Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “ACETATES”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 289 records · Page 16

Communication: Observation of dipole-bound state and high-resolution photoelectron imaging of cold acetate anions

We report the observation of a dipole-bound state and a high-resolution photoelectron imaging study of cryogenically cooled acetate anions (CH{sub 3}COO{sup −}). Both high-resolution non-resonant and resonant photoelectron spectra via the dipole-bound state of CH{sub 3}COO{sup −} are obtained. The binding energy of the dipole-bound state relative to the detachment threshold is determined to be 53 ± 8 cm{sup −1}. The electron affinity of the CH{sub 3}COO neutral radical is measured accurately as 26 236 ± 8 cm{sup −1} (3.2528 ± 0.0010 eV) using high-resolution photoelectron imaging. This accurate electron affinity is validated by observation of autodetachment from two vibrational levels of the dipole-bound state of CH{sub 3}COO{sup −}. Excitation spectra to the dipole-bound states yield rotational profiles, allowing the rotational temperature of the trapped CH{sub 3}COO{sup −} anions to be evaluated.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Effect of applied voltage on surface properties of anodised titanium in mixture of β-glycerophosphate (β-GP) and calcium acetate (CA)

Anodic oxidation is a surface modification method which combines electric field driven metal and oxygen ion diffusion for formation of oxide layer on the anode surface. This method has been widely used to modify the surface morphology of biomaterial especially titanium. This study aimed to investigate the effect of applied voltage on titanium. Specifically, the titanium foil was anodised in mixture of β-glycerophosphate disodium salt pentahydrate (β-GP) and calcium acetate monohydrate (CA) with different applied voltage (50-350 V), electrolyte concentration (0.04 M β-GP + 0.4 M CA), anodising time (10minutes) and current density (50 and 70 mA.cm{sup −2}) at room temperature. Surface oxide properties of anodised titanium were characterised by digital single-lens reflex camera (DSLR camera), field emission scanning electron microscope (FESEM) and atomic force microscopy (AFM). At lower applied voltage (≤150 V), surface of titanium foils were relatively smooth. With increasing applied voltage (≥250 V), the oxide layer became more porous and donut-shaped pores were formed on the surface of titanium foils. The AFM results indicated that the surface roughness of anodised titanium increases with increasing of applied voltage. The porous and rough surface is able to promote the osseointegration and reduce the suffering time of patient.

36 MATERIALS SCIENCE↗

Surface properties, crystallinity and optical properties of anodised titanium in mixture of β-glycerophosphate (β-GP) and calcium acetate (CA)

Anodic oxidation is an electrochemical method for the production of ceramic films on a metallic substrate. It had been widely used to deposit the ceramic coatings on the metals surface. This method has been widely used in surface modification of biomaterials especially for dental implants. In this study, the surface morphology, crystallinity and optical properties of titanium foil was modified by anodising in mixture of β-glycerophosphate disodium salt pentahydrate (β-GP) and calcium acetate monohydrate (CA). The experiments were carried out at high voltage (350 V), different anodising time (5 and 10 minutes) and current density (10-70 mA.cm{sup −2}) at room temperature. Anodised titanium was characterised by using field emission scanning electron microscopy (FESEM), X-ray diffractometer (XRD), and UV-Vis spectrometry. The result of the experiment showed that surface morphology, crystallinity and optical properties depended strongly on the current density and anodising time. More porous surface and large amount of anatase and rutile was produced at higher current density and longer anodising time. Apart from that, it is also revealed that the energy band gap of anodised titanium increases as the increase in current density due to the presence of anatase and rutile TiO{sub 2}.

