Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “volatilization”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 271 records · Page 15

Secondary Volcanically-Induced Lunar Atmosphere and Lunar Volatiles: 3-D Modeling and Analysis

The fact that the Moon could have a transient secondary atmosphere due to volcanic outgassing has been known for some time, though typically such an atmosphere was believed to be extremely thin (~10-8 bar) [1]. But recent research by Needham and Kring (NK) [2] suggests that during the peak of volcanic activity ~3.5 Ga such a volcanically-outgassed atmosphere could reach ~10-2 bar of surface pressure. In similar research Wilson et al. [3] proposed a more conservative estimate, arguing that the thickness of such an atmosphere would depend on the intervals between major eruptions and may not exceed microbar densities. In either case a collisional atmosphere could be present, which would control transport of outgassed volatiles (such as H2O) and their deposition in polar regions, where they could be preserved until modern day frozen in permanently shadowed regions (PSR) or buried beneath the regolith. Here we study such a hypothetical atmosphere to investigate its stability, meteorological properties and the effect on transport of volatiles. We use the ROCKE-3D planetary 3-D General Circulation Model (GCM)[4]. The insolation and orbital parameters were set to conditions 3.5 Ga. The atmospheric composition, based on the list of outgassed species presented by NK in combination with our estimates for atmospheric escape, condensation and the results from our 1-D chemistry model, was chosen to be either CO-dominated or CO2-dominated (depending on atmospheric temperature). In this study we restricted ourselves to relatively "thick" lunar atmospheres of 1-10 mb, though we believe that our results will scale to thinner atmospheres as well. We present the results for ground and atmospheric temperature for modeled atmospheres over a wide parameter space. In particular we consider different atmospheric compositions (CO or CO2 dominated), a set of atmospheric pressures from 1 mb to 10 mb and a set of obliquities from 0o to 40o. We also present an experiment of a single major eruption [5] and show that in just 3 years ~80% of the outgassed water is deposited in polar regions. This demonstrates the efficiency of such an atmosphere in delivering volatiles. We argue that a secondary lunar atmosphere could play a significant role in forming volatile deposits currently observed in the polar regions of the Moon.

Lunar atmospheres↗

The Effect of Europa and Enceladus Analog Seawater Composition on Isotopic Measurements of Volatile CO2

Science goals for icy ocean worlds missions include characterizing the chemical compositionof the surface and interior using remote sensing and in situ techniques. The next class of flightmass spectrometers for these missions will obtain compositional identifications and isotope ratiomeasurements of volatiles evolved from the ice surface (exosphere) and plumes. These massspectra will be combined with data from other flight instruments to infer the composition of theinterior from volatiles. To ensure accurate interpretation of these measurements, it is critical toverify whether the fundamental assumption that volatiles observed in icy ocean world exospheresor plumes will be a direct reflection of the sub-ice ocean. The present study evaluates whether isotopologues from an initial CO2 gas fractionate by interacting with seawater (brine) of varyingsalt composition and concentration. δ13CCO2 are affected by the pH of the brine and subsequentspeciation of {CO2}, where {CO2} represents the combination of CO2, H2CO3, HCO3-, and CO32-.{CO2} for low pH brines hypothesized for Europa will preferentially speciate as CO2. Analyzedδ13CCO2 for low pH brines are within error of the original δ13CCO2, demonstrating that volatile CO2in a low pH system will be a direct reflection of the original CO2. However, Europa’s radiativeenvironment and rapid depressurization due to plume ejection may impose fractionation effects.In contrast, high pH systems relevant to Enceladus or a more alkaline Europa are expected toform all carbonate species, while favoring speciation as HCO3-. High pH brines in theseexperiments include both an original CO2 gas and an isotopically distinct HCO3- (from NaHCO3salt). These alkaline experiments demonstrate that δ13CCO2 values are highly variable, and dependon the concentration of the dominant carbonate species, (Na)HCO3-. Mass balance estimatesindicate that measured δ13CCO2 is a thermodynamically predictable mixture of both carbonsources, suggesting that measurements of δ13C at Enceladus would directly reflect of the sourcesof CO2 and carbonate buffering in the ocean. δ18O measurements for CO2 interacting with KCland MgCl2 follow established models for δ18O-ionic strength. CO2 interacting with MgSO4,Na2SO4, and NaCl demonstrate an offset from established δ18O-ionic strength models dependingon the concentration of initial CO2. These results suggest that current predictive models for δ18Oin brines need to be resolved for changing concentrations of CO2

