Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “strong”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 271 records · Page 15
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

Chemical Analysis of Fluorobenzenes via Multinuclear Detection in the Strong Heteronuclear J-Coupling Regime

Chemical analysis via nuclear magnetic resonance (NMR) spectroscopy using permanent magnets, rather than superconducting magnets, is a rapidly developing field. Performing the NMR measurement in the strong heteronuclear J-coupling regime has shown considerable promise for the chemical analysis of small molecules. Typically, the condition for the strong heteronuclear J-coupling regime is satisfied at µT magnetic field strengths and enables high resolution J-coupled spectra (JCS) to be acquired. However, the JCS response to systematic chemical structural changes has largely not been investigated. In this report, we investigate the JCS of C6H6−xFx (x = 0, 1, 2, …, 6) fluorobenzene compounds via simultaneous excitation and detection of 19F and 1H at 51.5 µT. The results demonstrate that JCS are quantitative, and the common NMR observables, including Larmor frequency, heteronuclear and homonuclear J-couplings, relative signs of the J-coupling, chemical shift, and relaxation, are all measurable and are differentiable between molecules at low magnetic fields. The results, corroborated by ab initio calculations, provide new insights into the impact of chemical structure and their corresponding spin systems on JCS. In several instances, the JCS provided more chemical information than traditional high field NMR, demonstrating that JCS can be used for robust chemical analysis.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

A GPU Accelerated Mixed‐Precision Finite Difference Informed Random Walker (FDiRW) Solver for Strongly Inhomogeneous Diffusion Problems

In nature, many complex multi‐physics coupling problems exhibit significant diffusivity inhomogeneity, where one process occurs several orders of magnitude faster than others temporally. Simulating rapid diffusion alongside slower processes demands intensive computational resources due to the necessity for small time steps. To address these computational challenges, we have developed an efficient numerical solver named Finite Difference informed Random Walker (FDiRW). In this study, we propose a GPU‐accelerated, mixed‐precision configuration for the FDiRW solver to maximize efficiency through GPU multi‐threaded parallel computation and lower precision computation. Numerical evaluation results reveal that the proposed GPU‐accelerated mixed‐precision FDiRW solver can achieve a 117× speedup over the CPU baseline, while an additional 1.75× speedup is achieved by employing lower precision GPU computation. Notably, for large model sizes, the GPU‐accelerated mixed‐precision FDiRW solver demonstrates strong scaling with the number of nodes used in simulation. When simulating radionuclide absorption processes by porous wasteform particles with a medium‐sized model of 192 × 192 × 192, this approach reduces the total computational time to 10 min, enabling the simulation of larger systems with strongly inhomogeneous diffusivity.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2022

Embedded pairs for optimal explicit strong stability preserving Runge–Kutta methods

We construct a family of embedded pairs for optimal explicit strong stability preserving Runge–Kutta methods of order 2 ≤ p ≤ 4 to be used to obtain numerical solution of spatially discretized hyperbolic PDEs. In this construction, the goals include non-defective property, large stability region, and small error values as defined in Dekker and Verwer (1984) and Kennedy et al. (2000). The new family of embedded pairs offer the ability for strong stability preserving (SSP) methods to adapt by varying the step-size. Through several numerical experiments, we assess the overall effectiveness in terms of work versus precision while also taking into consideration accuracy and stability.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2024

A finite difference informed random walker (FDiRW) solver for strongly inhomogeneous diffusion problems

In nature, many complex multi-physics coupling problems exhibit strong diffusivity inhomogeneity. For instance, in the context of radionuclide absorption by porous wasteform materials within a flowing waste stream, the difference of species’ diffusivity in solid and liquid phases spans by 3~8 orders of magnitude. To solve the diffusion equations with strongly inhomogeneous diffusivity, traditional discretization-based methods, such as the Finite Difference Method (FDM), require infinitesimally small time steps (<10 -10 ) as high spatial resolutions are employed in most microstructure evolution processes, leading to prohibitively high computational costs. Here, this work developed an integrated numerical approach (FDiRW: Finite Difference informed Random Walk) to tackle this challenge. The idea is that utilizing the Random Walk concept, the fast diffusion is modeled as a superposition of point source’s solution for a concentration distribution while FDM is used to obtain the point source’s solution at each node. A mesh-coarsening algorithm is developed to generate an exclusive coarse mesh for FDiRW approach to maximize its efficiency. The effectiveness of the coarse mesh-based FDiRW approach is validated by benchmarking Finite Difference solutions. Numerical results demonstrated that FDiRW achieves a remarkable 1000x computational efficiency improvement over FDM while preserving desired accuracy for a medium-sized model of 192 × 192 × 192 grids. Finally, as models scale up, a floating-point operations (PLOPs) analysis of the FDiRW algorithm reveals that its computational complexity grows quadratically in terms of the number of nodes employed in computation.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Dynamically preferred state with strong electronic fluctuations from electrochemical synthesis of sodium manganate

