Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “sequencer”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 271 records · Page 15
All sourcesNASA NTRSDOE OSTI
DOE OSTI2021

Sequence Impedance Modeling of Grid-Forming Inverters

Grid-forming control of inverter-based resources has been identified as a critical technology for operating power systems with high levels of inverter-based resources. This paper presents the sequence impedance modeling of a grid-forming inverter to evaluate its small-signal stability properties. Droop control structure is implemented to control the inverter in grid-forming mode, and the impact of individual controller on the inverter impedance characteristics is discussed. The developed sequence impedance model is compared with that of the grid-following inverter. It is found from the developed sequence impedance models that grid-forming inverters are less prone to harmonic resonance problems during operation with weaker grids. The developed models are validated using PSCAD simulations.

grid- following inverter↗
DOE OSTI2023

High-Resolution Synthetic Solar Irradiance Sequence Generation: An LSTM-Based Generative Adversarial Network

The rapid growth of renewable energy resources penetration is bringing more challenges to power system planning and operation. Relevant renewable energy integration studies, such as the capability and dynamic performance of inverter-based resources' primary frequency response and fast frequency response, require high-resolution renewable generation output data that are representative of renewable energy resources. This paper focuses on creating synthetic but realistic solar irradiance data and proposes a long short-term memory-based generative adversarial network to generate high-resolution (second-level) solar irradiance sequences from low-resolution (minute-level) measurements. Combined with a classifier to recognize the solar irradiance patterns, the proposed model is trained using multi-loss functions to accurately capture the temporal correlations among both high-resolution and low-resolution sequences. Verification of the proposed approach is performed on the data set of the Oahu Solar Measurement Grid collected through the National Renewable Energy Laboratory. The results of the case studies demonstrate the proposed approach's capability to capture the statistical characteristics of different solar irradiance patterns and to generate high-quality synthetic solar irradiance sequences in high resolution.

dynamic scheduling↗
DOE OSTI2023

A large sequenced mutant library – valuable reverse genetic resource that covers 98% of sorghum genes

SUMMARY Mutant populations are crucial for functional genomics and discovering novel traits for crop breeding. Sorghum , a drought and heat‐tolerant C4 species, requires a vast, large‐scale, annotated, and sequenced mutant resource to enhance crop improvement through functional genomics research. Here, we report a sorghum large‐scale sequenced mutant population with 9.5 million ethyl methane sulfonate (EMS)‐induced mutations that covered 98% of sorghum's annotated genes using inbred line BTx623. Remarkably, a total of 610 320 mutations within the promoter and enhancer regions of 18 000 and 11 790 genes, respectively, can be leveraged for novel research of cis ‐regulatory elements. A comparison of the distribution of mutations in the large‐scale mutant library and sorghum association panel (SAP) provides insights into the influence of selection. EMS‐induced mutations appeared to be random across different regions of the genome without significant enrichment in different sections of a gene, including the 5′ UTR, gene body, and 3′‐UTR. In contrast, there were low variation density in the coding and UTR regions in the SAP. Based on the K a / K s value, the mutant library (~1) experienced little selection, unlike the SAP (0.40), which has been strongly selected through breeding. All mutation data are publicly searchable through SorbMutDB ( https://www.depts.ttu.edu/igcast/sorbmutdb.php ) and SorghumBase ( https://sorghumbase.org/ ). This current large‐scale sequence‐indexed sorghum mutant population is a crucial resource that enriched the sorghum gene pool with novel diversity and a highly valuable tool for the Poaceae family, that will advance plant biology research and crop breeding.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2022

