Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “slicing”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 271 records · Page 15

Analysis of multispectral images simulating ERTS observations

Simulation studies of selected aircraft and spacecraft acquired images were initiated in response to anticipated desires of the user community for simulated imagery prior to launch of ERTS-A. Principal modes of simulation included: (1) areas of coverage comparable to ERTS; (2) spatial resolutions within these images similar to ERTS; (3) spectral responses analogous to that expected from each channel on both the return beam vidicon and multispectral scanner, leading to production of photographic images that should appear similar to those representing each band in the two sensors; and (4) runthroughs of several analytical techniques, such as color density slicing, color additive viewing, and computer-generated reflectance and surface temperature maps, by which ERTS data can be analyzed, interpreted, and applied. The two areas involved in the simulation study were Wyoming and the Chesapeake Bay region.

Short, N. M.↗

Discrimination of fluoride and phosphate contamination in central Florida for analyses of environmental effects

A study was made of the spatial registration of fluoride and phosphate pollution parameters in central Florida by utilizing remote sensing techniques. Multispectral remote sensing data were collected over the area and processed to produce multispectral recognition maps. These processed data were used to map land areas and waters containing concentrations of fluoride and phosphate. Maps showing distribution of affected and unaffected vegetation were produced. In addition, the multispectral data were processed by single band radiometric slicing to produce radiometric maps used to delineate areas of high ultraviolet radiance, which indicates high fluoride concentrations. The multispectral parameter maps and radiometric maps in combination showed distinctive patterns, which are correlated with areas known to be affected by fluoride and phosphate contamination. These remote sensing techniques have the potential for regional use to assess the environmental impact of fluoride and phosphate wastes in central Florida.

Coker, A. E.↗

Theoretical frameworks for testing relativistic gravity. IV - A compendium of metric theories of gravity and their post-Newtonian limits.

Metric theories of gravity are compiled and classified according to the types of gravitational fields they contain, and the modes of interaction among those fields. The gravitation theories considered are classified as (1) general relativity, (2) scalar-tensor theories, (3) conformally flat theories, and (4) stratified theories with conformally flat space slices. The post-Newtonian limit of each theory is constructed and its Parametrized Post-Newtonian (PPN) values are obtained by comparing it with Will's version of the formalism. Results obtained here, when combined with experimental data and with recent work by Nordtvedt and Will and by Ni, show that, of all theories thus far examined by our group, the only currently viable ones are general relativity, the Bergmann-Wagoner scalar-tensor theory and its special cases (Nordtvedt; Brans-Dicke-Jordan), and a recent, new vector-tensor theory by Nordtvedt, Hellings, and Will.

Ni, W.-T.↗

A new theory of gravity

A new relativistic theory of gravity is presented. This theory agrees with all experiments to date. It is a metric theory, it is Lagrangian-based, and it possesses a preferred frame with conformally-flat space slices. With an appropriate choice of certain adjustable functions and parameters, this theory possesses precisely the same post-Newtonian limit as general relativity.

Ni, W.↗

Wetlands ecology

The author has identified the following significant results. The ERTS imagery analyzed provides approximately 2/3 coverage of the test site. Analysis was made using visual methods, density slicing, and multispectral analysis. Preliminary conclusions reached are that most, if not all, of the investigation objectives can be met. Saline and near-saline wetlands can be delineated from ERTS-1 images as the wetland-upland boundaries and land-water interface are clearly defined. Major plant species or communities such as Spartina alterniflora (high and low vigor forms), Spartina patens/Distichlis spicata, and Juncus roemarianus can be discriminated and spoil disposal areas identified.

Anderson, R. R.↗

Remote sensing in Iowa agriculture

The author has identified the following significant results. After receiving the ERTS-1 imagery, three methods of analysis of this imagery have been used. Observations noted are as follows: (1) Use of color additive and density slicing-color coding appears potentially useful for crop identification and automatic classification in Iowa for this time frame. The influence of soil association differences on the spectral response of the imagery will probably have to be taken into account for any automatic crop identification procedure to be successful. Small fields and the diversity of Iowa's cropping patterns also will cause significant problems for crop classifications. (2) The presence of high clouds and associated hazy atmospheric conditions markedly reduces the resolution of the ERTS-1 imagery. (3) Utilization of filtered 2 1/2 inch projectors is quite difficult because of multiple image registration problems. This procedure does, however, allow the interpreter to achieve image enlargement and the enhancement of response differences using two image projections.

