Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “surface”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 271 records · Page 15

Surface Morphology and Surface Stability against Oxygen Loss of the Lithium-Excess Li 2 MnO 3 Cathode Material as a Function of Lithium Concentration

There is a growing appreciation for the role of surface reactivity and subsequent reconstruction affecting the performance of high-voltage, high-capacity Li-ion cathode materials. In particular, the promising Li-excess materials are known to exhibit significant vulnerability toward oxygen release, which can cause surface densification and impede Li intercalation. In this work, we focus on the end member, Li 2 MnO 3 , as a Li-excess, Mn-rich representative of this class of materials and systematically elucidate all possible stoichiometric low Miller index surfaces with various cation ordering on each surface. We apply surface cation reconstruction rules that depend on the local environment, including target Mn-Li site exchanges, and optimize the resulting surface Li configurations using metadynamics. The equilibrium Wulff shape shows dominant (001), (010) surface facets, and almost all facets exhibit favorable Mn reconstruction. Most importantly, we find that while all equilibrium Li x MnO 3 surfaces become unstable toward oxygen release for x < 1.7, some facets are consistently more resistant than others which may provide a design metric for more stable particle morphologies and enhanced surface oxygen retention.

36 MATERIALS SCIENCE↗

Surface relaxation effect on the distributions of energy and bulk stresses in the vicinity of Cu surface: An embedded-atom method study

Molecular statics simulations combined with an embedded-atom method potential were performed to calculate the distributions of energy and bulk stresses in crystalline and amorphous Cu slabs and to examine the effect of surface relaxation on the distributions of energy and bulk stresses in the surface region. The results reveal that a release of energy and bulk stresses in the surface region occurs upon surface relaxation. The profile of energy release upon surface relaxation of a crystalline Cu slab exhibits oscillatory damping from the topmost layer to the interior layers, while that of an amorphous Cu slab exhibits monotonic decreasing. A great diversity of patterns was observed in the profiles of bulk stresses released upon surface relaxation, which may exhibit anisotropy according to the symmetry of the surface considered. Both the profiles of energy release and bulk stress release exhibit surface-orientation dependence. The present results may provide useful information to analyze different phenomena at Cu surfaces.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

X-ray photoemission analysis of chemically treated GaTe semiconductor surfaces for radiation detector applications

The surface of the layered III-VI chalcogenide semiconductor GaTe was subjected to various chemical treatments commonly used in device fabrication to determine the effect of the resulting microscopic surface composition on transport properties. Various mixtures of H{sub 3}PO{sub 4}:H{sub 2}O{sub 2}:H{sub 2}O were accessed and the treated surfaces were allowed to oxidize in air at ambient temperature. High-resolution core-level photoemission measurements were used to evaluate the subsequent chemistry of the chemically treated surfaces. Metal electrodes were created on laminar (cleaved) and nonlaminar (cut and polished) GaTe surfaces followed by chemical surface treatment and the current versus voltage characteristics were measured. The measurements were correlated to understand the effect of surface chemistry on the electronic structure at these surfaces with the goal of minimizing the surface leakage currents for radiation detector devices.

36 MATERIALS SCIENCE↗

Evolution of surface stress during oxygen exposure of clean Si(111), Si(100), and amorphous Si surfaces

The evolutions of the surface stress of Si(111)-7 × 7, Si(100)-2 × 1, and a-Si surfaces upon oxygen exposure at pO{sub 2} = 1 × 10{sup −4} Pa and room temperature have been investigated in a comparative manner using a specimen-curvature based technique. To this end, a generally applicable, dedicated set of experiments has been devised and performed to deduce and correct for the surface stress change owing to oxygen reaction(s) at the (poorly-defined) back face of the specimen only. On this basis, it could be demonstrated that exposure of clean Si(111)-7 × 7, Si(100)-2 × 1 and a-Si surfaces to pure oxygen gas results in compressive surface stress changes for all three surfaces due to the incorporation of oxygen into Si backbonds. The measured surface stress change decreases with decreasing atomic packing density at the clean Si surfaces, which complies well with the less-densily packed Si surface regions containing more free volume for the accommodation of adsorbed O atoms.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Diffusion of hydrogen interstitials in the near-surface region of Pd(111) under the influence of surface coverage and external static electric fields

