Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “propylene”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 271 records · Page 15
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

Exploring the Use of Flexible Circuit Boards to the Increase Power Density of a Rotary Triboelectric Nanogenerator

EExpansion on previous triboelectric nanogenerator (TENG) research that investigated a freestanding rotary TENG. The previous prototype used a single printed circuit board (PCB) stator with exposed copper electrodes and an arcylic rotor with vinyl-cut fluorinated ethylene propylene (FEP) wedges. The second generation prototype again used a PCB stator but used a flexible PCB rotor consisting of alternating polyamide and copper wedges. This prototype was assembled in a stacked configuration, with the intent of increasing current output. Results indicated that the internal resistance of the prototype was decreased, allowing for higher current output. However, degradation of the power output was observed, which led to decay testing of the prototypes. To overcome charge decay, a self-exciting design is suggested as further work.

42 ENGINEERING↗
DOE OSTI2020

Comparison of Single-Ion Conducting Polymer Gel Electrolytes for Sodium, Potassium, and Calcium Batteries: Influence of Polymer Chemistry, Cation Identity, Charge Density, and Solvent on Conductivity

From the standpoint of material diversification and sustainability, the development of so-called “beyond lithium-ion” battery chemistries is important for the future of energy storage. Na, K, and Ca are promising as the basis for battery chemistries in that these elements are highly abundant. Here, a series of single-ion conducting polymer electrolytes (SIPEs) for Na, K, and Ca batteries are synthesized and investigated. The two classes of metal cation neutralized SIPEs compared are crosslinked poly(ethylene glycol) dimethacrylate-x-styrene sulfonate (PEGDMA-SS) and poly(tetrahydrofuran) diacrylate-x-4-styrenesulfonyl (trifluoromethylsulfonyl)imide (PTHFDA-STFSI); three cation types, three charge densities, and four swelling states are examined. The impact on conductivity of all of these parameters is studied, and in conjunction with small angle X-ray scattering (SAXS), it is found that promoting ion dissociation and preventing the formation of dense ionic aggregates facilitates ion transport. These results indicate many of the lessons learned from the Li SIPE literature can be translated to beyond Li chemistries. At 25 °C, the best performing Na/K and Ca exchanged polymers yield active cation conductivity on the order of 10 –4 S/cm and 10 –6 S/cm, respectively, for ethylene carbonate:propylene carbonate gelled SIPEs, and 10 –5 S/cm and 10 –7 S/cm, respectively, for glyme gelled SIPEs.

X-ray scattering↗
DOE OSTI2026

Transient Catalytic Reaction Analysis Through Signal Defragmentation

The Temporal Analysis of Products (TAP) pulse response technique provides valuable insights into catalytic function and reaction kinetics. However, complex fragmentation patterns in the TAP mass spectrometry signals can complicate precise quantification, particularly when analyzing transient gas flux data typical of TAP experiments. This work demonstrates a standard defragmentation method that deconvolves transient TAP signals while maintaining the temporal resolution of the experiment. First, the integrals of calibration gas fluxes are used to determine the fingerprint fragmentation pattern and construct a fragmentation matrix. This matrix is then used to defragment experimental flux data at each recorded time point via a non-negative least squares regression. The effectiveness of this method is demonstrated using virtual data and control experiments with a TAP reactor system. The defragmentation is then applied to the more complex propane dehydrogenation reaction on a chromia/alumina catalyst, which can contain up to ten significant gas species in the reactor outlet. Initial propane pulsing reveals an induction period during which propane is fully oxidized to CO2, followed by partial reduction to CO. Afterwards, there is a transition in chemistries towards coking and propylene production. Our example illustrates a practical method for the accurate determination of the time-dependent reactant/product concentrations and rates for a thorough analysis of the propane dehydrogenation kinetics. This approach can be broadly applied to any transient mass spectrometry experiment for a better understanding of catalyst-reaction dynamics.

