Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “techno”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 271 records · Page 15
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

Hydrothermal liquefaction of wastewater-grown algae to produce synthetic aviation fuel: A combined experimental study and techno-economic assessment

Large-scale algae farms may someday become a consistent source of biomass feedstock for biofuels. Near-term supplies of algal biomass are available at certain water resource recovery facilities as algae cultivation is used as a method for nutrient recovery from specific effluent streams. Algae grown as a service shifts the value to the service rather than its sole use as a feedstock, which could enable the provision of algal biomass at low to no cost to biofuel producers. Hydrothermal liquefaction (HTL) can readily upgrade wet feedstock slurries, such as algae, to produce a carbon-enriched biocrude. The HTL biocrude can be hydrotreated and distilled, producing a variety of distillate fuels, including synthetic aviation fuel (SAF). We present a pathway, showing the experimental production of SAF from wastewater-grown algae via HTL, along with a techno-economic assessment to identify opportunities for process improvements. Critical quality attributes of the SAF, such as density, viscosity, surface tension, and freeze point, were estimated within the expected fuel experience ranges when compared against petroleum jet fuel. The average minimum fuel selling price of fuels from wastewater-grown algae for breakeven economics was $\$9.04$ per gasoline gallon equivalent (GGE). The sale of co-products such as struvite fertilizers and cement additives can add revenue to reduce the net cost. Ultimately, the selling price is influenced by the scale of the HTL processing facility. Adjusting estimations in the process scale, algae yield, and capital cost estimation can lower the price to $\$6.51$/GGE or raise it to $13.07/GGE.

Biofuels↗
DOE OSTI2017

Techno-Economic Analysis of a Secondary Air Stripper Process

We present results of an initial techno-economic assessment on a post-combustion CO2 capture process developed by the Center for Applied Energy Research (CAER) at the University of Kentucky using Mitsubishi Hitachi Power Systems’ H3-1 aqueous amine solvent. The analysis is based on data collected at a 0.7 MWe pilot unit combined with laboratory data and process simulations. The process adds a secondary air stripper to a conventional solvent process, which increases the cyclic loading of the solvent in two ways. First, air strips additional CO2 from the solvent downstream of the conventional steam-heated thermal stripper. This extra stripping of CO2 reduces the lean loading entering the absorber. Second, the CO2-enriched air is then sent to the boiler for use as secondary air. This recycling of CO2 results in a higher concentration of CO2 in the flue gas sent to the absorber, and hence a higher rich loading of the solvent exiting the absorber. A process model was incorporated into a full-scale supercritical pulverized coal power plant model to determine the plant performance and heat and mass balances. The performance and heat and mass balance data were used to size equipment and develop cost estimates for capital and operating costs. Lifecycle costs were considered through a levelized cost of electricity (LCOE) assessment based on the capital cost estimate and modeled performance. The results of the simulations show that the CAER process yields a regeneration energy of 3.12 GJ/t CO2, a $53.05/t CO2 capture cost, and LCOE of $174.59/MWh. This compares to the U.S. Department of Energy’s projected costs (Case 10) of regeneration energy of 3.58 GJ/t CO2 , a $61.31/t CO2 capture cost, and LCOE of $189.59/MWh. For H3-1, the CAER process results in a regeneration energy of 2.62 GJ/tCO2 with a stripper pressure of 5.2 bar, a capture cost of $46.93/t CO2, and an LCOE of $164.33/MWh.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗
DOE OSTI2022

Techno-Economic Analysis of Recuperated Joule-Brayton Pumped Thermal Energy Storage

This article describes a techno-economic model for pumped thermal energy storage systems based on recuperated Joule-Brayton cycles and two-tank liquid storage. Models have been developed for each component, with particular emphasis on the heat exchangers. Economic metrics such as the power and energy capital costs (i.e., per-kW and per-kWh capacity) and levelized cost of storage are evaluated by gathering numerous cost correlations from the literature, thereby enabling estimates of uncertainty. It is found that the use of heat exchangers with effectivenesses up to 0.95 is economically worthwhile, but higher values lead to rapidly escalating component size and system cost. Several hot storage fluids are considered; those operating at the highest temperatures (chloride salts) improve the round-trip efficiency but the benefit is marginal and may not warrant the additional material costs and risk when compared to lower-temperature nitrate salts. Cost-efficiency trade-offs are explored using a multi-objective optimization algorithm, yielding optimal designs with round-trip efficiencies in the range 59-72% and corresponding levelized storage costs of 0.12 0.03 and 0.38 0.10 $/kWhe. Lifetime costs are competitive with lithium-ion batteries for discharging durations greater than 6 h under current scenarios.