Mahlstede, J. P.↗

Maneuver and buffet characteristics of fighter aircraft

The high subsonic and transonic characteristics of fighter aircraft and the factors affecting aerodynamic boundaries, such as maximum obtainable lift, buffet onset, pitchup, wing rock, and nose slice are discussed. Investigations were made using a general research configuration which encompassed a systematic matrix of wing design parameters. These results emphasized the sensitivity to section and planform geometry at the selected design point. The incorporation of variable-wing-geometry devices in the form of leading-edge slats or flaps was shown in a number of flight and wind-tunnel studies to provide controlled flow over a wide range of flight conditions and substantial improvements in maneuver capabilities. Additional studies indicated that the blending of a highly swept maneuver strake with an efficient moderately swept wing offers a promising approach for improving maneuver characteristics at high angles of attack without excessive penalties in structural weight.

Ray, E. J.↗

Geographic applications of ERTS-1 imagery to rural landscape change in eastern Tennessee

There are no author-identified significant results in this report. A multistage sampling experiment was conducted using low (10,000') and high (60,000') altitude aircraft imagery in comparison with orbital (560 miles) ERTS imagery. Although the aircraft data provide detailed landscape observations similar to ground truth data, they cover relatively small areas per image frame for irregular static slices of time. By comparison, ERTS provides repetitive observations in a regional perspective for broad areal coverage. Microdensitometric and computer techniques are being used to analyze the ERTS imagery for gray tone signatures, comparisons, and ultimately for landscape change detection.

Rehder, J. B.↗

Evaluate ERTS imagery for mapping and detection of changes of snowcover on land and on glaciers

The author has identified the following significant results. The area of snow cover on land was determined from ERTS-1 imagery. Snow cover in specific drainage basins was measured with the Stanford Research Institute console by electronically superimposing basin outlines on imagery, with video density slicing to measure areas. Snow covered area and snowline altitudes were also determined by enlarging ERTS-1 imagery 1:250,000 and using a transparent map overlay. Under very favorable conditions, snowline altitude was determined to an accuracy of about 60 m. Ability to map snow cover or to determine snowline altitude depends primarily on cloud cover and vegetation and secondarily on slope, terrain roughness, sun angle, radiometric fidelity, and amount of spectral information available. Glacier accumulation area ratios were determined from ERTS-1 imagery. Also, subtle flow structures, undetected on aerial photographs, were visible. Surging glaciers were identified, and the changes resulting from the surge of a large glacier were measured as were changes in tidal glacier termini.

Meier, M. F.↗

An evaluation of acquired data as a tool for management of wildlife habitat in Alaska

The author has identified the following significant results. Density sliced and digitized imagery of the Kuskokwin/Yukon Delta were analyzed. Color coded images of the isodensity displays were compared with existing vegetation maps of the ERTS-1 frames for the Yukon/Kuskokwin area. A high degree of positive correlation was found to exist between the ERTS-1 image and the conventionally prepared maps. Hydrologic phenomena were also analyzed. Digitization on South Dakota State Remote Sensing Center's SADE system provide some discrimination among several large lakes in the subject area. However, interpretation must await ground observations and depth measurements. An attempt will be made to classify large water bodies by depth classes.

Vantries, B. J.↗

Evaluate ERTS imagery for mapping and detection of changes of snowcover on land and on glaciers

The author has identified the following significant results. The percentage of snow cover area on specific drainage basins was measured from ERTS-1 imagery by video density slicing with a repeatability of 4 percent of the snow covered area. Data from ERTS-1 images of the melt season snow cover in the Thunder Creek drainage basin in the North Cascades were combined with existing hydrologic and meteorologic observations to enable calculations of the time distribution of the water stored in this mountain snowpack. Similar data could be used for frequent updating of expected inflow to reservoirs. Equivalent snowline altitudes were determined from area measurements. Snowline altitudes were also determined by combining enlarged ERTS-1 images with maps. ERTS-1 imagery was also successfully used to measure glacier accumulation area ratios for a small test basin.

Meier, M. F.↗

Identification, definition and mapping of terrestrial ecosystems in interior Alaska

The author has identified the following significant results. A transect of the Tanana River Flats to Murphy Dome, Alaska was accomplished. The transect includes an experimental forest and information on the range of vegetation-land form types. Multispectral black and white prints of the Eagle Summit Research Area, Alaska, were studied in conjunction with aerial photography and field notes to determine the characteristics of the vegetation. Black and white MSS prints were compared with aerial photographs of the village of Wiseman, Alaska. No positive identifications could be made without reference to aerial photographs or ground truth data. Color coded density slice scenes of the Eagle Summit Research Area were produced from black and white NASA aerial photographs. Infestations of the spruce beetle in the Cook Inlet, Alaska, were studied using aerial photographs.

