Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “ring model”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 271 records · Page 15

Topology of Saturn's main magnetic field

The reported analysis of Saturn's main magnetic field takes into account the data obtained by Voyager 1 during its close flyby of Saturn in November 1980. A magnetic field model for the analysis of Saturn's main field in which the distributed ring currents are explicitly modelled is constructed. The considered internal field parameters constitute a first approximation to Saturn's main field. Several model current systems that might be expected on physical grounds to be active in Saturn's magnetosphere are considered. It is pointed out that certain aspects of Saturn's main magnetic field relevant to the planet's interior have been discussed by Stevenson (1980). In particular, the unexpectedly small dipole moment seems to be consistent with the gravitational settling of helium, which leads to a much smaller electrically conducting and convecting region than would be expected of a homogeneous distribution of hydrogen and helium.

Acuna, M. H.↗

Seal development activities at Allison Turbine Division

Brush seals are being evaluated for potential near and far term gas turbine engine applications. Development is in the form of rig component testing and engine testing. Allison has tested an engine with 20 individual brush seal positions. These seals were located throughout the engine. The emphasis of the current work is on obtaining long term performance data for brush seals. Very little of this data is available. Allison is presently developing film riding face seal technology to support future gas turbine engine applications. A face seal with an approximate 7 inch diameter was successfully tested to 1000 F, 100 psid, and 650 ft/sec. Seal leakage remained below 1 scfm throughout the duration of the test. A model for the compressible gas film was developed which separates the model for the compressible gas film was developed which separates the primary seal rings during operation. This model is based on the traditional Reynold's approach which is customarily applied to lubrication type problems. Because of the difficulty of experimentally verifying the program predictions, a commercial Navier-Stokes code was used in parallel. By comparing predictions for similar cases, it is expected that the limitations of the Reynold's model can be assessed as it applies to this particular seal.

Munson, John↗

Rapid Rebuilding of the Outer Radiation Belt

Recent observations by the radiation monitor (RDM) on the spacecraft Akebono have shown several cases of greater than 2.5 MeV radiation belt electron enhancements occurring on timescales of less than a few hours. Similar enhancements are also seen in detectors on board the NOAA/POES and TWINS 1 satellites. These intervals are shorter than typical radial diffusion or wave-particle interactions can account for. We choose two so-called "rapid rebuilding" events that occur during high speed streams (4 September 2008 and 22 July 2009) and simulated them with the Space Weather Modeling Framework configured with global magnetosphere, radiation belt, ring current, and ionosphere electrodynamics model. Our simulations produce a weaker and delayed dipolarization as compared to observations, but the associated inductive electric field in the simulations is still strong enough to rapidly transport and accelerate MeV electrons resulting in an energetic electron flux enhancement that is somewhat weaker than is observed. Nevertheless, the calculated flux enhancement and dipolarization is found to be qualitatively consistent with the observations. Taken together, the modeling results and observations support the conclusion that storm-time dipolarization events in the magnetospheric magnetic field result in strong radial transport and energization of radiation belt electrons.

Glocer, A.↗

Geospace Environment Modeling 2008-2009 Challenge: Ground Magnetic Field Perturbations

Acquiring quantitative metrics!based knowledge about the performance of various space physics modeling approaches is central for the space weather community. Quantification of the performance helps the users of the modeling products to better understand the capabilities of the models and to choose the approach that best suits their specific needs. Further, metrics!based analyses are important for addressing the differences between various modeling approaches and for measuring and guiding the progress in the field. In this paper, the metrics!based results of the ground magnetic field perturbation part of the Geospace Environment Modeling 2008 2009 Challenge are reported. Predictions made by 14 different models, including an ensemble model, are compared to geomagnetic observatory recordings from 12 different northern hemispheric locations. Five different metrics are used to quantify the model performances for four storm events. It is shown that the ranking of the models is strongly dependent on the type of metric used to evaluate the model performance. None of the models rank near or at the top systematically for all used metrics. Consequently, one cannot pick the absolute winner : the choice for the best model depends on the characteristics of the signal one is interested in. Model performances vary also from event to event. This is particularly clear for root!mean!square difference and utility metric!based analyses. Further, analyses indicate that for some of the models, increasing the global magnetohydrodynamic model spatial resolution and the inclusion of the ring current dynamics improve the models capability to generate more realistic ground magnetic field fluctuations.