Electrochemical (de)intercalation is a delicate method to precisely control the alkaline ion composition in alkaline transition metal oxides. Because of complicated interactions, metal charge ordering patterns can form spontaneously at special fractional alkaline compositions and orderings. In this study, we show that this elegant electrochemical process can create dynamically preferred structures in an anharmonic energy landscape that conventional syntheses and computations can rarely visit. Specifically, electrochemically prepared Na 1/2 MnO 2 ordering exhibits abnormal structure distortions, charge orderings, and dynamical activities. Strong magnetic fluctuations and lattice dynamics are observed in an unusually wide temperature range in Na 1/2 MnO 2 , which distinguishes it from all other Na x MnO 2 at higher or lower Na compositions. The results emphasize the unique opportunity of using electrochemical processes to design and create novel quantum states with strongly coupled and mutually enhanced electronic and lattice fluctuations, likely through a special dynamic charge flux functional, as suggested by our computational investigations.

25 ENERGY STORAGE↗
DOE OSTI2020

Strong coupling constant and quark masses from lattice QCD

In this paper, we review lattice determinations of the charm- and bottom-quark masses and the strong coupling constant obtained by different methods. We explain how effective field theory approaches, such as Non-Relativistic QCD (NRQCD), potential Non-Relativistic QCD (pNRQCD), Heavy Quark Effective Theory (HQET) and Heavy Meson rooted All- Staggered Chiral Perturbation Theory (HMrASχPT) can help in these determinations. After critically reviewing different lattice results we determine lattice world averages for the strong coupling constant, $α_s(M_Z, N_f=5) = 0.11803^{+0.00047}_{–0.00068}$, as well as for the charm-quark mass, $m_c(m_c, N_f=4) = 1.2735(35)$ GeV, and the bottom-quark mass, $m_b(m_b, N_f=5) = 4.188(10)$ GeV. The above

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2020

Strong Coupling in All-Dielectric Intersubband Polaritonic Metasurfaces

Mie-resonant dielectric metasurfaces are excellent candidates for both fundamental studies related to light–matter interactions and for numerous applications ranging from holography to sensing to nonlinear optics. To date, however, most applications using Mie metasurfaces utilize only weak light-matter interaction. Furthermore, we go beyond the weak coupling regime and demonstrate for the first time strong polaritonic coupling between Mie photonic modes and intersubband (ISB) transitions in semiconductor heterostructures. Furthermore, along with demonstrating ISB polaritons with Rabi splitting as large as 10%, we also demonstrate the ability to tailor the strength of strong coupling by engineering either the semiconductor heterostructure or the photonic mode of the resonators. Unlike previous plasmonic-based works, our new all-dielectric metasurface approach to generate ISB polaritons is free from ohmic losses and has high optical damage thresholds, thereby making it ideal for creating novel and compact mid-infrared light sources based on nonlinear optics.

42 ENGINEERING↗
DOE OSTI2022

Metal–Metal Oxide Catalytic Interface Formation and Structural Evolution: A Discovery of Strong Metal–Support Bonding, Ordered Intermetallics, and Single Atoms

