Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “shock dynamics”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 271 records · Page 15
All sourcesNASA NTRSDOE OSTI
NASA NTRS1988

The central engine of quasars and AGN's - Shock-accelerated relativistic protons

A simple dynamical model is presented in which protons are Fermi-shock-accelerated to relativistic energies and do not readily fall into the black hole. It is shown that, even though the nonthermal radiation from QSOs and AGNs is generally well below the Eddington limit, it is still highly correlated and proportional to the mass. In the present model, the proportionality constant is determined by the p-p cross-section and the minimum shock radius (in units of the Schwarzschild radius) where a stable shock is assumed to exist. The model predicts a rapid drop off in efficiency as this shock radius increases.

Ellison, Donald C.↗
DOE OSTI2024

High pressure suppression of plasticity due to an overabundance of shear embryo formation

Abstract High pressure shear band formation is a critical phenomenon in energetic materials due to its influence on both mechanical strength and mechanochemical activation. While shear banding is known to occur in a variety of these materials, the governing dynamics of the mechanisms are not well defined for molecular crystals. We conduct molecular dynamics simulations of shock wave induced shear band formation in the energetic material 1,3,5-trinitroperhydro-1,3,5-triazine (RDX) to assess shear band nucleation processes. We find, that at high pressures, the initial formation sites for shear bands, “embryos”, form in excess and rapidly lower deviatoric stresses prior to shear band formation and growth. This results in the suppression of plastic deformation. A local cluster analysis is used to quantify and contrast this mechanism with a more typical shear banding seen at lower pressures. These results demonstrate a mechanism that is reversible in nature and that supersedes shear band formation at increased pressures. We anticipate that these results will have a broad impact on the modeling and development of high-strain rate application materials such as those for high explosives and hypersonic systems.

36 MATERIALS SCIENCE↗
DOE OSTI2025

X-ray microscopy and talbot imaging with the matter in extreme conditions X-ray imager at LCLS

The last decade has shown the great potential that X-ray Free Electron Lasers (FEL) have to study High Energy Density (HED) physics. Experiments at FELs have made significant breakthroughs in Shock Physics and Dynamic Diffraction, Dense Plasma Physics and Warm Dense Matter Science, using techniques such as isochoric heating, inelastic scattering, small angle scattering and X-ray diffraction. In addition, and complementary to these techniques, the coherent properties of the FEL beam can be used to image HED samples with high fidelity. We present new imaging diagnostics and techniques developed at the Matter in Extreme Conditions (MEC) instrument at Linac Coherent Light Source (LCLS) over the last few years. We show results in Phase Contrast Imaging geometry, where the X-ray beam propagates from the target to a camera revealing its phase, as well as in Direct Imaging geometry, where a real image of the sample plane is produced in the camera with a spatial resolution down to 200 nm. Last, we show an implementation of the Talbot Imaging method allowing both X-ray phase and intensity measurements change introduced by a target with sub-micron resolution.

47 OTHER INSTRUMENTATION↗
DOE OSTI2024

Dynamic and quasi-static strength of additively repaired aluminum

Additive manufacturing has the potential to repair high value components, saving significant time and resources; however, the level of reliability and performance of additive repairs is still relatively unknown. In this work, the structure–property and performance of laser wire additive manufacturing repairs in 1100 aluminum are investigated. Two types of intentional damage are inflicted on the samples and subsequently repaired with pulsed laser deposition additive manufacturing. Quasi-static (10 –3 s –1 ) and high strain-rate (10 –3 s –1 ) mechanical testing is carried out with in situ diagnostics and post-mortem imaging. The results show that while the quasi-static strength and ductility of samples with a repaired region are lower than a pristine sample, the dynamic strength under shock loading is comparable. This work highlights both the potential utility of additive manufacturing for repair purposes, the significant risk of compromised performance of additive parts under specific conditions, and the need to test at varying strain rates to fully characterize material performance.

36 MATERIALS SCIENCE↗
DOE OSTI2026

Time-resolved unsteady shock motion and spectral analysis of a hypersonic shock-wave/boundary-layer interaction over a double-cone

Direct experimental measurements of double-cone shock-wave/boundary-layer interaction dynamics at Mach 7.2 were collected using a schlieren-based shock-detection algorithm at the University of Texas at San Antonio. The points of flow separation and reattachment were spatially and spectrally evaluated at 300 kHz for time-resolved characterization of the unsteadiness of this flow field. The separation bubble was found to rapidly expand and contract about a large mean length. Spectral analysis of the velocity fluctuations of this motion revealed this behavior to be a turbulent phenomenon, with spectral energy trends consistent with the Kolmogorov theory for the turbulent energy cascade.

