Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “standard”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 271 records · Page 15

An Evaluation of Standardized Canisters in the Waste Management System - 16317

Development of a standardized canister system represents an opportunity to develop an integrated approach to addressing storage, transportation, and disposal issues in the waste management system. However, regardless of timing and method, deployment of such a system would have the potential to cause significant system-wide impacts. This evaluation expands upon previous standardized-canister system evaluations and compares continued loading of dual-purpose canisters (i.e., the status quo) with loading of standardized canister systems in the near term, that is, before repository requirements are known and/or before operating reactors shut down. This evaluation quantitatively compares order-of-magnitude costs and logistics for different standardization scenarios with those of status quo scenarios, provides insight into quantifiable impacts of loading standardized canister systems in the near term, tests system-level analysis tools and associated input, and identifies scenarios for further analysis. This is a technical paper that does not take into account the contractual limitations under the Standard Contract (10 CFR Part 961). As work on assessing standardized canister system scenarios has progressed, new data for at-reactor and interim storage facility (ISF) operations have been collected and/or generated to provide more realism at the system level, and past scenarios were re-evaluated with this new information. In addition, new scenarios were developed and analyzed that focused on (1) bare fuel transported from reactors to an ISF in re-usable bare fuel casks and deferring deployment of a standardized canister system to the ISF, (2) alternative acceptance strategies based on conclusions from previous systems architecture studies, and (3) the impacts of having to accommodate spent fuel in differently sized canisters for different potential repository geologies. Results of this evaluation indicate that shifting the loading of standardized canisters from the reactor to the ISF does not result in a significant change in total system cost. Results also show that some alternative acceptance strategies could reduce the number of years that spent nuclear fuel (SNF) stays on-site at reactors for cases involving standardized canisters (consistent with previous results that looked at dual-purpose canisters). Finally, incorporating the new at-reactor loading data of small standardized canisters shows a significant system-wide cost reduction when compared to previous estimates of at-reactor loading of small canisters. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

A perspective on the interaction between the NCSD and ANSI/ANS-8 standards

The intent of this paper is to illuminate the reasons behind the culture of standards involvement by the criticality safety community in the NCSD (Nuclear Criticality Safety Division), and specifically highlight those NCSD activities that build/support this culture. Many NCSD members are currently active in ANSI/ANS-8 and other standards and have been for the last half century. This paper was inspired by a request from ANS's Professional Divisions Committee concerning how the professional divisions could 'increase support to Standards development as Subject Matter Experts'. The healthy level of involvement (i.e., culture) by the NCSD membership in standards was noted. A history of the ANSI/ANS-8 series standards is provided, with roots going back to 1955. The need became apparent during a cluster of nuclear criticality accidents that occurred between 1958-1962. The first NCS related standard was the American Standard N6.1-1964, the parent of ANSI/ANS-8.1, which was prepared in 1958 and adopted in 1964. Thus, the involvement in standards by the NCS community goes back more than 50 years. The NCSD continues to help foster a culture of standards use and development. However, the support provided by the NCSD is frequently not recognized, and standards activities are often viewed as separate from the NCSD. This paper highlights the interaction between the NCSD and the ANSI/ANS-8 standards activities as well as the benefit of this support. (authors)

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Development of a Standard for Verification and Validation of Software Used to Calculate Nuclear System Thermal Fluids Behavior