36 MATERIALS SCIENCE↗

Microsolvation of sodium acetate in water: Anion photoelectron spectroscopy and ab initio calculations

To understand the microsolvation of sodium acetate (CH{sub 3}COONa, NaOAc) in water, we studied NaOAc(H{sub 2}O){sub n}{sup −} (n = 0–3) clusters by photoelectron spectroscopy. We also investigated the structures of NaOAc(H{sub 2}O){sub n}{sup −} (n = 0–5) anions and NaOAc(H{sub 2}O){sub n} (n = 0–7) neutrals by quantum chemistry calculations. By comparing the theoretical results with the photoelectron experiment, the most probable structures of NaOAc(H{sub 2}O){sub n}{sup −/0} (n = 0–3) were determined. The study also shows that, with increasing n, the solvent-separated ion pair (SSIP) structures of NaOAc(H{sub 2}O){sub n}{sup −} anions become nearly energetically degenerate with the contact ion pair (CIP) structures at n = 5, while the SSIP structures of the neutral NaOAc(H{sub 2}O){sub n} clusters appear at n = 6 and become dominant at n = 7.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Enhancing the thermal conductivity of ethylene-vinyl acetate (EVA) in a photovoltaic thermal collector

Samples of Ethylene-Vinyl Acetate (EVA) were doped with particles of Boron Nitride (BN) in concentrations ranging from 0-60% w/w. Thermal conductivity was measured using a Differential Scanning Calorimetery (DSC) technique. The thermal conductivity of parent EVA was increased from 0.24 W/m ⋅ K to 0.80 W/m ⋅ K for the 60% w/w sample. Two PV laminates were made; one using the parent EVA the other using EVA doped with 50% BN. When exposed to a one directional heat flux the doped laminate was, on average, 6% cooler than the standard laminate. A finite difference model had good agreement with experimental results and showed that the use of 60% BN composite achieved a PV performance increase of 0.3% compared to the standard laminate.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Electro–optical properties of poly(vinyl acetate)/polyindole composite film

In present work, electrical and optical properties of poly(vinyl acetate)/polyindole (PVAc/PIN) composite film are reported. The prepared composite was characterized via X–ray diffraction (XRD), UV–Vis spectroscopy and DC conductivity measurements. The polymer chain separation was determined using XRD analysis. An attempt has been made to study the temperature dependence of DC conductivity of PVAc/PIN composite in temperature range 308–373 K. The DC conductivity initially increases and reaches to 2.45×10–7 S/cm. The optical band gap value of composite is determined as 4.77 eV. The semiconducting nature of composite observed from electronic as well as optical band gap and Arrhenius behavior of DC plot.

36 MATERIALS SCIENCE↗

Modification of cellulose acetate nanocomposite with TiO{sub 2}-organoclay as nanofiller and its self-photodegradation study

Nanocomposite cellulose acetate has been synthesized using organoclay nanofiller modified with TiO{sub 2}. Tapanuli bentonite was previously subjected to purification and sodium exchangeprocesses, then modified with TiO{sub 2},that was added as much as 0%, 1%, 3%, 5%, and 10% weight of the total composite. FTIR analysis showed intercalation with Hexadecyl Ammonium Bromide (HDTMABr) surfactant was successfully carried out, indicated by new absorption bands at 2636 cm{sup −1} and 2569 cm{sup −1}. XRD diffractogram shows the increase in basal spasing on the modification of bentonite from 15.7 Å to 19.7 Å after modification. Fabrication of nanocomposite film was carried out using acetone as solvent and through solvent casting method. Nanocomposite application in photodegradation test was carried out under direct sunlight irradiation, UV light, and without irradiation for six days. It is found that the greater the amount of TiO{sub 2} in the composites, the more weight loss occured, due to photodegredation. Percent weight loss in the UV light irradiation are 1.11%, 2.15%, 2.73%, 3.18%, and 3.96%, while under direct sunlight irradiation, the weight loss was 1.03%, 3.03%, 3.88%, 4.53%, and 5.57%. Modification of nanocomposite with the addition of photocatalytic TiO{sub 2} has shown to give the nanocomposite the ability of self-photodegradation.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Dynamics of hydride anion and acetyloxyl radical production by electron attachment to acetic acid

