub 1−x}O{sub 3} (Me = Fe, Mn) was investigated. • Hopping conduction model could be applied for conductivity of both specimens. • The difference of E{sub a} due to that of energy level of Fe and Mn was observed. • Hole concentration estimated by iodimetry increases with increasing Ni content. - Abstract: Electrical conduction mechanism of LaNi{sub x}Fe{sub 1−x}O{sub 3−δ} and LaNi{sub x}Mn{sub 1−x}O{sub 3+δ} expected as Sr-free new cathode material for solid oxide fuel cells was analyzed. Electrical conduction behaviors of both specimens could be well fitted by small polaron hopping conduction model. The electrical conductivity of LaNi{sub x}Fe{sub 1−x}O{sub 3−δ} increased with increasing Ni content, showing agreement with decrease of activation energy for hopping conduction. The decrease of electrical conductivity and increase of activation energy of LaNi{sub x}Mn{sub 1−x}O{sub 3+δ} were observed with increasing Ni content for 0.0 ≤ x ≤ 0.4. Further Ni substitution increased electrical conductivity and decreased activation energy for 0.4 ≤ x ≤ 0.6. It was revealed using iodometry that the difference of hole carrier density between LaNi{sub x}Fe{sub 1−x}O{sub 3−δ} and LaNi{sub x}Mn{sub 1−x}O{sub 3+δ} was small. It was suspected that the origin of the difference of electrical conduction behavior of LaNi{sub x}Fe{sub 1−x}O{sub 3−δ} and LaNi{sub x}Mn{sub 1-x}O{sub 3+δ} was difference of energy level of e{sub g} band composed of Fe 3d or Mn 3d orbitals and their overlapping quantity with O 2p and Ni 3d band.

36 MATERIALS SCIENCE↗

Pyrolysis reaction models of waste tires: Application of Master-Plots method for energy conversion via devolatilization

Highlights: • Pyrolysis kinetics of waste tire was studied. • Activation energy was obtained using model free methods. • Master Plots were used to predict pyrolysis reaction model. • Reaction model was in a good agreement with experimental data. - Abstract: Land applied disposal of waste tires has far-reaching environmental, economic, and human health consequences. Pyrolysis represents a potential waste management solution, whereby the solid carbonaceous residue is heated in the absence of oxygen to produce liquid and gaseous fuels, and a solid char. The design of an efficient conversion unit requires information on the reaction kinetics of pyrolysis. This work is the first to probe the appropriate reaction model of waste tire pyrolysis. The average activation energy of pyrolysis was determined via iso-conversional methods over a mass fraction conversion range between 0.20 and 0.80 to be 162.8 ± 23.2 kJ mol{sup −1}. Using the Master Plots method, a reaction order of three was found to be the most suitable model to describe the pyrolytic decomposition. This suggests that the chemical reactions themselves (cracking, depolymerization, etc.), not diffusion or boundary layer interactions common with carbonaceous biomasses, are the rate-limiting steps in the pyrolytic decomposition of waste tires.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Crystal structures and thermodynamics/kinetics of Zn(II) coordination polymers with helical chains