With the resurgence of nuclear power and increased interest in advanced nuclear reactors as an option to supply abundant energy without the associated greenhouse gas emissions of the more conventional fossil fuel energy sources, there is a need to establish internationally recognized standards for the verification and validation (V&V) of software used to calculate the thermal-hydraulic behavior of advanced reactor designs for both normal operation and hypothetical accident conditions. To address this need, ASME (American Society of Mechanical Engineers) Standards and Certification has established the V&V 30 Committee, under the responsibility of the V&V Standards Committee, to develop a consensus Standard for verification and validation of software used for design and analysis of advanced reactor systems. The initial focus of this committee will be on the V&V of system analysis and computational fluid dynamics (CFD) software for nuclear applications. To limit the scope of the effort, the committee will further limit its focus to software to be used in the licensing of High-Temperature Gas-Cooled Reactors. In this framework, the standard should conform to Nuclear Regulatory Commission (NRC) practices, procedures and methods for licensing of nuclear power plants as embodied in the United States (U.S.) Code of Federal Regulations and other pertinent documents such as Regulatory Guide 1.203, “Transient and Accident Analysis Methods” and NUREG-0800, “NRC Standard Review Plan”. In addition, the standard should be consistent with applicable sections of ASME Standard NQA-1 (“Quality Assurance Requirements for Nuclear Facility Applications (QA)”). This paper describes the general requirements for the V&V Standard, which includes; (a) the definition of the operational and accident domain of a nuclear system that must be considered if the system is to licensed, (b) the corresponding calculational domain of the software that should encompass the nuclear operational and accident domain to be used to study the system behavior for licensing purposes, (c) the definition of the scaled experimental data set required to provide the basis for validating the software, (d) the ensemble of experimental data sets required to populate the validation matrix for the software in question, and (e) the practices and procedures to be used when applying a validation standard. Although this initial effort will focus on software for licensing of High-Temperature Gas Reactors, it is anticipated that the practices and procedures developed for this standard can eventually be extended to other nuclear and non-nuclear applications.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Evaluation of the 235 U resonance parameters to fit the standard recommended values

A great deal of effort has been dedicated to the revision of the standard values in connection with the neutron interaction for some actinides. While standard data compilation are available for decades nuclear data evaluations included in existing nuclear data libraries (ENDF, JEFF, JENDL, etc.) do not follow the standard recommended values. Indeed, the majority of evaluations for major actinides do not conform to the standards whatsoever. In particular, for the n + 235 U interaction the only value in agreement with the standard is the thermal fission cross section. We performed a resonance re-evaluation of the n + 235 U interaction in order to address the issues regarding standard values in the energy range from 10-5 eV to 2250 eV. Recently, 235 U fission cross-section measurements have been performed at the CERN Neutron Time-o-Flight facility (TOF), known as n_TOF, in the energy range from 0.7 eV to 10 keV. The data were normalized according to the recommended standard of the fission integral in the energy range 7.8 eV to 11 eV. As a result, the n_TOF averaged fission cross sections above 100 eV are in good agreement with the standard recommended values. The n_TOF data were included in the 235 U resonance analysis that was performed with the code SAMMY. In addition to the average standard values related to the fission cross section, standard thermal values for fission, capture, and elastic cross sections were also included in the evaluation. Our paper presents the procedure used for re-evaluating the 235 U resonance parameters including the recommended standard values as well as new cross section measurements.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Measuring the activity of BioBrick promoters using an in vivo reference standard

The engineering of many-component, synthetic biological systems is being made easier by the development of collections of reusable, standard biological parts. However, the complexity of biology makes it difficult to predict the extent to which such efforts will succeed. As a first practical example, the Registry of Standard Biological Parts started at MIT now maintains and distributes thousands of BioBrick™ standard biological parts. However, BioBrick parts are only standardized in terms of how individual parts are physically assembled into multi-component systems, and most parts remain uncharacterized. Standardized tools, techniques, and units of measurement are needed to facilitate the characterization and reuse of parts by independent researchers across many laboratories. We found that the absolute activity of BioBrick promoters varies across experimental conditions and measurement instruments. We choose one promoter (BBa_J23101) to serve as an in vivo reference standard for promoter activity. We demonstrated that, by measuring the activity of promoters relative to BBa_J23101, we could reduce variation in reported promoter activity due to differences in test conditions and measurement instruments by ~50%. We defined a Relative Promoter Unit (RPU) in order to report promoter characterization data in compatible units and developed a measurement kit so that researchers might more easily adopt RPU as a standard unit for reporting promoter activity. We distributed a set of test promoters to multiple labs and found good agreement in the reported relative activities of promoters so measured. We also characterized the relative activities of a reference collection of BioBrick promoters in order to further support adoption of RPU-based measurement standards. Relative activity measurements based on an in vivoreference standard enables improved measurement of promoter activity given variation in measurement conditions and instruments. Furthermore, these improvements are sufficient to begin to support the measurement of promoter activities across many laboratories. Additional in vivo reference standards for other types of biological functions would seem likely to have similar utility, and could thus improve research on the design, production, and reuse of standard biological parts.