Here, we investigate the dynamics and site-selectivity in the dissociation of transient anions formed upon attachment of low energy electrons to acetic acid by anion fragment momentum imaging experiments. The resonances at 6.7 and 7.7 eV are confirmed to dissociate exclusively by the O–H bond, while a third resonance at 9.1 eV dissociates primarily by both C–H break and O–H break. A fourth resonance near 10 eV is found to dissociate by O–H break. For each resonance, the measured kinetic energy release indicates two-body dissociation produces a neutral radical in the ground electronic state, for all four resonances. The measured angular distributions are consistent with all four resonances having A' symmetry.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Monofluorinated acetal electrolyte for high-performance lithium metal batteries

High degree of fluorination for ether electrolytes has resulted in improved cycling stability of lithium metal batteries due to stable solid electrolyte interphase (SEI) formation and good oxidative stability. However, the sluggish ion transport and environmental concerns of high fluorination degree drive the need to develop less fluorinated structures. Here, we depart from the traditional ether backbone and introduce bis(2-fluoroethoxy)methane (F2DEM), featuring monofluorination of the acetal backbone. High coulombic efficiency and stable long-term cycling in Li||Cu half cells can be achieved with F2DEM even under fast Li metal plating conditions. The performance of F2DEM is further compared with diethoxymethane (DEM) and 2-[2-(2,2-difluoroethoxy)ethoxy]-1,1,1-trifluoroethane (F5DEE). A significantly lower overpotential is observed with F2DEM, which improves energy efficiency and enables its application in high-rate conditions. Comparative studies of F2DEM with DEM and F5DEE in anode-free lithium iron phosphate (LiFePO4) LFP pouch cells and high-loading LFP coin cells further show improved capacity retention of F2DEM electrolyte, demonstrating its practical applicability. More importantly, we also extensively investigate the underlying mechanism for the superior performance of F2DEM through various techniques, including X-ray photoelectron spectroscopy, scanning electron microscopy, cryogenic electron microscopy, focused ion beam, electrochemical impedance spectroscopy, and titration gas chromatography. Overall, F2DEM facilitates improved Li deposition morphology with reduced amount of dead Li. This enables F2DEM to show superior performance, especially under higher charging and slower discharging rate conditions.

25 ENERGY STORAGE↗

Resonance Excitation of Photoluminescence in Crystalline Uranyl Acetate Dihydrate

A method for rapid identification of uranyl compounds based on resonance fiber-optic photoluminescence (PL) excitation by ultraviolet-laser or LED radiation is proposed. This method was used to measure the PL spectra of an extremely small volume (10{sup –9} cm{sup 3}) of crystalline uranyl acetate dehydrate UO{sub 2}(CH{sub 3}COO){sub 2} ∙ 2H{sub 2}O with an exposure of 10{sup –3} s. Semiconductor LEDs with wavelengths of 369, 385, 410, and 466 nm and a repetitively pulsed nitrogen laser with a lasing wavelength of 337 nm served as sources of excitation radiation. The operating range of a small-sized minispectrometer used in these experiments was 200–1000 nm.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

N-[4-(3-Methyl-3-phenyl-cyclobutyl)-thiazol-2-yl]-N′-pyridin-2-ylmethylene-chloro-acetic acid hydrazide: Synthesis and configurational assignment based on X-ray, {sup 1}H, and {sup 13}C NMR and theoretical calculations

