SEARCH · Engineering Papers

Results for “waveform analysis”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 271 records · Page 15

All sources NASA NTRS DOE OSTI

NASA NTRS1981

Rotor wake characteristics relevant to rotor-stator interaction noise generation

Mean and turbulence wake properties at three axial locations behind the rotor of an aerodynamically loaded 1.2 pressure ratio fan were measured using a stationary cross film anemometer in an anechoic wind tunnel. Wake characteristics at four radial immersions across the duct at four different fan speeds were determined utilizing a signal enhancement technique. The shapes of the waveforms of the mean rotor relative and mean upwash velocities were shown to change significantly across the span of the blades. In addition, an increase in fan rotational speed caused an increase in the maximum wake turbulence intensity levels near the hub and tip. Spectral analysis was used to describe the complex nature of the rotor wake.

Shaw, L. M.↗

NASA NTRS2024

Adiabatic Gravitational Waveform Model for Compact Objects Undergoing Quasi-Circular Inspirals Into Rotating Massive Black Holes

We present bhpwave: a new python-based, open-source tool for generating the gravitational waveforms of stellar-mass compact objects undergoing quasicircular inspirals into rotating massive black holes. These binaries, known as extreme-mass-ratio inspirals (EMRIs), are exciting mHz gravitational wave sources for future space-based detectors such as the Laser Interferometer Space Antenna (LISA). Relativistic models of EMRI gravitational wave signals are necessary to unlock the full scientific potential of mHz detectors, yet few open-source EMRI waveform models exist. Thus we built bhpwave, which uses the adiabatic approximation from black hole perturbation theory to rapidly construct gravitational waveforms based on the leading-order inspiral dynamics of the binary. In this work, we present the theoretical and numerical foundations underpinning bhpwave. We also demonstrate how bhpwave can be used to assess the impact of EMRI modeling errors on LISA gravitational wave data analysis. In particular, we find that for retrograde orbits and slowly spinning black holes we can mismodel the gravitational wave phasing by as much as ∼10 radians without significantly biasing EMRI parameter estimation.

Zachary Nasipak↗

NASA NTRS2004

Reconfigurable Transceiver and Software-Defined Radio Architecture and Technology Evaluated for NASA Space Communications

The NASA Glenn Research Center is investigating the development and suitability of a software-based open-architecture for space-based reconfigurable transceivers (RTs) and software-defined radios (SDRs). The main objectives of this project are to enable advanced operations and reduce mission costs. SDRs are becoming more common because of the capabilities of reconfigurable digital signal processing technologies such as field programmable gate arrays and digital signal processors, which place radio functions in firmware and software that were traditionally performed with analog hardware components. Features of interest of this communications architecture include nonproprietary open standards and application programming interfaces to enable software reuse and portability, independent hardware and software development, and hardware and software functional separation. The goals for RT and SDR technologies for NASA space missions include prelaunch and on-orbit frequency and waveform reconfigurability and programmability, high data rate capability, and overall communications and processing flexibility. These operational advances over current state-of-art transceivers will be provided to reduce the power, mass, and cost of RTs and SDRs for space communications. The open architecture for NASA communications will support existing (legacy) communications needs and capabilities while providing a path to more capable, advanced waveform development and mission concepts (e.g., ad hoc constellations with self-healing networks and high-rate science data return). A study was completed to assess the state of the art in RT architectures, implementations, and technologies. In-house researchers conducted literature searches and analysis, interviewed Government and industry contacts, and solicited information and white papers from industry on space-qualifiable RTs and SDRs and their associated technologies for space-based NASA applications. The white papers were evaluated, compiled, and used to assess RT and SDR system architectures and core technology elements to determine an appropriate investment strategy to advance these technologies to meet future mission needs. The use of these radios in the space environment represents a challenge because of the space radiation suitability of the components, which drastically reduces the processing capability. The radios available for space are considered to be RTs (as opposed to SDRs), which are digitally programmable radios with selectable changes from an architecture combining analog and digital components. The limited flexibility of this design contrasts against the desire to have a power-efficient solution and open architecture.