36 - MATERIALS SCIENCE↗
DOE OSTI2021

Effect of Solvent on Fluorescence Emission from Polyethylene Glycol-Coated Graphene Quantum Dots under Blue Light Illumination

To explore aggregate-induced emission (AIE) properties, this study adopts a one-pot hydrothermal route for synthesizing polyethylene glycol (PEG)-coated graphene quantum dot (GQD) clusters, enabling the emission of highly intense photoluminescence under blue light illumination. The hydrothermal synthesis was performed at 300 °C using o-phenylenediamine as the nitrogen and carbon sources in the presence of PEG. Three different solvents, propylene glycol methyl ether acetate (PGMEA), ethanol, and water, were used for dispersing the PEG-coated GQDs, where extremely high fluorescent emission was achieved at 530–550 nm. It was shown that the quantum yield (QY) of PEG-coated GQD suspensions is strongly dependent on the solvent type. The pristine GQD suspension tends to be quenched (i.e., QY: ~1%) when dispersed in PGMEA (aggregation-caused quenching). However, coating GQD nanoparticles with polyethylene glycol results in substantial enhancement of the quantum yield. When investigating the photoluminescence emission from PEG-coated GQD clusters, the surface tension of the solvents was within the range of from 26.9 to 46.0 mN/m. This critical index can be tuned for assessing the transition point needed to activate the AIE mechanism which ultimately boosts the fluorescence intensity. The one-pot hydrothermal route established in this study can be adopted to engineer PEG-coated GQD clusters with solid-state PL emission capabilities, which are needed for next-generation optical, bio-sensing, and energy storage/conversion devices.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Experimental Comparison of Elastomeric Materials for Hydraulic Seal Durability under Reciprocating Conditions

Wave Energy Converters (WECs) rely on hydraulic Power Take-Off (PTO) systems to transform the kinetic energy of ocean waves into electricity, where hydraulic seals play a critical role in preventing fluid leakage and ensuring watertight operation under harsh marine conditions. However, seal degradation due to wear, fatigue, and corrosion remains a key challenge limiting system reliability and increasing maintenance costs. In this study, the tribological performance of elastomeric materials for hydraulic sealing applications that are based on commercial polyurethane and custom-compounded Ethylene Propylene Diene Monomer (EPDM) is investigated. Using a CSM tribometer, reciprocating wear tests were conducted in accordance with ASTM G133 under dry sliding conditions, with normal loads ranging from 3 to 10 N, and sliding speeds of 10 to 30 mm/s. Coefficient of friction (COF), specific wear rate, and worn surface morphology are evaluated to understand how load, velocity, and material composition affect seal durability. Improved wear stability and high Shore A hardness (93–94) were demonstrated by the commercial thermoplastic polyurethane (Duralast 4203 and 4758). EPDM-based compounds showed different filler-dependent behaviors, formulations filled with carbon black (E3) had the lowest wear rate (1.45 × 10?4 mm³ N?¹ m?¹) and increased load-bearing capacity, while samples modified with silica and plasticizer (E4, E5) had better conformability and damping but less hardness. Compounded EPDMs showed wider deformation zones because of their lower modulus and filler-matrix interfacial fluctuations, while commercial grades exhibited shallower wear scars (= 380 µm), according to optical profilometry. The Archard model-based lifetime estimation showed that, under 10 N and 30 mm/s, operational endurance ranged from 3.1 to 6.2 years. Because of its low wear rate and steady interfacial behavior, E3 had the longest anticipated life. For medium-load hydraulic sealing applications, these results demonstrate the possibility of customized EPDM formulations as affordable substitutes for commercial polyurethanes. They also offer a quantitative foundation for material selection and lifespan prediction.

Durability↗
DOE OSTI2022

Recycling of Pretreated Polyolefin-Based Ocean-Bound Plastic Waste by Incorporating Clay and Rubber

Plastic waste found in oceans has become a major concern because of its impact on marine organisms and human health. There is significant global interest in recycling these materials, but their reclamation, sorting, cleaning, and reprocessing, along with the degradation that occurs in the natural environment, all make it difficult to achieve high quality recycled resins from ocean plastic waste. To mitigate these limitations, various additives including clay and rubber were explored. In this study, we compounded different types of ocean-bound (o-HDPE and o-PP) and virgin polymers (v-LDPE and v-PS) with various additives including a functionalized clay, styrene-multi-block-copolymer (SMB), and ethylene-propylene-based rubber (EPR). Physical observation showed that all blends containing PS were brittle due to the weak interfaces between the polyolefin regions and the PS domains within the polymer blend matrix. Blends containing clay showed rough surfaces and brittleness because of the non-uniform distribution of clay particles in the polymer matrix. To evaluate the properties and compatibility of the blends, characterizations using differential scanning calorimetry (DSC), scanning electron microscopy (SEM), and small-amplitude oscillatory shear (SAOS) rheology were carried out. The polymer blend (v-LDPE, o-HDPE, o-PP) containing EPR showed improved elasticity. Incorporating additives such as rubber could improve the mechanical properties of polymer blends for recycling purposes.