Pulkkinen, A.↗

The rings of Uranus

Stellar occultation data on the Uranian rings are summarized. Spatial resolution is 0.1 km, for positions of ring segments, 4 km for structural details. The system consists of 9 narrow rings with average geometric albedo of 0.02. The data are well fitted by a kinematic model that describes the rings as ellipses, inclined to the equatorial plane of Uranus and precess due to harmonic terms in the Uranian potential fields. The main characteristics of the Uranian ring system that need a confirmed theoretical explanation are: narrow rings; sharp edges; uniform orbital precession; origin of the eccentricities and inclinations; the structure of the epsilon ring; the structure of the eta ring; and the origin of the ring system.

Elliot, J. L.↗

Saturn's rings: Particle composition and size distribution as constrained by microwave observations. I - Radar observations

The radar backscattering characteristics of compositional and structural models of Saturn's rings are calculated and compared with observations of the absolute value, wavelength dependence, and degree of depolarization of the rings' radar cross section (reflectivity). The doubling method is used to calculate reflectivities for systems that are many particles thick using optical depths derived from observations at visible wavelengths. If the rings are many particles thick, irregular centimeter- to meter-sized particles composed primarily of water ice attain sufficiently high albedos and scattering efficiencies to explain the radar observations. In that case, the wavelength independence of radar reflectivity implies the existence of a broad particle size distribution; a narrower size distribution is also a possibility. Particles of primarily silicate composition are ruled out by the radar observations. Purely metallic particles may not be ruled out on the basis of existing radar observations. A monolayer of very large ice 'particles' that exhibit multiple internal scattering may not yet be ruled out.

Cuzzi, J. N.↗

The radii of Uranian rings alpha, beta, gamma, delta, epsilon, eta, 4, 5, and 6 from their occultations of SAO 158687

All available timing data for the occultations of SAO 158687 on March 10, 1977, by the cited rings of Uranus are analyzed. Least-squares fits to the data are performed using a model which postulates that rings alpha, beta, gamma, and delta are circular and coplanar. A solution obtained under the assumption that the ring plane coincides with the plane of the satellite orbits is adopted which yields radii of 44,844 km for ring alpha, 45,799 km for ring beta, 47,746 km for ring gamma, and 48,423 km for ring delta. The uncertainties in these values are discussed along with the apparent shapes and inclinations of these main rings. The mean radii estimated for the other rings are: 47,323 km for ring eta, 42,663 km for ring 4, 42,360 km for ring 5, and 41,980 km for ring 6.

Elliot, J. L.↗

Inclinations of the Uranian rings

It is theoretically shown that at least seven of the nine rings of Uranus have orbits inclined to the equatorial plane of the planet. To the existing model of the Uranian rings, free parameters for the inclination of the rings and for the angle between the line of nodes of the ring orbit and a common reference line in the equatorial plane were added. An available set of occultation timings and expressions for the precession and nodal regression were combined, and an excellent fit was obtained.

French, R. G.↗

Lower hybrid drift instability at the inner edge of the ring current

Excitation of electrostatic waves around and above the lower hybrid frequency at the inner edge of the ring current is investigated. The model consists of cold plasmaspheric ions; hot, dilute, inhomogeneous ring current ions; and cold charge neutralizing electrons. It is shown that in the presence of a sufficiently large density gradient the coupling of the lower hybrid with the drift cyclotron harmonic mode destabilizes the plasma. Unstable interactions also occur at higher cyclotron harmonics when the lower hybrid is replaced by an ion Bernstein mode. Additional power at frequencies above the lower hybrid frequency is attributed to the thermal enhancement by the hot ring current ions, which increases with their density gradient. Particle simulations are conducted, and comparison to AMPTE data is discussed.