Reinhart, Richard C.↗

NASA NTRS1978

Optical signal processing

The article discusses several optical configurations used for signal processing. Electronic-to-optical transducers are outlined, noting fixed window transducers and moving window acousto-optic transducers. Folded spectrum techniques are considered, with reference to wideband RF signal analysis, fetal electroencephalogram analysis, engine vibration analysis, signal buried in noise, and spatial filtering. Various methods for radar signal processing are described, such as phased-array antennas, the optical processing of phased-array data, pulsed Doppler and FM radar systems, a multichannel one-dimensional optical correlator, correlations with long coded waveforms, and Doppler signal processing. Means for noncoherent optical signal processing are noted, including an optical correlator for speech recognition and a noncoherent optical correlator.

Casasent, D.↗

NASA NTRS1997

PSIDD (2): A Prototype Post-Scan Interactive Data Display System for Detailed Analysis of Ultrasonic Scans

This article presents the description of PSIDD(2), a post-scan interactive data display system for ultrasonic contact scan and single measurement analysis. PSIDD(2) was developed in conjunction with ASTM standards for ultrasonic velocity and attenuation coefficient contact measurements. This system has been upgraded from its original version PSIDD(1) and improvements are described in this article. PSIDD(2) implements a comparison mode where the display of time domain waveforms and ultrasonic properties versus frequency can be shown for up to five scan points on one plot. This allows the rapid contrasting of sample areas exhibiting different ultrasonic properties as initially indicated by the ultrasonic contact scan image. This improvement plus additional features to be described in the article greatly facilitate material microstructural appraisal.

Cao, Wei↗

NASA NTRS2004

LASTRAC.3d: Transition Prediction in 3D Boundary Layers

Langley Stability and Transition Analysis Code (LASTRAC) is a general-purpose, physics-based transition prediction code released by NASA for laminar flow control studies and transition research. This paper describes the LASTRAC extension to general three-dimensional (3D) boundary layers such as finite swept wings, cones, or bodies at an angle of attack. The stability problem is formulated by using a body-fitted nonorthogonal curvilinear coordinate system constructed on the body surface. The nonorthogonal coordinate system offers a variety of marching paths and spanwise waveforms. In the extreme case of an infinite swept wing boundary layer, marching with a nonorthogonal coordinate produces identical solutions to those obtained with an orthogonal coordinate system using the earlier release of LASTRAC. Several methods to formulate the 3D parabolized stability equations (PSE) are discussed. A surface-marching procedure akin to that for 3D boundary layer equations may be used to solve the 3D parabolized disturbance equations. On the other hand, the local line-marching PSE method, formulated as an easy extension from its 2D counterpart and capable of handling the spanwise mean flow and disturbance variation, offers an alternative. A linear stability theory or parabolized stability equations based N-factor analysis carried out along the streamline direction with a fixed wavelength and downstream-varying spanwise direction constitutes an efficient engineering approach to study instability wave evolution in a 3D boundary layer. The surface-marching PSE method enables a consistent treatment of the disturbance evolution along both streamwise and spanwise directions but requires more stringent initial conditions. Both PSE methods and the traditional LST approach are implemented in the LASTRAC.3d code. Several test cases for tapered or finite swept wings and cones at an angle of attack are discussed.