42 ENGINEERING↗
DOE OSTI2020

Compatibility of Elastomers with Polyoxymethylene Dimethyl Ethers and Blends with Diesel

Polyoxymethylene dimethyl ethers (PODEs) have shown promise as candidates for diesel fuel blendstocks due to their low sooting tendency, high cetane number, and diesel-comparable boiling point range. However, there is a lack of literature regarding compatibility of PODEs with common automotive elastomers, which would be a prerequisite to their adoption into the marketplace. To address this need, an exposure study and complementary solubility analysis were undertaken. A commercially available blend of PODEs with polymerization degree ranging from 3 to 6 was blended with diesel certification fuel at 0, 33, 50, 67, at 100% by mass. Elastomer coupons were exposed to the various blends for a period of 4 weeks and evaluated for volume swell. The elastomer materials included multiple fluoroelastomers (Viton and fluorosilicone) and acrylonitrile butadiene rubbers (NBR), as well as neoprene, polyurethane, epichlorohydrin (ECO), PVC-nitrile blend (OZO), ethylene propylene diene monomer (EPDM), styrene-butadiene rubber (SBR), and silicone. The exposure results indicated overall poor compatibility for PODE, with every elastomer except for fluorosilicone exhibiting greater than 30% volume swell at the 33% blend level. The general trend across the elastomers was either a consistent increase in volume swell with PODE concentration, or maximum in volume swell at an intermediate blend fraction. One notable exception is EPDM, which is not generally compatible with diesel fuel and which exhibited a reduction in volume swell with increasing PODE concentration. The same elastomers and PODE/diesel blends were evaluated using Hansen solubility parameter analysis, which predicted similar trends to the exposure study with the exception of ECO. From these results, we conclude that adoption of PODEs as a diesel fuel blendstock will require either the development of specialized elastomers, or that the blend fraction be kept to a low level to maintain compatibility with existing elastomers.

42 ENGINEERING↗
DOE OSTI2020

Examination of Solvent- Room Temperature Ionic Liquid Interactions using 2D NMR and Computational Chemistry

Rare earth metals (REMs) are the key functioning material found in microelectronics, advanced batteries, and high-efficiency electrical motors. Current methods for producing REMs require high temperatures (i.e. energy intensive) and produce an abundance of hazardous fluoride waste. Room temperature ionic liquids (RTILs) are an ideal alternative electrolyte because they allow for a low-temperature, energy-efficient electrochemical process. RTIL properties such as viscosity and conductivity determine how effective they can be in this process. Since viscosity is directly related to both intra and intermolecular forces, this study sets out to investigate two RTILs-Trihexyltetradecylphosphonium dicyanamide (Cyphos 105) and Trihexyltetradecylphosphonium bistrifimide (Cyphos 109) and their interactions. Results from 2-dimensional nuclear magnetic resonance (2D NMR) spectroscopy show that there is an interaction between the tetradecyl tail and the phosphorus atom of the Cyphos RTIL. In order to establish whether this is an intra or an inter-molecular interaction, DFT-based computational calculations were performed to determine the optimized geometry. Calculations were done both in the gas phase and with propylene carbonate as an augmenting solvent. Preliminary results show that there is minimal intramolecular interaction between the tetradecyl tail and the phosphorus atom of the RTILs, and that the interaction seen in the 2D NMR experiment is likely of an intermolecular nature instead.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Swell Behavior of Elastomers with a Hydrothermal Liquefaction Bio-Crude and a Fast Pyrolysis Bio-Oil

The compatibility of seventeen elastomer materials with two heavy biofuels (fast pyrolysis bio-oil and hydrothermal liquefaction (HTL) bio-crude) and diesel was assessed through volume change measurements. The elastomers included two fluorocarbons, six acrylonitrile rubbers (NBRs), and one each of fluorosilicone, neoprene, polyurethane, silicone, epichlorohydrin rubber (ECO), a blend of polyvinyl chloride and NBR (OZO), styrene butadiene rubber (SBR), hydrogenated NBR (HNBR) and ethylene propylene diene monomer (EPDM). The specimens were immersed in each test fuel for four weeks at 50°C and then measured for volume change. Afterwards, the specimens were dried, and the volume was remeasured. Ingeneral, the bio-oil produced unacceptable swelling in the fluoroelastomers, ECO, OZO, neoprene, polyurethane, SBR, HNBR, EPDM, silicone and five of the NBRs. In most cases, the HTL bio-crude produced lower (though still unacceptable) swelling than the bio-oil. Materials that showed good compatibility with the HTL biocrude were the fluoroelastomers, OZO, and silicone.