Roth, I.↗

Multiphysics Modeling of a Single Channel in a Nuclear Thermal Propulsion Grooved Ring Fuel Element

In the past, fuel rods have been used in nuclear propulsion applications. A new fuel element concept that reduces weight and increases efficiency uses a stack of grooved discs. Each fuel element is a flat disc with a hole on the interior and grooves across the top. Many grooved ring fuel elements for use in nuclear thermal propulsion systems have been modeled, and a single flow channel for each design has been analyzed. For increased efficiency, a fuel element with a higher surface-area-to-volume ratio is ideal. When grooves are shallower, i.e., they have a lower surface area, the results show that the exit temperature is higher. By coupling the physics of turbulence with those of heat transfer, the effects on the cooler gas flowing through the grooves of the thermally excited solid can be predicted. Parametric studies were done to show how a pressure drop across the axial length of the channels will affect the exit temperatures of the gas. Geometric optimization was done to show the behaviors that result from the manipulation of various parameters. Temperature profiles of the solid and gas showed that more structural optimization is needed to produce the desired results. Keywords: Nuclear Thermal Propulsion, Fuel Element, Heat Transfer, Computational Fluid Dynamics, Coupled Physics Computations, Finite Element Analysis

Kim, Tony↗

Energetic neutral atom image of a storm-time ring current

Energetic neutral atom (ENA) images of a storm-time ring current produced from direct measurements and model simulations are presented and analyzed. An ENA image of the storm-time ring current was obtained with the Medium Energy Particles Instrument (MEPI) mounted on ISEE 1 on September 29, 1978, and a zero-order model of the ring current ion was employed to simulate the ENA image. The simulated instrument response is compared with actual ENA measurements. It is observed that the spatial distribution of singly charged ions detected from the ENA images displays equatorial midnight/noon asymmetry in differential ion intensity with a midnight/noon ratio of greater than or equal to 20:1; peak ion fluxs, H(+) and O(+), in the midnight sector are greater than 10 to the 6th/(sq cm s sr keV); and ENA fluxes from the brighter areas of the image exceed greater than 1000/(sq cm s sr keV). It is noted that the ENA image from MEPI data correlates with the morphology of the simulated response of MEPI calculated from the model.

Roelof, Edmond C.↗

Saturn's microwave spectrum: Implications for the atmosphere and the rings

Measurements of Saturn's disk temperature are compiled to determine the planet's microwave spectrum from 1 mm to 100 cm wavelength. The data were adjusted to conform with a common flux density scale. A model of Saturn's rings is used to remove the effects of the rings from the atmospheric component at centimeter and decimeter wavelengths. Theoretical spectra for a number of convective atmospheric models were computed and compared with the observed spectrum. Radiative-convective models with approximately solar composition and with an effective temperature of approximately 89 K are in good agreement with the observations. The agreement between the observed and theoretical spectra is a strong indication that gaseous ammonia is present in Saturn's atmosphere. A good fit to the data is obtained with an ammonia mixing ratio of approximately 5 x 10,0001. A comparison of the millimeter wavelength data with the best-fitting atmospheric spectrum indicates that the thermal component of the ring brightness temperature near 1 mm wavelength is approximately 25 k.

Klein, M. J.↗

The plasma environment, charge state, and currents of Saturn's C and D rings

The charge state and associated currents of Saturn's C an D rings are studied by modeling the flow of ionospheric plasma from the mid- to low-latitude ionosphere to the vicinity of the rings. It is found that the plasma density near the C and D rings, at a given radial location, will experience a one to two order of magnitude diurnal variation. The surface charge density (SCD) of these rings can show significant radial and azimuthal variations due mainly to variation in the plasma density. The SCD also depends on structural features of the rings such as thickness and the nature of the particle size distribution. The associated azimuthal currents carried by these rings also show large diurnal variations resulting in field-aligned currents which close in the ionosphere. The resulting ionospheric electric field will probably not produce a significant amount of plasma convection in the topside ionosphere and inner plasmasphere.