In this study, quantum chemical calculations based on the density functional theory have been carried out to examine the effects of N-[4-(3-methyl-3-phenyl-cyclobutyl)-thiazol-2-yl]-N′-pyridin-2-ylmethylene- chloro-acetic acid hydrazide. The calculated values are compared with the experimental data available for these molecules as a mean of validation of our proposed chemistry model. Aided by normal coordinate analysis and potential energy distributions, a confident vibrational assignment of all fundamentals is proposed herein. Additional support is given by {sup 1}H and {sup 13}C NMR spectra recorded with the sample dissolved in CDCl{sub 3} and by predicted chemical shifts at the B3LYP/6-31G(d)/6-311G+(d) levels obtained using the gauge-invariant atomic orbital method. The calculated HOMO and LUMO energies also confirm that the charge transfer occurs within the molecule. Thiazole-based compounds are potential storehouse for exploiting CH···O and CH···N hydrogen bonding interactions for molecular self-assembly.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Synthesis, Crystal Structure, Electrochemical Properties, and Biological Activity of 2-((1H-Benzimidazol-2-yl)methylamino)acetic Acid

A water soluble compound, (2-((1H-benzimidazol-2-yl)methylamino)acetic acid, BIGH, has been synthesized and structurally characterized by elemental analysis, IR and UV spectroscopies, {sup 1}H-NMR, thermogravimetric and differential thermal analyses, and single crystal and powder X-ray diffraction. BIGH can act as a flexible planar ligand with three potential coordination sites. It crystallizes in a monoclinic system with the sp. gr. P2{sub 1}/c with the unit cell parameters, a = 9.3764(7) Å, b = 11.5031(8) Å, c = 10.0543(6) Å, and Z = 4. The crystal structure was stabilized through inter-molecular hydrogen bonds. The anti-microbial activity of the compound has been studied against Escherichia coli, Bacillus subtilis, Pseudomonas aeruginosa, and Staphylococcus aureus, which showed a good activity against Bacillus subtilis. Cyclic voltammogram of the compound shows that it is a redox-active molecule.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Partial wet oxidation of dairy manure as a pretreatment process to produce acetic acid ‘a Source Growth of Methanogens’

Wet oxidation can be an effective process for the pretreatment of complex biomass such as lignocellulose. However, studies on the use of wet oxidation for treating solid waste such as dairy manure are limited. The use of partial wet oxidation to convert dairy manure into low molecular weight carboxylic acids as final products were investigated. This work focuses on the performance of the sub-critical wet oxidation treatment of dairy cattle manure as a conversion/pretreatment process to release matter from the lignocellulosic fraction rather than a destructive process. The operating conditions were controlled at the short residence time and optimal temperature in the presence of oxygen under a pressure of 120 psi. The thermal hydrolysis under wet oxidation significantly affected conversion manure slurry into organic acids. The concentration of acetic acid reached 1778 mg L –1 , achieved at 190°C (60 minutes reaction time) as the reaction temperature increased within the range of 150°C–200°C, total organic carbon was reduced and monomers in the process liquids decreased. On the other hand, soluble COD in process liquids increased with an increment in reaction temperature. The results provide insights into technical options to pretreat dairy manure to improve biochemical conversion yield.

09 BIOMASS FUELS↗

A novel fermentation strategy for removing the key inhibitor acetic acid and efficiently utilizing the mixed sugars from lignocellulosic hydrolysates

As part of preliminary research efforts, we have completed several experiments which demonstrate 'proof of concept.' These experiments addressed the following three questions: (1) Can a synthetic mixed sugar solution of glucose and xylose be efficiently consumed using the multi-organism approach? (2) Can this approach be used to accumulate a model product? (3) Can this approach be applied to the removal of an inhibitor, acetate, selectively from mixtures of xylose and glucose? To answer the question of whether this multi-organism approach can effectively consume synthetic mixed sugar solutions, we first tested substrate-selective uptake using two strains, one unable to consume glucose and one unable to consume xylose. The xylose-selective strain ALS998 has mutations in the three genes involved in glucose uptake, rendering it unable to consume glucose: ptsG codes for the Enzyme IICB{sup Glc} of the phosphotransferase system (PTS) for carbohydrate transport (Postma et al., 1993), manZ codes for the IID{sup Man} domain of the mannose PTS permease (Huber, 1996), glk codes for glucokinase (Curtis and Epstein 1975) We also constructed strain ALS1008 which has a knockout in the xylA gene encoding for xylose isomerase, rendering ALS1008 unable to consume xylose. Two batch experiments and one continuous bioprocess were completed. In the first experiment, each strain was grown separately in a defined medium of 8 g/L xylose and 15 g/L glucose which represented xylose and glucose concentrations that can be generated by actual biomass. In the second experiment, the two strains were grown together in batch in the same defined, mixed-sugar medium. In a third experiment, we grew the strains continuously in a 'chemostat', except that we shifted the concentrations of glucose and xylose periodically to observe how the system would respond. (For example, we shifted the glucose concentration suddenly from 15 g/L to 30 g/L in the feed).

