Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “stacking engineering”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 271 records · Page 15
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

Developing Stable Critical Materials and Microstructure for High-Flux and Efficient Hydrogen Production through Reversible Solid Oxide Cells

Reversible Solid Oxide Cells (RSOCs), which operate as either Solid Oxide Fuel Cells (SOFCs) or Solid Oxide Electrolytic Cells (SOECs), hold great promise for clean, high-efficiency energy conversion and hydrogen production. However, their commercial potential is hindered by stability issues arising from temperature-induced materials degradation. While substantial progress has been made in developing durable, reduced-temperature SOFCs - bringing them closer to commercial deployment, SOECs still exhibit substantially higher degradation rates at both the cell and stack levels under practical operating conditions.

08 HYDROGEN↗
DOE OSTI2020

The passivity of low-temperature carburized austenitic stainless steel AISI-316L in a simulated boiling-water-reactor environment

The passive film on low-temperature-carburized AISI-316L austenitic stainless steel was studied in an oxygenated, simulated boiling-water-reactor environment with normal water chemistry. The microstructure was studied using scanning electron microscopy, grazing-incidence X-ray diffractometry, Auger electron spectroscopy, X-ray energy-dispersive spectroscopy, and transmission electron microscopy. For non-surface engineered AISI-316L, three distinct layers were observed after exposure: an outer layer of larger nickel-oxide enriched particles with the spinel structure, an intermediate layer of small Cr-oxide-enriched hematite particles, and a compact inner layer of Cr-enriched oxide also having the spinel structure. Exposure of low-temperature-carburized AISI-316L, in contrast, resulted in only two distinct layers. These layers did not include a compact Cr-rich inner layer. Instead, the innermost layer consisted of an oxide with the spinel structure that was a mixture of Fe, Cr and Ni oxide. The outer layer on the low-temperature-carburized specimen consisted of large loosely stacked particles with the spinel structure of mixed composition. In addition to passive-film characterization, the corrosion rate was studied by monitoring mass loss. Finally, after 500 h of immersion, the mass changes measured were relatively low for all specimens indicating good adhesion and low oxidation rates.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Engineering Thermal Transport across Layered Graphene–MoS 2 Superlattices

Layering two-dimensional van der Waals materials provides a high degree of control over atomic placement, which could enable tailoring of vibrational spectra and heat flow at the sub-nanometer scale. In this work, using spatially resolved ultrafast thermoreflectance and spectroscopy, we uncover the design rules governing cross-plane heat transport in superlattices assembled from monolayers of graphene (G) and MoS 2 (M). Using a combinatorial experimental approach, we probe nine different stacking sequences, G, GG, MG, GGG, GMG, GGMG, GMGG, GMMG, and GMGMG, and identify the effects of vibrational mismatch, interlayer adhesion, and junction asymmetry on thermal transport. Pure G sequences display evidence of quasi-ballistic transport, whereas adding even a single M layer strongly disrupts heat conduction. The experimental data are described well by molecular dynamics simulations, which include thermal expansion, accounting for the effect of finite temperature on the interlayer spacing. The simulations show that an increase of ~2.4% in the layer separation of GMGMG, relative to its value at 300 K, can lead to a doubling of the thermal resistance. Using these design rules, we experimentally demonstrate a five-layer GMGMG superlattice “thermal metamaterial” with an ultralow effective cross-plane thermal conductivity comparable to that of air.

2D materials↗
DOE OSTI2022

Chiral superconductivity with enhanced quantized Hall responses in moiré transition metal dichalcogenides

Experimental demonstrations of tunable correlation effects in magic-angle twisted bilayer graphene have put two-dimensional moiré quantum materials at the forefront of condensed-matter research. Other twisted few-layer graphitic structures, boron-nitride, and homo- or hetero-stacks of transition metal dichalcogenides (TMDs) have further enriched the opportunities for analysis and utilization of correlations in these systems. Recent experiments within the latter material class confirmed the relevance of many-body interactions and demonstrated the importance of their extended range. Since the interaction, its range, and the filling can be tuned experimentally by twist angle, substrate engineering and gating, we here explore Fermi surface instabilities and resulting phases of matter of hetero-bilayer TMDs. Using an unbiased renormalization group approach, we establish in particular that hetero-bilayer TMDs are platforms to realize topological superconductivity with winding number |$\mathcal{N}$| = 4. We show that this state reflects in pronounced experimental signatures, such as distinct quantum Hall features.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2024

recon3d

SAND2025-00533O recon3d is a software tool that provides automated 3D reconstruction and meshing capabilities. It processes labeled 3D image data from various sources, starting from image stacks, and calculates 3D feature distributions like size, shape, and location. The software also has tools for downscaling rectilinear grid data and creating tetrahedral meshes directly from image data. recon3d can be used by novice users via the command line with a properly formatted configuration file. Sandia National Laboratories is a multimission laboratory managed and operated by National Technology & Engineering Solutions of Sandia, LLC, a wholly owned subsidiary of Honeywell International Inc., for the U.S. Department of Energy’s National Nuclear Security Administration under contract DE-NA0003525.