In-depth investigation of metal–metal oxide interactions and their corresponding evolution is of paramount importance to heterogeneous catalysis as it allows the understanding and maneuvering of the structure of catalytic motifs. Herein, using a series of core/shell metal/iron oxide (M/FeO x , M = Pd, Pt, Au) nanoparticles and through a combination of in situ and ex situ electron and X-ray investigations, we revealed anomalous and dissimilar M–FeO x interactions among different systems under reducing conditions. Further, Pd interacts strongly with FeO x after high-temperature reductive treatment, featured by the formation of Pd single atoms in the FeO x matrix and increased Pd–Fe bonding, while Pt transforms into ordered PtFe intermetallics and Pt single atoms immediately upon the coating of FeO x . In contrast, Au does not manifest strong bonding with FeO x . As a proof of concept of tailoring metal–metal oxide interactions for catalysis, optimized Pd/FeO x demonstrates 100% conversion and 86.5% selectivity at 60 °C for acetylene semihydrogenation.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Benchmarking Density Functional Theory Methods for Efficient Calculations of a Strongly Correlated Li 1– x Ni 1– y O 2−δ System

Transition metal oxides (TMOs), such as LiNiO 2 , are promising candidates for energy storage and electronic devices due to their unique electronic properties, exceptional physical and chemical characteristics, and ability to adopt multiple oxidation states. However, accurately predicting their properties using mean-field density functional theory (DFT) is challenging due to the presence of strongly correlated d-electrons and the complex interplay between their structural, electronic, and magnetic responses. These challenges are further exacerbated by the need to model defects, surfaces, and interfaces, which require computationally efficient, large-scale simulations. To address these issues, we carry out a benchmark study on the Li 1–x NiO 2 system, evaluating the performance of several popular functionals. Our findings demonstrate that combining SCAN functional relaxation with single-step HSE calculations provides a practical and scalable computational strategy. This approach balances accuracy and efficiency, enabling high-throughput simulations of strongly correlated TMOs and improved predictive modeling capability of TMOs for practical applications.

25 ENERGY STORAGE↗
DOE OSTI2021

In Situ Strong Metal–Support Interaction (SMSI) Affects Catalytic Alcohol Conversion

Strong metal–support interactions (SMSIs) and catalyst deactivation have been heavily researched for decades by the catalysis community. The promotion of SMSIs in supported metal oxides is commonly associated with H 2 treatment at high temperature (>500 °C), and catalyst deactivation is commonly attributed to sintering, leaching of the active metal, and overoxidation of the metal, as well as strong adsorption of reaction intermediates. Alcohols can reduce metal oxides, and thus here we have hypothesized that catalytic conversion of alcohols can promote SMSIs in situ . In this work we show, via IR spectroscopy of CO adsorption and electron energy loss spectroscopy (EELS), that during 2-propanol conversion over Pd/TiO 2 coverage of Pd sites occurs due to SMSIs at low reaction temperatures (as low as ~ 190 °C). The emergence of SMSIs during the reaction ( in situ ) explains the apparent catalyst deactivation when the reaction temperature is varied. A steady-state isotopic transient kinetic analysis (SSITKA) shows that the intrinsic reactivity of the catalytic sites does not change with temperature when SMSI is promoted in situ ; rather, the number of available active sites changes (when a TiO x layer migrates over Pd NPs). SMSI generated during the reaction fully reverses upon exposure to O 2 at room temperature for ~15 h, which may have made their identification elusive up to now.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Controlled site coverage of strong metal–support interaction (SMSI) on Pd NP catalysts

Here, strong metal–support interaction catalysts have been shown to improve desired product selectivity at the cost of fractional rates due to active site coverage. The goal of this study was to determine if the active site coverage of metallic nanoparticles could be controlled to lower levels than have been previously reported in SMSI catalysts with the aim of improving the rate while maintaining high selectivity. 2Pd–XTi/SiO 2 (2 wt% Pd, X wt% Ti) strong metal–support interaction (SMSI) catalysts with Ti loadings between 0–1.0 wt% were synthesized to control Pd nanoparticle coverage. Calcination at 450 °C and reduction at 550 °C were sufficient for forming ~2 nm sized Pd particles in all catalysts. Increasing the Ti loading from 0.1 to 1.0 wt% increased the surface coverage from 40 to 85% at a fixed reduction temperature of 550 °C. The IR spectra of the SMSI catalysts were similar with a high fraction of linear bonded CO which was much higher than that of Pd nanoparticles of similar size. The SMSI overlayer could be removed by oxidation at 350 °C and re-reduction at 200 °C. EXAFS of the oxidized catalysts indicates that nearly full oxidation of the metallic nanoparticle was required to remove the SMSI overlayer. Oxidation temperatures from 30 to 300 °C partially oxidized the Pd nanoparticles and subsequent re-reduction at 200 °C partially decreases the SMSI coverage. The fractional surface coverage was determined by measuring the rate of propylene hydrogenation with and without the SMSI overlayer. Increasing the reduction temperature from 200 to 550 °C increased the SMSI coverage from 0 to 85% depending on the Ti loading and temperature. In conclusion, after reduction at 550 °C and oxidation at 350 °C, the range of coverages varied between ~10% with 0.1 wt% Ti after re-reduction at 300 °C and ~85% with 1 wt% Ti after reduction at 550 °C.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Strongly correlated and topological states in [111] grown transition metal oxide thin films and heterostructures

