Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “scope”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 271 records · Page 15

Defense Waste Processing Facility (DWPF) Glycolate Mitigation: Scoping Test Results

A series of initial reactions were performed at SRNL with the goal of arriving at a general understanding of the conditions required to destroy glycolate. A simulant solution representing a composite of the Recycle Condensate Tank (RCT), the Slurry Mix Evaporator Condensate Tank (SMECT), and/or the Off-Gas Condensate Tank (OGCT) was prepared. Two oxidizers were used, hydrogen peroxide and sodium permanganate. Ten tests and a control reaction were performed. The temperature was not controlled, but remained in the range of 18-21 °C. The initial glycolate concentrations were nominally either 250 or 2000 ppm. The test volume was 500 mL and stirring was provided by a magnetic stirrer.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Solar Economies of Scope through the Intersection of Four Industries: PV Installation, Electrical, Construction, and Roofing

The U.S. solar photovoltaic (PV) installation industry largely grew from pre-existing industries that provide related services such as electrical contracting, construction, and roofing. In this report, we use a new data set based on data from the California Contractors State License Board (CSLB) to explore the ties between PV installation and these related-service industries. Based on a study period of 2010 to 2016, the CSLB data show that most PV installers hold some license other than the license designed specifically for PV installation, primarily electrical and construction licenses. Indeed, only about 9% of PV installers hold only the solar contractor license. The fact that most PV installers hold electrician and construction licenses illustrates the important ties between PV installation and these industries. The CSLB data, combined with residential PV price data, also show that installers with multiple non-solar licenses are associated with lower-priced systems. These findings suggest that installers with multiple skillsets may be able to reduce PV installation costs. Further, the data show that PV systems are lower-priced when installed during new construction, especially when new-construction systems are installed by licensed roofers.

14 SOLAR ENERGY↗

Broad Scope Analysis of the MOX Fuel Fabrication Facility and Disposition of Plutonium

The Plutonium Management and Disposition Agreement (PMDA), signed into effect in 2000, between the United States and Russia, was made in a post-Cold War effort to dispose of military-useable material, a combined 68 metric tons of weapon-grade plutonium. The United States has been pursuing a disposition path through conversion to MOX fuel for use in current commercial nuclear reactors. The Savannah River Site’s (SRS) MOX Fuel Fabrication Facility (MFFF, the MOX facility) began construction in 2007 with intent to uphold the United States’ half of the agreement. In the FY2017 budget, the Obama administration proposed a termination of the MFFF after lack of sufficient funding to the project, which caused paralyzing delays and drastically inflated costs for completion. Prolonged construction, piled costs, and divergent policies between shifting administrations have resulted in turmoil between the United States and Russia, culminating with the proposed abandonment of the MOX disposition path and being used as a justification by Russia to withdraw from the agreement until the United States is able to identify a clear plan, fulfilling the requirements set forth by the PMDA. The leading expedient to replace MOX fuel is the dilute and dispose method, which leaves uncertainty for the SRS MFFF and places reliance on New Mexico’s Waste Isolation Pilot Plant (WIPP) to legally accommodate the additional and unaccounted waste. If the current capacity of WIPP proves insufficient, construction of a new repository for transuranic waste would only incur additional costs and regulatory burdens, along with extreme schedule delays. Future proposed adaptations of the SRS MFFF include pit production, which would require complex and costly alterations to be operational at the current site. Restrictions from Congress, such as mandating the proposed solution to abandoning MFFF must equal half of the costs required for completing the facility, have fueled severely underestimated quotations of these alternatives. The increasing pressure from both Russia and South Carolina government officials to make a decision could result in the pursuit of another doomed project, leaving the United States with even further sunk costs and strained international relations. This paper will summarize the involved history of the MFFF, explicate the recourses to salvage the facility for pit production, and provide postulation on the dilute and dispose method.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Alternate Design Concepts for the High Flux Isotope Reactor using Low-Enriched Uranium Fuel Systems: Scoping Analysis