Solvothermal reactions of Zn(II) acetates and four V-shaped carboxylates ligands in the presence of 1,4-Bis(2-methyl-imidazol-1-yl)butane afforded four interesting Zn(II) coordination polymers with helical chains, namely, {[Zn(bib)(atibdc)]·2H_2O}{sub n} (1), {[Zn(bib)(atbip)]·H_2O}{sub n} (2), {[Zn(bib)(2,2′-tda)]}{sub n} (3) and {[Zn(bib)(5-tbipa)]·EtOH}{sub n} (4), (H{sub 2}atibdc=5-amino-2,4,6-triiodoisophthalic acid, H{sub 2}atbip=5-amino-2,4,6-tribromoisophthalic acid, 2,2′-H{sub 2}tad=2,2′-thiodiacetic acid, 5-H{sub 2}tbipa=5-tert-butyl-isophthalic acid). 1 reveals a 3D chiral framework with three kinds of helical chains along a, b and c axis. 2 shows a 2D step-type chiral framework with right-handed helical chains. 3 displays a wavelike 2D layer network possessing alternate left- and right-handed helical chains. 4 presents a four-connected 3D framework with zigzag and meso-helical chains. The different spacers and substituent group of carboxylic acid ligands may lead to the diverse network structures of 1–4. The fluorescent properties of complexes 1−4 were studied. In addition, the thermal decompositions properties of 1–4 were investigated by simultaneous TG/DTG–DSC technique. The apparent activation energy E and the pre-exponential factor (A) of skeleton collapse for the complexes 1–4 are calculated by the integral Kissinger's method and Ozawa–Doyle's method. The activation energy E (E{sub 1}=209.658 kJ·mol{sup −1}, E{sub 2}=250.037 kJ mol{sup −1}, E{sub 3}=225.300 kJ mol{sup −1}, E{sub 4}=186.529 kJ·mol{sup −1}) demonstrates that the reaction rate of the melting decomposition is slow. The thermodynamic parameters (ΔH{sup ‡}, ΔG{sup ‡} and ΔS{sup ‡}) at the peak temperatures of the DTG curves were also calculated. ΔG{sup ‡}>0 indicates that the skeleton collapse is not spontaneous. ΔH{sub d}>0 suggests that the skeleton collapse is endothermic, corresponding to the intense endothermic peak of the DSC curve. The structural stability could be illustrated from the point of thermodynamics and kinetics. - Graphical abstract: Four new zinc coordination architectures constructed from the primary ligand bib, transition metal ions Zn(II) and four V-shaped carboxylate coligands. The different structural evolutions of complexes 1–4 have systematically illustrated that the carboxylate coligands play a critical role in the assemblies of the CPs. Their thermal decompositions properties of 1–4 were investigated by simultaneous TG/DTG–DSC technique. The apparent activation energy E and the pre-exponential factor (A) of skeleton collapse for the complexes 1−4 are calculated by the integral Kissinger’s method and Ozawa–Doyle’s method. The structural stability could be illustrated from the point of thermodynamics and kinetics. Display Omitted.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Electromigration study of copper lines on steps prepared by a plasma-based etch process

The electromigration phenomenon of the copper line etched with a plasma-based process over the SiN{sub x} step has been investigated. Two important factors, i.e., the dielectric topography and the stress temperature, were examined using the accelerated isothermal electromigration method. The activation energy of 0.73 eV to 0.89 eV indicates two possible mass transport pathways: interfacial and copper surface diffusions. The copper line on the SiN{sub x} step has a shorter lifetime and a smaller activation energy than the copper line on the flat surface has. For the former, voids were formed at the cusp region and perpendicular to the current flow direction. For the latter, voids were formed in series and parallel to the current flow direction. The ''neck'' structure at the cusp region, which is a result of the inappropriate etching condition, further decreased the lifetime and the activation energy. The lifetime of the ''neck-free'' copper line over the SiN{sub x} step was estimated to be 7.1 x 10{sup 9} s under the high-speed IC operation condition. The thermal stress mismatch between the copper layer and TiW barrier layer as well as the underneath dielectric layer facilitated the void formation. The step effect on the lifetime was reduced when the test temperature was high because of the change of the local stress. In summary, the topography and the test temperature are critical factors for the copper line's lifetime.

36 MATERIALS SCIENCE↗

Magnetic order and energy-scale hierarchy in artificial spin-ice structures

In order to explain and predict the properties of many physical systems, it is essential to understand the interplay of different energy scales. Here we present investigations of the magnetic order in thermalized artificial spin-ice structures, with different activation energies of the interacting Ising-like elements. We image the thermally equilibrated magnetic states of the nanostructures using synchrotron-based magnetic microscopy. By comparing results obtained from structures with one or two different activation energies, we demonstrate a clear impact on the resulting magnetic order. The differences are obtained by the analysis of the magnetic spin structure factors, in which the role of the activation energies is manifested by distinct short-range order. Furthermore, these results highlight the potential of artificial spin-ice structures to serve as model systems for designing various energy-scale hierarchies and investigating their impact on the collective dynamics and magnetic order.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Characterization of deep level defects and thermally stimulated depolarization phenomena in La-doped TlInS{sub 2} layered semiconductor

