Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “solution deposition”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 271 records · Page 15
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

Electroplated Polymer‐Modified Carbon Fiber for Performance‐Enhancing Composite Interfaces

Carbon fiber composite performance relies on the fiber-matrix interface for effective load transfer. To enhance interfacial properties between the fiber and matrix, often carbon fiber surfaces are oxidatively and covalently modified to incorporate chemical functional groups. By contrast, here, noncovalent electrodeposition of functional polyelectrolyte is applied onto conducting carbon fibers from aqueous solutions. A natural polymer, chitosan (CS), is electro-deposited onto the fiber surface, which undergoes multi-scale physical interactions. The bound CS layer with abundant amine functionalities reacts with epoxy moieties within the matrix to improve the interfacial properties. The scalable and energy-efficient electrodeposition eliminates traditional functionalization and sizing requirements of carbon fiber while delivering significantly higher mechanical performance with enhanced consistency. For continuous fiber reinforced composites, compared to conventional fibers, apparent interlaminar shear strength increases by 27%, reaching ≈86 MPa. The short fiber composites with only 2–11 wt.% fibers exhibit ≈20% increase in tensile strength with a peak performance of 120 MPa. Unlike traditionally treated and sized carbon fiber, this approach delivers coated fibers with long shelf-life and allows recovery of both CS in electrolyte form and carbon fiber by continuous electrochemical processing of the modified fibers with inverse polarity; thus, it promotes overall fiber recyclability.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Neutron capture of UO 2 targets prepared by spin-coating assisted combustion synthesis

Two uranium dioxide (UO 2 ) targets of (414 ± 23) nm and (1092 ± 93) nm thicknesses were prepared on 6061 aluminum alloy and puratronic grade aluminum backing materials. The targets were deposited with a novel method combining spin coating and solution combustion synthesis (SCS). The target layers consisted of small (3–7 nm) UO 2 grains and uniformly distributed ultra-small (1–3 nm) pores. The prepared targets were tested at the Los Alamos National Laboratory’s LANSCE facility for neutron irradiation damage and suitability for neutron capture experiments. The samples showed no signs of target material loss after the irradiation. However, irradiation caused a significant increase in the grain size (4–10 nm), as well as upward mass diffusion and coalescence of the pores due to the thermal spikes. The magnesium in the aluminum 6061 alloy backing also diffused into the UO 2 layer during neutron irradiation. The structural changes in the target after the irradiation do not affect the data from neutron capture. As a result, the new method can be used more broadly to prepare other actinide targets for nuclear physics experiments.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗
DOE OSTI2021

Hyperstoichiometric Uranium Dioxides: Rapid Synthesis and Irradiation-Induced Structural Changes

Uranium dioxide (UO 2 ), the primary fuel for commercial nuclear reactors, incorporates excess oxygen forming a series of hyperstoichiometric oxides. Thin layers of these oxides, such as UO 2.12 , form readily on the fuel surface and influence its properties, performance, and potentially geologic disposal. This work reports a rapid and straightforward combustion process in uranyl nitrate–glycine–water solutions to prepare UO 2.12 nanomaterials and thin films. We also report on the investigation of the structural changes induced in the material by irradiation. Despite the simple processing aspects, the combustion synthesis of UO 2.12 has a sophisticated chemical mechanism involving several exothermic steps. Raman spectroscopy and single-crystal X-ray diffraction (XRD) measurements reveal the formation of a complex compound containing the uranyl moiety, glycine, H 2 O, and NO 3 – groups in reactive solutions and dried combustion precursors. Combustion diagnostic methods, gas-phase mass spectroscopy, differential scanning calorimetry (DSC), and extracted activation energies from DSC measurements show that the rate-limiting step of the process is the reaction of ammonia with nitrogen oxides formed from the decomposition of glycine and uranyl nitrate, respectively. However, the exothermic decomposition of the complex compound determines the maximum temperature of the process. In situ transmission electron microscopy (TEM) imaging and electron diffraction measurements show that the decomposition of the complex compound directly produces UO 2 . The incorporation of oxygen at the cooling stage of the combustion process is responsible for the formation of UO 2.12 . Spin coating of the solutions and brief annealing at 670 K allow the deposition of uniform films of UO 2.12 with thicknesses up to 300 nm on an aluminum substrate. Irradiation of films with Ar 2+ ions (1.7 MeV energy, a fluence of up to 1 × 10 17 ions/cm 2 ) shows unusual defect-simulated grain growth and enhanced chemical mixing of UO 2.12 with the substrate due to the high uranium ion diffusion in films. As a result, the method described in this work allows the preparation of actinide oxide targets for fundamental nuclear science research and studies associated with stockpile stewardship.