Robust deep learning–based protein sequence design using ProteinMPNN

Although deep learning has revolutionized protein structure prediction, almost all experimentally characterized de novo protein designs have been generated using physically based approaches such as Rosetta. Here, we describe a deep learning–based protein sequence design method, ProteinMPNN, that has outstanding performance in both in silico and experimental tests. On native protein backbones, ProteinMPNN has a sequence recovery of 52.4% compared with 32.9% for Rosetta. The amino acid sequence at different positions can be coupled between single or multiple chains, enabling application to a wide range of current protein design challenges. We demonstrate the broad utility and high accuracy of ProteinMPNN using x-ray crystallography, cryo–electron microscopy, and functional studies by rescuing previously failed designs, which were made using Rosetta or AlphaFold, of protein monomers, cyclic homo-oligomers, tetrahedral nanoparticles, and target-binding proteins.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2020

Complete Genome Sequence of Acidithiobacillus ferridurans JAGS, Isolated from Acidic Mine Drainage

We report a complete genome sequence of Acidithiobacillus ferridurans JAGS, determined using PacBio single-molecule real-time (SMRT) sequencing. The circular genome of JAGS (2,933,811 bp; GC content, 58.57%) contains 3,001 protein-coding sequences, 46 tRNAs, and 6 rRNAs. Predicted genes indicate the potential to fix CO 2 and N 2 and to utilize Fe 2+ , S0, and H 2 as energy sources.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2025

High-quality draft genome sequence of Thermobifida halotolerans DSM 44931

Here, we report the genome sequence of Thermobifida halotolerans DSM 44931, a bacterium that was originally isolated from a salt mine in the Yunnan Province of China. This genome was sequenced using Pacific Biosciences sequencing technology and was assembled into 2 contigs in 2 scaffolds. It has a total length of 5,506,851 bp and a GC content of 71.16%. Functional annotation of this genome provides further metabolic insight into this species.

actinomycete↗
DOE OSTI2023

Integration of SARS-CoV-2 testing and genomic sequencing into influenza sentinel surveillance in Uganda, January to December 2022

The Uganda Virus Research Institute, National Influenza Center laboratory integrated SARS-CoV-2 polymerase chain reaction testing and genomic sequencing into the influenza surveillance program that was established in 2007. A total of 7,698 nasopharyngeal/oropharyngeal (NP/OP) swab samples were collected and analyzed from ILI/SARI sentinel sites across the country from January to December 2022. All samples were tested for influenza and SARS-CoV-2. Of these, 252 (3.3%), 162 (2.1%), and 589 (7.7%) were positive for influenza A, influenza B, and SARS-CoV-2, respectively. Out of 414 influenza-positive samples, 122 (29.5%) were AH1pdm09, 130 (31.4%) were AH3, and 162 (39.1%) were B-Victoria. All SARS-CoV-2 sequenced samples were of the Omicron variant, with subvariants of concern known to evade the immune system being detected, such as BQ.1 and XBB.2. Other SARS-CoV-2 positive samples collected from other health centers in the community outside the surveillance sites were included into SARS-CoV-2 genomic sequencing with similar patterns with respect to variants. In all, the ILI/SARI surveillance system has shown to be an efficient, cost-effective, and sustainable program, providing a ready platform to monitor the circulation of SARS-CoV-2 in communities at the national level while remaining vigilant for the persistent threat of influenza. The integration of SARS-CoV-2 detection and genomic surveillance into the influenza surveillance program will strengthen the laboratory response capacity, as well as facilitate the timely release of SARS-CoV-2 genomic information to be used to complement the multiple response strategies for COVID-19 pandemic mitigation.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2026

High-quality Acinetobacter genomes recovered from combat wounds via metagenomic sequencing resemble cultured isolate genomes