Lanthanum-doped high quality TlInS{sub 2} (TlInS{sub 2}:La) ferroelectric-semiconductor was characterized by photo-induced current transient spectroscopy (PICTS). Different impurity centers are resolved and identified. Analyses of the experimental data were performed in order to determine the characteristic parameters of the extrinsic and intrinsic defects. The energies and capturing cross section of deep traps were obtained by using the heating rate method. The observed changes in the Thermally Stimulated Depolarization Currents (TSDC) near the phase transition points in TlInS{sub 2}:La ferroelectric-semiconductor are interpreted as a result of self-polarization of the crystal due to the internal electric field caused by charged defects. The TSDC spectra show the depolarization peaks, which are attributed to defects of dipolar origin. These peaks provide important information on the defect structure and localized energy states in TlInS{sub 2}:La. Thermal treatments of TlInS{sub 2}:La under an external electric field, which was applied at different temperatures, allowed us to identify a peak in TSDC which was originated from La-dopant. It was established that deep energy level trap BTE43, which are active at low temperature (T ≤ 156 K) and have activation energy 0.29 eV and the capture cross section 2.2 × 10{sup −14} cm{sup 2}, corresponds to the La dopant. According to the PICTS results, the deep level trap center B5 is activated in the temperature region of incommensurate (IC) phases of TlInS{sub 2}:La, having the giant static dielectric constant due to the structural disorders. From the PICTS simulation results for B5, native deep level trap having an activation energy of 0.3 eV and the capture cross section of 1.8 × 10{sup −16} cm{sup 2} were established. A substantial amount of residual space charges is trapped by the deep level localized energy states of B5 in IC-phase. While the external electric field is applied, permanent dipoles, which are originated from the charged B5 deep level defects, are aligned in the direction of the applied electric field and the equilibrium polarization can be reached in a relatively short time. When the polarization field is maintained, while cooling the temperature of sample to a sufficiently low degrees, the relaxation times of the aligned dipoles drastically increases. Practically, frozen internal electric field or electrets states remain inside the TlInS{sub 2}:La when the applied bias field is switched off. The influence of deep level defects on TSDC spectra of TlInS{sub 2}:La has been revealed for the first time.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Electric-field dependence of photocarrier generation efficiency of organic photoconductors

The electric-field dependence of photocarrier generation efficiency has been investigated in several different types of organic photoconductor for electrophotography to elucidate the controlling factors of light-to-electrical energy conversion. The rate-determining step in generating photocarriers has been considered to be the charge transfer between two neighboring molecules. Overall photocarrier generation efficiency has been determined using the charge transfer velocity at the rate-determining step as a function of electric-field-dependent activation energy, which is influenced by the symmetry factor α and the energy gap ΔE. The formula used successfully fits the experimental data for different types of organic photoconductor over a wide field strengths range. From the fitting results of high-sensitivity photoconductors, the zero-field activation energy is small and the reactant lifetime is long. In addition, ΔE is zero, which implies that the hole-electron interaction in the reactant is negligible at the rate-determining step. In contrast, for low-sensitivity photoconductors, the zero-field activation energy is large and the reactant lifetime is short; however, ΔE < 0 and α > 0.5, which suggest that the hole-electron interaction is not negligible. Consequently, the proposed formula well explains the electric-field dependence of photocarrier generation efficiency on the basis of its controlling factors.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Correlation between electrical properties and thermodynamic stability of ACoO{sub 3-{delta}} perovskites (A= La, Pr, Nd, Sm, Gd)