Carnot battery↗
DOE OSTI2022

A techno-economic assessment framework for hydrogen energy storage toward multiple energy delivery pathways and grid services

Hydrogen energy storage (HES) transforms and stores electric energy from the grid into hydrogen, and supplements other energy storage and demand response resources in addressing challenges in renewable-intensive power systems. Understanding how to optimally utilize an HES system to maximize its economic benefits from stacked value streams is highly important to its development and deployment. Here, in this paper, we present a techno-economic assessment framework for an HES system considering three common energy delivery pathways and multiple grid and end-user services. Models are developed to capture the operational capability, flexibility, and constraints associated with hydrogen production, compression, storage, and utilization as well as different grid services in an economic assessment. To define the technically achievable benefits, an optimal dispatch formulation is proposed to maximize the economic benefits over a representative year with an hourly time step considering the trade-offs among different value streams. Representative case studies are designed and carried out to show how system configuration, energy delivery pathways, and grid services may affect economic benefits. It was found that value streams from bundling grid services account for up to 76% of the total benefits and are critical for an HES project to be financially viable.

25 ENERGY STORAGE↗
DOE OSTI2019

PART 1- techno-economic analysis of a grid scale Ground-Level Integrated Diverse Energy Storage (GLIDES) technology

In this paper, a techno-economic model / cost reduction analysis of a low-cost, dispatchable / scalable, efficient Ground-Level Integrated Diverse Energy Storage (GLIDES) system is analyzed, along with a review of existing state-of-the-art energy storage technologies. The introduced technology, GLIDES, which was invented at the Oak Ridge National Laboratory (ORNL), stores energy by compression and expansion of air using water as a liquid piston inside high-pressure reservoirs. GLIDES is introduced by combining Pumped Hydroelectric Storage (PHS) and Compressed Air Energy Storage (CAES) technologies. Here, by replacing inefficient gas compressor and turbine with higher efficiency liquid turbomachines for liquid-piston compression/expansion, GLIDES achieves higher roundtrip efficiency than other gas compression-based energy storage technologies and is a scalable energy storage system. For cost reduction purposes, various pressure reservoirs including steel vessels, carbon fiber vessels, pipe segments, and underground pressure reservoirs are analyzed in this paper. Based on the analyzed data using the models discussed in this paper, energy storage costs as low as ~$14/kWh and ~346/kWh (roundtrip efficiency (RTE) ~80%) can be achieved for a grid-scale GLIDES using depleted oil/gas reservoirs and high-pressure pipe segments respectively.

25 ENERGY STORAGE↗
DOE OSTI2017

Techno-economic and thermodynamic analysis of pre-cooling systems at gaseous hydrogen refueling stations

In this study, we conducted a techno-economic and thermodynamic analysis of precooling units (PCUs) at hydrogen refueling stations and developed a cost-minimizing design algorithm for the PCU observing the SAE J2601 refueling protocol for T40 stations. In so doing, we identified major factors that affect PCU cost and energy use. The hydrogen precooling energy intensity depends strongly on the station utilization rate, but approaches 0.3 kWh e /kg-H 2 at full utilization. In early fuel cell electric vehicle markets where utilization of the refueling capacity is low, the overhead cooling load (to keep the heat exchanger cold at -40°C) results in significantly high PCU energy intensity because only a small amount of hydrogen is being dispensed. We developed a parameterized precooling energy intensity prediction formula as a function of the ambient temperature and station utilization rate. We also found that the Joule-Thomson effect of the flow control device introduces a significant increase in temperature upstream of the PCU’s heat exchanger (HX), which impacts the PCU design capacity. An optimal PCU (per dispenser, at 35°C HX inlet temperature) consists of a 13-kW refrigerator and a HX with 1400 kg of thermal mass (aluminum), which currently costs $70,000 (uninstalled). Finally, the total (installed) capital and operation cost of PCU at a fully utilized hydrogen refueling station adds $0.50/kg-H 2 .