We highlight recent advances in the theory, materials fabrication, and experimental characterization of strongly correlated and topological states in [111] oriented transition metal oxide thin films and heterostructures, which are notoriously difficult to realize compared to their [001] oriented counterparts. We focus on two classes of complex oxides, with the chemical formulas ABO 3 and A 2 B 2 O 7 , where the B sites are occupied by an open-shell transition metal ion with a local moment and the A sites are typically a rare earth element. The [111] oriented quasi-two-dimensional lattices derived from these parent compound lattices can exhibit peculiar geometries and symmetries, namely, a buckled honeycomb lattice, as well as kagome and triangular lattices. These lattice motifs form the basis for emergent strongly correlated and topological states expressed in exotic magnetism, various forms of orbital ordering, topological insulators, topological semimetals, quantum anomalous Hall insulators, and quantum spin liquids. For transition metal ions with high atomic number, spin–orbit coupling plays a significant role and may give rise to additional topological features in the electronic band structure and in the spectrum of magnetic excitations. We conclude this perspective by articulating open challenges and opportunities in this actively developing field.

36 MATERIALS SCIENCE↗
DOE OSTI2024

The strong coupling constant: state of the art and the decade ahead

Theoretical predictions for particle production cross sections and decays at colliders rely heavily on perturbative Quantum Chromodynamics (QCD) calculations, expressed as an expansion in powers of the strong coupling constant α$_{S}$. The current O(1%)uncertainty of the QCD coupling evaluated at the reference Z boson mass, αS(mZ2)=0.1179±0.0009, is one of the limiting factors to more precisely describe multiple processes at current and future colliders. A reduction of this uncertainty is thus a prerequisite to perform precision tests of the Standard Model as well as searches for new physics. This report provides a comprehensive summary of the state-of-the-art, challenges, and prospects in the experimental and theoretical study of the strong coupling. The current αS(mZ2)world average is derived from a combination of seven categories of observables: (i) lattice QCD, (ii) hadronic τ decays, (iii) deep-inelastic scattering and parton distribution functions fits, (iv) electroweak boson decays, hadronic final-states in (v) e$^{+}$e$^{−}$, (vi) e–p, and (vii) p–p collisions, and (viii) quarkonia decays and masses. We review the current status of each of these seven αS(mZ2)extraction methods, discuss novel α$_{S}$ determinations, and examine the averaging method used to obtain the world-average value. Each of the methods discussed provides a ‘wish list’ of experimental and theoretical developments required in order to achieve the goal of a per-mille precision on αS(mZ2)within the next decade.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2021

Single particle detection system for strong-field QED experiments

Abstract Measuring signatures of strong-field quantum electrodynamics (SF-QED) processes in an intense laser field is an experimental challenge: it requires detectors to be highly sensitive to single electrons and positrons in the presence of the typically very strong x-ray and γ -photon background levels. In this paper, we describe a particle detector capable of diagnosing single leptons from SF-QED interactions and discuss the background level simulations for the upcoming Experiment-320 at FACET-II (SLAC National Accelerator Laboratory). The single particle detection system described here combines pixelated scintillation LYSO screens and a Cherenkov calorimeter. We detail the performance of the system using simulations and a calibration of the Cherenkov detector at the ELBE accelerator. Single 3 GeV leptons are expected to produce approximately 537 detectable photons in a single calorimeter channel. This signal is compared to Monte-Carlo simulations of the experiment. A signal-to-noise ratio of 18 in a single Cherenkov calorimeter detector is expected and a spectral resolution of 2% is achieved using the pixelated LYSO screens.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2022

