Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “rating”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 271 records · Page 15

Growth rate of crystalline ice and the diffusivity of supercooled water from 126 to 262 K

Understanding deeply supercooled water is key to unraveling many of water’s anomalous properties. However, this has proven difficult due to rapid and uncontrolled crystallization. Using a pulsed laser heating technique, we measure the growth rate of crystalline ice, G(T), for 180 K < T < 262 K, i.e. deep within water’s “no man’s land.” The self-diffusion of supercooled liquid water, D(T), is obtained from G(T) using the Wilson-Frenkel model of crystal growth. For T > 237 K, G(T) and D(T) have super-Arrhenius (“fragile”) temperature dependences, but both crossover to Arrhenius (“strong”) behavior with a large activation energy in “no man’s land.” The fact that G(T) and D(T) are smoothly varying rules out the hypothesis that liquid water’s properties have a singularity at or near 228 K. However the results are consistent with a previous prediction for D(T) that assumed no thermodynamic transitions occur in “no man’s land.

Xu, Yuntao↗

ENVIRONMENTAL DEPENDENCE OF THE STAR FORMATION RATE AND THE SPECIFIC STAR FORMATION RATE AT FIXED MORPHOLOGY

From the Main galaxy sample of the Sloan Digital Sky Survey Data Release 7, I construct two volume-limited samples with luminosities -20.5 {<=} M{sub r} {<=} -18.5 and -22.5{<=}M{sub r} {<=}-20.5, respectively, to explore the environmental dependence of the star formation rate (SFR) and the specific star formation rate (SSFR) at fixed morphology. It is found that in these two volume-limited samples, galaxies in the lowest density regime preferentially have higher SFR and SSFR than galaxies in the densest regime. I divide each volume-limited Main galaxy sample into two distinct populations, the early type and the late type, and observe that the environmental dependence of the SFR and SSFR of galaxies remains true at fixed morphology: the SFR and SSFR of galaxies in the densest regime is still preferentially lower than that of the ones in the lowest density regime with the same morphological type. I also note that the environmental dependence of the SFR and SSFR of late-type galaxies is stronger than that of early-type galaxies.

79 ASTRONOMY AND ASTROPHYSICS↗

ENVIRONMENTAL DEPENDENCE OF THE STAR FORMATION RATE, SPECIFIC STAR FORMATION RATE, AND THE PRESENCE OF ACTIVE GALACTIC NUCLEI FOR HIGH STELLAR MASS AND LOW STELLAR MASS GALAXIES

Using two volume-limited main galaxy samples of the Sloan Digital Sky Survey Data Release 8 (SDSS DR8), we explore the environmental dependence of the star formation rate (SFR), specific star formation rate (SSFR), and the presence of active galactic nuclei (AGNs) for high stellar mass (HSM) and low stellar mass (LSM) galaxies. It is found that the environmental dependence of the SFR and SSFR for luminous HSM galaxies and faint LSM ones remains very strong: galaxies in the lowest density regime preferentially have higher SFR and SSFR than galaxies in the densest regime, while the environmental dependence of the SFR and SSFR for luminous LSM galaxies is substantially reduced. Our result also shows that the fraction of AGNs in HSM galaxies decreases as a function of density, while the one in LSM galaxies depends very little on local density. In the faint LSM galaxy sample, the SFR and SSFR of galaxies strongly decrease with increasing density, but the fraction of AGNs depends very little on local density. Such a result can rule out that AGNs are fueled by the cold gas in the disk component of galaxies that is also driving the star formation of those galaxies.

79 ASTRONOMY AND ASTROPHYSICS↗

Effects of stellar rotation on star formation rates and comparison to core-collapse supernova rates

We investigate star formation rate (SFR) calibrations in light of recent developments in the modeling of stellar rotation. Using new published non-rotating and rotating stellar tracks, we study the integrated properties of synthetic stellar populations and find that the UV to SFR calibration for the rotating stellar population is 30% smaller than for the non-rotating stellar population, and 40% smaller for the Hα to SFR calibration. These reductions translate to smaller SFR estimates made from observed UV and Hα luminosities. Using the UV and Hα fluxes of a sample of ∼300 local galaxies, we derive a total (i.e., sky-coverage corrected) SFR within 11 Mpc of 120-170 M {sub ☉} yr{sup –1} and 80-130 M {sub ☉} yr{sup –1} for the non-rotating and rotating estimators, respectively. Independently, the number of core-collapse supernovae discovered in the same volume requires a total SFR of 270{sub −80}{sup +110} M{sub ⊙} yr{sup −1}, suggesting a tension with the SFR estimates made with rotating calibrations. More generally, when compared with the directly estimated SFR, the local supernova discoveries strongly constrain any physical effects that might increase the energy output of massive stars, including, but not limited to, stellar rotation. The cosmic SFR and cosmic supernova rate data, on the other hand, show the opposite trend, with the cosmic SFR higher than that inferred from cosmic supernovae, constraining a significant decrease in the energy output of massive stars. Together, these lines of evidence suggest that the true SFR calibration factors cannot be too far from their canonical values.