08 HYDROGEN↗
DOE OSTI2023

A techno-economic evaluation of solar-powered green hydrogen production for sustainable energy consumption in Belgium

Here this study focuses on the production and consumption of solar-powered green hydrogen in Belgium by comparing the costs of domestic production with those of imports from Morocco and Namibia. The levelized cost of hydrogen (LCOH) is determined via a techno-economic assessment considering various parameters including, power connectivity, electrolyzer types, location factors, and risk premium. The results show that the lowest LCOH can be achieved by on-grid Proton exchange membrane electrolyzers (PEMEL). LCOH of production in Belgium, Morocco, and Namibia with a PEMEL on-grid system are 5.64, 6.32 and 5.13 euro/kg H 2 , respectively. Thus, importing hydrogen from Namibia to Belgium is more competitive than domestic production. The sensitivity analysis suggests that a target LCOH of 3 euro/kg H 2 is achievable by importing from Namibia through various cost combinations. One of these combinations involves reducing the cost of PV panels to 222.3 euro/kW (70% reduction) and electrolyzers to 363.3 euro/kW (25% reduction).

08 HYDROGEN↗
DOE OSTI2021

Process modeling, techno-economic assessment, and life cycle assessment of the electrochemical reduction of CO 2 : a review

The electrochemical reduction of CO 2 has emerged as a promising alternative to traditional fossil-based technologies for the synthesis of chemicals. Its industrial implementation could lead to a reduction in the carbon footprint of chemicals and the mitigation of climate change impacts caused by hard-to-decarbonize industrial applications, among other benefits. However, the current low technology readiness levels of such emerging technologies make it hard to predict their performance at industrial scales. During the past few years, researchers have developed diverse techniques to model and assess the electrochemical reduction of CO 2 toward its industrial implementation. The aim of this literature review is to provide a comprehensive overview of techno-economic and life cycle assessment methods and pave the way for future assessment approaches. First, we identify which modeling approaches have been conducted to extend analysis to the production scale. Next, we explore the metrics used to evaluate such systems, regarding technical, environmental, and economic aspects. Finally, we assess the challenges and research opportunities for the industrial implementation of CO 2 reduction via electrolysis.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Home charging for all: Techno-economic and life cycle assessment of multi-unit dwelling electric vehicle charging hubs

Ubiquitous electric vehicle adoption can drastically reduce greenhouse gas emissions (GHG) but will require equitable home charging infrastructure for all residences. Unlike single-family homes, Multi-Unit Dwellings (MUD) currently lack market share and access to nearby charging infrastructure partly due to expensive capital costs for reluctant residential property-owners. Further, this work evaluates the levelized cost of charging (LCOC) for Battery Electric Vehicles (BEVs) at MUD community charging hubs through a techno-economic analysis (TEA) that leverages real-world charging data and costs. Three different MUD charging types are investigated for a baseline and optimistic case: 1.9-kW Level 1 (L1), 6.6-kW Level 2 (L2), and 50-kW Direct Current Fast Charging (DCFC) stations under three different ownership models: resident, utility, and private company. Results demonstrate L1 and L2 chargers to be less expensive than the gasoline equivalent across the United States. Further, utility and private company ownership models, which avoid initial costs for residential property owners, result in a large LCOC premium for L1 and moderate LCOC premium for L2 relative to the resident ownership model. In contrast, DCFC is shown to be expensive for baseline scenarios but economical for optimistic scenarios especially under private company ownership. This work also performs a cradle to grave (C2G) life cycle assessment (LCA) of an average passenger BEV and gasoline conventional vehicle (CV) using yearly (grid mix & vehicle parameters), hourly (grid mix), and state-level (grid mix) resolution. Results show BEVs to have lower GHG emissions (-86% to-10%) than gasoline CVs in the contiguous U.S. Next, the system boundary of the TEA is extended to the total cost of ownership (TCO) of BEVs. The TCO is then coupled with the C2G GHG emissions to calculate the cost of GHG emissions reduction. Ultimately, the cost of GHG emissions reduction from MUD BEVs relative to gasoline CVs is shown to be negative for every scenario except baseline DCFC, meaning MUD BEV charging infrastructure can be a cost-effective endeavor to reduce GHG emissions.