59 BASIC BIOLOGICAL SCIENCES↗

National Cost-effectiveness of ANSI/ASHRAE/IES Standard 90.1-2013

The U.S. Department of Energy (DOE) Building Energy Codes Program supports the upgrade and implementation of building energy codes and standards, which set minimum requirements for energy-efficient design and construction for new and renovated buildings, and impact energy use and greenhouse gas emissions for the life of buildings. Continuous improvement of building energy efficiency is achieved by periodically updating model energy codes for commercial and residential buildings. Through consensus-based code development processes, DOE recommends revisions and amendments, supporting technologically feasible and economically justified energy efficiency measures. Ensuring that model code changes impacting the cost of building construction, maintenance, and energy services are cost-effective also encourages their adoption and implementation at the state and local levels. Pacific Northwest National Laboratory (PNNL) prepared this analysis to support DOE in evaluating the energy and economic impacts associated with updated codes in commercial buildings. The purpose of this analysis is to examine the cost-effectiveness of the 2013 edition of ANSI/ASHRAE/IES Standard 90.1 (ANSI/ASHRAE/IES 2013). Standard 90.1 is developed by the American Society of Heating, Refrigerating and Air-Conditioning Engineers (ASHRAE) Standard Standing Project Committee (SSPC) 90.1. It is the model energy standard for commercial and multifamily residential buildings over three floors (42 USC 6833). PNNL analyzed the cost-effectiveness of changes in Standard 90.1 from 90.1-2010 to 90.1-2013, as applied in commercial buildings across the United States. During the development of new editions of Standard 90.1, the cost-effectiveness of individual changes (addenda) is often calculated to support the deliberations of ASHRAE Standard Standing Project Committee (SSPC) 90.1. The ASHRAE process, however, does not include analysis of the cost-effectiveness of the entire package of addenda from one edition of the standard to the next, which is of particular interest to adopting State and local governments. Providing States with an analysis of costeffectiveness may encourage more rapid adoption of newer editions of energy codes based on Standard 90.1. This information may also inform the development of future editions of Standard 90.1.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

Energy and Economic Impacts of U.S. Federal Energy and Water Conservation Standards Adopted From 1987 Through 2011

This paper presents estimates of the key impacts of Federal energy and water conservation standards adopted from 1987 through 2011. The standards for consumer products and commercial and industrial equipment include those set by legislation as well as standards adopted by DOE through rulemaking. In 2011, the standards saved an estimated 3.2 quads of primary energy, which is equivalent to 3% of total U.S. energy consumption. The savings in operating costs for households and businesses totaled $\$ $42 billion. The average household saved $\$ $309 in operating costs as a result of residential and plumbing product standards. The estimated reduction in CO 2 emissions associated with the standards in 2011 was 176 million metric tons , which is equivalent to 3 percent of total U.S. CO 2 emissions. The estimated cumulative energy savings over the period 1990-2070 amount to 176 quads. Accounting for the increased upfront costs of more-efficient products and the operating cost (energy and water) savings over the products’ lifetime, the standards have a projected cumulative net present value (NPV) of consumer benefit of between $\$ $938 billion and $\$ $1,279 billion, using 7 percent and 3 percent discount rates, respectively. The water conservation standards, together with energy conservation standards that also save water, reduced water use by 1.5 trillion gallons in 2010, and will achieve cumulative water savings by 2040 of 51.4 trillion gallons. The estimated consumer savings in 2010 from reduced water use amounted to $\$ $10.8 billon. Standards set by legislation account for 47 percent of total cumulative primary energy savings and 55 to 66 percent of the total cumulative NPV (depending on which discount rate is used). Standards set by DOE rulemakings account for 53 percent of total cumulative primary energy savings and 34 to 45 percent of the total cumulative NPV.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗

Use of human engineering standards in design

Results are presented for a research study intended to assess the impact of present human engineering standards on product design. The approach consisted of three basic steps: a comparison of two display panels to determine if, in fact, products designed to the same standards are truly standardized; a review of two existing standards to determine how well their information can be used to solve design problems; and a survey of human factors specialists to assess their opinions about standards. It is shown that standards have less than the desired influence on product design. This is evidenced by a lack of standardization between hardware designed under common standards, by deficiencies within the standards that detract from their usefulness and encourage users to ignore them, and by the respondents of the survey who consider standards less valuable than other reference sources for design implementation. Recommendations aimed at enhancing the use of standards are set forth.