Kass, Michael↗
DOE OSTI2021

Monitoring Degradation of Nuclear Cable Insulation Subjected To Sequential and Simultaneous Thermal and Radiation Aging

Predicting useful remaining life of cables in nuclear power plants is a topic of growing interest as plant continue to age. A typical electrical cable consists of polymeric materials, such as the cable jacket and insulation, which are susceptible to degradation due to exposure to both elevated temperatures and gamma irradiation over decades of service. In this work two insulation materials, crosslinked polyethylene (XLPE) and ethylene propylene diene (EPDM) elastomer, were characterized to quantify aging using total color difference and indenter modulus. Since the effects of thermal and gamma radiation are not additive but coupled, the effects of different aging scenarios including sequential and simultaneous aging were also evaluated. In the case of sequential aging, two aging scenarios were explored where the order in which thermal and gamma radiation received were altered. Total color difference of XLPE showed that sequentially aged insulation specimens, which received radiation first, degraded slightly more at maximum exposure than specimens which received thermal first. Similarly, in the case of EPDM, the extent of degradation evaluated using total color difference was found to be most severe in the case of sequentially aged insulation specimens which received radiation first. Indenter modulus was found to be insensitive to aging for XLPE but trended for EPDM. The largest variations were observed for the sequentially aged insulation specimens which received radiation first, similar to what was observed for total color difference.

Pallaka, Madhusudhan Reddy↗
DOE OSTI2022

Nanocomposite membranes and methods of forming the same

A nanocomposite including a mesoporous, macroporous, or a combination thereof oxide and a zeolitic imidazolate framework (ZIF) that is filling the pores of the oxide to form a ZIF phase embedded and at least substantially confined mostly within the oxide. Methods of making nanocomposites including the steps of depositing an oxide in the pores of a mesoporous oxide; and further treating the resulting material with vapor, liquid, or supercritical CO2 comprising an azole-based compound, a carboxylate based compound, or a combination thereof. Use of disclosed articles to separate propylene and propane in a mixture thereof.

Tsapatsis, Michael↗
DOE OSTI2023

Direct catalytic conversion of alcohols to olefins of higher carbon number with reduced ethylene production

A catalyst composition for converting an alcohol to olefins, the catalyst composition comprising the following components: (a) a support (e.g., particles) comprising silicon and oxygen; (b) at least one of copper and silver residing on and/or incorporated into said support; and (c) at least one lanthanide element residing on and/or incorporated into said support. The catalyst may also further include component (d), which is zinc. Also described herein is a method for converting an alcohol to one or more olefinic compounds (an olefin fraction) by contacting the alcohol with a catalyst at a temperature of at least 100° C. and up to 500° C. to result in direct conversion of the alcohol to an olefin fraction containing one or more olefinic compounds containing at least three carbon atoms; wherein ethylene and propylene are produced in a minor proportion of the olefin fraction, and butenes and higher olefins are produced in major proportion.

Li, Zhenglong↗
DOE OSTI2023

Catalytic conversion of bio-mass derivable aliphatic alcohols to valuable alkenes or oxygenates

Disclosed is a catalyst system, its methods of preparation and its use for producing, among others, alkenes and/or saturated or unsaturated oxygenates and, which include at least one of an aldehyde and an acid (such as propyl aldehyde, acrolein, acrylic acid, isobutyl aldehyde, methacrolein, methacrylic acid), comprising subjecting the corresponding an alcohol or a diol selected from the group consisting of propanol, propanediol and isobutanol that is derivable from biomass, to a vapor phase process over the catalytic system described herein in the presence of a gas mixture of oxygen, air or nitrogen and/or other suitable diluting gas. In the case where one of 1-propanol, or 1,2-propanediol or 1,3-propanediol or a mixture thereof is subjected to a vapor phase catalytic process over the said catalytic system in the presence of air or oxygen, and a co-fed gas, such as nitrogen or other diluting gas, the product is at least one of propylene, propyl aldehyde, acrolein and acrylic acid. In the case where isobutanol is subjected to such a process, the product is at least one of isobutylene, isobutyl aldehyde, methacrolein and methacrylic acid. The catalyst system comprises a single catalytic zone or multi-catalytic zones, in each of which the composition of the co-feed and other reaction parameter can be independently controlled.