79 ASTRONOMY AND ASTROPHYSICS↗

First frontier field constraints on the cosmic star formation rate density AT z ~ 10—the impact of lensing shear on completeness of high-redshift galaxy samples

In this work, we search the complete Hubble Frontier Field data set of Abell 2744 and its parallel field for $z\sim 10$ sources to further refine the evolution of the cosmic star formation rate density (SFRD) between $z\sim 8$ and $z\sim 10$. We independently confirm two images of the recently discovered triply imaged $z\sim 9.8$ source by Zitrin et al. and set an upper limit for similar $z\sim 10$ galaxies with red colors of ${J}_{125}-{H}_{160}\gt 1.2$ in the parallel field of Abell 2744. We utilize extensive simulations to derive the effective selection volume of Lyman-break galaxies at $z\sim 10$, both in the lensed cluster field and in the adjacent parallel field. Particular care is taken to include position-dependent lensing shear to accurately account for the expected sizes and morphologies of highly magnified sources. We show that both source blending and shear reduce the completeness at a given observed magnitude in the cluster, particularly near the critical curves. These effects have a significant, but largely overlooked, impact on the detectability of high-redshift sources behind clusters, and substantially reduce the expected number of highly magnified sources. The detections and limits from both pointings result in an SFRD which is consistent within the uncertainties with previous estimates at $z\sim 10$ from blank fields. The combination of these new results with all other estimates is also consistent with a rapidly declining SFRD in the 170 Myr from $z\sim 8$ to $z\sim 10$ as predicted by cosmological simulations and dark-matter halo evolution in ΛCDM. Once biases introduced by magnification-dependent completeness are accounted for, the full six cluster and parallel Frontier Field program will be an extremely powerful new data set to probe the evolution of the galaxy population at $z\gt 8$ before the advent of the James Webb Space Telescope.

79 ASTRONOMY AND ASTROPHYSICS↗

MICROCALORIMETER SPECTROSCOPY AT HIGH PULSE RATES: A MULTI-PULSE FITTING TECHNIQUE

Transition Edge Sensor microcalorimeters can measure X-ray and gamma-ray energies with very high energy resolution and high photon-collection efficiency. For this technology to reach its full potential in future X-ray observatories, each sensor must be able to measure hundreds or even thousands of photon energies per second. Current “optimal filtering” approaches to achieve the best possible energy resolution work only for photons that are well isolated in time, a requirement which is in direct conflict with the need for high-rate measurements. We describe a new analysis procedure to allow fitting for the pulse height of all photons even in the presence of heavy pulse pile-up. In the limit of isolated pulses, the technique reduces to standard optimal filtering with long records. We employ reasonable approximations to the noise covariance function in order to render this procedure computationally viable even for very long data records. The technique is employed to analyze X-ray emission spectra at 600 eV and 6 keV at rates up to 250 counts s{sup −1} in microcalorimeters having exponential signal decay times of approximately 1.2 ms.

79 ASTRONOMY AND ASTROPHYSICS↗

Dose-rate controlled energy dispersive x-ray spectroscopic mapping of the metallic components in a biohybrid nanosystem

In this work, we showcase that through precise control of the electron dose rate, state-of-the-art large solid angle energy dispersive X-ray spectroscopy (EDS) mapping in aberration-corrected scanning transmission electron microscope (STEM) is capable of faithful and unambiguous chemical characterization of the Pt and Pd distribution in a peptide-mediated nanosystem. This low-dose-rate recording scheme adds another dimension of flexibility to the design of elemental mapping experiments, and holds significant potential for extending its application to a wide variety of beam sensitive hybrid nanostructures.

composition mapping↗

Excitation energies, radiative and autoionization rates, dielectronic satellite lines, and dielectronic recombination rates for excited states of Rb-like W from Kr-like W [Relativistic atomic data for Rb-like tungsten]