Rogers, J. G.↗

Development of NASA Technical Standards Program Relative to Enhancing Engineering Capabilities

The enhancement of engineering capabilities is an important aspect of any organization; especially those engaged in aerospace development activities. Technical Standards are one of the key elements of this endeavor. The NASA Technical Standards Program was formed in 1997 in response to the NASA Administrator s directive to develop an Agencywide Technical Standards Program. The Program s principal objective involved the converting Center-unique technical standards into Agency wide standards and the adoption/endorsement of non-Government technical standards in lieu of government standards. In the process of these actions, the potential for further enhancement of the Agency s engineering capabilities was noted relative to value of being able to access Agencywide the necessary full-text technical standards, standards update notifications, and integration of lessons learned with technical standards, all available to the user from one Website. This was accomplished and is now being enhanced based on feedbacks from the Agency's engineering staff and supporting contractors. This paper addresses the development experiences with the NASA Technical Standards Program and the enhancement of the Agency's engineering capabilities provided by the Program s products. Metrics are provided on significant aspects of the Program.

Gill, Paul S.↗

Test Standard Developed for Determining the Slow Crack Growth of Advanced Ceramics at Ambient Temperature

The service life of structural ceramic components is often limited by the process of slow crack growth. Therefore, it is important to develop an appropriate testing methodology for accurately determining the slow crack growth design parameters necessary for component life prediction. In addition, an appropriate test methodology can be used to determine the influences of component processing variables and composition on the slow crack growth and strength behavior of newly developed materials, thus allowing the component process to be tailored and optimized to specific needs. At the NASA Lewis Research Center, work to develop a standard test method to determine the slow crack growth parameters of advanced ceramics was initiated by the authors in early 1994 in the C 28 (Advanced Ceramics) committee of the American Society for Testing and Materials (ASTM). After about 2 years of required balloting, the draft written by the authors was approved and established as a new ASTM test standard: ASTM C 1368-97, Standard Test Method for Determination of Slow Crack Growth Parameters of Advanced Ceramics by Constant Stress-Rate Flexural Testing at Ambient Temperature. Briefly, the test method uses constant stress-rate testing to determine strengths as a function of stress rate at ambient temperature. Strengths are measured in a routine manner at four or more stress rates by applying constant displacement or loading rates. The slow crack growth parameters required for design are then estimated from a relationship between strength and stress rate. This new standard will be published in the Annual Book of ASTM Standards, Vol. 15.01, in 1998. Currently, a companion draft ASTM standard for determination of the slow crack growth parameters of advanced ceramics at elevated temperatures is being prepared by the authors and will be presented to the committee by the middle of 1998. Consequently, Lewis will maintain an active leadership role in advanced ceramics standardization within ASTM. In addition, the authors have been and are involved with several international standardization organizations including the Versailles Project on Advanced Materials and Standards (VAMAS), the International Energy Agency (IEA), and the International Organization for Standardization (ISO). The associated standardization activities involve fracture toughness, strength, elastic modulus, and the machining of advanced ceramics.

Choi, Sung R.↗

Application of IRIG 106 Digital Data Recorder Standards for Flight Test

During flight tests, data is acquired from different sources and in different formats. Sensor data, aircraft avionics bus data, time, voice and video are essential for analysis of these flight tests. IRIG 106 standards exist for recording and transferring these data types. However, to enhance interoperability of flight test data between (multinational) test teams, a standard was needed to encapsulate all these data types. For this purpose the Telemetry Group of the Range Commanders Council (RCC) first published in 2004 the IRIG 106 Chapter 10 Standard, “Solid-State On-Board Recorder Standard”. This standard is evolving up to present. This AGARDograph gives an introduction to the standard, explains how the standard is positioned among other relevant standards, and describes the equipment and their application in flight tests with some examples. The topics covered include IRIG 106 Chapter 10 compatible recording of (multiple) data streams, synchronization of data, data recorders, data retrieval, data processing, and examples of flight test programs. Further development of the standard, originally published for on-board recorders, is described for extending the requirements for ground-based data recorders. The last chapter addresses a number of issues related to the application of the Chapter 10 standard with references to information and possible solutions. This document shows how data acquisition and data processing in accordance to IRIG 106 Chapter 10 standard can be applied in NATO flight tests and will thereby contribute to collaboration and cost efficiency.