Lin, Manhua↗
DOE OSTI2020

Ga speciation in Ga/H-ZSM-5 by in-situ transmission FTIR spectroscopy

H-ZSM-5 supported Ga (Ga/H-ZSM-5) has long been recognized as a promising catalyst for nonoxidative dehydrogenation and dehydroaromatization of alkanes. However, Ga speciation under reaction conditions remains controversial. In this work, in-situ transmission Fourier Transform infrared (FTIR) spectroscopy is employed to systematically investigate Ga speciation in Ga/H-ZSM-5 with three Si/Al ratios (15, 28 and 39) and a wide range of Ga/Al ratios (0–1.7). Quantitative FTIR spectroscopy with pyridine reveals that one Ga atom roughly replaces one Brønsted acid site (BAS) at Ga/BAS ratio up to 0.7, however, only up to ~80% of the BAS on the H-ZSM-5 can be exchanged even with excess amounts of Ga. At a low Si/Al ratio of 15, the intensity of GaH x bands on reduced Ga/H-ZSM-5 at 550 °C increases almost linearly at low Ga loadings (Ga/Al < 0.13), and then levels off. In contrast, no detectable GaH x bands are observed on Ga/H-ZSM-5 with a high Si/Al ratio of 39, with Ga/Al ratios up to 1.3. The dependence of GaH x bands on both the Si/Al ratios and the Ga/Al ratios shows that Ga speciation varies with BAS density in the zeolite. We hypothesize that paired BAS sites are preferentially exchanged with Ga + , leading to the formation of Ga + –H + pair sites, while the exchange of isolated BAS form isolated Ga+ species. Using water as a probe molecule, we show that isolated Ga + and Ga + –H + pair sites have distinct properties, i.e., the former can be easily oxidized by water at 150 °C to form GaOOH species, while the latter is inactive under the same conditions. Furthermore, these results provide direct experimental evidence for the existence of two types of Ga species on reduced Ga/H-ZSM-5, highlighting the possibility that they have different catalytic activities in alkane dehydrogenation reactions.

03 NATURAL GAS↗
DOE OSTI2021

Understanding the Correlation between Ga Speciation and Propane Dehydrogenation Activity on Ga/H-ZSM-5 Catalysts

H-ZSM-5 zeolite-supported Ga (Ga/H-ZSM-5) has been considered as a selective catalyst for nonoxidative propane dehydrogenation (PDH) for decades; however, the reaction mechanism remains a topic of considerable discussion. In particular, the correlation between various Ga species present on the catalyst at the reaction conditions and the PDH activity has yet to be established. In this work, intrinsic PDH rates and activation energies were determined on Ga + –H + pair sites and isolated Ga + sites on Ga/H-ZSM-5 samples with a wide range of Si/Al and Ga/Al ratios. Here, the turnover frequency on Ga + –H + pair sites in the PDH is higher than that of isolated Ga + sites by a factor of ~15. Experimental measurements combined with a dual-site model show the activation energy in the PDH on the Ga + –H + pair sites and isolated Ga + sites to be 90.8 ± 1.5 and 117 ± 4.7 kJ·mol –1 , respectively. These results demonstrate that Ga+–H+ pair sites are much more active in the PDH than isolated Ga + sites. The activation energy of GaH x decomposition to form H 2 was determined to be 40–60 kJ·mol –1 higher than that of the PDH on Ga species, suggesting that the GaH x decomposition is unlikely to be part of the PDH mechanism. Although both Brønsted acid and Ga sites interact with propane, Fourier transform infrared spectroscopy results provide strong evidence suggesting that the alkyl mechanism is more likely in the PDH on Ga/H-ZSM-5 catalysts.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Tuning the Molecular Structure and Reaction Mechanism of Olefin Metathesis by Model Bilayered Supported MoO x /AlO x /SiO 2 Catalysts

The molecular structure and activity of supported MoO x olefin metathesis catalysts are heavily impacted by the choice of catalyst support. In this study, surface modification of the SiO 2 support with AlO x and selective anchoring of the MoO x on the surface AlO x sites were used to tune the structure, activation, and reactivity of the resulting surface MoO x sites. Extensive in situ molecular characterization, chemical probe studies, and density functional theory (DFT) calculations reveal that the enhanced activity of the supported MoO x /AlO x /SiO 2 catalyst over the MoO x / SiO 2 catalyst is associated with more favorable activation and kinetics of surface MoO x anchored at AlO x sites.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