Ocean Worlds↗

The abundances of F, Cl, and H2O in eucrites: Implications for the origin of volatile depletion in the asteroid 4 Vesta

We conducted a petrologic study of apatite within eight unbrecciated, non-cumulate eucrites and two monomict, non-cumulate eucrites. These data were combined with previously published data to quantify the abundances of F, Cl, and H2O in the bulk silicate portion of asteroid 4 Vesta (BSV). Using a combination of apatite-based melt hygrometry/chlorometry and appropriately paired volatile/refractory element ratios, we determined that BSV has 3.0–7.2 ppm F, 0.39–1.8 ppm Cl, and 3.6–22 ppm H2O. The abundances of F and H2O are depleted in BSV relative to CI chondrites to a similar degree as F and H2O in the bulk silicate portion of the Moon. This degree of volatile depletion in BSV is similar to what has been determined previously for many moderately volatile elements in 4 Vesta (e.g., Na, K, Zn, Rb, Cs, and Pb). In contrast, Cl is depleted in 4 Vesta by a greater degree than what is recorded in samples from Earth or the Moon. Based on the Cl-isotopic compositions of eucrites and the bulk rock Cl/F ratios determined in this study, the eucrites likely formed through serial magmatism of a mantle with heterogeneous δ37Cl and Cl/F, not as extracts from a partially crystallized global magma ocean. Furthermore, the volatile depletion and Cl-isotopic heterogeneity recorded in eucrites is likely inherited, at least in part, from the precursor materials that accreted to form 4 Vesta and is unlikely to have resulted solely from degassing of a global magma ocean, magmatic degassing of eucrite melts, and/or volatile loss during thermal metamorphism. Although our results can be reconciled with the past presence of wide-scale melting on 4 Vesta (i.e., a partial magma ocean), any future models for eucrite petrogenesis involving a global magma ocean would need to account for the preservation of a heterogeneous eucrite source with respect to Cl/F ratios and Cl isotopes.

Francis M. Mccubbin↗

Overview of the Volatiles Investigating Polar Exploration Rover

The Volatiles Investigating Polar Exploration Rover (VIPER) is a lunar volatiles detection and measurement mission. VIPER will be launched to the Moon in late 2023 as a payload on the Commercial Lunar Payload Services(CLPS) flight provided by Astrobotic's Griffin lander. The VIPER rover is a solar powered, mobile robot de-signed to traverse up to 20 km during a mission lasting up to four lunar days. After landing in a south polar region, the VIPER rover will travel to investigate a range of Ice Stability Regions (ISRs) across scales from 100s of meters to kilometers and conduct surface and subsurface assessment of lunar water and other volatiles. VIPER includes a suite of rover-mounted instruments(three spectrometers and a drill), which the VIPER science mission team will use to characterize the nature of the volatiles and to create global lunar water resource maps.

planetary rover↗

Characterization of Lunar Polar Volatiles for Curation and ISRU - Executive Summary

The goal of this project is to support lunar exploration by simulating and characterizing ice and volatile-rich materials expected to be found at the lunar poles. These materials are highly sensitive to heating, which could significantly alter their composition and prevent scientific studies on lunar samples. During FY19, we obtained materials for and designed a simulated lunar environment, within which volatile-rich simulant could be made. We also refined the procedure for moderate-fidelity lunar simulants at cryogenic temperatures. In FY20, we completed our test setup, and we can now reach cryogenic temperatures and near-lunar pressures with active compositional monitoring of volatiles in the vapor phase. For FY21, we: 1) progressed towards developing sample storage temperature requirements for volatile-rich samples by completing storage testing, along with materials testing for Artemis geologic sampling, 2) obtained instrumentation for solid sample monitoring to characterize solid species, and 3) progressed towards water extraction testing for ISRU. Our test results will directly feed into Artemis science requirements, hardware designs for sample return, vehicle requirements (HLS, Gateway, Orion), and operations planning for lunar exploration activities.