The ability to accurately characterize wound pathogens is critical to informing clinical decisions for wound infections with complex treatment requirements. Acinetobacter baumannii is an impactful nosocomial pathogen in combat wounds and civilian hospital-acquired infections. An informed understanding of the phylogenetics and epidemiology of A. baumannii infections in military and civilian environments could guide approaches that improve antibiotic treatment regimens for both military and civilian patients. Whole-genome data for bacterial strains can be difficult to obtain due to challenges in culturing isolates from preserved military specimens. Metagenomic sequencing and assembly create opportunities for genomic analysis of pathogens directly from clinical specimens. The ability to perform comparative analyses between metagenome-derived genomes and culture-derived genomes would support a range of comparative bacterial genomic studies. Wound tissue biopsy and effluent samples from combat injuries were subjected to metagenomic sequencing and assembly. In total, 42 microbial metagenome-assembled genomes (MAGs) were obtained directly from metagenomic sequence data, 36 of which were designated “high” quality. Thirty of these genomes corresponded to Acinetobacter, with 29 mapping specifically to A. baumannii. Other observed genera included Bordetella, Citrobacter, Escherichia, and Pseudomonas. Single-copy and multi-copy orthologs were identified across Acinetobacter MAGs and publicly available isolate genomes derived from military and civilian sources. Both MAG and military isolate genomes were annotated with antimicrobial resistance data, and MAG genomes were statistically comparable to genomes obtained from isolates. Our results highlight the potential of de novo metagenome assembly for enabling high-resolution characterization directly from clinical specimens, thereby improving diagnostic precision, guiding antimicrobial stewardship, and enhancing understanding of pathogen evolution across diverse healthcare and battlefield environments.

Acinetobacter baumannii↗
DOE OSTI2025

Identification of shared viral sequences in peat moss metagenomes reveals elements of a possible Sphagnum core virome

Viruses are an understudied component of plant microbiomes. Identifying viruses that are shared between individual plants, or members of the “core virome”, could reveal stable viral populations with the potential to modulate the composition and function of the microbiome. Here, we examined the virome associated with Sphagnum mosses, a keystone species that has direct influence over the fate of peatland carbon stores. We analyzed bulk metagenomes and metatranscriptomes generated from Sphagnum field samples collected over a ten-month period to identify virus-like sequences shared among plants. Individual Sphagnum samples harbored distinct DNA and RNA viromes where only a small percentage (< 1%) of the total number of identified viral contigs were shared among all samples. Based on taxonomic classification, the shared viral contigs represent bacterial viruses, or phage (Caudoviricetes), as well as viruses of eukaryotes, namely nucleocytoplasmic large DNA viruses (Nucleocytoviricota) and RNA viruses (Riboviria). We linked the shared phage-like contigs to viral regions within sequenced genomes of bacterial taxa that are members of the Sphagnum core microbiome, suggesting that these contigs represent temperate phage or degraded prophage. The putative nucleocytoplasmic large DNA viruses and RNA viruses were phylogenetically diverse and showed sequence similarity to viruses associated with a broad range of hosts and environmental sources. The identification of shared viral contigs suggested that, despite the compositional heterogeneity between samples, Sphagnum mosses may harbor a core virome. Future work validating the presence of the core virome is warranted as it may aid in understanding how persistent viruses impact microbiome ecology and symbiont evolution within this climatically relevant keystone species.

Metagenomics↗
DOE OSTI2020

The crystal structure of a Polerovirus exoribonuclease-resistant RNA shows how diverse sequences are integrated into a conserved fold

Exoribonuclease-resistant RNAs (xrRNAs) are discrete elements that block the progression of 5' to 3' exoribonucleases using specifically folded RNA structures. A recently discovered class of xrRNA is widespread in several genera of plant-infecting viruses, within both noncoding and protein-coding subgenomic RNAs. The structure of one such xrRNA from a dianthovirus revealed three-dimensional details of the resistant fold but did not answer all questions regarding the conservation and diversity of this xrRNA class. Here, we present the crystal structure of a representative polerovirus xrRNA that contains sequence elements that diverge from the previously solved structure. This new structure rationalizes previously unexplained sequence conservation patterns and shows interactions not present in the first structure. Together, the structures of these xrRNAs from dianthovirus and polerovirus genera support the idea that these plant virus xrRNAs fold through a defined pathway that includes a programmed intermediate conformation. This work deepens our knowledge of the structure-function relationship of xrRNAs and shows how evolution can craft similar RNA folds from divergent sequences.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2022