Glasby, Ryan [ORNL]↗
DOE OSTI2026

Validation of 266 nm UV Raman thermometry using the alpha-to-beta quartz transition

Ultraviolet Raman scattering is a promising diagnostic for temperature measurements relevant to dynamic compression experiments, where improved signal strength and reduced background are critical. In this work, we experimentally validate Raman thermometry at 266 nm using crystalline quartz heated through the α to β phase transition in a tube furnace. Quartz provides a useful benchmark because of its well-characterized transition temperature near 846 K at ambient pressure. Temperatures inferred from the Stokes to anti-Stokes intensity ratio are compared with thermocouple measurements and with the observed phase transition. Single-shot Raman temperatures track the thermocouple closely, with an empirical single-shot scatter of approximately ±15 K under the present conditions. Temporal averaging reduces shot-to-shot scatter and improves agreement between the Raman temperatures and thermocouple readings to within approximately 8 K, while the transition is identified within 5 K of the accepted value. Measurements are performed using the fourth harmonic of a nanosecond pulsed Nd:YAG laser at 266 nm. The shorter excitation wavelength provides enhanced Raman scattering efficiency and reduced visible background relative to conventional visible excitation. Comparison with 532 nm Raman measurements acquired in the same experimental geometry demonstrates substantially improved signal-to-noise ratio for the UV configuration. These results establish 266 nm Raman thermometry as a reliable and accurate temperature diagnostic under controlled heating conditions and provide a quantitative benchmark for future application in dynamic compression and shock physics experiments.

Chemistry - Chemical explosives↗
DOE OSTI2026

Adaptive Stiffness Power Take-Off System for a Hydraulic Hose-Pump Point Absorber Wave Energy Converter

Two crucial challenges faced in the design of ocean wave energy converters (WECs) are maintaining high capacity factors and remaining robust in everchanging, harsh ocean environments. This study introduces a novel mechanism for achieving reactive WEC control with a soft hydraulic power take-off, thereby addressing both challenges. The device of interest involves a hydraulic pump, constructed from a fluidic flexible matrix composite (F2MC), which is cyclically stretched by driving waves and pressurizes working fluid through a turbine-generator. This class of fiber-reinforced stretch hoses is established for ocean use as robust moorings and shock absorbers. The dynamic properties of the F2MC pump depend on internal pressure, which can be controlled by a continuously variable transmission between the turbine and generator, allowing the system to be adapted for better performance over a wide range of wave conditions. This work presents a dynamic model for operation and adaptive behavior of this power take-off system, experimentally validates components of the model, and performs dynamic simulations of the system that show increases in power production and capacity factor compared to non-adaptive operation for a variety of driving wave conditions. This work develops the basis for future large-scale experimental testing and controller design of this system.

Wave energy conversion, fluidic flexible matrix co↗
DOE OSTI2020

FICH: Feature instability cavitation history [Slides]

We seek to improve our ability to predict and understand the Richtmyer-Meshkov (RM) unstable dynamics of explosively shocked isolated features interfaced with vacuum or gases, and an HE products cavity. Explosively shocked features form as 2D or 3D RM phenomena. Liquid cavitation cause cavitation bubbles when shockwaves collide, and cavitation waves from wave interactions with isolated features form that source mass into the RM unstable sheets or spikes, and the cavitation waves may slice through bulk material into the HE products cavity.

45 MILITARY TECHNOLOGY, WEAPONRY, AND NATIONAL DEF↗
DOE OSTI2024

Four Channel Time Multiplexed Photonic Doppler Velocimetry using an Optical Switch

Photonic Doppler Velocimetry (PDV) is a diagnostic commonly used in shock physics and dynamic compression experiments to reliably get velocity information from experiments. In PDV systems, a common method of reducing experimental cost is to use time and frequency multiplexing to increase the number of PDV probes. With time multiplexing, interference between probes is a frequent problem. In this report, we look at using a high-speed optical switch to reduce this interference, including measuring the amount of interference generated to determine if it has the potential to affect experiments and integrating a time multiplexing system into an experiment. We find that, when applied to PDV systems, there is approximately (-23.4 ± 0.9) dB of interference measured in the short time Fourier transform between switch inputs. When an optical switch based time multiplexing system was integrated into a dynamic compression experiment, the system was able to successfully combine the signals from four different PDV probes onto a single optical cable without unacceptable levels of interference in the spectrogram. An optical switch based time multiplexing system appears to be a promising method for reducing the cost of fielding larger numbers of PDV probes in an experiment.