For perovskites with the general formula ACoO{sub 3-{delta}} (A = La, Pr, Nd, Sm, and Gd) the influence of the A-site cation on the electrical conductivity, electronic structure, thermodynamic stability, and oxygen stoichiometry was studied. The perovskite oxide powders were produced by a combined citric acid and ethylenediaminetetraacetic acid complexing method. Ceramic specimens sintered at 1100 deg. C in air were single-phase perovskites. With increasing temperature, the electrical conductivity shows three discrete regimes. All compositions show semiconductivity up to a transition temperature of {approx}300 deg. C-450 deg. C and then behave like metallic conductors. The activation energies for the semiconductivity, as well as the transition temperatures to the metallic-like conduction, decrease monotonically with increasing pseudocubic lattice parameters, i.e., with increasing ionic radii of the A cation. This behavior correlates with decreasing oxygen nonstoichiometry and increased thermodynamic stability. The highest conductivity and the lowest activation energy of 0.66 eV were found for LaCoO{sub 3-{delta},} which also had the lowest semiconductor-metal transition temperature at 269 deg. C, the lowest oxygen nonstoichiometry of {delta}= 0.008, and the highest Gibbs free energy change for the decomposition reaction of 42.37 kJ/mol at 850 deg. C. GdCoO{sub 3-{delta}} had the highest oxygen nonstoichiometry with {delta}0.032, a high activation energy of 1.19 eV for the semiconductivity with a high transition temperature at 452 deg. C, and the lowest Gibbs free energy change of 26.54 kJ/mol at 850 deg. C. X-ray absorption spectroscopy data imply an increasing Co low-spin character with decreasing cation radius from La to Gd, while an increase in temperature increases the number of holes or Co 3d bandwidth. This correlates well with the electrical conductivity data.

36 MATERIALS SCIENCE↗

Reaction Kinetics of Water Molecules with Oxygen Vacancies on Rutile TiO 2 (110)

The formation of bridging hydroxyls (OHb) via reactions of water molecules with oxygen vacancies (VO) on reduced TiO 2 (110) surfaces is studied using infrared reflection-absorption spectroscopy (IRAS), electron-stimulated desorption (ESD), and photon-stimulated desorption (PSD). Narrow IRAS peaks at 2737 cm-1 and 3711 cm -1 are observed for stretching vibrations of OD b and OH b on TiO 2 (110), respectively. IRAS measurements with s- and p-polarized light demonstrate that the bridging hydroxyls are oriented normal to the (110) surface. The IR peaks disappear after the sample is exposed to O 2 or annealed in the temperature range of 400 – 600 K (correlating with the temperature at which pairs of OHb’s reform water and then desorb), which is consistent with their identification as bridging hydroxyls. We have studied the kinetics of water reacting with the vacancies by monitoring the formation of bridging hydroxyls (using IRAS) as a function of the annealing temperature for a small amount of water initially dosed on the TiO 2 (110) at low temperature. Separate experiments have also monitored the loss of water molecules (using water ESD) and vacancies (using the CO photooxidation reaction) due to the reactions of water molecules with the vacancies. All three techniques show that the reaction rate becomes appreciable for T > 150 K and that the reactions largely complete for T > 250 K. The temperature-dependent water-VO reaction kinetics are consistent with a Gaussian distribution of activation energies with E a = 0.545 eV, ΔE a (FWHM) = 0.125 eV, and a “normal” prefactor, v = 10 12 s -1 . In contrast, a single activation energy with a physically reasonable prefactor does not fit the data well. Our experimental activation energy is close to theoretical estimates for the diffusion of water molecules along the Ti 5c rows on the reduced TiO 2 (110) surface, which suggests that the diffusion of water controls the water – V O reaction rate.

74 ATOMIC AND MOLECULAR PHYSICS↗

Thermodynamics and kinetics of solution combustion synthesis: Ni(NO 3 ) 2 + fuels systems