Julie L Mitchell↗

Volatiles in melt inclusions from lunar mare basalts: Bridging the gap in the H 2 O/Ce ratio between melt Inclusions in lunar pyroclastic sample 74220 and other mare samples

The H2O concentration and H 2 O/Ce ratio in olivine-hosted melt inclusions are high in lunar pyroclastic sample 74220 (H 2 O up to 1410 ppmw; H 2 O/Ce up to 77) but lower (H2O 10 to 430 ppmw; H 2 O/Ce 0.3 to 9.4) in all other lunar samples studied before this work. The difference in H 2 O concentration and in H 2 O/Ce ratio is absent for other volatile elements (F, S, and Cl) in melt inclusions in 74220 and other lunar samples. Because H 2 O (or H) is a critical volatile component with significant ramifications on the origin and evolution of the Moon, it is important to understand what causes such a large gap in H 2 O/Ce ratio between 74220 and other lunar samples. Two explanations have been advanced. One is that volcanic product in sample 74220 has the highest cooling rate and thus best preserved H 2 O in melt inclusions compared to melt inclusions in other samples. The other explanation is that sample 74220 comes from a localized heterogeneity enriched in some volatiles. To distinguish these two possibilities, here we present new data from two rapidly cooled lunar samples with glassy melt inclusions: olivine-hosted melt inclusions (OHMIs) in 79135 regolith breccia (unknown cooling rate but with glassy MIs similar in texture with those in 74220), and pyroxene-hosted melt inclusions (PHMIs) in 15597 pigeonite basalts (known high cooling rate, second only to 74220 and 15421). In addition, we also investigated new OHMIs in sample 74220. If the gap is due to the difference in cooling rates, samples with cooling rates between those of 74220 and other studied lunar samples should have preserved intermediate H2O concentrations and H 2 O/Ce ratios. Our results show that melt inclusions in 79135 and 15597 contain high H 2 O concentrations (up to 969 ppmw in 79135 and up to 793 ppmw in 15597) and high H 2 O/Ce ratios (up to 21 in 79135 and up to 13 in 15997), bridging the big gap in H 2 O/Ce ratio among 74220 and other lunar samples. Combined with literature data, we confirm that H 2 O/Ce ratios of different lunar samples are positively correlated to the cooling rates and independent of the type of mare basalts. We hence reinforce the interpretation that the lunar sample with the highest cooling rate best represents pre-eruptive volatiles in lunar basalts due to the least degassing. Based on Ce concentration in the primitive lunar mantle, we estimate that H 2 O concentration in the primitive lunar mantle (meaning bulk silicate Moon) is 121 ± 15 ppmw. Our new data also further constrain F/P, S/Dy and Cl/Ba ratios in lunar basalts and the lunar mantle. Estimated F, P, and S concentrations in the lunar primitive mantle are 4.4 ± 1.1 ppmw, 22 ± 8 ppmw, and 67 +67 −33 ppmw, respectively.

Xue Su↗

Reducing volatilization of heavy metals in phosphate-pretreated municipal solid waste incineration fly ash by forming pyromorphite-like minerals

This research investigated the feasibility of reducing volatilization of heavy metals (lead, zinc and cadmium) in municipal solid waste incineration (MSWI) fly ash by forming pyromorphite-like minerals via phosphate pre-treatment. To evaluate the evaporation characteristics of three heavy metals from phosphate-pretreated MSWI fly ash, volatilization tests have been performed by means of a dedicated apparatus in the 100-1000 deg. C range. The toxicity characteristic leaching procedure (TCLP) test and BCR sequential extraction procedure were applied to assess phosphate stabilization process. The results showed that the volatilization behavior in phosphate-pretreated MSWI fly ash could be reduced effectively. Pyromorphite-like minerals formed in phosphate-pretreated MSWI fly ash were mainly responsible for the volatilization reduction of heavy metals in MSWI fly ash at higher temperature, due to their chemical fixation and thermal stabilization for heavy metals. The stabilization effects were encouraging for the potential reuse of MSWI fly ash.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Volatile organic compound detection device

A volatile organic compound detection device includes a collector comprising: a collector material configured to collect volatile organic compounds given off from a patient's skin; a heater comprising a heating element, the heating element configured to emit a thermal pulse to desorb the volatile organic compounds from the collector material; and a flow channel configured to receive the volatile organic compounds desorbed by the heater; and a fastener configured to secure the collector to the patient's skin.