Chang, Chau-Lyan↗

NASA NTRS2022

Kink Oscillation of a Flux Rope During a Failed Solar Eruption

We report a decaying kink oscillation of a ﬂux rope during a conﬁned eruptive ﬂare, observed oﬀ the solar limb by SDO/AIA, that lacked a detectable white-light coronal mass ejection. The erupting ﬂux rope underwent kinking, rotation, and apparent leg–leg interaction during the event. The oscillations were observed simultaneously in multiple AIA channels at 304, 171, and 193 Å, indicating that multithermal plasma was entrained in the rope. After reaching the overlying loops in the active region, the ﬂux rope exhibited large-amplitude, decaying kink oscillations with an apparent initial amplitude of 30 Mm, period of about 16 min, and decay time of about 17 min. We interpret these oscillations as a fundamental standing kink mode of the ﬂux rope. The oscillation polarization has a clear vertical component, while the departure of the detected waveform from a sinusoidal signal suggests that the oscillation could be circularly or elliptically polarized. The estimated kink speed is 1080 km s−1, corresponding to an Alfv'en speed of about 760 km s−1. This speed, together with the estimated electron density in the rope from our DEM analysis, ne ≈ (1.5–2.0) ×109 cm−3, yields a magnetic ﬁeld strength of about 15 G. To the best of our knowledge, decaying kink oscillations of a ﬂux rope with non-horizontal polarization during a conﬁned eruptive ﬂare have not been reported before. These oscillations provide unique opportunities for indirect measurements of the magnetic-ﬁeld strength in low-coronal ﬂux ropes during failed eruptions.

Pankaj Kumar↗

NASA NTRS1975

Propagation of transients in a random medium

The propagation of transient scalar waves in a three-dimensional random medium is considered. The analysis is based on the smoothing method. An integro-differential equation for the coherent (or average) wave is derived and solved for the case of a statistically homogeneous and isotropic medium and a delta-function source. This yields the coherent Green's function of the medium. It is found that the waveform of the coherent wave depends generally on the distance from the source measured in terms of a certain dimensionless parameter. Based on the magnitude of this parameter, three propagation zones, called the near zone, the far zone, and the intermediate zone, are defined.

Wenzel, A. R.↗

NASA NTRS1992

Design and analysis of low boom concepts at Langley Research Center

The objective of the sonic boom research in the current High Speed Research Program is to ultimately make possible overland supersonic flight by a high speed civil transport. To accomplish this objective, it is felt that results in four areas must demonstrate that such a vehicle would be acceptable by the general public, by the airframers, and by the airlines. It should be demonstrated: (1) that some waveform shape has the possibility of being acceptable to the general public; (2) that the atmosphere would not totally destroy such a waveform during propagation; (3) that a viable airplane could be built which produces such a waveform; and (4) that any performance penalty suffered by a low boom aircraft would be counteracted by the economic benefit of overland supersonic flight. The work being done at LaRC is in support of the third element listed above--the area of configuration design. The initial part of the paper will give a review of the theory being used for configuration designs and discuss two theory validation models which were built and tested within the past two years. Discussion of the wind tunnel and theoretical results (linear theory and higher order methods) and their implications for future designs will be included.

Darden, Christine M.↗

NASA NTRS2003

Alternate Communications Spectrum Study (ACSS) for Aviation Data Links (ADL)

The aim of the work was to identify the key factors involved in the use of alternate spectrum in various bands for a future integrated CNS data link. The study focused on systems and spectral bands that can deliver VDL-or-higher data rates in a two-way communication setting (including air-ground, ground-air, and air-air modes of operation), with multiple platforms (aircraft) operating in the same local environment. We begin with a review of the initial task list, and the final task list. The final task list contained a focus upon spectral availability and related systems that could be affected by the deployment of a new aviation data link (ADL) system. Most of this addresses the lower few layers of the communications protocol stack. A brief review of current related efforts in the aeronautical community is then provided, in which we describe several systems and programs of interest. Participation in some of these efforts is recommended. We also delineate several of the advantages and disadvantages of these system/efforts, in view of anticipated requirements of a new ADL. Desired attributes of a new ADL system are then discussed, and a connection with existing systems is made. The need to consider a wider set of alternative systems and technologies is described, and the beneficial aspects of a particular transmission technique- spread spectrum-are discussed. We then discuss in more detail several potential spectral regions, in terms of propagation conditions, available technology, spectrum availability, and waveform selection. Some comments on the need for standardization are also provided. We note that none of the existing systems described will likely meet the full range of desired features of a new ADL, but that several systems and spectral regions offer promise in terms of one or more characteristics. A system design and analysis approach is then provided. In this, we again focus on the lower few layers of the protocol stack, and aim to capture the main features and parameters that must be selected in the design. Two appendices show example versions and initial results of the first few technical steps in the design approach. Some conclusions are then drawn, and in the final section, recommendations are provided, the most important of which are repeated here: 1. Continue the effort begun here. As detailed in this report, we have only uncovered much of the work that needs to be done in order to provide the foundation for a flexible, high- performance, robust ADL. 2. Seize the opportunity to begin testing in the MLS band. The wide bandwidths and low level of usage of this band make it an ideal one for proof-of-concept type testing. Other (non- aeronautical) organizations are likely to make claims on the band if it is not being used. The primary conclusion is that there is a real and pressing need for a new aviation data link. vi