Past scanning tunneling microscopy (STM) experiments of H manipulation on Pd(111), at low temperature, have shown that it is possible to induce diffusion of surface species as well as of those deeply buried under the surface. Several questions remain open regarding the role of subsurface site occupancies. In the present work, the interaction potential of H atoms with Pd(111) under various H coverage conditions is determined by means of density functional theory calculations in order to provide an answer to two of these questions: (i) whether subsurface sites are the final locations for the H impurities that attempt to emerge from bulk regions, and (ii) whether penetration of the surface is a competing route of on-surface diffusion during depletion of surface H on densely covered Pd(111). We find that a high H coverage has the effect of blocking resurfacing of H atoms travelling from below, which would otherwise reach the surface fcc sites, but it hardly alters deeper diffusion energy barriers. Penetration is unlikely and restricted to high occupancies of hcp hollows. In agreement with experiments, the Pd lattice expands vertically as a consequence of H atoms being blocked at subsurface sites, and surface H enhances this expansion. STM tip effects are included in the calculations self-consistently as an external static electric field. The main contribution to the induced surface electric dipoles originates from the Pd substrate polarisability. We find that the electric field has a non-negligible effect on the H-Pd potential in the vicinity of the topmost Pd atomic layer, yet typical STM intensities of 1-2 VÅ{sup −1} are insufficient to invert the stabilities of the surface and subsurface equilibrium sites.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Dynamics of the contact between a ruthenium surface with a single nanoasperity and a flat ruthenium surface: Molecular dynamics simulations

We study the dynamics of the contact between a pair of surfaces (with properties designed to mimic ruthenium) via molecular dynamics simulations. In particular, we study the contact between a ruthenium surface with a single nanoasperity and a flat ruthenium surface. The results of such simulations suggest that contact behavior is highly variable. The goal of this study is to investigate the source and degree of this variability. We find that during compression, the behavior of the contact force displacement curves is reproducible, while during contact separation, the behavior is highly variable. Examination of the contact surfaces suggests that two separation mechanisms are in operation and give rise to this variability. One mechanism corresponds to the formation of a bridge between the two surfaces that plastically stretches as the surfaces are drawn apart and eventually separate in shear. This leads to a morphology after separation in which there are opposing asperities on the two surfaces. This plastic separation/bridge formation mechanism leads to a large work of separation. The other mechanism is a more brittle-like mode in which a crack propagates across the base of the asperity (slightly below the asperity/substrate junction) leading to most of the asperity on one surface or the other after separation and a slight depression facing this asperity on the opposing surface. This failure mode corresponds to a smaller work of separation. This failure mode corresponds to a smaller work of separation. Furthermore, contacts made from materials that exhibit predominantly brittle-like behavior will tend to require lower work of separation than those made from ductile-like contact materials.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Role of surface temperature in fluorocarbon plasma-surface interactions

This article examines plasma-surface reaction channels and the effect of surface temperature on the magnitude of those channels. Neutral species CF{sub 4}, C{sub 2}F{sub 6}, and C{sub 3}F{sub 8} are produced on surfaces. The magnitude of the production channel increases with surface temperature for all species, but favors higher mass species as the temperature is elevated. Additionally, the production rate of CF{sub 2} increases by a factor of 5 as the surface temperature is raised from 25 Degree-Sign C to 200 Degree-Sign C. Fluorine density, on the other hand, does not change as a function of either surface temperature or position outside of the plasma glow. This indicates that fluorine addition in the gas-phase is not a dominant reaction. Heating reactors can result in higher densities of depositing radical species, resulting in increased deposition rates on cooled substrates. Finally, the sticking probability of the depositing free radical species does not change as a function of surface temperature. Instead, the surface temperature acts together with an etchant species (possibly fluorine) to elevate desorption rates on that surface at temperatures lower than those required for unassisted thermal desorption.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Surface characterization of nanomaterials and nanoparticles: Important needs and challenging opportunities

This review examines characterization challenges inherently associated with understanding nanomaterials and the roles surface and interface characterization methods can play in meeting some of the challenges. In parts of the research community, there is growing recognition that studies and published reports on the properties and behaviors of nanomaterials often have reported inadequate or incomplete characterization. As a consequence, the true value of the data in these reports is, at best, uncertain. With the increasing importance of nanomaterials in fundamental research and technological applications, it is desirable that researchers from the wide variety of disciplines involved recognize the nature of these often unexpected challenges associated with reproducible synthesis and characterization of nanomaterials, including the difficulties of maintaining desired materials properties during handling and processing due to their dynamic nature. It is equally valuable for researchers to understand how characterization approaches (surface and otherwise) can help to minimize synthesis surprises and to determine how (and how quickly) materials and properties change in different environments. Appropriate application of traditional surface sensitive analysis methods (including x-ray photoelectron and Auger electron spectroscopies, scanning probe microscopy, and secondary ion mass spectroscopy) can provide information that helps address several of the analysis needs. In many circumstances, extensions of traditional data analysis can provide considerably more information than normally obtained from the data collected. Less common or evolving methods with surface selectivity (e.g., some variations of nuclear magnetic resonance, sum frequency generation, and low and medium energy ion scattering) can provide information about surfaces or interfaces in working environments (operando or in situ) or information not provided by more traditional methods. Although these methods may require instrumentation or expertise not generally available, they can be particularly useful in addressing specific questions, and examples of their use in nanomaterial research are presented.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Surface effects on the radiation response of nanoporous Au foams