Arnold, Gary Stephen↗

Potential defect structure effects in the volatility separation of sub-picogram quantities of fission and activation products from an irradiated UO2 matrix

Here, the use of fluorination as a rapid separation technique for quantification of trace-mass, short-lived isotopes is illustrated. Single crystal 238 UO 2 was exposed to a 14 MeV neutron source to produce mixed fission and activation products. Selective removal of trace volatile fluorides from non-volatile ones produced two results of interest. A decrease in background produced better detection and quantification of select analytes across the gamma spectrum. Second, at the very low burnup condition described, the volatility behaviors of common isotopes were altered relative to their well-established behaviors in higher burnup metal and metal oxide fuels.

Fission and activation product separations↗

Volatility of sodium, potassium, and cesium perrhenates determined by thermogravimetry

Here, in this study, we investigated the volatility of sodium, potassium, and cesium perrhenates using thermogravimetry (TG) performed on single salts and their binary mixed salts. We performed simultaneous TG and differential scanning calorimetry under a ramp heating condition at 10°C/min up to 1200°C to characterize volatilization behavior as a function of temperature. We also performed isothermal TG over a temperature range of 700 to 975°C to estimate the vapor pressures of the alkali perrhenates based on a modified Langmuir equation that relates the rate of free evaporation from the open surface to vapor pressure. In this paper, we discuss the results of our study on the temperature of evaporation and temperature-dependent vapor pressure of sodium, potassium, and cesium perrhenates in relation to rhenium volatilization behavior observed during melting of simulated waste glass.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Comparing and contrasting In-Vial and full-scale systems for sparging volatile analytes

Here, in-vial sparging was demonstrated as an effective, practical alternative to a full-scale sparging system for supporting the analysis of volatile constituents. Using elemental mercury (Hg 0 ) and toluene as representative purgeable analytes, the mass removal for various sparge configurations was measured and a reduced order model was developed and validated. In the primary experiments, Hg 0 in the sparge gas was trapped on activated carbon or gold, thermally desorbed, and quantified using atomic absorption or atomic fluorescence spectroscopy. Toluene experiments using the same in-vial sparge apparatus and sparge parameters were performed to demonstrate the applicability of the reduced order model to a broad range of compounds. Toluene removal was tracked by measuring the remaining toluene in sparged aliquots using Ultraviolet-visible (UV–Vis) spectroscopy. For the sparging, flow rates varied from 25 to 75 mL/min for periods from 0 to 30 min. Sparge performance, mass removal as a function of time, and sparge gas volume were measured for both in-vial and full-scale systems. A model based on dimensionless Henry's Law coefficient, normalized sparge gas volume, and fractional extent of equilibrium matched the experimental data for both compounds and provides a practical tool for future applications. For the conditions tested in this study, the calibrated model indicated that the sparge gas in the in-vial system reached approximately 33% of its equilibrium value before exiting the water surface, while a full-scale system reached approximately 100%. The tests validated the quality, reproducibility, and predictability of sparging performance for both full scale and in-vial sparge systems. Related factors such as waste generation, worker risk, and labor were also assessed. Full scale sparge systems provide the advantage of lower detection levels due to larger sample volume, while the in-vial sparge systems provide advantages for most other factors; including automatability, reducing secondary wastes, lessening the need to clean and check the sparge apparatus, and lowering labor and costs. The data and associated reduced order model support continued development and deployment of in-vial sparge platforms as a practical option for analysis of purgeable analytes such as volatile organic compounds and volatile metals/organometallics.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Development of metallic nuclear material purification process via simultaneous chlorination and volatilization