The Oak Ridge National Laboratory (ORNL) High Flux Isotope Reactor (HFIR) is a multi-mission research reactor dedicated mainly to isotope production, neutron scattering experiments, material irradiation, testing and activation. In the framework of non-proliferation policies, the international community is currently aiming to reduce or even eliminate, when and where possible, the use of Highly Enriched Uranium (HEU: 235 U/U ≥ 20 wt. %) in civilian applications. In that context, most research reactors worldwide still operating with HEU fuel are actively engaged in an effort to convert to Low Enriched Uranium fuel system (LEU: 235 U/U < 20 wt. %). Within the US, the High Performance Research Reactor (USHPRR) fleet (which includes HFIR) is expected to convert to LEU fuel using the UMo “monolithic” fuel system currently under development. ORNL is responsible for the development of a LEU design for HFIR. In the past years, Argonne National Laboratory (ANL) offered technical assistance to the ORNL LEU design team whenever deemed appropriate. Due to their complex nature, acceptable HFIR LEU designs identified so far, all based on the UMo monolithic fuel system, would require a substantial fabrication development effort before being proven commercially viable. In order to mitigate technical risks and reduce cost/schedule uncertainties, it appears appropriate to study alternate design solutions and alternate fuel systems as possible backup options for the HFIR conversion to LEU fuel. In that context, ANL has been exploring alternate design concepts for HFIR. Complementing the ORNL design activities, the goal is to find the best design solution for HFIR in term of cost, performance and safety. The present report summarizes the findings regarding two types of alternate conceptual design: U 3 Si 2 designs and un-contoured UMo design. Based on available tools and methods, preliminary analysis show that both concepts could probably meet performance and steady-state safety requirements but element fabrication would remain complex and would require a non-trivial fabrication development effort.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

Scoping Studies to Determine Impact of a Low-Alkali Phase Separated Frit on the Behavior of the Frit Slurry and Slurry Mix Evaporator Rheology

The frits used in the vitrification process at the Defense Waste Processing Facility (DWPF) are alkali borosilicate glasses, which are composed mainly of B 2 O 3 , alkali (Li 2 O and Na 2 O) and SiO 2 . As the total alkali concentration in a borosilicate glass is reduced, liquid-liquid immiscibility is exhibited by the glassforming melt, which is analogous to the behavior of oil and water. Upon cooling, the resulting glass matrix is said to be phase separated. The immiscible region is controlled by both composition and temperature. Viscosity of the melt is also a factor as it impacts the reaction rate (kinetics) of phase separation. The reaction rate (kinetics) leading to phase separation is slow for higher viscosity melts, and if such a melt is cooled rapidly (e.g., quenched in water), the resulting glass could be homogeneous, or the scale of the phase separated microstructure could be of no practical significance. Phase separated alkali borosilicate glasses tend to form a more durable silica-rich phase and a less durable alkali borate-rich phase. The overall durability of the phase separated glass depends on the morphology (physical arrangements) of each of these phases. For example, droplets of the alkali borate-rich phase may form within a silicate rich matrix, which would be a more durable glass than a glass with an interconnected alkali borate-rich phase.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

A Limited-In-Scope Comparison of Subsidence Scenarios For 3D Vadose Zone PORFLOW Trench Models

This technical memorandum summarizes the results from two separate sequences of 3D PORFLOW vadose zone flow and contaminant transport models that were used to test the impact of different spatial distributions of subsidence boundary conditions. More specifically, the two simulation setups used a general conceptual model for an engineered trench (ET): one with a subsided region specified in the center of the trench and one with a subsided region located at the end of the trench. Both subsided regions had the same geometric specifications (e.g., length, width, orientation), but used water infiltration rate boundary conditions that appropriately accounted for surface runoff and lateral drainage from the adjacent upslope intact regions of the final closure cap. Because of the substantially higher water infiltration rate associated with the subsided region at the end of the trench, this geometry produced higher absolute peak fluxes to the water table for all six radionuclides that were simulated. However, the slower release rate of the centrally located subsided hole geometry produced a higher flux to the water table in the time period subsequent to the absolute peak. A third model was implemented as a control, where the water infiltration rate that corresponds to the centrally located subsided region was applied at the end of the trench to highlight the purely geometric effects. The results show that a higher water infiltration rate produces a sharper peak, while a lower infiltration rate leads to a broader peak. A centrally located hole impacts more of the waste zone, producing a higher peak when an equal infiltration rate is applied. These generalized qualitative differences, and their impacts on the overall modeling workflow (i.e., from vadose zone models to limits and dose calculations), should receive appropriate consideration during the development of conceptual models.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Nuclear Thermal Propulsion Scoping Analysis of Fuel Plate Core Configurations

