SEARCH · Engineering Papers

Results for “surface roughness”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 271 records · Page 15

All sources NASA NTRS DOE OSTI

NASA NTRS2021

Impact of Random and Periodic Surface Roughness on P- and L-band Radiometry

L-band passive microwave remote sensing is currently considered a robust technique for global monitoring of soil moisture. However, soil roughness complicates the relationship between brightness temperature and soil moisture, with current soil moisture retrieval algorithms typically assuming a constant roughness parameter globally, leading to a potential degradation in retrieval accuracy. This current investigation established a tower-based experiment site in Victoria, Australia. P-band (~40-cm wavelength/0.75 GHz) was compared with L-band (~21-cm wavelength/1.41 GHz) over random and periodic soil surfaces to determine if there is an improvement in brightness temperature simulation and soil moisture retrieval accuracy for bare soil conditions, due to reduced roughness impact when using a longer wavelength. The results showed that P-band was less impacted by random and periodic roughness than L-band, evidenced by more comparable statistics across different roughness conditions. The roughness effect from smooth surfaces (e.g., 0.8-cm root-mean-square height and 11.1-cm correlation length) could be potentially ignored at both P- and L-band with satisfactory simulation and retrieval performance. However, for rougher soil (e.g., 1.6-cm root-mean-square height and 6.8-cm correlation length), the roughness impact needed to be accounted for at both P- and L-band, with P-band observations showing less impact than L-band. Moreover, a sinusoidal soil surface with 10-cm amplitude and 80-cm period substantially impacted the brightness temperature simulation and soil moisture retrieval at both P- and L-band, which could not be fully accounted for using the SMOS and SMAP default roughness parameters. However, when retrieving roughness parameters along with soil moisture, the ubRMSE at P-band over periodic soil was improved to a similar level (0.01-0.02 m3/m3) as that of smooth flat soil (0.01 m3/m3), while L-band showed higher ubRMSE over the periodic soil (0.03-0.04 m3/m3) than over smooth flat soil (0.01 m3/m3). Accordingly, periodic roughness effects were reduced by using observations at P-band.

Soil roughness↗

NASA NTRS1978

Backscattering from a Gaussian-distributed perfectly conducting rough surface

The original intent of the reported investigation was to find a solution to the composite surface scattering problem which provided for a continuous transition between the near-specular physical optics and wide-angle tilted plane Bragg solutions. The employed approach is based on analytical techniques rather than physical considerations. The analysis employs a perturbation technique developed by Burrows (1967, 1968, 1973), which because of its simplicity, is the key to the entire solution. The analysis is restricted to the case of backscattering from a perfectly conducting surface. General expressions are presented for the scattering from a Gaussian perfectly conducting surface characterized by an anisotropic spectrum and possessing many scales of roughness. The accuracy of the result is dependent upon the large-scale structure having large height excursions and small curvature.

Brown, G. S.↗

NASA NTRS1985

Inverse methods in rough-surface scattering

For the case of unknown surfaces, which can only be studied by means of remote sensors, roughness scale relative to incident wavelength can be determined through the examination of angular scattering characteristics in both vertically and horizontally polarized states. Generally, an angular backscattering curve without polarization dependence indicates scattering by roughness scales that are larger than the incident wavelength. Over angular regions where both vertical and horizontal returns are well separated, the scattering must be dominated by roughness scales that are small by comparison with wavelength.

Fung, A. K.↗

NASA NTRS2005

Dust Devils on Mars: Effects of Surface Roughness on Particle Threshold

Dust devils have been proposed as effective mechanisms for lofting large quantities of dust into the martian atmosphere. Previous work showed that vortices lift dust more easily than simple boundary layer winds. The aim of this study is to determine experimentally the effects of non-erodable roughness elements on vortex particle threshold through laboratory simulations of natural surfaces. Additional information is included in the original extended abstract.

Neakrase, Lynn D.↗

NASA NTRS1988

The geological interpretation of photometric surface roughness

A computer-generated km-scale relief map, whose topographic facets on scales of less than a few m are assumed to have smooth particulate surfaces, is the basis of the present investigation of the relationship between photometrically-derived values of Hapke's (1984) roughness parameter theta and topographic scale. The addition of m-km scale-range relief to the otherwise smooth surface alters integral photometric behavior in a way that is consistent with Hapke's equation; the roughness characterized by theta is an integral property over all scales up to the resolution limit of the photometric data used in its determination. With sufficient phase angle coverage, theta can distinguish terrains with very different integral roughnesses.

Helfenstein, Paul↗

NASA NTRS1972

Temperature of the rough lunar surface.

The effect of lunar surface roughness on the lunar surface temperatures is investigated. It is shown that the apparent surface temperature varies significantly according to the observation angle at a given solar elevation. This is due to the surface roughness which is postulated as a level surface interspersed with craters. The temperatures of craters and flat surfaces are obtained analytically. The apparent temperature is the result of the contribution of craters and flat regions whose ratio is derived from earth-based measurements. The results are compared with experimental data.

Adorjan, A. S.↗

NASA NTRS1994

Venusian Surface Roughness Inversion Using Two Scale Approximation

Magellan was launched on May 4, 1989 on the Shuttle Atlantis in order to achieve global imaging of the Venus surface.