33 ADVANCED PROPULSION SYSTEMS↗
DOE OSTI2022

Conversion of food waste to renewable energy: A techno-economic and environmental assessment

Increasing quantities of food waste have become a concern due to high disposal costs in landfills and high greenhouse gas emissions. With this increase in food waste generation, there is also an increasing demand for renewable natural gas to supplement traditional fossil fuel combustion and offset the impacts of climate change. Collecting food waste from landfills and turning it into renewable natural gas using anaerobic digestion could be a win-win option for both food waste disposal and renewable energy production. While some literature exists on the energy potential, economic feasibility, and environmental benefit of food waste disposal via anaerobic digestion, no existing study simultaneously evaluates the energy, economic and environmental effect of food waste to renewable energy via anaerobic digestion, especially on a plant and city scale. Further, this study is focused on the techno-economic and environmental assessment of food waste to energy via anaerobic digestion in order to fill this gap. Four anaerobic digestion pathways are considered in this study: flare, pipeline natural gas, combined heat and power, and combined cycle for efficient power generation. Using a city of 1M people the results show that renewable natural gas from food waste could supply the natural gas usage for 1.9% of residential use, 2.7% of commercial use, 1.1% of industrial use, 167.5% of the compressed natural gas vehicle fleet, 0.7% of electric power generation, or 2.5% of industrial high-temperature heating processes. All pathways except pipeline natural gas will have a positive net present value in the baseline scenario, and the pipeline natural gas pathway will become economically viable with a net present value of 31 USD/t of food waste with renewable energy credits. Lastly, all of the pathways achieve negative greenhouse gas emissions, which indicates that anaerobic digestion is a more environmentally friendly method for the handling of food waste than landfills.

03 NATURAL GAS↗
DOE OSTI2024

Implications of pond reliability on the techno-economic and life cycle environmental impacts of algal biofuels

Despite extensive research on algal bioproducts, there is limited understanding of how pond contamination affects their economics and environmental impacts. This work compared the costs and environmental impacts of algal biofuels across different pond failure scenarios. Pond failure was simulated by a reliability model based on pond mean-time-to-failure (MTTF). The reliability model was integrated with a process model to analyze the impacts of pond failure on the operations of algal farms and biorefineries. Process model outputs were used for techno-economic analysis and life cycle assessment to determine the minimum fuel selling price (MFSP), global warming potential (GWP), and freshwater consumption impacts of algal biofuels for five MTTF scenarios of 20, 54, 80,120, and 350 days, assuming an average mean-time-to-reset of 7 days. Results show that higher MTTFs reduce the cost and environmental impact of algal biofuels, but with diminishing returns. The average MFSPs for the 20-day, 54-day, and 350-day MTTF scenarios were $\$3.52$, $\$2.54$, and $\$2.10$ per liter of gasoline equivalent, respectively. The GWP for the same scenarios were 131, 96, and 83 g CO 2eq MJ –1 , respectively. This study highlights the significant impact of larger seed trains, required under low MTTFs, on the costs and greenhouse gas emissions of algal biofuels. Moreover, the work shows that algal biofuels fail to be cost-competitive with conventional fuels, even when productivities are increased from 17 to 35 g m –2 d –1 . Furthermore, this work is the first to explore the implications of pond failure on the sustainability of algal biofuels and provides valuable insights to algae farmers on how to reduce the costs and financial risks of algal cultivation through process design and pond management strategies.

09 BIOMASS FUELS↗
DOE OSTI2019

Sustainability of carbon delivery to an algal biorefinery: A techno-economic and life-cycle assessment

Supplementation of carbon is critical for high productivity cultivation of most microalgae. Moreover, using microalgae for atmospheric CO 2 mitigation to combat climate change is promising as waste sources and atmospheric CO 2 can be utilized to produce useful products. The challenge is developing technologies, processes, and strategies that utilize carbon efficiently such that the overall system is sustainable. Through engineering system modeling combined with techno-economic and life-cycle assessments, this study examined the implications of various delivery methods of carbon to a production-scale algal biorefinery. Five primary carbon sources were considered: atmospheric CO 2 ; CO 2 from direct chemical or power plant waste emissions; CO 2 that has been concentrated from waste sources and compressed; inorganic carbon in the form of hydrogen carbonate; and organic carbon in the form of cellulosic sugars derived from corn stover. Each source was evaluated assuming co-location as well as pipeline transportation up to 100 km. Sustainability results indicate that economics are more prohibitive than energy and emissions. Furthermore, of the scenarios evaluated, only two met both the economic and environmental criteria of contributing less than 0.50 US-$ GGE -1 and 20 g CO 2-eq MJ -1 to the overall system, respectively: uncompressed, pure sources of gaseous CO 2 with pipeline transportation of 40 km or less; and compressed, supercritical CO 2 from pure sources for pipeline transportation up to 100 km. A first order scalability assessment of algal biofuels based on these results shows carbon to be a limiting nutrient in an algal biorefinery with a total US production capability of 360 million gallons of fuel per year.