Here, a purification process involving simultaneous chlorination and volatilization is reported using aluminum, iron, gallium, and uranium separation from cerium metal as the demonstration system. Anhydrous Cl 2 gas was reacted with the metal after it had been converted to small particles of hydride at temperatures ranging from 523 to 973 K. Each of the impurities should form chlorides with relatively high saturated vapor pressures. The objective of the process was to volatilize these chlorides after first achieving near-complete conversion of the metals to hydride and then chlorides. Complete conversion of hydrides to chlorides could not be achieved using relatively low-grade (99.5%) Cl 2 . High decontamination factors for all of the metal impurities required near complete conversion to chloride. It was concluded that oxygen contamination of the feed gas stream likely limits the conversion to chlorides by forming oxides instead, which then limits the volatilization of contaminants. Uranium was particularly challenging to remove in experiments suspected of having high oxygen contamination in the feed gas stream. After switching to ultra-high purity (99.999%) Cl 2 , complete conversion to chlorides within the measurement error was possible for the entire temperature range studied. Decontamination factors for aluminum, iron, gallium, and uranium were found to have average values of 1.9, 9.8, 14, and 5, respectively, at 973 K. While the process was most extensively studied using a once-through gas flow, recycling unreacted Cl 2 gas succeeded at minimizing waste while still maintaining complete conversion and similar decontamination factors.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Secondary Organic Aerosol from OH Oxidation of Acyclic Terpenes Is More Viscous and Less Volatile than That of Their Cyclic Analogs

Biogenic volatile organic compounds (BVOCs), a dominant source of secondary organic aerosol (SOA) globally, exhibit emission rates and composition that are plant species-specific and vary with environmental stressors. A common outcome of plant stress is increased emissions of acyclic terpenes. The paucity of information about acyclic terpene SOA chemistry contributes to uncertainties in predictions of SOA global loadings and impacts on Earth’s radiative budget, particularly in a changing climate where acyclic terpene emissions could become more prominent. This study compared properties of SOA derived from OH oxidation of acyclic and cyclic monoterpenes (ß-ocimene, a-pinene) and sesquiterpenes (ß-farnesene, ß-caryophyllene). Single particle mass spectrometry was used for assessing shape, density, and evaporation kinetics of size-selected SOA particles, and nanospray desorption electrospray ionization high-resolution mass spectrometry (nano-DESI-HRMS) was used to measure molecular composition of SOA. Acyclic terpene SOA exhibited higher viscosity and lower volatility compared to cyclic terpene SOA, and had a greater volume fraction remaining (VFR) after ~24 hours of evaporation - approximately 1.3-1.6 times higher VFR than that of cyclic terpene SOA. Additionally, HRMS analysis revealed greater chemical diversity and higher fractions of extremely low volatility compounds (56-62% ELVOC/LVOC) in acyclic terpene SOA compared to cyclic counterparts (25-37% ELVOC/LVOC). Our findings highlight the potential importance of accounting for acyclic terpene aerosol chemistry under conditions of plant stress to improve predictions of SOA loadings and impacts.

SOA physical properties↗

Silica-volatile interaction and the geological cause of the Xuan Wei lung cancer epidemic

Parts of Xuan Wei County, Yunnan Province, China have the highest known lung cancer mortality in nonsmoking women. This high mortality displays a clear spatial relationship to the mines producing coal from the uppermost Permian. Geochemical, petrographic, and grain size analyses were undertaken on a set of coal samples from Xuan Wei. Results demonstrate that the single geochemical property that makes this coal unusual is its high concentration of quartz (13.5 wt %) of which 35-55% occurs as < 10 {mu}m grains. We propose the potential for silica-volatile interaction (PSVI) as a new method for assessing the combined influence of silica and volatile organic matter and use this as a basis for re-evaluating existing ecological data. Published lung cancer mortality values are more strongly correlated with PSVI values for Xuan Wei coal than with volatiles or silica alone and the PSVI values measured are distinct from those of other coals. Finally we propose that the localization of this epidemic to Xuan Wei results from enhanced weathering of the local Emeishan basalts as a consequence of geochemical perturbations at the Permo-Triassic Boundary.

01 COAL, LIGNITE, AND PEAT↗

Modelling of volatility in monetary transmission mechanism

The aim of this paper is to compare different approaches to modeling of volatility in monetary transmission mechanism. For this purpose we built time-varying parameter VAR (TVP-VAR) model with stochastic volatility and VAR-DCC-GARCH model with conditional variance. The data from three European countries are included in the analysis: the Czech Republic, Germany and Slovakia. Results show that VAR-DCC-GARCH system captures higher volatility of observed variables but main trends and detected breaks are generally identical in both approaches.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Uncorrelated volatile behavior during the 2011 apparition of comet C/2009 P1 Garradd