Solution combustion synthesis (SCS) utilizes exothermic self-propagating reactions to prepare nanoscale materials that can be used widely in energy, electronics, and biomedical technologies and other applications. SCS is a specific variety of a more general combustion synthesis (CS) method. Investigations of the thermodynamics, kinetics, and the mechanisms of SCS reactions, are not as well studied as the other CS processes. This work reports on a systematic study of the thermodynamics and kinetics of SCS reactions involving Ni(NO 3 ) 2 , an oxidizer, and either glycine (C 2 H 5 NO 2 ) or hexamethylenetetramine (HMT, C 6 H 12 N 4 ) as fuels. A thermodynamic modeling approach, based on the Gibbs free energy minimization principle, is applied to the simultaneous calculations of the adiabatic temperatures and compositions of the equilibrium products. Our calculations reveal the influence of fuel-to-oxidizer ratio, amount of water, and the oxygen in air on the combustion temperature under adiabatic conditions and the composition of the resulting products. We have, in turn, measured the combustion temperature and phase composition of products and compared them with the calculations. Variations of drying times for the solutions yield precursor gels with varying water contents. This approach enables the manipulation of combustion parameters and confirms the use of calculated activation energies for reactions using the Merzhanov-Khaikin method. Here, the results show that SCS reactions in fuel-lean solutions producing NiO have higher activation energy in contrast to reactions with fuel-rich solutions that form Ni. Reduction of activation energies due to the increase in the fuel-to-oxidizer ratio could be related to the observed change of the rate-limiting stages of the endothermic decomposition of the individual reactants to the exothermic decomposition of coordinate compounds formed between the reactants.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Research for preparation of cation-conducting solids by high-pressure synthesis and other methods

It was shown that two body-centered-cubic skeleton structures, the Im3 KSbO3 phase and the defect-pyrochlore phase A(+)B2X6, do exhibit fast Na(+)-ion transport. The placement of anions at the tunnel intersection sites does not impede Na(+)-ion transport in (NaSb)3)(1/6 NaF), and may not in (Na(1+2x)Ta2 5F)(Ox). The activation energies are higher than those found in beta-alumina. There are two possible explanations for the higher activation energy: breathing of the bottleneck (site face or edge) through which the A(+) ions must pass on jumping from one site to another may be easier in a layer structure and/or A(+)-O bonding may be stronger in the cubic structures because the O(2-) ion bonds with two (instead of three) cations of the skeleton. If the former explanation is dominant, a lower activation energy may be achieved by optimizing the lattice parameter. If the latter is dominant, a new structural principle may have to be explored.

Goodenough, J. B.↗

Kinetics of Co Oxidation Catalyzed By Highly Dispersed Ceo (2) -Supported Gold

CeO{sub 2}-supported gold synthesized from Au(CH{sub 3}){sub 2}(acac) (acac: acetylacetonate) catalyzed CO oxidation at 353 K, with a turnover frequency TOF of 6.3 x 10{sup -3} molecules of CO (Au atom s){sup -1} at CO and O{sub 2} partial pressures of 1.0 kPa; the apparent activation energy was 138 {+-} 2 kJ mol{sup -1}. The activity increased as the catalyst functioned in a flow reactor, and after 48 h on stream, the TOF at 298 K and the aforementioned CO and O{sub 2} partial pressures was (5.6 {+-} 0.2) x 10{sup -2} molecules of CO (Au atom s){sup -1}. X-ray absorption spectra, reported separately, showed that the catalyst structure changed during operation, as the mononuclear cationic species present initially formed clusters consisting on average of roughly 15 Au atoms each. The gold clusters were more active for CO oxidation catalysis than the mononuclear gold species. Reaction orders of CO oxidation catalyzed by the sample containing the clusters at 303 K were found to be 0.19 in CO, 0.18 in O{sub 2}, and -0.4 in CO{sub 2}. The apparent activation energy characterizing the catalyst containing the clusters was found to be only about one-third of that characterizing the catalyst incorporating the mononuclear cationic gold.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

A density functional theory model of mechanically activated silyl ester hydrolysis