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗
DOE OSTI2020

Efficient Intermolecular Energy Exchange and Soft-ionization of Water at Nanoplatelet Interfaces

X-ray, energetic photon and electron irradiation can ionize and electronically excite target atoms and molecules. These excitations undergo complicated relaxation and energy transfer processes that ultimately determine the manifold of system responses to the deposited excess energy. In weakly bound gas- and solution-phase samples, intermolecular Coulomb decay (ICD) and electron-transfer mediated decay (ETMD) can occur with neighboring atoms or molecules leading to efficient transfer of the excess energy to the surroundings. In ionic solids such as metal-oxides, intra- and inter-atomic Auger decay produces localized final states that lead to lattice damage and typically removal of cations from the substrate. The relative importance of Auger stimulated damage (ASD) versus ICD and ETMD in micro-solvated nanoparticle interfaces is not known. Though ASD is generally expected, essentially no lattice damage and very efficient ICD and ETMD resulting from ionization and electronic excitation of micro-solvated boehmite (AlOOH) nanoplatelets has been observed. Efficient energy transfer and soft ionization of interfacial molecules is likely a general phenomenon at gas-oxyhydroxide nanoparticle interfaces where the density of states of the ionized chemisorbed species significantly overlap the core hole states of the solid.

Jones, Brant M.↗
DOE OSTI2024

The brine of the times

New processes directly extract lithium from dilute sources. The accelerating global push to reduce carbon emissions is driving substantial demand for clean energy technologies and the materials on which they depend. Nations are vying for critical minerals, such as lithium, cobalt, and rare earth elements), to produce electric vehicles, energy storage devices, and other low-carbon technologies. Tremendous attention focuses on lithium, which is primarily sourced from either hard rock called spodumene or natural brines—solutions containing lithium and other salts found in continental deposits, for example. However, mining lithium often involves energy-intensive, laborious processes. On pages 1438 and 1444 of this issue, Li et al. and Song et al., respectively, report efficient ways to extract lithium from dilute brine. In conclusion, these advances open up opportunities for sustainable extraction from unexploited dilute brines.

Darling, Seth B.↗
DOE OSTI2023

Using Vertically Aligned Carbon Nanofiber Arrays on Rigid or Flexible Substrates for Delivery of Biomolecules and Dyes to Plants

The delivery of biomolecules and impermeable dyes to intact plants is a major challenge. Nanomaterials are up-and-coming tools for the delivery of DNA to plants. As exciting as these new tools are, they have yet to be widely applied. Nanomaterials fabricated on rigid substrate (backing) are particularly difficult to successfully apply to curved plant structures. This study describes the process for microfabricating vertically aligned carbon nanofiber arrays and transferring them from a rigid to a flexible substrate. We detail and demonstrate how these fibers (on either rigid or flexible substrates) can be used for transient transformation or dye (e.g., fluorescein) delivery to plants. We show how VACNFs can be transferred from rigid silicon substrate to a flexible SU-8 epoxy substrate to form flexible VACNF arrays. Further, to overcome the hydrophobic nature of SU-8, fibers in the flexible film were coated with a thin silicon oxide layer (2-3 nm). To use these fibers for delivery to curved plant organs, we deposit a 1 µL droplet of dye or DNA solution on the fiber side of VACNF films, wait 10 min, place the films on the plant organ and employ a swab with a rolling motion to drive fibers into plant cells. With this method, we have achieved dye and DNA delivery in plant organs with curved surfaces.