Emery, John↗
DOE OSTI2025

Fractional Quantum Anomalous Hall Effect

The realization of the fractional quantum anomalous Hall effect (FQAHE) in a zero-field fractional Chern insulator is a new advancement in condensed matter physics, resulting from the interplay among strong correlations, topology, and spontaneous time-reversal symmetry breaking in lattice systems. In this review, we highlight the experimental and theoretical progress toward achieving FQAHE in two material platforms: twisted bilayer MoTe 2 and rhombohedral-stacked multilayer graphene. These systems host narrow topological bands with nontrivial Chern numbers, enabling interaction-driven fractionalized states analogous to the fractional quantum Hall effect, but without external magnetic fields. We discuss how spontaneous ferromagnetism, moiré lattice reconstruction, and band topological effects underpin the emergence of FQAHE in twisted MoTe 2 . We describe experimental discoveries of zero-field fractional Chern insulators in both transport and optical experiments, as well as signatures of composite Fermi liquids and higher-energy Chern band, which may shed light on engineering nonabelian states. In rhombohedral graphene/hexagonal boron nitride moiré superlattices, we review the recent observations of fractionally quantized Hall resistance, connections between FQAHE and extended quantum anomalous Hall phases, and the coexistence of superconductivity and FQAHE. Furthermore, these discoveries not only deepen our understanding of strongly correlated topological matter but also open new frontiers for exploring nonabelian anyons, fault-tolerant quantum computation, and topological opto-spintronics free of magnetic fields.

bilayer↗
DOE OSTI2022

Pseudo-halide anion engineering for efficient quasi-2D Ruddlesden-Popper tin perovskite solar cells

Quasi-two-dimensional (2D) organic-inorganic hybrid tin perovskites have emerged as promising alternatives to lead-based perovskites in thin-film photovoltaics because of their reduced toxicity and improved stability. However, the undesired small n-value 2D phases and disordered crystal orientation enormously restrict the efficiency of quasi-2D tin perovskite solar cells (PSCs) due to uncontrollable nucleation and crystal growth processes. Here, we propose a mixed pseudo-halide anion engineering approach by using acetate (Ac - ) and tetrafluoroborate (BF 4 - ) anions to make quasi-2D Ruddlesden-Popper perovskites with a target formula of PEA 2 FA 4 Sn 5 I 16 . We find that the mixed Ac - and BF 4 - anions can not only promote homogeneously distributed PEA + cations in the precursor by effectively breaking the PEA + ···PEA + stacking but also retard the crystallization process by coordinating with unbonded SnI 2 , thereby, significantly reducing small n-value 2D phases, improving the crystal orientation, and suppressing the Sn 2+ oxidation. The resulting PSC exhibits up to 9% power conversion efficiency and 400 h stability.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Staging of ion propulsion thrusters

Spacecraft thruster systems are disclosed. In some instances, a spacecraft thruster system may include stacked ion thrusters and/or ion thruster layers. The ion thrusters and/or ion thruster layers may be sequentially activated and jettisoned from the thruster system after use.

33 ADVANCED PROPULSION SYSTEMS↗
DOE OSTI2022

Electrocaloric cooling with electrostatic actuation

A solid-state heat transporting device including a heat transporting element whose uniformity of contact with one or multiple surfaces is controllable so that various amounts of heat may be transported to and from the one or multiple surfaces. The heat transporting element uses the electrocaloric effect to absorb and release the heat and the uniformity of contact is controlled using an electrostatic effect which may change the shape of the heat transporting element. In one embodiment, the heat transporting element is an electrostatically actuated P(VDF-TrFE-CFE) polymer stack achieving a high specific cooling power of 2.8 W/g and a COP of 13 (the highest reported coefficient of performance to date) when used as a cooling device.