Venus radar mapping surface morphology electrical ↗

NASA NTRS1987

Use of a liquid-crystal, heater-element composite for quantitative, high-resolution heat transfer coefficients on a turbine airfoil, including turbulence and surface roughness effects

Local heat transfer coefficients were measured along the midchord of a three-times-size turbine vane airfoil in a static cascade operated at roon temperature over a range of Reynolds numbers. The test surface consisted of a composite of commercially available materials: a Mylar sheet with a layer of cholestric liquid crystals, which change color with temperature, and a heater made of a polyester sheet coated with vapor-deposited gold, which produces uniform heat flux. After the initial selection and calibration of the composite sheet, accurate, quantitative, and continuous heat transfer coefficients were mapped over the airfoil surface. Tests were conducted at two free-stream turbulence intensities: 0.6 percent, which is typical of wind tunnels; and 10 percent, which is typical of real engine conditions. In addition to a smooth airfoil, the effects of local leading-edge sand roughness were also examined for a value greater than the critical roughness. The local heat transfer coefficients are presented for both free-stream turbulence intensities for inlet Reynolds numbers from 1.20 to 5.55 x 10 to the 5th power. Comparisons are also made with analytical values of heat transfer coefficients obtained from the STAN5 boundary layer code.

Hippensteele, Steven A.↗

NASA NTRS1987

Use of a liquid-crystal and heater-element composite for quantitative, high-resolution heat-transfer coefficients on a turbine airfoil including turbulence and surface-roughness effects

Local heat transfer coefficients were measured along the midchord of a three-times-size turbine vane airfoil in a static cascade operated at room temperature over a range of Reynolds numbers. The test surface consisted of a composite of commercially available materials: a Mylar sheet with a layer of cholestric liquid crystals, which change color with temperature, and a heater made of a polyester sheet coated with vapor-deposited gold, which produces uniform heat flux. After the initial selection and calibration of the composite sheet, accurate, quantitative, and continuous heat transfer coefficients were mapped over the airfoil surface. Tests were conducted at two free-stream turbulence intensities: 0.6 percent, which is typical of wind tunnels; and 10 percent, which is typical of real engine conditions. In addition to a smooth airfoil, the effects of local leading-edge sand roughness were also examined for a value greater than the critical roughness. The local heat transfer coefficients are presented for both free-stream turbulence intensities for inlet Reynolds numbers from 1.20 to 5.55 x 10 to the 5th power. Comparisons are also made with analytical values of heat transfer coefficients obtained from the STAN5 boundary layer code.

Hippensteele, S. A.↗

NASA NTRS1974

Effects of surface roughness on the aerodynamic characteristics of the modified 089 B shuttle orbiter at Mach 6 (LA15)

A one hundredth scale model of the modified 089B shuttle orbiter was tested in the Langley 20-Inch Mach 6 tunnel. Force and moment, surface pressure and oilflow data were obtained on one model, and phase-change coating data were obtained on another. The pressure tests were conducted first; the tubes were clipped near the base of the model and then the force and moment and oil flow tests conducted. Angles of attack for the tests were from 20 deg to 35 deg and are commensurate with the range of flight values from entry down to Mach 5. The design flight Reynolds number at Mach 6, based on model length, was 15 million, which could not be obtained in the tunnel; therefore, the tests were conducted at the highest and lowest values for this model in the tunnel, 9.4 million and 4.0 million, respectively, to indicate Reynolds number effects. Two control deflection combinations, representative of the bank and pitch control limits of the design flight trajectory, were used.

Ashby, G. C., Jr.↗

NASA NTRS1973

Numerical comparisons of a modified Rayleigh approach with other rough surface EM scattering solutions.

A modification of the classical Rayleigh technique utilizing the fast Fourier transform, developed into the so-called Rayleigh-FFT method for electromagnetic scattering, is shown to obtain valid scattering results from arbitrary irregular periodic structures composed of a rough layer over a rough half-space. The considerable usefulness of the Rayleigh approach is thus established, and Beckmann's (1968) contention (that the convergence of the method is reasonably rapid only if the roughness is very slight) is refuted.

Jiracek, G. R.↗

NASA NTRS1991

The effects of Reynolds number, rotor incidence angle and surface roughness on the heat transfer distribution in a large-scale turbine rotor passage

A combined experimental and computational program was conducted to examine the heat transfer distribution in a turbine rotor passage geometrically similar to the Space Shuttle Main Engine (SSME) High Pressure Fuel Turbopump (HPFTP). Heat transfer was measured and computed for both the full span suction and pressure surfaces of the rotor airfoil as well as for the hub endwall surface. The objective of the program was to provide a benchmark-quality database for the assessment of rotor heat transfer computational techniques. The experimental portion of the study was conducted in a large scale, ambient temperature, rotating turbine model. The computational portion consisted of the application of a well-posed parabolized Navier-Stokes analysis of the calculation of the three-dimensional viscous flow through ducts simulating a gas turbine package. The results of this assessment indicate that the procedure has the potential to predict the aerodynamics and the heat transfer in a gas turbine passage and can be used to develop detailed three dimensional turbulence models for the prediction of skin friction and heat transfer in complex three dimensional flow passages.

Blair, M. F.↗

NASA NTRS1988

Interactions of light with rough dielectric surfaces - Spectral reflectance and polarimetric properties

The nature of the interactions of visible and NIR radiation with the surfaces of rock and mineral samples was investigated by measuring the reflectance and the polarization properties of scattered and reflected light for slab samples of obsidian and fine-grained basalt, prepared to controlled surface roughness. It is shown that the degree to which radiation can penetrate a surface and then scatter back out, an essential criterion for mineralogic determinations based on reflectance spectra, depends not only upon the composition of the material, but also on its physical condition such as sample grain size and surface roughness. Comparison of the experimentally measured reflectance and polarization from smooth and rough slab materials with the predicted models indicates that single Fresnel reflections are responsible for the largest part of the reflected intensity resulting from interactions with the surfaces of dielectric materials; multiple Fresnel reflections are much less important for such surfaces.

Yon, S. A.↗

NASA NTRS2020