Wilson, G. R.↗

Orbits of nine Uranian rings

Observations of a stellar occultation by Uranus and its nine rings are presented and used to examine the structures and kinematics of the rings. The observations of the occultation of the K giant star KM 12 were obtained in the K band with the 4-m CTIO telescope at a signal-to-noise ratio higher than any previously obtained. Ring occultation profiles reveal the alpha ring to possibly have a double structure and less abrupt boundaries than the gamma ring, which exhibits diffraction fringes, while the eta ring is a broad ring with an unresolved narrow component at its inner edge. The present timing data, as well as previous occultation timings, are fit to a kinematic model in which all nine rings are treated as coplanar eclipses of zero inclination, precessing due to the zonal harmonics of the Uranian gravitational potential to obtain solutions for the ring orbits. Analysis of the residuals from the fitted orbits reveals that the proposed model is a good representation of ring kinematics. The reference system defined by the orbit solutions has also been used to obtain a value of 0.022 + or - 0.003 for the ellipticity of Uranus and a Uranian rotation period of 15.5 h.

Elliot, J. L.↗

The Ring Current

It is proposed that the quiet-time ring current consists of two parts, the inner ring current imbedded deeply inside the plasmapause and the outer ring current flowing in the plasma sheet. The source of the inner ring current appears to be trapped protons with energies 100 keV to several hundred keV having their peak intensity at 3 to 4 R sub e. The dominant source of the outer ring current is the population of protons with energy near 50 keV in the plasma sheet, as in Frank's (1967) model for the extraterrestrial ring current. The outer ring current is an innermost part of the tail current, and the inner ring current is its earthward extension. The plasma pressure is nearly continuous from the plasma sheet to the inner current ring region. When the plasma sheet moves inward during a substorm, the plasma pressure increase is directly conveyed to inside the plasmasphere and intensifies the inner ring current.

Sugiura, M.↗

Dynamics of the DAZd Disks

New observations of DAZ dwarfs suggest that many of these stars---the DAZd subclass---host rings of debris. We will discuss the minerology and dynamics ofthese rings as inferred from models of new mid-infrared spectra and photometry raken with the Spitzer space telescope, I will show that rhe DAZd rings do not need to be recently supplied by a single comet; they can survive for approx. 1 Gyr.

Kuchner, Marc↗

Compression strength of composite primary structural components

The linear elastic response is determined for an internally pressurized, long circular cylindrical shell stiffened on the inside by a regular arrangement of identical stringers and identical rings. Periodicity of this configuration permits the analysis of a portion of the shell wall centered over a generic stringer-ring joint; i.e., a unit cell model. The stiffeners are modeled as discrete beams, and the stringer is assumed to have a symmetrical cross section and the ring an asymmetrical section. Asymmetery causes out-of-plane bending and torsion of the ring. Displacements are assumed as truncated double Fourier series plus simple terms in the axial coordinate to account for the closed and pressure vessel effect (a non-periodic effect). The interacting line loads between the stiffeners and the inside shell wall are Lagrange multipliers in the formulation, and they are also assumed as truncated Fourier series. Displacement continuity constraints between the stiffeners and shell along the contact lines are satisfied point-wise. Equilibrium is imposed by the principle of virtual work. A composite material crown panel from the fuselage of a large transport aircraft is the numerical example. The distributions of the interacting line loads, and the out-of-plane bending moment and torque in the ring, are strongly dependent on modeling the deformations due to transverse shear and cross-sectional warping of the ring in torsion. This paper contains the results from the semiannual report on research on 'Pressure Pillowing of an Orthogonally Stiffened Cylindrical Shell'. The results of the new work are illustrated in the included appendix.

Johnson, Eric R.↗