59 BASIC BIOLOGICAL SCIENCES↗
NASA NTRS1964

Metals plated on fluorocarbon polymers

Electroplating lead on fluorocarbon polymer parts is accomplished by etching the parts to be plated with sodium, followed by successive depositions of silver and lead from ultrasonically agitated plating solutions. Metals other than lead may be electroplated on the silvered parts.

Ford, H.↗
NASA NTRS1994

A Novel Method for Depositing Precious Metal Films on Difficult Surfaces

A guanidine-based vehicle was developed to deposit precious metal coatings on surfaces known to be difficult to coat. To demonstrate this method, a platinum coating was deposited on alumina fibers using a guanidine-platinum solution. X-ray diffraction confirmed that the only species present in the coating was platinum and that all of the carbon species had been removed upon heat treatment. SEM results showed that some porosity was present but that the coatings uniformly covered the fiber surface and adhered well to the finer.

Veitch, L. C.↗
NASA NTRS2010

Processing Nanostructured Sensors Using Microfabrication Techniques

Standard microfabrication techniques can be implemented and scaled to help assemble nanoscale microsensors. Currently nanostructures are often deposited onto materials primarily by adding them to a solution, then applying the solution in a thin film. This results in random placement of the nanostructures with no controlled order, and no way to accurately reproduce the placement. This method changes the means by which microsensors with nanostructures are fabricated. The fundamental advantage to this approach is that it enables standard microfabrication techniques to be applied in the repeated manufacture of nanostructured sensors on a microplatform.

Hunter, Gary W.↗
DOE OSTI2021

Methods of forming metals using ionic liquids

A method of forming an elemental metal (e.g., a rare-earth element) includes forming a multicomponent solution comprising an ionic liquid, a secondary component, and a metal-containing compound. The multicomponent solution is contacted with at least a first electrode and a second electrode. A current is passed between the first electrode to the second electrode through the multicomponent solution. The metal-containing compound is reduced to deposit the elemental metal therefrom on the first electrode.

Baek, Donna L.↗
DOE OSTI2020

Colloidal quantum wells for optoelectronic devices

Colloidal quantum wells, also called nanoplatelets, are nanoscopic materials displaying quantum confinement in two dimensions. Unlike colloidal quantum dots, colloidal quantum well ensembles have no inhomogeneous broadening due to an atomically-precise definition of the short axis, a fact which results in much narrower ensemble absorption and emission. Thus, colloidal quantum wells can translate many advantages of colloidal nanocrsytals or other solution-processable materials, such as scalable synthesis and substrate-agnostic deposition (particularly compared to epitaxial quantum wells), without sacrificing material uniformity. Furthermore, due to very narrow photoluminescnece peaks, these materials have found a home in applications involving light emission, such as downconversion enhancement films, light-emitting diodes, and lasers, in which they represent some of the best performers among solution-cast materials. As argued in this review, the full spectrum of epitaxial quantum well devices offers a roadmap to other potential applications, such as detection, electronics, electro-optics, non-linear optics, or intersubband devices, in which only nascent efforts have been made.

36 MATERIALS SCIENCE↗
NASA NTRS1991

Response of a confined gas to volumetric heating in the absence of gravity. I - Slow transients

A one-dimensional model for bulk motion induced by a transient volumetric heat source in a confined gas at zero gravity is considered. Rational approximation methods are used to derive a quantitative theory for the gas response to a spatiallly distributed, time-dependent internal power deposition. The resulting low Mach number compressible flow equations are solved by using perturbation methods. Solutions are given for a conduction-free core and thin conductive boundary layers adjacent to the end walls. It is found that may any spatially nonuniform power deposition will cause fluid motion. Net mass transport in the closed container will occur for certain spatially distributed heating. The model mimics the thermal effects of an exothermic gas phase reaction in vapor transport experiments conducted in space. The solutions demonstrate that thermally induced mass transport can be as large as diffusive mass transport in a typical experiment.