Matolak, David W.↗

NASA NTRSDate not supplied

Third Sonic Boom Prediction Workshop Cases: Analysis Using the NASA PCBoom

This paper presents simulation results and analyses using the test cases provided for the Third Sonic Boom Prediction Workshop of the American Institute of Aeronautics and Astronautics. The simulation focuses on propagation to the ground of sonic boom generated by supersonic aircraft accounting for atmospheric effects. The simulation results use the NASA PCBoom propagation code that features the latest updates on the ray tube area and kinematic ray tracing algorithms to better predict waveforms and sonic boom carpet edges, respectively.

low boom↗

NASA NTRS1992

Computation of load performance and other parameters of extra high speed modified Lundell alternators from 3D-FE magnetic field solutions

The combined magnetic vector potential - magnetic scalar potential method of computation of 3D magnetic fields by finite elements, introduced in a companion paper, in combination with state modeling in the abc-frame of reference, are used for global 3D magnetic field analysis and machine performance computation under rated load and overload condition in an example 14.3 kVA modified Lundell alternator. The results vividly demonstrate the 3D nature of the magnetic field in such machines, and show how this model can be used as an excellent tool for computation of flux density distributions, armature current and voltage waveform profiles and harmonic contents, as well as computation of torque profiles and ripples. Use of the model in gaining insight into locations of regions in the magnetic circuit with heavy degrees of saturation is demonstrated. Experimental results which correlate well with the simulations of the load case are given.

Wang, R.↗

NASA NTRS1996

Advanced AE Techniques in Composite Materials Research

Advanced, waveform based acoustic emission (AE) techniques have been successfully used to evaluate damage mechanisms in laboratory testing of composite coupons. An example is presented in which the initiation of transverse matrix cracking was monitored. In these tests, broad band, high fidelity acoustic sensors were used to detect signals which were then digitized and stored for analysis. Analysis techniques were based on plate mode wave propagation characteristics. This approach, more recently referred to as Modal AE, provides an enhanced capability to discriminate and eliminate noise signals from those generated by damage mechanisms. This technique also allows much more precise source location than conventional, threshold crossing arrival time determination techniques. To apply Modal AE concepts to the interpretation of AE on larger composite specimens or structures, the effects of modal wave propagation over larger distances and through structural complexities must be well characterized and understood. To demonstrate these effects, measurements of the far field, peak amplitude attenuation of the extensional and flexural plate mode components of broad band simulated AE signals in large composite panels are discussed. These measurements demonstrated that the flexural mode attenuation is dominated by dispersion effects. Thus, it is significantly affected by the thickness of the composite plate. Furthermore, the flexural mode attenuation can be significantly larger than that of the extensional mode even though its peak amplitude consists of much lower frequency components.

Prosser, William H.↗

NASA NTRS2017

Computational Modeling of Meteor-Generated Ground Pressure Signatures

We present a thorough validation of a computational approach to predict infrasonic signatures of centimeter-sized meteoroids. We assume that the energy deposition along the meteor trail is dominated by atmospheric drag and simulate the steady, inviscid flow of air in thermochemical equilibrium to compute the meteoroid's near-body pressure signature. This signature is then propagated through a stratified and windy atmosphere to the ground using a methodology adapted from aircraft sonic-boom analysis. An assessment of the numerical accuracy of the near field and the far field solver is presented. The results show that when the source of the signature is the cylindrical Mach-cone, the simulations closely match the observations. The prediction of the shock rise-time, the zero-peak amplitude of the waveform, and the duration of the positive pressure phase are consistently within 10% of the measurements. Uncertainty in the shape of the meteoroid results in a poorer prediction of the trailing part of the waveform. Overall, our results independently verify energy deposition estimates deduced from optical observations.