16S and ITS Amplicon Sequencing Fastq files and metadata from PARCHED Panama Tropical Forest soils, 2019-2020,

Model projections predict tropical forests will experience longer periods of drought and more intense precipitation cycles under a changing climate. Such transitions have implications for structure-function relationships within microbial communities. We examine how chronic drying might reshape prokaryotic and fungal communities across four lowland forests in Panama with a wide variation in mean annual precipitation and soil fertility. Four sites were established across a 1000 mm span in mean annual precipitation (2335 to 3300 mm). We expected microbial communities at sites with lower MAP to be less sensitive to chronic drying than sites with higher MAP; while fungal communities to be more resistant to disturbance than prokaryotes. At each location, partial throughfall exclusion structures were established over 10 x 10 m plots to reduce direct precipitation input. Raw demultiplexed sequences (bacteria, archaea, fungal) from soil samples taken from PARCHED Panama Tropical Forest throughfall exclusion experiments. Files that contain 16S are sequences from prokaryotes, ITS indicates sequences from fungi. Compressed fastq files are contained in Field_PARCHED_ITS_fastq_2020.zip, Field_PARCHED_ITS_fastq_2019.zip, Field_PARCHED_16S_fastq_2020.zip, Field_PARCHED_16S_fastq_2019.zip.There are four sites across the isthmus of Panama, each with 4 control and 4 exclusion plots. Throughfall exclusion shelters were built to intercept 50% of throughfall precipitation that hits the soil. Samples were taken on May 2019 and Jan 2020 from 0-10 cm and 10-20 cm depth approximately 9 and 18 months after shelter installation. Metadata and sample IDs for fastq files for 2019 sampling are within Field_PARCHED_Metadata_2019_ITS.csv and Field_PARCHED_Metadata_2019_16S.csv. The metadata for both 16S and ITS fastq files for January 2020 is included in Field_PARCHED_Metadata_2020.csv. No data processing or QA/QC was done on the raw data. Data processing example provided in R notebook file.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2023

Complete sequences of conjugal helper plasmids pRK2013 and pEVS104

We present the complete sequences of two commonly used conjugal helper plasmids: pRK2013 and pEVS104. These sequences will enable engineering of custom helper plasmids, for example, with different antibiotic markers or origins of replication. We provide both sequence information and plasmid maps to aid future engineering efforts.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2026

Lessons from the IEC Durability of Adhesion Accelerated Test Sequence

The IEC 62788-1-1 and IEC 63209-2 standards use aging sequences for durability of adhesion in photovoltaic (PV) modules, which may be evaluated using the single cantilever beam (SCB) test. Because the encapsulant forms critical interfaces with the front glass and solar cells, degradation at those interfaces under ultraviolet (UV) exposure, elevated temperature, and humidity can lead to interfacial delamination - compromising the long-term reliability. In this work, adhesion durability of UV-transmitting poly(ethylene-co-vinyl acetate) (EVA) encapsulant to glass and to silicon solar cells is evaluated after sequenced UV and damp heat aging (85C/85%RH). Laminates were prepared using StarPhire solar front glass with thin glass or PERC cells, and two EVA formulations with different concentrations of siloxane coupling agent. Adhesion was quantified by measuring critical debond energy using the SCB method. Both formulations exhibit similar qualitative trends, while different adhesion is observed at the periphery despite the use of low-shrink manufacturing. The results show that while glass/EVA adhesion remains stable or increases after UV exposure and shows only moderate changes after damp heat, the EVA/cell interface exhibits an irreversible loss of adhesion following UV and then damp heat exposure. Although glass/EVA interfaces generally exhibit lower debond energies, the EVA/cell interface is significantly more vulnerable to UV-driven degradation, identifying it as the dominant reliability risk location through early- and intermediate-module life. These results demonstrate that accelerated aging sequences can expose large, interface-specific losses in adhesion durability and underscore the importance of interface engineering for long-term PV module reliability.