We report on an experimental and simulation campaign aimed at exploring the radiation response of nanoporous Au (np-Au) foams. We find different defect accumulation behavior by varying radiation dose-rate in ion-irradiated np-Au foams. Stacking fault tetrahedra are formed when np-Au foams are irradiated at high dose-rate, but they do not seem to be formed in np-Au at low dose-rate irradiation. A model is proposed to explain the dose-rate dependent defect accumulation based on these results.

36 MATERIALS SCIENCE↗

Coexistence of epitaxial lattice rotation and twinning tilt induced by surface symmetry mismatch

Combined x-ray diffraction and first-principles studies of various epitaxial rutile-type metal dioxide films on Al{sub 2}O{sub 3}(0001) substrates reveal an unexpected rectangle-on-parallelogram heteroepitaxy. Unique matching of particular lattice spacings and crystal angles between the oxygen sublattices of Al{sub 2}O{sub 3}(0001) and the film(100) result in coexisted crystal rotation and lattice twinning inside the film. We demonstrate that, besides symmetry and lattice mismatch, angular mismatch along a specific crystal direction is also an important factor determining epitaxy. A generalized theorem has been proposed to explain epitaxial behaviors for tetragonal metal dioxides on Al{sub 2}O{sub 3}(0001).

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Towards high-energy and durable lithium-ion batteries via atomic layer deposition: elegantly atomic-scale material design and surface modification

Targeted at fueling future transportation and sustaining smart grids, lithium-ion batteries (LIBs) are undergoing intensive investigation for improved durability and energy density. Atomic layer deposition (ALD), enabling uniform and conformal nanofilms, has recently made possible many new advances for superior LIBs. The progress was summarized by Liu and Sun in their latest review [1], offering many insightful views, covering the design of nanostructured battery components (i.e., electrodes and solid electrolytes), and nanoscale modification of electrode/electrolyte interfaces. This work well informs peers of interesting research conducted and it will also further help boost the applications of ALD in next-generation LIBs and other advanced battery technologies.

Atomic Layer Deposition↗

Enhancement of effective linear RF surface resistance of superconducting surfaces by microscopic topography

Minimization of Radio-Frequency (RF) dissipation on superconducting surfaces is of interest for many applications. A prominent one is the use of Superconducting RF (SRF) cavities for charged particle acceleration. In addition to our previous investigation which characterized the occurrence of high-field non-linear losses by microscopic surface topography, the topic of increased linear losses as a function of surface topographic character merits consideration. Surfaces with isotropic homogeneous surface topography may be well characterized by power spectral density (PSD) derived from systematic height measurements. PSD characterizations of representative niobium cavity surface treatments have been developed: Electro-Polishing (EP), Nano-Mechanical Polishing (NMP) and Centrifugal Barrel Polishing (CBP) A perturbation model based on PSD statistical analysis is used to calculate additional RF loss on these surfaces when superconducting. The model assesses the penetration depth effects for a superconductor. We thus estimate the RF power dissipation ratio between these rough surfaces and an ideal smooth surface.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Observation of Surface-Bound Negatively Charged Hydride and Hydroxide on GaP(110) in H 2 O Environments

Surface-bound species on GaP(110) formed upon interaction with water were investigated through experiment and theory. These studies are motivated by and discussed in the context of electrocatalytic and photoelectrocatalytic schemes for solar fuel production, including especially observations of selective CO 2 reduction to methanol in acidified aqueous solutions of CO 2 and nitrogen-containing heteroaromatics. Experimentally, surface-bound species over ten orders of magnitude of pressure were spectroscopically identified in situ using synchrotron-based ambient pressure photoelectron spectroscopy (APPES). Ga 3d and O 1s core-level spectra indicate that the interaction of GaP(110) with H 2 O induces formation of a partially dissociated adlayer, characterized by the presence of both Ga-OH and molecular H 2 O species. Measurements of the P 2p core level indicate formation of a negatively charged hydride that irreversibly bonds to surface P in vacuum. The surface densities of the hydroxide and hydride species increase with increasing pressure (surface coverage) of water. Periodic slab calculations using density functional theory were used to study several relevant water configurations at 298 K on this surface. Consistent with earlier theoretical predictions at 0 K, the calculations confirm that Ga-OH, molecular H 2 O, and P-H species are thermodynamically stable on the GaP(110) surface under experimental conditions. Isobaric measurements at elevated pressures were used to probe the thermal stabilities of adsorbed species as well as the oxidation of surface Ga and P. The observation of stable surface hydride formation induced by interaction with water is especially notable given the critical role of hydride transfer to catalysts and CO 2 during chemical fuel synthesis reactions in aqueous environments. Furthermore, it is hypothesized that the observed high stability of the hydride on GaP may contribute to its associated remarkable near-100% faradaic efficiency for methanol generation by solar-driven CO 2 reduction in acidified aqueous pyridine solutions [J. Am. Chem. Soc. 2008, 130, 6342], because such stability is known to yield high overpotentials for the competing hydrogen evolution reaction.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Fractal Model for Drag Reduction on Multiscale Nonwetting Rough Surfaces