Computational↗

NASA NTRSDate not supplied

Acoustic Characterization of the NASA Langley 14- by 22-Foot Subsonic Tunnel Using Single-Microphone Analysis Techniques

An experimental campaign was conducted to assess recent acoustic modifications to the NASA Langley Research Center 14- by 22-Foot Subsonic Tunnel. This effort was undertaken in preparation for future rotorcraft, Advanced Air Mobility, and airframe noise acoustic tests. The tunnel is a closed circuit and typically operates in an open-jet configuration for acoustic studies. A vertical linear array of microphones and a phased array were placed on traverses outside of the core flow. Pole-mounted acoustic sources with known waveforms were used to identify reflective surfaces under static conditions with no tunnel flow. A similar process was replicated with more compact sources in an aerodynamic fairing for flow speeds up to Mach 0.16. This enabled investigation of the test section core flow and bounding shear layer impacts on the acoustic measurements. Periodic averaging was employed and was shown to be capable of isolating periodic acoustic signals even for poor signal-to-noise ratio conditions. Benefits and limitations of single-microphone processing methods are identified. A companion paper utilizes a phased array in an effort to address the identified limitations to more traditional single-microphone data collection.

Acoustic Characterization↗

NASA NTRSDate not supplied

Acoustic Characterization of the NASA Langley 14- by 22-Foot Subsonic Tunnel Using Single-Microphone Analysis Techniques

Acoustic Characterization↗

NASA NTRS2015

A Summary of the Lateral Cutoff Analysis and Results from Nasa's Farfield Investigation of No-Boom Thresholds

In support of the ongoing effort by the National Aeronautics and Space Administration (NASA) to bring supersonic commercial travel to the public, NASA, in partnership with other industry organizations, conducted a flight research experiment to analyze acoustic propagation at the lateral edge of the sonic boom carpet. The name of the effort was the Farfield Investigation of No-boom Thresholds (FaINT). The research from FaINT determined an appropriate metric for sonic boom waveforms in the transition and shadow zones called Perceived Sound Exposure Level, established a value of 65 dB as a limit for the acoustic lateral extent of a sonic boom's noise region, analyzed change in sonic boom levels near lateral cutoff, and compared between real sonic boom measurements and numerical predictions.

acoustics↗

NASA NTRS2002

Single-Trial Analysis of V1 Responses Suggests Two Transmission States

Sensory processing in the visual, auditory, and somatosensory systems is often studied by recording electrical activity in response to a stimulus of interest. Typically, multiple trial responses to the stimulus are averaged to isolate the stereotypic response from noise. However, averaging ignores dynamic variability in the neuronal response, which is potentially critical to understanding stimulus-processing schemes. Thus, we developed the multiple component, Event-Related Potential (mcERP) model. This model asserts that multiple components, defined as stereotypic waveforms, comprise the stimulus-evoked response and that these components may vary in amplitude and latency from trial to trial. Application of this model to data recorded simultaneously from all six laminae of V1 in an awake, behaving monkey performing a visual discrimination yielded three components. The first component localized to granular V1, the second was located in supragranular V1, and the final component displayed a multi-laminar distribution. These modeling results, which take into account single-trial response dynamics, illustrated that the initial activation of VI occurs in the granular layer followed by activation in the supragranular layers. This finding is expected because the average response in those layers demonstrates the same progression and because anatomical evidence suggests that the feedforward input in V1 enters the granular layer and progresses to supragranular layers. In addition to these findings, the granular component of the model displayed several interesting trial-to-trial characteristics including (1) a bimodal latency distribution, (2) a latency-related variation in response amplitude, (3) a latency correlation with the supragranular component, and (4) an amplitude and latency association with the multi-laminar component. Direct analyses of the single-trial data were consistent with these model predictions. These findings suggest that V1 has at least 2 transmission states, which may be modulated by various effects such as attention, dynamics in local EEG rhythm, or variation in sensory inputs.

Shah, A. S.↗