47 OTHER INSTRUMENTATION↗
DOE OSTI2023

Simulations of Precessing Jets and the Formation of X-shaped Radio Galaxies

Abstract Jet precession is sometimes invoked to explain asymmetries in radio galaxy (RG) jets and “X/S/Z-shaped” RGs, caused by the presence of a binary black hole companion to the source active galactic nucleus or by accretion instabilities. We present a series of simulations of RG jet precession to examine how these sources would evolve over time, including a passive distribution of cosmic-ray electrons so we can model radio synchrotron emissions and create synthetic radio maps of the sources. We find that a single source viewed from different angles can result in differing RG morphological classifications, confusing physical implications of these classifications. Additionally, the jet trajectories can become unstable due to their own self-interactions and lead to “reorientation events” that may look like the effects of external dynamics such as shocks, winds, or cold fronts in the medium. Finally, something akin to an “Odd Radio Circle” may be observed in the case of viewing the radio remnant of such a precessing source from a line of sight near the precession axis.

79 ASTRONOMY AND ASTROPHYSICS↗
NASA NTRS1985

Quick-Change Holder for Aeronautical-Research Microphones

Mounting holds microphone flush with aircraft surface and maintains pressure seal. Microphones, which measure dynamic pressure and shock waves as they pass over aircraft fuselage or other experimental body, mounted through fuselage flush with outside surface. Besides being faster and easier to use than older mounts, new mount prevents damage to microphone on removal because no sealant to be cut and scraped away.

Cohn, R.↗
NASA NTRS1992

Hybrid simulations of intermediate shocks - Coplanar and noncoplanar solutions

A hybrid code is used to investigate the kinetic structure and stability of subfast intermediate shocks (IS) formed dynamically by the interaction between a flowing plasma and a stationary piston. Results of the kinetic simulation of noncoplanar ISs are compared with predictions of the MHD theory. The relevance of the results of the study to observations of the magnetopause is discussed.

Karimabadi, H.↗
NASA NTRS2003

Modeling the Extended Neutral Atmosphere and Plasma Environment near Saturn

In the three years of this study we have published five papers in refereed journals. We have first examined satellite sources and their contribution to the observed neutral cloud. Based on the total calculated satellite sources and the spatial distribution of sputtered H20, we concluded that they cannot produce observed OH cloud. The E-ring contribution has been also studied in detail.In order to produce observed OH cloud we suggested that the E-ring might be the dominant source in inner Saturnian magnetosphere. We proposed a possible resupply mechanism which is needed to keep both E-ring and OH cloud in the present state: collisions between E-ring grains and remains of a disrupted satellite near Enceladus Lagrangian points. In this scenario a large amount of material, ranging from a few micrometers to hundred of meters, which is optically invisible at present, is likely to exist there. The fourth paper compares the magnetosheaths of the outer planets. A surprising result is that the hot proton component comprises about 40% of the total density, much larger than predicted by shock theory. Gas dynamic models of the boundaries show that the magnetospheres of Jupiter and Saturn are flattened at the poles. The last paper was published in GRL and is the first based of the model of neutrals developed as a main goal of this grant and which is now operational.This Monte Carlo collision code self- consistently determines the neutral distribution. from the rings and satellites until they are lost by ionization, by collisions with rings, moons, or Saturn, or by escape from Saturn. Our model is unique in that it includes the effects of plasma chemistry and both plasma-neutral and neutral neutral collisions to determine the dynamical evolution of the water group neutrals in Saturn's magnetosphere. The lifetimes of the neutrals against loss to photoionization, charge exchange, electron dissociation and electron impact dissociation are based on the model given by (Richardson et al. 1998) and vary with position in the magnetosphere. The dominant neutral dissociation channels H20->OH+H, H20-> O+H2, and OH->O+H2 are considered.

Richardson, John D.↗