flight test instrumentation↗

Holistic and Pragmatic Standards Processes Enable Interdisciplinary Science

Open, interdisciplinary science inevitably relies heavily on standards. Standards are those often unseen agreements that we take for granted when systems and processes are working fine. Yet standards work is perpetual, laborious, and sometimes contentious, especially for standards to work across diverse disciplines. Standards development, maintenance, and implementation is a complex, ongoing socio-technical process. NASA has developed a progressively open science policy and strategy that calls for the establishment of a data standards process reaching across the five diverse divisions of the Science Mission Directorate. This is a delicate exercise. We, therefore, seek to apply a holistic yet pragmatic approach to developing and maintaining a standards process. We adopt an ecological philosophy that focuses on the interactions within the data ecosystem and how standards facilitate those interactions. We couple high-level analysis with on the ground experimentation. We began by 1) mapping information ecosystem components (e.g. data centers, missions, services, protocols, users), 2)establishing how the components interact (e.g. sharing (meta)data, funding, personnel exchange), and 3) modelling system dynamics (e.g. creation of products from multiple data centers, redundant processes, shared services). The goal is to apply understanding of the ecosystem to real world applications (e.g. planning a new mission, implementing new policy requirements, improving process efficiency, etc.). We have also conducted studies of historical standardization efforts, documenting lessons learned and cautionary tales. We then contrast this more abstract work with real examples. We reviewed and assessed multiple existing standards development processes both within and external to NASA. We now work to implement an initial test process which can be further optimized. We seek to define a consistent approach for assigning persistent identifiers for research objects, especially for the purposes of citation. The experience from this relatively ‘simple’ test case adds a pragmatic perspective on how researchers and engineers actually work. This presentation will review the details of this methodology, our initial findings, and how they might apply to other interdisciplinary standardization efforts.

Mark A Parsons↗

Data File Standard for Flow Cytometry, Version FCS 3.1

The flow cytometry data file standard provides the specifications needed to completely describe flow cytometry data sets within the confines of the file containing the experimental data. In 1984, the first Flow Cytometry Standard format for data files was adopted as FCS 1.0. This standard was modified in 1990 as FCS 2.0 and again in 1997 as FCS 3.0. We report here on the next generation flow cytometry standard data file format. FCS 3.1 is a minor revision based on suggested improvements from the community. The unchanged goal of the standard is to provide a uniform file format that allows files created by one type of acquisition hardware and software to be analyzed by any other type. The FCS 3.1 standard retains the basic FCS file structure and most features of previous versions of the standard. Changes included in FCS 3.1 address potential ambiguities in the previous versions and provide a more robust standard. The major changes include simplified support for international characters and improved support for storing compensation. The major additions are support for preferred display scale, a standardized way of capturing the sample volume, information about originality of the data file, and support for plate and well identification in high throughput, plate based experiments. Please see the normative version of the FCS 3.1 specification in Supporting Information for this manuscript (or at http://www.isac-net.org/ in the Current standards section) for a complete list of changes.

59 BASIC BIOLOGICAL SCIENCES↗

WE-G-BRD-07: Automated MR Image Standardization and Auto-Contouring Strategy for MRI-Based Adaptive Brachytherapy for Cervix Cancer

Purpose: MRI-based adaptive brachytherapy (ABT) is an emerging treatment modality for patients with gynecological tumors. However, MR image intensity non-uniformities (IINU) can vary from fraction to fraction, complicating image interpretation and auto-contouring accuracy. We demonstrate here an automated MR image standardization and auto-contouring strategy for MRI-based ABT of cervix cancer. Methods: MR image standardization consisted of: 1) IINU correction using the MNI N3 algorithm, 2) noise filtering using anisotropic diffusion, and 3) signal intensity normalization using the volumetric median. This post-processing chain was implemented as a series of custom Matlab and Java extensions in MIM (v6.4.5, MIM Software) and was applied to 3D T2 SPACE images of six patients undergoing MRI-based ABT at 3T. Coefficients of variation (CV=σ/µ) were calculated for both original and standardized images and compared using Mann-Whitney tests. Patient-specific cumulative MR atlases of bladder, rectum, and sigmoid contours were constructed throughout ABT, using original and standardized MR images from all previous ABT fractions. Auto-contouring was performed in MIM two ways: 1) best-match of one atlas image to the daily MR image, 2) multi-match of all previous fraction atlas images to the daily MR image. Dice’s Similarity Coefficients (DSCs) were calculated for auto-generated contours relative to reference contours for both original and standardized MR images and compared using Mann-Whitney tests. Results: Significant improvements in CV were detected following MR image standardization (p=0.0043), demonstrating an improvement in MR image uniformity. DSCs consistently increased for auto-contoured bladder, rectum, and sigmoid following MR image standardization, with the highest DSCs detected when the combination of MR image standardization and multi-match cumulative atlas-based auto-contouring was utilized. Conclusion: MR image standardization significantly improves MR image uniformity. The combination of MR image standardization and multi-match cumulative atlas-based auto-contouring produced the highest DSCs and is a promising strategy for MRI-based ABT for cervix cancer.