The High Resolution Instrument Infrared Spectrometer (HRI-IR) on board the Deep Impact Flyby spacecraft detected H{sub 2}O, CO{sub 2}, and CO in the coma of the dynamically young Oort Cloud comet C/2009 P1 (Garradd) post-perihelion at a heliocentric distance of 2 AU. Production rates were derived for the parent volatiles, Q {sub H2O} = 4.6 ± 0.8 × 10{sup 28}, Q {sub CO2} = 3.9 ± 0.7 × 10{sup 27}, and Q {sub CO} = 2.9 ± 0.8 × 10{sup 28} molecules s{sup –1}, and are consistent with the trends seen by other observers and within the error bars of measurements acquired during a similar time period. When compiled with other observations of Garradd's dominant volatiles, unexpected behavior was seen in the release of CO. Garradd's H{sub 2}O outgassing, increasing and peaking pre-perihelion and then steadily decreasing, is more typical than that of CO, which monotonically increased throughout the entire apparition. Due to the temporal asymmetry in volatile release, Garradd exhibited the highest CO to H{sub 2}O abundance ratio ever observed for any comet inside the water snow line at ∼60% during the HRI-IR observations. Also, the HRI-IR made the only direct measurement of CO{sub 2}, giving a typical cometary abundance ratio of CO{sub 2} to H{sub 2}O of 8% but, with only one measurement, no sense of how it varied with orbital position.

79 ASTRONOMY AND ASTROPHYSICS↗

Observed volatilization behavior of silicon carbide in flowing hydrogen above 2000 K

In this work, the intrinsic compatibility of silicon carbide (SiC) and hydrogen (H 2 ) at high temperatures (2000-2473 K) and pressure near one atmosphere was evaluated through a combination of thermodynamic calculations and hot hydrogen exposure testing. Thermodynamic calculations predict the decomposition of SiC in a hydrogen environment to form free silicon (Si) and free carbon (C). Free Si is predicted to vaporize from the surface as a volatile species, while free C may interact with H 2 to form the hydrocarbons CH 4 (T < 2100 K) or C 2 H 2 (T > 2100 K). Coupons of high purity chemical vapor deposition (CVD) β-SiC were exposed to slowly flowing hydrogen at temperatures ranging between 2000 and 2473 K. SiC experienced active attack as the result of H 2 exposure, exhibiting linear weight loss kinetics and an Arrhenius dependence of weight loss on exposure temperature. The linear volatilization constant was experimentally evaluated to correspond with an activation energy of 370 ± 18 kJ/mol. Due to the dependence of observed corrosion rates on gas velocity, corrosion of SiC in flowing H 2 was determined to be governed by external mass transfer of volatile Si species through the boundary layer. Experimentally derived mass losses were in good agreement with mass losses predicted by a boundary layer limited gas diffusion model.

36 MATERIALS SCIENCE↗

Multivariate regression modelling for gender prediction using volatile organic compounds from hand odor profiles via HS-SPME-GC-MS

The efficacy of using human volatile organic compounds (VOCs) as a form of forensic evidence has been well demonstrated with canines for crime scene response, suspect identification, and location checking. Although the use of human scent evidence in the field is well established, the laboratory evaluation of human VOC profiles has been limited. This study used Headspace-Solid Phase Microextraction-Gas Chromatography-Mass Spectrometry (HS-SPME-GC-MS) to analyze human hand odor samples collected from 60 individuals (30 Females and 30 Males). The human volatiles collected from the palm surfaces of each subject were interpreted for classification and prediction of gender. The volatile organic compound (VOC) signatures from subjects’ hand odor profiles were evaluated with supervised dimensional reduction techniques: Partial Least Squares-Discriminant Analysis (PLS-DA), Orthogonal-Projections to Latent Structures Discriminant Analysis (OPLS-DA), and Linear Discriminant Analysis (LDA). The PLS-DA 2D model demonstrated clustering amongst male and female subjects. The addition of a third component to the PLS-DA model revealed clustering and minimal separation of male and female subjects in the 3D PLS-DA model. The OPLS-DA model displayed discrimination and clustering amongst gender groups with leave one out cross validation (LOOCV) and 95% confidence regions surrounding clustered groups without overlap. The LDA had a 96.67% accuracy rate for female and male subjects. The culminating knowledge establishes a working model for the prediction of donor class characteristics using human scent hand odor profiles.

59 BASIC BIOLOGICAL SCIENCES↗