09 BIOMASS FUELS↗

Restoration Insights Gained from a Field Deployment of Dithionite and Acetate at a Uranium In Situ Recovery Mine

Mining uranium by in situ recovery (ISR) typically involves injecting an oxidant and a complexing agent to mobilize and extract uranium in a saturated ore zone. This strategy involves less infrastructure and invasive techniques than traditional mining, but ISR often results in persistently elevated concentrations of U and other contaminants of concern in groundwater after mining. These concentrations may remain elevated for an extended period without remediation. Here, we describe a field experiment at an ISR facility in which both a chemical reductant (sodium dithionite) and a biostimulant (sodium acetate) were sequentially introduced into a previously mined ore zone in an attempt to establish reducing geochemical conditions that, in principle, should decrease and stabilize aqueous U concentrations. While several lines of evidence indicated that reducing conditions were established, U concentrations did not decrease, and in fact increased after the amendment deployments. We discuss likely reasons for this behavior, and we also discuss how the results provide insights into improvements that could be made to the restoration process to benefit from the seemingly detrimental behavior.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Mercury Methylation and Soil Organic Matter Degradation in Incubations with Added Acetate, Isotope-Labeled Mercury, and Selective Microbial Inhibitors, Teller and Council Sites, Seward Peninsula, 2018-2019

This dataset provides the results of laboratory soil microcosm incubation experiments conducted under anaerobic conditions with added acetate, isotope-labeled mercury, and selective microbial inhibitors (2-bromoethanesulfonate and sodium molybdate). The microcosms contained soil collected in August 2018 from the NGEE Arctic Teller Road Site at mile marker 27 (TL_MM27) near Intensive Site 9 (TL_IS_9) and from the Council Road Site (CN_MM71). Incubations were conducted at 8°C for 180 days (Teller incubations) or 60 days (Council incubations). The microcosm headspace was sampled at designated intervals for greenhouse gas concentrations, then destructively harvested and extracted using ultrapure water and 0.1 M KCl for analysis of the porewater geochemistry. This dataset contains one pdf, two csv data files, and one zipped file with raw data.The Next-Generation Ecosystem Experiments: Arctic (NGEE Arctic), was a research effort to reduce uncertainty in Earth System Models by developing a predictive understanding of carbon-rich Arctic ecosystems and feedbacks to climate. NGEE Arctic was supported by the Department of Energy's Office of Biological and Environmental Research.The NGEE Arctic project had two field research sites: 1) located within the Arctic polygonal tundra coastal region on the Barrow Environmental Observatory (BEO) and the North Slope near Utqiagvik (Barrow), Alaska and 2) multiple areas on the discontinuous permafrost region of the Seward Peninsula north of Nome, Alaska.Through observations, experiments, and synthesis with existing datasets, NGEE Arctic provided an enhanced knowledge base for multi-scale modeling and contributed to improved process representation at global pan-Arctic scales within the Department of Energy's Earth system Model (the Energy Exascale Earth System Model, or E3SM), and specifically within the E3SM Land Model component (ELM).

54 ENVIRONMENTAL SCIENCES↗