60 APPLIED LIFE SCIENCES↗

Realized and Projected Impacts of U.S. Energy Efficiency Standards for Residential and Commercial Appliances

This study estimated energy, environmental and consumer economic impacts of U.S. Federal residential energy efficiency standards that became effective in the 1988-2006 period, and of energy efficiency standards for fluorescent lamp ballasts and distribution transformers. These standards have been the subject of in-depth analyses conducted as part of DOE's standards rulemaking process. This study drew on those analyses, but updated certain data and developed a common framework and assumptions for all of the products in order to estimate realized impacts and to update projected impacts. It also performed new analysis for the first (1990) fluorescent ballast standards, which had been introduced in the NAECA legislation without a rulemaking. We estimate that the considered standards will reduce residential/ commercial primary energy consumption and carbon dioxide emissions in 2030 by 4percent compared to the levels expected without any standards. The reduction for the residential sector is larger, at 8percent. The estimated cumulative energy savings from the standards amount to 39 quads by 2020, and 63 quads by 2030. The standards will also reduce emissions of carbon dioxide by considerable amounts.The estimated cumulative net present value of consumer benefit amounts to $241 billion by 2030, and grows to $269 billion by 2045. The overall ratio of consumer benefits to costs (in present value terms) in the 1987-2050 period is 2.7 to 1. Although the estimates made in this study are subject to a fair degree of uncertainty, we believe they provide a reasonable approximation of the national benefits resulting from Federal appliance efficiency standards.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗

The Search for VH → VWW standard model higgs production in the trilepton signature with 5.9fb -1 of data from p$\bar{p}$ collisions at √s=1.96 GeV

We present here the search for Standard Model V H → VWW → lll + E T (missing energy due to neutrinos) production, where V is a W or Z weak vector boson, which uses up to 5.9 fb -1 of integrated luminosity. This analysis has recently added to the CDF high-mass Higgs group three new signal topologies characterized by a tri-lepton signature, which are chosen to isolate the V H → VWW associated production signals in the three-lepton signature. As such, we define three new regions for a WH analysis, a ZH 1-jet analysis, and a ZH ≥ 2-jet analysis with which we expect to contribute an additional 5.8% (for mH = 165 GeV) acceptance to the current H → WW dilepton analysis. The ZH trilepton regions are defined by events passing a Z-boson selection: events having at least one lepton pairing (among three possible pairings) with opposite sign, same flavor, and a dilepton invariant mass within [76.0, 106.0] GeV–a ± 15 GeV window around the Z-boson mass. TheWH trilepton region is then defined as the set of trilepton events that are complement to those chosen by the Z-boson selection. These three new event topologies make a substantial contribution to the H → WW group result. As a measure of the sensitivity of this search, we compute the median expected limit on the at 95% confidence level (“C.L.”) on the production cross section (effectively the rate of production) for a StandardModel Higgs boson and report the result as a ratio to the theoretical production cross section. An observed limit ratio of one or less at a given mass would rule out the production of a Standard Model Higgs boson at that mass with 95% confidence. At m H = 165 GeV, the WH analysis expected limits reach 7.2 times the standard model cross section; the ZH 1-jet analysis is set at 29 times the expected standard model cross section; the ZH ≥ 2-jet analysis is set at 9.9 times the expected standard model cross section; and the combined trilepton analysis is set at 4.9 times the expected standard model cross section. We announce that the combination of this trilepton V H → VWW Higgs boson search and the previous CDF dilepton H → WW search achieves an expected median limit of 1.00 at 165 GeV/c 2 . The expected median limit of 1.00 indicates we anticipate a 50% probability of ruling out the existence of a Standard Model Higgs boson with a mass of 165 GeV/c 2 . This is the first time a single hadron collider experiment has achieved sensitivity to the production of a Standard Model Higgs boson. We do not see evidence for a significant signal of Higgs bosons in the data and place observed limits on the production of a Standard Model Higgs boson of 165 GeV/c 2 at 1.08 times Standard Model production cross section. Matthew