Rough surfaces in contact with a flow of fluid exhibit alternating no-slip and free shear boundary conditions at the solid–liquid and air–liquid interfaces, respectively, thereby potentially offering drag reduction benefits. The balance between the dynamic pressure in the flow and the restoring capillary pressure in the interasperity spaces determines the stability of the Cassie state of wettability and is a function of the relative extent of no-slip and free shear regions per unit surface area. In the present study, using a fractal representation of rough surface topography, an analytical model is developed to quantify the stability of the Cassie state of wettability as well as drag reduction and the friction factor for laminar flow in a rectangular channel between nonwetting multiscale rough surfaces. A systematic study is conducted to quantify the effects of fractal parameters of the surfaces and the flow Reynolds number on drag reduction and the friction factor. The studies are used to develop friction factor curves extending the classical Moody diagram to hydrophobic and superhydrophobic surfaces. On the basis of the studies, regime maps are derived for estimating the extent of drag reduction offered by hydrophobic and superhydrophobic surfaces, revealing that superhydrophobic surfaces do not always offer the best drag reduction performance. The application of the fractal model to practical topographies of nonwetting surfaces of copper, aluminum, and zinc oxide fabricated via electrodeposition and etching is also discussed.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Influence of surface potential on the adhesive force of radioactive gold surfaces

Radioactive particles may acquire surface potential through self-charging, and thus can behave differently from natural aerosols in atmospheric systems with respect to aggregation, deposition, resuspension, and transport to areas surrounding a radioactive source. Here, this work focuses on the adhesive force between radioactive particles and metallic surfaces, which relates to the deposition and resuspension of particles on surrounding surfaces. Scanning surface potential microscopy was employed to measure the surface potential of radioactive gold foil. Atomic force microscopy was used to investigate the adhesive force for gold that acquired surface charge either by irradiation or by application of an equivalent electrical bias. Overall, the adhesive force increases with increasing surface potential or relative humidity. However, a behavior that does not follow the general trend was observed for the irradiated gold at a high decay rate. A comparison between experimental measurements and calculated values revealed that the surface potential promotes adhesion. The contribution of the electrostatic force at high levels of relative humidity was lower than the one found using theoretical calculations due to the effects caused by enhanced adsorption rate of water molecules under a high surface charge density. Lastly, the results of this study can be used to provide a better understanding of the behavior of radioactive particles in atmospheric systems.

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗

Investigating Future Arctic Sea Ice Loss and Near–Surface Wind Speed Changes Related to Surface Roughness Using the Community Earth System Model

The Arctic is undergoing a pronounced and rapid transformation in response to changing greenhouse gasses, including reduction in sea ice extent and thickness. There are also projected increases in near-surface Arctic wind. This study addresses how the winds trends may be driven by changing surface roughness and/or stability in different Arctic regions and seasons, something that has not yet been thoroughly investigated. We analyze 50 experiments from the Community Earth System Model Version 2 (CESM2) Large Ensemble and five experiments using CESM2 with an artificially decreased sea ice roughness to match that of the open ocean. We find that with a smoother surface there are higher mean wind speeds and slower mean ice speeds in the autumn, winter, and spring. The artificially reduced surface roughness also strongly impacts the wind speed trends in autumn and winter, and we find that atmospheric stability changes are also important contributors to driving wind trends in both experiments. In contrast to the clear impacts on winds, the sea ice mean state and trends are statistically indistinguishable, suggesting that near-surface winds are not major drivers of Arctic sea ice loss. Two major results of this work are: (a) the near-surface wind trends are driven by changes in both surface roughness and near-surface atmospheric stability that are themselves changing from sea ice loss, and (b) the sea ice mean state and trends are driven by the overall warming trend due to increasing greenhouse gas emissions and not significantly impacted by coupled feedbacks with the surface winds.

54 ENVIRONMENTAL SCIENCES↗