Anderson, J. H.↗

Application of an electronic image analyzer to dimensional measurements from neutron radiographs

Means of obtaining improved dimensional measurements from neutron radiographs of nuclear fuel elements are discussed. The use of video-electronic image analysis relative to edge definition in radiographic images is described. Based on this study, an edge definition criterion is proposed for overcoming image unsharpness effects in taking accurate diametral measurements from radiographs. An electronic density slicing method for automatic edge definition is described. Results of measurements made with video micrometry are compared with scanning microdensitometer and micrometric physical measurements. An image quality indicator for estimating photographic and geometric unsharpness is described.

Vary, A.↗

Mechanisms of deterioration of nutrients phase 1

Experimental methods are studied by which freeze-dried foods of improved quality are produced. Considered are: (1) Factors effecting the loss of butanol from frozen aqueous food solutions during storage; (2) a freeze-drying microscope system for observing solidification processes in organic mixtures and aqueous inorganic salt solutions; (3) browning of high quality freeze-dried foods with minimal organoleptic and nutritional detoriation; (4) retention of PVP-n-propanol in freeze-dried food models; and (5) effects of freezing rate and sucrose immersion on taste and texture of freeze-dried apple slices.

Karel, M.↗

Application of ecological, geological and oceanographic ERTS-1 imagery to Delaware's coastal resources planning

The author has identified the following significant results. Communities containing five different coastal vegetation species, developed marshlands, and fresh water impoundments have been identified in ERTS-1 images. Suspended sediment and circulation patterns in imagery from five ERTS-1 passes over Delaware Bay have been enhanced and correlated with predicted current patterns. Conclusions reached are: (1) ERTS-1 is suitable platform for observing suspended sediment patterns and water masses synoptically over large areas. (2) Suspended sediment acts as a natural tracer allowing photointerpreters to deduce gross current circulation patterns from ERTS-1 imagery. (3) Under atmospheric conditions encountered along the East Coast of the United States MSS band 5 seems to give the best representation of sediment load in upper one meter of water column. (4) In the ERTS-1 imagery the sediment patterns are delineated by three to four neighboring shades of grey. (5) Negative transparencies of the ERTS-1 images give better contrast whenever the suspended sediment tones fall within the first few steps of the grey scale. (6) Color density slicing helps delineate the suspended sediment patterns more clearly and differentiate turbidity levels.

Klemas, V.↗

Maneuver and buffet characteristics of fighter aircraft

Recent research efforts in the improvement of the maneuverability of fighter aircraft in the high-subsonic and transonic speed range are reviewed with emphasis on the factors affecting aerodynamic boundaries, such as maximum obtainable lift, buffet onset, pitchup, wing rock, and nose slice. The investigations were made using a general research configuration which encompassed a systematic matrix of wing-design parameters. These results illustrated the sensitivity of section and planform geometry to a selected design point. The incorporation of variable-geometry wing devices in the form of flaps or leading-edge slats was shown to provide controlled flow over a wide range of flight conditions and substantial improvements in maneuver capabilities. Additional studies indicated that the blending of a highly swept maneuver strake with an efficient, moderately swept wing offers a promising approach for improving maneuver characteristics at high angles of attack without excessive penalties in structural weight.

Ray, E. J.↗

Preliminary evaluation of ERTS-1 for determining numbers and distribution of prairie ponds and lakes

ERTS-1 and aircraft multispectral data collected over a North Dakota test site during July 1972, are compared to evaluate the capability of the satellite sensors to detect numbers and distribution of prairie ponds and lakes. Recognition maps using ERTS-1, MSS 7 data are generated using a level slicing technique. Surface water areas larger than two acres are recognized, but ponds in the one-to two-acre range are detected only at random. The proportion estimation technique will improve the accuracy of area determination and small pond detection.

Work, E. A., Jr.↗

Evaluation of ERTS imagery for mapping and detection of changes of snowcover land and on glaciers

The percentage of snowcover area on specific drainage basins was measured from ERTS imagery by video density slicing with a repeatability of 4 percent of the snowcovered area. Data from ERTS images of the melt season snowcover in the Thunder Creek drainage basin in the North Cascades were combined with existing hydrologic and meteorologic observations to enable calculation of the time distribution of the water stored in this mountain snowpack. Similar data could be used for frequent updating of expected inflow to reservoirs. Equivalent snowline altitudes were determined from area measurements. Snowline altitudes were also determined by combining enlarged ERTS images with maps with an accuracy of about 60 m under favorable conditions. Ability to map snowcover or to determine snowline altitude depends primarily on cloud cover and vegetation and secondarily on slope, terrain roughness, sun angle, radiometric fidelity, and amount of spectral information available.

Meier, M. F.↗