Nuclear thermal propulsion (NTP) engines use a nuclear reactor to heat up hydrogen to high temperatures. Thrust is generated as the hydrogen is ejected at high velocity through a nozzle. NTP has the potential of reducing travel times for deep space missions, such as to Mars. The United States studied NTP early in the space age and the National Aeronautics and Space Administration (NASA) is currently revisiting the potential of the technology to enable its missions.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Gen3CSP sCO2 Loop Scope of Supply (V0.0.3)

The Generation 3 Concentrating Solar Power (Gen3CSP) supercritical carbon dioxide (sCO 2 ) coolant loop, typically referred to here as the `sCO 2 loop,' is designed to continuously remove heat from a primary heat exchanger (PHX) subsystem through a flow of sCO 2 as a substitute for a sCO 2 Brayton power cycle as shown in Figure 1-1. This system is designed to function as a pumped coolant loop operating at a high baseline pressure with a high degree of flexibility, stability, and autonomy to simplify operation of a Gen3CSP Topic 1 team Phase 3 pilot plant. The complete system includes a dedicated inventory management module to fill the main flow loop with CO2 and recovery CO2 during heating and venting operations to minimize the delivery of CO2 to the site.

20 FOSSIL-FUELED POWER PLANTS↗

Multiphysics Simulation of DPC Criticality: Scoping Calculations and Coupling Strategy.

Objectives for Multi-Physics Simulations include: Provide a systematic framework for multi-process modeling — Conduct parallel model development efforts that cover the technical areas needed to support criticality consequence screening in performance assessment (PA) and that will be more closely integrated as development proceeds; Investigate separate effects — Allow partitioning of the overall waste package (WP) internal criticality multi-physics modeling effort during development activities, for study of specific processes that can later be coupled if warranted from interpretation of results; Study scaling and bounding approaches — Where possible, represent criticality consequences in PA using simplification of uncertain criticality event frequency and magnitude, bounding of consequences for screening purposes, and scaling of consequences to multiple WPs; and, Integration among participants — Multiple modeling teams (mainly SNL and ORNL, and their collaborators) will work on different parts of the in-package criticality phenomenology. Insights generated this way will be combined for more realistic coupled modeling, and for validation.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Design Verification for Deep Boreholes. A Scoping Study.

Deep borehole disposal (DBD) has been suggested as an option for disposing spent nuclear fuel in a number of countries, including several countries that are subject to international safeguards. DBD presents some distinct challenges for safeguards compared to a conventional mined geological repository (MGR), including the ability to verify declared design information about the borehole. The ability to verify a borehole's design is crucial for assuring that spent fuel or other accountable nuclear materials are disposed as declared in a borehole of known and verifiable design. This study reviews existing commercial off-the-shelf (COTS) borehole inspection tools currently used by the drilling industry, and evaluates the capabilities of those COTS inspection tools against how well they can meet potential needs and requirements of Design Information Verification (DIV) inspections for international safeguards. The study provides recommendations for several promising COTS borehole inspection tools that might be used for DIV safeguards inspections and recommends possible modifications and future testing

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

WEC Optimization Tool Scoping Report

This report details the background, design, and initial results for wave energy converter design optimization tool. This tool is intended to provide researchers and developers with a means of optimizing existing wave energy converter designs by including realistic dynamics and control algorithms early in the design cycle.

16 TIDAL AND WAVE POWER↗

Expanding the Scope of Commercial Opportunities for Investor-Owned Electric Utilities

Technological advances and a more engaged customer population are pushing utilities and their regulators towards new strategies that promote growth and transformation. Common to many of these efforts is an interest in expanding the set of profit-generating product and service offerings, hereafter referred to as alternative commercial opportunities, beyond just buying and selling electricity. Prior work has focused on specific categories and types of alternative commercial opportunities and in specific market segments. The report fills an important gap in the literature in two ways. First, we develop a comprehensive taxonomy to categorize the alternative commercial opportunities and provide numerous examples within each category. Second, we identify six issues that regulators may want or need to address when determining if and how investor-owned electric utilities pursue these commercial opportunities. The work is intended to inform regulators and decision-makers about how to navigate these broader reform opportunities, as well as rationalize their response within the context of their state policy strategy and in comparison to their peers in other states.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗

A Scoping Study to Develop a Computational Fluid Dynamics Based Model to Predict Radiological Materials Packaging Temperatures within a Generic Staging Building

The objective of this work is to perform computational fluid dynamics simulations of a ventilated radiological-material-package staging building to determine the effect of including or excluding a variety of physical effects and computational methods on both the predicted package temperatures and required computational resources. The generic building contains 640 drum-packages containing heat-generating, radiological material supported on four racks that are eight levels tall. Additionally, there is a forced ventilation system, lighting, and insulated walls. Computational models were constructed that included or excluded (a) shelving, (b) effects of unsteadiness, and (c) radiation heat transfer. Simulations with each drum modeled separately were compared to simpler simulations with sets of four drums represented by an equivalent box-package. These models employed between 106 to 107 elements. Steady state simulations predicted package temperatures that were within 0.1°C of simulations that included transient effects and required only one-eighth the computational resources. Calculations that excluded shelving predicted temperatures within 0.6°C of simulations that included shelving and required one-fourth the computational resources. Excluding radiation heat transfer systematically increased temperatures by around 1.5°C but reduced computational resources by a factor of four. The box-package model reduced the computational resources by a factor of 3, but systematically predicted higher temperatures by around 1.1°C. These results will be used to develop an efficient computational fluid dynamics model to assess the ability of different staging building designs to prevent the temperature of package components from exceeding specified limits.

42 ENGINEERING↗

DPC Disposal Thermal Scoping Analysis

This is a progress report on thermal modeling for dual-purpose canister (DPCs) direct disposal that covers several available calculation methods and addresses creep and temperature-dependent properties in a salt repository. Three modeling approaches are demonstrated: A semi-analytical calculation method that uses linear solutions with superposition and imaging, to represent a central waste package in a larger array; A finite difference model of coupled thermal creep, implemented in FLAC2D; and An integrated finite difference thermal-hydrologic modeling approach for repositories in different generic host media, implemented in PFLOTRAN. These approaches are at different levels of maturity, and future work is expected to add refinements and establish the best applications for each.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Refueling Infrastructure Scoping and Feasibility Assessment for Hydrogen Rail Applications

The feasibility and component cost of hydrogen rail refueling infrastructure is examined. Example reference stations can inform future studies on components and systems specifically for hydrogen rail refueling facilities. All of the 5 designs considered assumed the bulk storage of liquid hydrogen on-site, from which either gaseous or liquid hydrogen would be dispensed. The first design was estimated to refuel 10 multiple unit trains per day, each train containing 260 kg of gaseous hydrogen at 350 bar on-board. The second base design targeted the refueling of 50 passenger locomotives, each with 400 kg of gaseous hydrogen on-board at 350 bar. Variations from this basic design were made to consider the effect of two different filling times, two different hydrogen compression methods, and two different station design approaches. For each design variation, components were sized, approximate costs were estimated for major components, and physical layouts were created. For both gaseous hydrogen-dispensing base designs, the design of direct-fill using a cryopump design was the lowest cost due to the high cost of the cascade storage system and gas compressor. The last three base designs all assumed that liquid hydrogen was dispensed into tender cars for freight locomotives that required 7,500 kg of liquid hydrogen, and the three different designs assumed that 5, 50, or 200 tender cars were refueled every day. The total component costs are very different for each design, because each design has a very different dispensing capacity. The total component cost for these three designs are driven by the cost of the liquid hydrogen tank; additionally, delivering that much liquid hydrogen to the refueling facility may not be practical. Many of the designs needed the use of multiple evaporators, compressors, and cryopumps operating in parallel to meet required flow rates. In the future, the components identified here can be improved and scaled-up to better fit the needs of heavy-duty refueling facilities. This study provides basic feasibility and first-order design guidance for hydrogen refueling facilities serving emerging rail applications.

08 HYDROGEN↗

LANL Weapons Physics Directorate: Mission Scope and Opportunities [Slides]

The Weapons Physics Directorate stewards a number of critical capabilities to meet the LANL mission. To execute our mission, ALDX develops and applies cutting-edge theory, computational models and multi-physics simulation codes, and designs, executes, and analyzes complex experiments. Our mission is to sustain the current stockpile, provide future stockpile options, and help shape a globalized nuclear world.

45 MILITARY TECHNOLOGY, WEAPONRY, AND NATIONAL DEF↗