42 ENGINEERING↗
DOE OSTI2024

Optimization of Membrane-based Carbon Capture using Dimensional Analysis, CFD and Process System Engineering

Carbon capture is a promising option to mitigate CO2 emissions from existing coal-fired power plants, cement and steel industries, and petrochemical complexes. Among the available technologies, membrane-based carbon capture presents the lowest energy consumption, operating costs, and carbon footprint. In addition, membrane processes have important operational flexibil-ity and response times. On the other hand, the major challenges to widespread application of this technology are related to reducing capital costs and improving membrane stability and durability.To upscale the technology into stacked flat sheet configurations, high fidelity computational fluid dynamics (CFD) that describes the separation process accurately are required. High fidelity simulations have been shown to be effective in studying the complex transport phenomena in membrane systems. In addition, obtaining high CO2 recovery percentages and product purity requires a multi-stage membrane process, where the optimal network configuration of the membrane modules must be studied in a systematic way. In order to address the design problem at process scale, we formulate a superstructure for the membrane-based carbon capture, including up to three separation stages. In the formulation of the optimization problem, we include reduced models, based on rigorous CFD simulations of the membrane modules. Numerical results indicate that the optimal design includes three membrane stages, and the capture cost is 45.4 $/t-CO2.

Pedrozo, Hector A.↗
DOE OSTI2022

Performance and cost of fuel cells for off-road heavy-duty vehicles

Hydrogen fuel cell-powered off-road vehicles can replace hydrocarbon-powered off-road vehicles to reduce carbon dioxide and criteria pollutant emissions in the agriculture, construction, and mining industries. Vehicle manufacturers and customers recognize health and environmental benefits of emissions reductions but are ultimately compelled by the total cost of ownership of their vehicles. In this study, we conduct a technoeconomic evaluation for three hallmark off-road vehicles, tractors, wheel loaders, and excavators, comparing vehicles with hydrogen fuel cell + battery hybrid powertrains to traditional diesel powertrains. Stakeholder-valued performance metrics include fuel cell engine power, engine durability, hydrogen consumption rate, hydrogen storage system volume, and energy-regenerative drivetrain efficiency. The total cost of ownership includes capital, operating and maintenance, fuel, and fuel storage costs. State-of-the-art fuel cell powered wheel loaders and excavators are currently cost competitive with diesel platforms. If targeted improvements to cost, performance, and durability improvements of fuel cell stacks and storage systems are achieved, fuel cell systems would be cost competitive for tractors and significantly lower total cost of ownership options for wheel loaders and excavators.

33 ADVANCED PROPULSION SYSTEMS↗
DOE OSTI2023

Structure of V-defects in long wavelength GaN-based light emitting diodes

The V-defect is a naturally occurring inverted hexagonal pyramid structure that has been studied in GaN and InGaN growth since the 1990s. Strategic use of V-defects in pre-quantum well superlattices or equivalent preparation layers has enabled record breaking efficiencies for green, yellow, and red InGaN light emitting diodes (LEDs) utilizing lateral injection of holes through the semi-polar sidewalls of the V-defects. In this article, we use advanced characterization techniques such as scattering contrast transmission electron microscopy, high angle annular dark field scanning transmission electron microscopy, x-ray fluorescence maps, and atom probe tomography to study the active region compositions, V-defect formation, and V-defect structure in green and red LEDs grown on (0001) patterned sapphire and (111) Si substrates. We identify two distinct types of V-defects. The “large” V-defects are those that form in the pre-well superlattice and promote hole injection, usually nucleating on mixed (Burgers vector b = ±a±c⁠) character threading dislocations. In addition, “small” V-defects often form in the multi-quantum well region and are believed to be deleterious to high-efficiency LEDs by providing non-radiative pathways. The small V-defects are often associated with basal plane stacking faults or stacking fault boxes. Furthermore, we show through scattering contrast transmission electron microscopy that during V-defect filling, the threading dislocation, which runs up the center of the V-defect, will “bend” onto one of the six {10$\overline{1}$1} semi-polar planes. In conclusion, this result is essential to understanding non-radiative recombination in V-defect engineered LEDs.

42 ENGINEERING↗
DOE OSTI2026

A New Platform for Twistronics: Perovskite Moiré Superlattices Beyond van der Waals

Moiré superlattices have reshaped condensed‐matter physics by enabling twist‐angle engineering of electronic and excitonic states, traditionally in van der Waals (vdW) systems. This Perspective focuses on perovskites as a transformative non‐van der Waals (non‐vdW) platform for twistronics. These materials are distinguished by ionic‐covalent bonding and soft octahedral lattices that support deep moiré potentials (≈100–200 meV), which in turn yield bright, room‐temperature excitons and tunable quantum phenomena. We organize recent advances into two core classes: (i) moiré superlattices constructed from 2D Ruddlesden‐Popper (RP) perovskites via spontaneous or guided twisted stacking; and (ii) moiré architectures in 3D perovskite lamellae, achieved through topotactic 2D RP‐to‐3D conversion and ligand‐induced self‐assembly. Key experimental observations in these systems include twist‐tunable moiré periods, suppressed exciton–exciton annihilation, flat band‐like transport, and ferroelectric vortex lattices in their oxide perovskite counterparts. Here, we outline key bottlenecks, including defects arising during phase conversion, stringent lattice‐matching requirements, and the absence of in situ twist metrology, and highlight opportunities in lattice‐mismatched heterostructures and multifunctional quantum‐optoelectronic devices. Collectively, these advances establish perovskite moiré systems as a critical bridge between fundamental moiré physics and room‐temperature technological applications.