Energy levels, radiative transition probabilities, and autoionization rates for [Ni]$4{s}^{2}4{p}^{6}{nl}$, [Ni]$4{s}^{2}4{p}^{5}4l^{\prime} {nl}$ ($l^{\prime} =d,f,n$ = 4–7), [Ni]$4s4{p}^{6}4l^{\prime} {nl}$, ($l^{\prime} =d,f,n$ = 4–7), [Ni]$4{s}^{2}4{p}^{5}5l^{\prime} {nl}$ (n = 5–7), and [Ni]$4s4{p}^{6}6l^{\prime} {nl}$ (n = 6–7) states in Rb-like tungsten (W37+) are calculated using the relativistic many-body perturbation theory method (RMBPT code) and the Hartree–Fock-relativistic method (COWAN code). Autoionizing levels above the [Ni]$4{s}^{2}4{p}^{6}$ threshold are considered. It is found that configuration mixing among [Ni]$4{s}^{2}4{p}^{5}4l^{\prime} {nl}$ and [Ni]$4s4{p}^{6}4l^{\prime} {nl}$ plays an important role for all atomic characteristics. Branching ratios relative to the first threshold and intensity factors are calculated for satellite lines, and dielectronic recombination (DR) rate coefficients are determined for the [Ni]$4{s}^{2}4{p}^{6}{nl}$ (n = 4–7) singly excited states, as well as the [Ni]$4{s}^{2}4{p}^{5}4{dnl}$, [Ni]$4{s}^{2}4{p}^{5}4{fnl}$, [Ni]$4s4{p}^{6}4{dnl}$, [Ni]$4{s}^{2}4{p}^{6}4{fnl}$, (n = 4–6), and [Ni]$4{s}^{2}4{p}^{5}5l^{\prime} 5l$ doubly excited nonautoionizing states in Rb-like W37+ ion. Contributions from the [Ni]$4s24{p}^{6}4{fnl}$ (n = 6–7), [Ni]$4{s}^{2}4{p}^{5}5l^{\prime} {nl}$ (n = 5–6), and [Ni]$4{s}^{2}4{p}^{5}6l^{\prime} {nl}$ (n = 6–7) doubly excited autoionizing states are evaluated numerically. The high-n state (with n up to 500) contributions are very important for high temperatures. These contributions are determined by using a scaling procedure. Synthetic dielectronic satellite spectra from Rb-like W are simulated in a broad spectral range from 8 to 70 Å. Here, these calculations provide highly accurate values for a number of W 37+ properties useful for a variety of applications including for fusion applications.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Hacking the thylakoid proton motive force for improved photosynthesis: modulating ion flux rates that control proton motive force partitioning into Δ ψ and ΔpH

There is considerable interest in improving plant productivity by altering the dynamic responses of photosynthesis in tune with natural conditions. This is exemplified by the 'energy-dependent' form of non-photochemical quenching (q E ), the formation and decay of which can be considerably slower than natural light fluctuations, limiting photochemical yield. In addition, we recently reported that rapidly fluctuating light can produce field recombination-induced photodamage (FRIP), where large spikes in electric field across the thylakoid membrane (Δψ) induce photosystem II recombination reactions that produce damaging singlet oxygen ( 1 O 2 ). Both q E and FRIP are directly linked to the thylakoid proton motive force (pmf), and in particular, the slow kinetics of partitioning pmf into its ΔpH and Δψ components. In this work, using a series of computational simulations, we explored the possibility of 'hacking' pmf partitioning as a target for improving photosynthesis. Under a range of illumination conditions, increasing the rate of counter-ion fluxes across the thylakoid membrane should lead to more rapid dissipation of Δψ and formation of ΔpH. This would result in increased rates for the formation and decay of qE while resulting in a more rapid decline in the amplitudes of Δψ-spikes and decreasing 1 O 2 production. These results suggest that ion fluxes may be a viable target for plant breeding or engineering. However, these changes also induce transient, but substantial mismatches in the ATP : NADPH output ratio as well as in the osmotic balance between the lumen and stroma, either of which may explain why evolution has not already accelerated thylakoid ion fluxes. Overall, though the model is simplified, it recapitulates many of the responses seen in vivo, while spotlighting critical aspects of the complex interactions between pmf components and photosynthetic processes. By making the programme available, we hope to enable the community of photosynthesis researchers to further explore and test specific hypotheses. This article is part of the themed issue 'Enhancing photosynthesis in crop plants: targets for improvement'.

59 BASIC BIOLOGICAL SCIENCES↗

Estimates of Ta strength at ultrahigh pressures and strain rates using thin-film graded-density impactors

In this paper, we present results from an experimental technique used to estimate the strength of Ta at extreme pressures (150 GPa) and strain rates (10 7 s -1 ). A graded-density impactor (GDI) was fabricated using sputter deposition to produce an approximately 40-μm-thick film containing alternating layers of Al and Cu. The thicknesses of the respective layers are adjusted to give an effective density gradient through the film. The GDIs were launched with a 2-stage light gas gun, and shock-ramp-release velocity profiles were measured over timescales of ~10 ns. Results are presented for the direct impact of the film onto LiF windows, which allows for a dynamic characterization of the GDI, as well as from impact onto thin (~40μm) sputtered Ta samples backed by a LiF window. The measurements were coupled with mesoscale numerical simulations to infer the strength of Ta, and the results agree well with other high-pressure platforms, particularly when strain-rate, microstructural, and thermodynamic-path differences are considered.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Inelastic {sup 17}F(p,p){sup 17}F scattering at E{sub c.m.}=3 MeV and the {sup 14}O(alpha,p){sup 17}F reaction rate