Herczynski, A.↗
DOE OSTI2024

Catalytic, Spectroscopic, and Theoretical Studies of Fe 4 S 4 -Based Coordination Polymers as Heterogenous Coupled Proton–Electron Transfer Mediators for Electrocatalysis

Iron–sulfur clusters play essential roles in biological systems, and thus synthetic [Fe 4 S 4 ] clusters have been an area of active research. Recent studies have demonstrated that soluble [Fe 4 S 4 ] clusters can serve as net H atom transfer mediators, improving the activity and selectivity of a homogeneous Mn CO 2 reduction catalyst. Here, in this work, we demonstrate that incorporating these [Fe 4 S 4 ] clusters into a coordination polymer enables heterogeneous H atom transfer from an electrode surface to a Mn complex dissolved in solution. A previously reported solution-processable Fe 4 S 4 -based coordination polymer was successfully deposited on the surfaces of different electrodes. The coated electrodes serve as H atom transfer mediators to a soluble Mn CO 2 reduction catalyst displaying good product selectivity for formic acid. Furthermore, these electrodes are recyclable with a minimal decrease in activity after multiple catalytic cycles. The heterogenization of the mediator also enables the characterization of solution-phase and electrode surface species separately. Surface enhanced infrared absorption spectroscopy (SEIRAS) reveals spectroscopic signatures for an in situ generated active Mn–H species, providing a more complete mechanistic picture for this system. The active species, reaction mechanism, and the protonation sites on the [Fe 4 S 4 ] clusters were further confirmed by density functional theory calculations. The observed H atom transfer reactivity of these coordination polymer-coated electrodes motivates additional applications of this composite material in reductive H atom transfer electrocatalysis.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

An AFM study of Zn/MnO 2 Co-deposition (ORISE Internship Report)

With the growing demand for rechargeable batteries, the aqueous Zn-ion battery has shown promise as a cheaper and safer alternative to modern Li-ion batteries. Meanwhile, for developing batteries with optimal charge transfer, electrodes with interpenetrating geometries have been explored to minimize the distance traveled by ions in the electrolyte. Creating a Zn-ion battery with interpenetrating electrodes may allow for more efficient cycling, but requires the co-deposition of anode and cathode materials. Because of the highly sensitive nature of electrodeposition, the presence of additional ions may have an impact on the success and homogeneity of cathode/anode deposition, possibly preventing the proper function of an interpenetrating Zn battery. This study examined the effects of added ions on Zn deposition through in situ Atomic Force Microscopy with the goal of determining whether the co-deposition of Zn and MnO 2 is a viable option for electrodes with interpenetrating geometries. Solutions of 1M ZnSO 4 and 1M ZnSO 4 + 0.1M C 4 H 6 MnO 4 were made to simulate normal and co-deposition conditions. Layers of Zn were electrodeposited onto a Cu microelectrode at a current density of 10mA cm -2 with intermittent AFM imaging after 50 deposited monolayers. The presence of manganese acetate (C 4 H 6 MnO 4 ) was found to decrease Zn nucleation size on the Cu UME, suggesting the presence of C 4 H 6 MnO 4 would not negatively impact the co-deposition of Zn and MnO 2 .

25 ENERGY STORAGE↗
DOE OSTI2021

Resolving Chemical and Spatial Heterogeneities at Complex Electrochemical Interfaces in Li-Ion Batteries

The high specific capacities of Ni-rich transition metal oxides have garnered immense interest for improving the energy density of Li-ion batteries (LIBs). Despite the potential of these materials, Ni-rich cathodes suffer from interfacial instabilities that lead to crystallographic rearrangement of the active material surface as well as the formation of a cathode electrolyte interphase (CEI) layer on the composite during electrochemical cycling. While changes in crystallographic structure can be detected with diffraction-based methods, probing the chemistry of the disordered, heterogeneous CEI layer is challenging. In this work, we use a combination of ex situ solid-state nuclear magnetic resonance (SSNMR) spectroscopy and X-ray photoemission electron microscopy (XPEEM) to provide chemical and spatial information, on the nanometer length scale, on the CEI deposited on LiNi 0.8 Mn 0.1 Co 0.1 O 2 (NMC811) composite cathode films. XPEEM elemental maps offer insight into the lateral arrangement of the electrolyte decomposition products that comprise the CEI and paramagnetic interactions (assessed with electron paramagnetic resonance (EPR) and relaxation measurements) in 13 C SSNMR provide information on the radial arrangement of the CEI from the NMC811 particles outward. Using this approach, here we find that LiF, Li 2 CO 3 , and carboxy-containing structures are directly appended to NMC811 active particles, whereas soluble species detected during in situ 1 H and 19 F solution NMR experiments (e.g., alkyl carbonates, HF, and vinyl compounds) are randomly deposited on the composite surface. We show that the combined approach of ex situ SSNMR and XPEEM, in conjunction with in situ solution NMR, allows spatially-resolved, molecular-level characterization of paramagnetic surfaces and new insights into electrolyte oxidation mechanisms in porous electrode films.