To elucidate the mechanism of the mechanically activated dissociation of chemical bonds between carboxymethylated amylose (CMA) and silane functionalized silicon dioxide, we have investigated the dissociation kinetics of the bonds connecting CMA to silicon oxide surfaces with density functional calculations including the effects of force, solvent polarizability, and pH. We have determined the activation energies, the pre-exponential factors, and the reaction rate constants of candidate reactions. The weakest bond was found to be the silyl ester bond between the silicon and the alkoxy oxygen atom. Under acidic conditions, spontaneous proton addition occurs close to the silyl ester such that neutral reactions become insignificant. Upon proton addition at the most favored position, the activation energy for bond hydrolysis becomes 31 kJ mol{sup −1}, which agrees very well with experimental observation. Heterolytic bond scission in the protonated molecule has a much higher activation energy. The experimentally observed bi-exponential rupture kinetics can be explained by different side groups attached to the silicon atom of the silyl ester. The fact that different side groups lead to different dissociation kinetics provides an opportunity to deliberately modify and tune the kinetic parameters of mechanically activated bond dissociation of silyl esters.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Prediction of Post-deformation Recrystallization Kinetics in AISI 321 Austenitic Stainless Steel Using Double-Stage Hot Compression

In the present research, a series of double-stage hot compression tests were conducted in the temperature range of 950-1150 °C, strain rates in the range of 0.01-1 s{sup −1}, strain in the range of 0.1-0.3, and inter-pass time range of 3-100 s to evaluate the kinetics of the post-deformation recrystallization in AISI 321 austenitic stainless steel. An Avrami-type kinetics equation has been determined based on the obtained experimental data. Results show that the extent of post-deformation recrystallization increases with increase in inter-pass time, deformation temperature, pre-strain, and strain rate. The calculated activation energy for recrystallization (174 kJ/mol) is lower than the activation energy for static recrystallization of austenitic stainless steels. It is concluded that the both static and metadynamic recrystallization occurred during the inter-pass period. Also, the predicted softening fraction using the proposed kinetics equation agreed well with those obtained from experimental results.

36 MATERIALS SCIENCE↗

Water-Gas Shift Activity of Cu Surfaces and Cu Nanoparticles Supported on Metal Oxides

Oxide supported Cu catalysts show significant activity for the water-gas shift reaction (WGS, CO + H{sub 2}O {yields} H{sub 2} + CO{sub 2}) but their performance is not fully understood and is highly dependent on the synthesis conditions or the nature of the oxide support. This article describes a series of new studies examining the water-gas shift activity of Cu/MgO(1 0 0) surfaces and compares it to the activities found for pure copper systems, Cu nanoparticles in contact with well-defined surfaces of TiO{sub 2}, ZnO, MoO{sub 2} and CeO{sub 2}, and Cu cations present in mixed-metal oxides. Catalytic tests performed over CuFe{sub 2}O{sub 4}, Ce{sub 1-x}Cu{sub x}O{sub 2} or CuMoO{sub 4} show significant WGS activity only when the Cu cations in the mixed-metal oxide are reduced to metallic copper. Thus, Cu nanoparticles were deposited on different oxide surfaces and their WGS activity was measured in a batch reactor (P{sub CO} = 20 Torr; P{sub H{sub 2}O} = 10 Torr; T = 575-650 K). The WGS activity of the Cu nanoparticles supported on MgO(1 0 0) was 2-3 times larger than that of Cu(1 0 0). Even better WGS catalysts were obtained when Cu was deposited on CeO{sub 2}(1 1 1) or TiO{sub 2}(1 1 0). An apparent activation energy of 13.8 kcal/mol was found for the WGS on Cu/MgO(1 0 0). This is smaller than the value of 15.2 kcal/mol observed on Cu(1 0 0), and substantially larger than the values of 7-9 kcal/mol seen for the apparent activation energies of the Cu/CeO2(1 1 1) and Cu/TiO2(1 1 0) catalysts. Post-reaction surface characterization pointed to the lack of O vacancies in the Cu/MgO(1 0 0) catalysts. This is in contrast to results found for Cu/CeO{sub 2}(1 1 1) and Cu/TiO{sub 2}(1 1 0), where the oxide support exhibits a significant concentration of O vacancies as a consequence of the WGS reaction. The oxygen vacancies present in Cu/CeO{sub 2}(1 1 1) and Cu/TiO{sub 2}(1 1 0) help in the dissociation of the water molecule and reduce the apparent activation energy for the WGS process. Such a phenomenon cannot occur on the Cu/MgO(0 0 1) catalysts, and the main steps of the WGS probably take place on the Cu nanoparticles.

36 MATERIALS SCIENCE↗