14 SOLAR ENERGY↗
DOE OSTI2022

UAE6 - Wind Tunnel Tests Data - UAE6 - Sequence Q - Raw Data

Sequence Q: Dynamic Inflow (P) This sequence was designed to characterize the dynamic inflow variation using the five-hole probes that extend upwind of the leading edge of the blade. This test sequence used an upwind, rigid turbine with a 0° cone angle. The wind speeds ranged from 5 m/s to 15 m/s, and data were collected at a 0° yaw angle. The rotor rotated at 72 RPM. Blade and probe pressure measurements were collected. The teeter dampers were replaced with rigid links, and these two channels were flagged as not applicable by setting the measured values in the data file to -99999.99 Nm. The teeter link load cell was pretensioned to 40,000 N. The blade pitch angle was changed from the initial tip pitch angle to the final tip pitch angle at the maximum rate of 67°/s. This angle was maintained for the specified delay time duration. Then the blade was pitched back to the initial pitch angle and held for the specified hold time. This was repeated 20 times. The campaign at 15 m/s was aborted early due to excessive low-speed shaft torque loads. The file length varied depending on the time required to obtain 20 pitch cycles for the specified range of angles. The name convention was the standard format, except for the short campaigns collected to ascertain the functionality of the instrumentation. These points were collected at a 3° pitch angle and use the characters REF in the four digits that normally represent yaw angle.

17 WIND ENERGY↗
DOE OSTI2022

UAE6 - Wind Tunnel Tests Data - UAE6 - Sequence 3 - Raw Data

Sequence 3: Tower Wake Measure (P) Sequence 3 used a downwind, rigid turbine with a 3.4° cone angle. The wind speeds for this sequence corresponded to subcritical [7 m/s], transitional [15 m/s], and supercritical [20 m/s] Reynolds number regimes for the circular cross-section tower. The yaw angle and blade tip pitch angles were selected to traverse the probe tip across the tower wake, while keeping the probe axis approximately parallel to the tunnel centerline. The rotor was parked with the instrumented blade at 180° azimuth. Blade and probe pressure measurements were collected.

17 WIND ENERGY↗
DOE OSTI2022

UAE6 - Wind Tunnel Tests Data - UAE6 - Sequence 4 - Raw Data

Sequence 4: Static Pressure Calibration (P) This test sequence used a downwind, teetered turbine with a 3.4° cone angle. The wind speed ranged from 5 m/s to 25 m/s. Yaw angles of 0° to 30° were achieved. The blade tip pitch was 3°. The rotor rotated at 72 RPM. Blade and probe pressure measurements were collected. A static pitot probe was installed on a boom 2.3 m upwind of the nacelle at hub height and connected to the reference side of the Mensor digital differential pressure transducer through the pneumatic rotary coupling. This provided the reference pressure for all blade-mounted pressure transducers, as opposed to the NASA atmospheric pressure reference that was used for all other test sequences. This simulates the pressure system connections used in field measurements where the static pressure was unknown.

17 WIND ENERGY↗
DOE OSTI2022

UAE6 - Wind Tunnel Tests Data - UAE6 - Sequence 6 - Raw Data

Sequence 6: Shroud Wake Measure (P) This test sequence used a downwind, rigid turbine with a 3.4° cone angle. The wind speeds for this sequence corresponded to subcritical [7 m/s], transitional [15 m/s], and supercritical [20 m/s] Reynolds number regimes for the circular cross-section tower. The yaw angle and blade tip pitch angles were selected to traverse the probe tip across the tower wake while keeping the probe axis approximately parallel to the tunnel centerline. The rotor was parked with the instrumented blade at 180° azimuth. Blade and probe pressure measurements were collected. An airfoil-shaped aluminum shroud was placed on the tower below the 34% span five-hole probe. It extended below the 91% span five-hole probe. The turntable angle was adjusted to position the shroud at various angles relative to the flow.

17 WIND ENERGY↗