2D Ruddlesden–Popper perovskites↗
DOE OSTI2021

An FEM-Based Peridynamic Model for Failure Analysis of Unidirectional Fiber-Reinforced Laminates

To predict the mixed damage modes of unidirectional fiber-reinforced polymer (FRP) laminates under dynamic loading, an FEM-based peridynamic model is introduced in this paper. Based on its geometric structure and material composition, a long fiber lamina is considered a transversely isotropic medium as a result of homogenization at the meso-scale. The laminated structure is modeled by stacking surface mesh layers with arbitrary fiber angles along the thickness direction. The peridynamic bonds between Gauss points connect the separated elements. These bonds are classified as inner-layer bonds and inter-layer bonds. To represent the anisotropy of a laminate, the micro-elastic modulus of the inner-layer and inter-layer bonds is calculated from the anisotropic engineering material constants separately. To capture complex failure behaviors of laminate structures, an empirical damage model is proposed for the tension/ compression breakage of peridynamic bonds. This damage model can control the in-plane and delamination failure process. Finally, benchmark tests are conducted to validate the elastic response of laminates under dynamic loading. In terms of damage analysis, the proposed model can capture the complex damage modes and resistive force of laminate structures.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Vacuum Insulator Flashover Physics LDRD Report

Large, pulsed power and high voltage systems often employ a stack of insulators to separate a vacuum section away from water or oil sections. The size of this insulator stack often drives overall costs and feasibility of these systems. An electric breakdown along the insulator surface is a primary failure mechanism and is especially impactful if it occurs while power is still being delivered downstream. This report describes a set of experimental and modeling investigations into the cause of these breakdowns, especially focusing on the much less well-understood anode-initiated breakdowns that occur during early parts of power delivery. Additionally, new diagnostics for assessing relevant material properties and behavior of insulators are described. These results describe breakdown behavior and evolution at new temporal and spatial fidelities and provide hypotheses and some answers as to how these breakdowns can occur. This new understanding of the roles of different physics phenomena guide modifications and trade-offs in generating newer insulator stack designs that are smaller and/or have higher electrical stress thresholds.

42 ENGINEERING↗
DOE OSTI2022

Controlled Dielectric Breakdown to Form Pinhole Passivated Contacts

This contribution explores a low-temperature route to forming dielectric pinholes to form poly-Si/dielectric/c-Si passivated contacts. The method utilizes controlled dielectric breakdown to form nanoscale pinholes in a thick (non-tunnelling) dielectric which, when annealed, allows dopant atoms to pass from doped poly-Si through the dielectric and into the c-Si wafer forming conductive pathways. We show that the pinholes can be repassivated with dopants and H diffusion which results in increased PL signals after processing. The method can be expanded to optimized dielectric passivation stacks (not just a single layer) and can be formed in parallel over the faces of the wafer in selected areas (only under the grid).

controlled dielectric breakdown↗
DOE OSTI2023

Numerical Analysis and Flow Induced Vibration Studies in Pressurized Helium Gas Cooling Channels

Los Alamos National Laboratory (LANL) is working with NorthStar Medical Radioisotopes (NMR) on their efforts to produce Mo-99 from the irradiation of Mo-100 targets. The NMR target consists of an Inconel window that allows the electron beam to penetrate and irradiate a stack of Mo-100 discs. The irradiation process generates large amounts of heat and is cooled using pressurized helium gas flowing at 400 g/s. LANL provides both numerical analysis support and experimental support. Computational fluid dynamics (CFD) simulations for both 300 g/s and 400 g/s are performed on the NMR target to analyze the helium flow through the NMR system. The pressure drop, the mass flow rate through each of the disc and window channels and the force applied on the first disc are some of the quantities estimated using CFD. These results will be combined with Monte Carlo N-Particle (MCNP) estimates of heat flux into the system from the electron beam to perform conjugate heat transfer analysis (CHT). The experiments presented in this report focus on the effect of the flow induced vibrations from helium flowing through the coolant gaps between the discs. There is concern that the flow induced vibrations may lead to excessive mass loss of the enriched Mo-100 discs, and the goal would be to mitigate the mass loss. This work presents benchtop tests of flow through a subset of the target stack which involves high speed imaging and displacement measurements used to estimate disc vibration, as well as mass loss.

42 ENGINEERING↗