42 ENGINEERING↗
DOE OSTI2025

Techno-economic assessment of residential PV system tariff policies in Jordan

This study assesses the economic and technical performance of four energy policy scenarios for Jordan's residential photovoltaic (PV) systems: net metering, net billing, zero-export with battery storage, and sell-all-buy-all. With the recent introduction of time-of-use (TOU) tariffs and policies addressing the “duck curve” effect, the research focuses on optimizing PV system sizing across different regulatory frameworks. A detailed techno-economic analysis evaluates these scenarios based on energy production, cost savings, payback periods, and energy self-sufficiency. The findings indicate that net metering and net billing offer the highest cost savings and the shortest payback periods (∼3 years). While the zero-export strategy with battery storage enhances energy self-sufficiency by up to 70%, it requires a higher upfront investment. The sell-all-buy-all scenario supports larger system sizes, achieving a low levelized cost of electricity (0.0696 USD/kWh) and a net present value of 619 USD. Additionally, the study identifies a critical feed-in tariff threshold of 0.055 USD/kWh, at which net billing becomes as financially attractive as net metering. Here, these insights offer valuable recommendations for policymakers to optimize net billing rates and TOU tariffs, promoting the expansion of Jordan's renewable energy sector.

Battery storage↗
DOE OSTI2017

Bioethanol enrichment using zeolite membranes: Molecular modeling, conceptual process design and techno-economic analysis

Lignocellulosic biomass-derived ethanol offers a potential alternative to fossil-derived fuels. However, the energy-intensive nature of its recovery process, i.e., a sequence of two distillation columns – beer and rectification columns - enriching from 5 to 37, and 37–93 wt%, respectively, limits its environmental and economic benefits. Here, in this paper, we assess the potential of using zeolite membranes for bioethanol recovery. Atomistic-level and molecular dynamic simulations are performed to determine adsorption and diffusion properties of the ethanol-water mixture in zeolite membranes. These properties are modeled using the real adsorption solution theory and the Maxwell-Stefan equations to describe permeation through the zeolite membranes. A comparison of steady state permeance and selectivity predicted by the model with the values from experiments suggests that the simulated membranes are more permeable and selective than the real membranes. This is attributed to the presence of structural non-idealities and hydrophilic defects in real membranes, while the adsorption and diffusion properties obtained using molecular simulations reflect the behavior in ideal crystals. Thus, a reduced diffusivity model with an empirical relation for enhanced water adsorption is used to capture similar performance as that obtained by real membranes. This model is further used in developing conceptual process designs to assess the viability of zeolite membranes for bioethanol enrichment in industry. Both hydrophobic and hydrophilic zeolite membranes are considered. Hydrophobic zeolite membranes show potential for energy savings but lack in separation performance. On the other hand, hydrophilic zeolite membranes can achieve the separation target but result in no energy savings. Thus, a configuration that uses a combination of hydrophobic and hydrophilic membranes is proposed. It can achieve the separation target and results in 15% energy savings over distillation. Techno-economic analysis suggests that ~ 10-fold improvements in permeation or equivalent cost reductions are required for economic viability of this scheme.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Techno-economic and life-cycle analysis of strategies for improving operability and biomass quality in catalytic fast pyrolysis of forest residues

Many of the challenges faced by the first commercial biorefineries were associated with feedstock handling, quality, and cost. Strategies are needed to enable further expansion of biorefineries and meet the growing demand for bio-based fuels and products. Here, we examine 2 key feedstock challenges and mitigation strategies in the context of a catalytic fast pyrolysis (CFP) biorefinery: (1) the operability of the feed system, which may be improved by modifying the minimum particle size fed to the reactor, and (2) the quality of the biomass, which may be improved by employing air classification to remove undesirable material and increase fuel yields. We conduct techno-economic analysis (TEA) and life-cycle analysis for these strategies, employing a discrete event simulation model for biomass preprocessing combined with a series of correlations developed from literature data and a rigorous CFP conversion model. Our results highlight the importance of balancing increased cost and material losses from preprocessing against improved operability and fuel yields. Economics and sustainability were optimized when operating at the lowest minimum particle size, emphasizing the importance of minimizing material losses while maintaining the operability of the process. Economically, additional costs and material losses from air classification could be acceptable due to improved biomass conversion, and an optimum air classification speed was identified; however, the fuel GHG emissions were minimized when air classification was not used. Valorizing material removed during preprocessing as a coproduct could improve economics and sustainability, decreasing the burden of material losses.