36 MATERIALS SCIENCE↗
NASA NTRS2002

Study of Lightweight Ni-Co Alloy Mirrors Obtained by Electroforming Techniques

One contribution in reducing the costs of optics in space can be provided by production of ultralight mirrors. The decrease in the weight of the primary mirror of a telescope is anticipated to lead to the possibility of increasing the size of the telescopes, therefore increasing the amount and distance from which information is received. An electroplating process of ultralight replica mirrors from nickel sulfamate solution will be described. Based on an experimental setup with cylindrical symmetry, flat mirrors with a diameter of 7 inches and thickness of 1.5 mm are made from a Ni-Co alloy. The composition of the resulting deposit is analyzed using Rutherford Backscattering Spectrometry (RBS) and Proton Induced X-ray Emission (PIXE). In order to resolve Ni and Co, 10 MeV nitrogen ions are used as projectiles in the RBS measurements. Solution parameters monitored during the deposition process using optical absorption and polarography will be correlated with the final concentration of Ni and Co in the deposit. Bath parameters like temperature, current density, agitation level and acidity are chosen at certain values and maintained constant from one sample to another throughout the deposition process. The purpose of the experiment is to obtain mirrors with near zero stress, and predetermined composition and hardness. This study is an intermediate step in obtaining through the same process, but with a larger scale setup, ultralight large aperture replica mirrors.

Jones, Ruth↗
DOE OSTI2023

Canister valve and actuator deposition in metered dose inhalers formulated with low-GWP propellants

A challenge in pressurised metered-dose inhaler (pMDI) formulation design is management of adhesion of the drug to the canister wall, valve and actuator internal components and surfaces. Wall-material interactions differ between transparent vials used for visual inspection and metal canister pMDI systems. This is of particular concern for low greenhouse warming potential (GWP) formulations where propellant chemistry and solubility with many drugs are not well understood. In this study, we demonstrate a novel application of X-ray fluorescence spectroscopy using synchrotron radiation to assay the contents of surrogate solution and suspension pMDI formulations of potassium iodide and barium sulphate in propellants HFA134a, HFA152a and HFO1234ze(E) using aluminium canisters and standard components. Preliminary results indicate that through unit life drug distribution in the canister valve closure region and actuator can vary significantly with new propellants. For solution formulations HFO1234ze(E) propellant shows the greatest increase in local deposition inside the canister valve closure region as compared to HFA134a and HFA152a, with correspondingly reduced actuator deposition. This is likely driven by chemistry changes. For suspension formulations HFA152a shows the greatest differences, due to its low specific gravity. These changes must be taken into consideration in the development of products utilising low-GWP propellants.

60 APPLIED LIFE SCIENCES↗
DOE OSTI2020

Electrocatalysts, and fuel cells containing them

Provided are electrocatalysts, fuel cells, methods of making fuel cells, and methods of generating an electric current, each featuring a platinum (Pt)-containing substrate in contact with an aqueous solution comprising Pb2+. Electrocatalysts of the invention are formed via underpotential deposition (UPD) when a trace amount of Pb2+ is present in the electrolyte of a half anodic cell for oxidizing formic acid using Pt as the anode. Surprisingly, the UPD process dramatically enhances the activity of formic acid oxidation, at least as much as 10-fold compared with palladium (Pd) black. In an embodiment, the electrocatalyst comprises a Pt-containing substrate, a submonolayer of lead (Pb) adsorbed onto the Pt-containing substrate, and an aqueous solution comprising Pb2+, wherein the concentration of Pb2+ in the aqueous solution is 10 to 500 μm.

30 DIRECT ENERGY CONVERSION↗