The {sup 14}O(alpha,p){sup 17}F reaction is an important trigger reaction leading to the alphap process in x-ray bursts. The inclusion of reaction channels populating excited {sup 17}F levels may significantly increase the calculated {sup 14}O(alpha,p){sup 17}F reaction rate. A radioactive {sup 17}F beam was used at the Oak Ridge National Laboratory Holifield Radioactive Ion Beam Facility to search for a {sup 18}Ne resonance at E{sub c.m.}({sup 17}F+p)approx =3.1 MeV that had been previously suggested to decay strongly to the first excited level in {sup 17}F. No evidence, however, of inelastic {sup 17}F+p scattering was observed at this energy, and an upper limit of approx10 mb has been set on the inelastic-scattering cross section.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Astrophysical reaction rates for {sup 58,60}Ni(n,{gamma}) from new neutron capture cross section measurements

New neutron capture cross sections of {sup 58,60}Ni were measured in the energy range from 100 eV to 600 keV using the Oak Ridge Electron Linear Accelerator. The combination of these new neutron capture data with previous transmission data allowed a resonance analysis up to 900 keV using R-matrix theory. The theoretically determined direct capture cross sections were included in the analyses. From these resonance parameters and the direct capture contribution, new (n,{gamma}) astrophysical reaction rates were determined over the entire energy range needed by the latest stellar models describing the so-called weak s process.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Experimental Investigation of the 19 Ne(p,γ) 20 Na Reaction Rate and Implications for Breakout from the Hot CNO Cycle

The 19 Ne(p,γ) 20 Na reaction is the second step of a reaction chain which breaks out from the hot CNO cycle, following the 15 O(α,γ) 19 Ne reaction at the onset of x-ray burst events. We investigate the spectrum of the lowest proton-unbound states in 20 Na in an effort to resolve contradictions in spin-parity assignments and extract reliable information about the thermal reaction rate. Here, the proton-transfer reaction 19 Ne(d,n) 20 Na is measured with a beam of the radioactive isotope 19 Ne at an energy around the Coulomb barrier and in inverse kinematics. We observe three proton resonances with the 19 Ne ground state, at 0.44, 0.66, and 0.82 MeV c.m. energies, which are assigned 3 + , 1 + , and (0 + ), respectively. In addition, we identify two resonances with the first excited state in 19 Ne, one at 0.20 MeV and one, tentatively, at 0.54 MeV. These observations allow us for the first time to experimentally quantify the astrophysical reaction rate on an excited nuclear state. Our experiment shows an efficient path for thermal proton capture in 19 Ne(p,γ) 20 Na, which proceeds through ground state and excited-state capture in almost equal parts and eliminates the possibility for this reaction to create a bottleneck in the breakout from the hot CNO cycle.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

A Scalable Method for Extracting Soiling Rates from PV Production Data

We present a method for analyzing time series production data from photovoltaic systems to extract the rate at which energy yield is affected by the accumulation of dust, dirt, and other forms of soiling. We describe an approach that is based on prevailing methods which consider the change in energy production during dry periods. The method described here builds upon these methods by considering a statistical sample of soiling intervals from each site under consideration. The method enables straightforward application to a large number of sites with minimal parameterization of data-filtering requirements. Furthermore, it enables statistical confidence intervals and comparisons between sites.

14 SOLAR ENERGY↗

Evaluation and Field Assessment of Bifacial Photovoltaic Module Power Rating Methodologies

1-sun power ratings for bifacial modules are currently undefined. This is partly because there is no standard definition of rear irradiance given 1000 Wm-2 on the front. Using field measurements and simulations, we evaluate multiple deployment scenarios for bifacial modules and provide details on the amount of irradiance that could be expected. A simplified case that represents a single module deployed under conditions consistent with existing 1-sun irradiance standards leads to a bifacial reference condition of 1000 Wm-2 Gfront and 130-140 Wm-2 Grear. For fielded systems of bifacial modules, Grear magnitude and spatial uniformity will be affected by self-shade from adjacent modules, varied ground cover, and ground-clearance height. A standard measurement procedure for bifacial modules is also currently undefined. A proposed international standard is under development, which provides the motivation for this work. Here, we compare outdoor field measurements of bifacial modules with irradiance on both sides with proposed indoor test methods where irradiance is only applied to one side at a time. The indoor method has multiple advantages, including controlled and repeatable irradiance and thermal environment, along with allowing the use of conventional single-sided flash test equipment. The comparison results are promising, showing that the indoor and outdoor methods agree within 1%-2% for multiple rear-irradiance conditions and bifacial module types.

14 SOLAR ENERGY↗