09 - BIOMASS FUELS↗
DOE OSTI2025

Techno-economic analysis of sugarcane bagasse and straw conversion into cellulosic ethanol via consolidated bioprocessing

Cellulosic biofuels offer a sustainable alternative to fossil fuels and a means to mitigate climate change. Consolidated bioprocessing (CBP) featuring engineered thermophilic bacteria, combined with mechanical disruption during fermentation (cotreatment), has potential to lower production costs compared to featuring thermochemical pretreatment and added cellulase. A techno-economic analysis was conducted (230 million L ethanol/year) from sugarcane bagasse and straw at stand-alone facilities generating electricity from residues. Three scenarios were evaluated: Conventional, featuring hydrothermal pretreatment, fungal cellulase, and yeast fermentation (current commercial standard); Mid-term CBP, relying on bagasse solubilization without pretreatment or cotreatment; and Mature CBP, incorporating cotreatment but no pretreatment. Results for these scenarios in this order were: fixed capital investment (CapEx) $\$$589M, $\$$658M, and $\$$472M; net annual revenue (EBITDA) $\$$56M, $\$$96M, and $\$$94M; and minimum ethanol selling price 0.73, 0.61, and 0.48 US$\$$/L. Payback periods were 10.5, 6.9, and 5.1 years, while all scenarios showed <5 years at European prices for scales >100M L/year. Sensitivity and risk analysis highlighted ethanol price as the most critical variable. It is notable that Mid-term CBP had shorter payback times and better overall economic feasibility compared to Conventional. Our results underscore opportunities for research-driven innovation on low-cost cellulosic ethanol technologies in Brazil and elsewhere.

Consolidated bioprocessing↗
DOE OSTI2024

Evaluation of sustainable waste management: An analysis of techno-economic and life cycle assessments of municipal solid waste sorting and decontamination

This study evaluates the economic and environmental feasibility of Municipal Solid Waste (MSW) sorting and decontamination technologies across urban, suburban, and rural areas. Using Techno-Economic Analysis (TEA) and Life Cycle Assessment (LCA), the research assesses cost-effectiveness and environmental impacts, with a focus on cost variability analyzed through Monte Carlo simulations. Findings indicate significant cost differences based on population density: rural areas incur high costs up to $$764/ton due to low waste volumes and limited infrastructure, whereas suburban and urban areas have more feasible costs ranging from $36.3 to $142.5/ton. Environmental impacts also vary, with greenhouse gas emissions at 171 kg CO 2 eq/ton for copy paper and 118.6 kg CO 2 eq/ton for plastics. PM2.5 levels are 9.1 g/ton for copy paper and 6.3 g/ton for plastics, with sorting lines being the main contributors. Monte Carlo simulations reveal a 50% probability of costs being below $$102.26/ton for copy paper and $115.8/ton for plastics in suburban settings. Further, the study underscores the importance of customized waste management strategies to improve economic viability and sustainability based on local conditions.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗
DOE OSTI2026

Ambient-Pressure Chemical Recycling of Thermoset Carbon Fiber-Reinforced Polymers via Low-Temperature Solvolysis: Techno-Economic and Life-Cycle Assessment

Carbon fiber-reinforced polymer (CFRP) waste is rapidly accumulating, with global volumes projected to exceed 500,000 tons annually by 2050. Virgin carbon fiber production is extremely energy- and cost-intensive, and growing demand has intensified supply-chain vulnerabilities associated with precursor availability and reliance on critical materials. Scalable recycling technologies therefore offer not only environmental benefits but also opportunities to reduce material costs and strengthen domestic composite supply chains. This study introduces an efficient, mild chemical recycling method for epoxy-amine CFRPs, utilizing acetic acid (80 wt%) and zinc acetate (1 wt%) at atmospheric pressure and low temperature (~110 °C). The solvolysis process preserves residual resin (~40%) on recycled carbon fibers (rCF), enhancing interfacial bonding in remanufactured composite materials. Recycled fibers retain ~90% of their mechanical properties, and recovered oligomers show potential for reuse in epoxy formulations, supporting material circularity. Techno-economic analysis (TEA) and life-cycle assessment (LCA) confirm the scalability and sustainability of this process.

Recycling CFRP↗