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Development of a Consensus Standard for Verification and Validation of Nuclear System Thermal-Fluids Software

With the resurgence of nuclear power and increased interest in advanced nuclear reactors as an option to supply abundant energy without the associated greenhouse gas emissions of the more conventional fossil fuel energy sources, there is a need to establish internationally recognized standards for the verification and validation (V&V) of software used to calculate the thermal-hydraulic behavior of advanced reactor designs for both normal operation and hypothetical accident conditions. To address this need, ASME (American Society of Mechanical Engineers) Standards and Certification has established the V&V 30 Committee, under the jurisdiction of the V&V Standards Committee, to develop a consensus standard for verification and validation of software used for design and analysis of advanced reactor systems. The initial focus of this committee will be on the V&V of system analysis and computational fluid dynamics (CFD) software for nuclear applications. To limit the scope of the effort, the committee will further limit its focus to software to be used in the licensing of High-Temperature Gas-Cooled Reactors. In this framework, the Standard should conform to Nuclear Regulatory Commission (NRC) and other regulatory practices, procedures and methods for licensing of nuclear power plants as embodied in the United States (U.S.) Code of Federal Regulations and other pertinent documents such as Regulatory Guide 1.203, 'Transient and Accident Analysis Methods' and NUREG-0800, 'NRC Standard Review Plan'. In addition, the Standard should be consistent with applicable sections of ASME NQA-1-2008 'Quality Assurance Requirements for Nuclear Facility Applications (QA)'. This paper describes the general requirements for the proposed V&V 30 Standard, which includes; (a) applicable NRC and other regulatory requirements for defining the operational and accident domain of a nuclear system that must be considered if the system is to be licensed, (b) the corresponding calculation domain of the software that should encompass the nuclear operational and accident domain to be used to study the system behavior for licensing purposes, (c) the definition of the scaled experimental data set required to provide the basis for validating the software, (d) the ensemble of experimental data sets required to populate the validation matrix for the software in question, and (e) the practices and procedures to be used when applying a validation standard. Although this initial effort will focus on software for licensing of High-Temperature Gas-Cooled Reactors, it is anticipated that the practices and procedures developed for this Standard can eventually be extended to other nuclear and non-nuclear applications.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

WE-A-17A-05: Differences in Applicator Configuration and Dwell Loading Between Standard and Image-Guided Tandem and Ring (T and R) HDR Brachytherapy

Purpose: To investigate differences in: (i) relative location of the tandem and the ring compared to a rigid standard applicator model; and (ii) relative loading and changes in loading pattern between standard and image-guided planning. Methods: All T and R insertions performed in 2013 in our institution under CT- or MR-guidance were analyzed. Standard plans were generated using library applicator models with a fixed relationship between ring and tandem, standardized uniform dwell loading and normalization to point A. The graphic plans and the associated standard-plan dwell configurations were compared: the rings were rigidly registered, and the residual tandem shift, rotation and maximum distance between plan tandem dwell and corresponding model tandem dwell were calculated. The normalization ratio (NR = the ratio of graphic versus standard-plan total reference air kerma [TRAK]), the general loading difference (GLD = the difference between graphic and standard ratios of the tandem versus the ring TRAK), and the percent standard deviation (SD% = SD/mean) of the tandem and the ring TRAK for the graphic plan (all standard-plans SD% = 0) were calculated. Results: 71 T and R were analyzed. Residual tandem shift, rotation and maximum corresponding dwell distance were 1.2±0.8mm (0.4±0.4mm lateral, 0.9±0.8mm craniocaudal, 0.4±0.3mm anterior-posterior), 2.3±1.9deg and 3.4±2.3mm. NR was 0.86±0.11 indicating a lower overall loading of the graphic compared to the standard plans. GLD was -0.12±0.16 indicating a modest increased ring loading relative to the tandem in the graphic plans. SD% was 2.1±1.6% for tandem and 2.8±1.9% for ring, indicating small deviations from uniform loading. Conclusion: Variability in the relative locations of the tandem and the ring necessitates the independent registration of each component model for accurate digitization. Our clinical experience suggests that graphically planned T and R results on average in a lower total dose to the patient, and in an increased relative loading of the ring component.

60 APPLIED LIFE SCIENCES↗