PICSAR-QED: a Monte Carlo module to simulate strong-field quantum electrodynamics in particle-in-cell codes for exascale architectures

Abstract Physical scenarios where the electromagnetic fields are so strong that quantum electrodynamics (QED) plays a substantial role are one of the frontiers of contemporary plasma physics research. Investigating those scenarios requires state-of-the-art particle-in-cell (PIC) codes able to run on top high-performance computing (HPC) machines and, at the same time, able to simulate strong-field QED processes. This work presents the PICSAR-QED library, an open-source, portable implementation of a Monte Carlo module designed to provide modern PIC codes with the capability to simulate such processes, and optimized for HPC. Detailed tests and benchmarks are carried out to validate the physical models in PICSAR-QED, to study how numerical parameters affect such models, and to demonstrate its capability to run on different architectures (CPUs and GPUs). Its integration with WarpX, a state-of-the-art PIC code designed to deliver scalable performance on upcoming exascale supercomputers, is also discussed and validated against results from the existing literature.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2026

Intrinsic nonlocality of spin- and polarization-resolved probabilities in strong-field quantum electrodynamics

Spin and polarization are central to precision tests of fundamental physics and for interpreting radiation from astrophysical sources and ultraintense laser-matter experiments. Here, focusing on the fundamental process of nonlinear Compton scattering, we demonstrate that a key assumption underlying current strong-field quantum electrodynamics models, i.e., that emission can be treated as an instantaneous random event sampled from a local differential rate, is inconsistent once emission angles, electron spin, and/or photon polarization are resolved. Namely, even in strictly constant and uniform fields , the resulting fully differential distribution is sign indefinite, yielding negative inferred probabilities. The physical reason is that the photon emission probability builds up over a finite length of the electron trajectory, the formation region, during which the electron direction changes by roughly the same small angle that defines the radiation cone. Therefore, we put forward a new method where we integrate over this formation region analytically to obtain a physically consistent electron spin and photon polarization model. We show that the implementation of our model is compatible with existing Monte Carlo and particle-in-cell workflows. Simulations of a GeV-class electron-laser collision accessible at current petawatt facilities and of emission in a pulsarlike magnetic field are shown to reveal spin and polarization patterns that differ even qualitatively from state-of-the-art local models. In particular, our new model predicts substantial angle-dependent circular photon polarization where the well-known collinear-emission approach yields none, and a pronounced helicity bias in the recoiling electrons absent from current predictions. These findings have direct implications for upcoming strong-field QED experiments and for interpreting polarized radiation from extreme astrophysical environments.

astrophysical electromagnetic fields↗
DOE OSTI2021

Strong-field ionization of the triplet ground state of O 2

Using strong-field ionization as a probe, we observe highly nonperiodic evolution of the spin-rotation wave packet launched by a nonionizing femtosecond pulse in oxygen. The nonperiodicity is readily apparent only in rotationally cold molecules that are pumped with a weak alignment pulse. We show that this behavior is a consequence of the spin-rotation and the spin-spin couplings in the triplet ground state of the neutral molecule. A model that includes these couplings in the field-free Hamiltonian but in neither the alignment nor the ionization step explains most of the observed dynamics, suggesting that neither process depends explicitly on the electronic spin. We also show that the angle dependence of strong-field ionization can be retrieved from the delay-dependent signal even when coupling to spin complicates the rotational dynamics.

74 ATOMIC AND MOLECULAR PHYSICS↗
DOE OSTI2023

Strong-field nonsequential double photoionization using virtual-detector theory with path summation

We present an ab initio study of the nonsequential strong-field ionization dynamics of a model two-electron atom with helium character. Single- and double-ionization events are characterized and displayed using detector signals extracted at different points in the two-electron two-dimensional space. The double photoelectron momentum distribution is calculated via coherent path-summation over virtual-particle trajectories. A comparison is made between the momentum distributions obtained with the virtual-detector method, the Schrödinger wave function, and the time-dependent surface flux method developed by Tao and Scrinzi [New J. Phys. 14, 013021 (2012)]. Insights into different ionization and electron recollision pathways are gained from detailed virtual-particle tracking and energy-time readouts. Furthermore, this study demonstrates the extension of virtual-detector theory to strong-field multielectron quantum dynamics and highlights the importance of the evolving quantum phase in quasiclassical electron propagation.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