Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “polymerization”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 271 records · Page 15

Organocatalyzed Atom Transfer Radical Polymerization: Perspectives on Catalyst Design and Performance

The recent development of organocatalyzed atom transfer radical polymerization (O‐ATRP) represents a significant advancement in the field of controlled radical polymerizations. A number of classes of photoredox catalysts have been employed thus far in O‐ATRP. Analysis of the proposed mechanism gives insight into the relevant photophysical and chemical properties that determine catalyst performance. Discussion of each of the classes of O‐ATRP catalysts highlights their previous uses, their roles in the development of O‐ATRP, and the distinctive properties that govern their polymerization behavior, leading to a set of design principles for O‐ATRP catalysts. Remaining challenges for O‐ATRP are presented, as well as prospects for further improvement in the application scope of O‐ATRP. image

Theriot, Jordan C.↗

Experimental and Modeling Studies for the Removal of Crystal Violet Dye from Aqueous Solutions using Eco-friendly Gracilaria corticata Seaweed Activated Carbon/Zn/Alginate Polymeric Composite Beads

This research article describes, an eco-friendly activated carbon prepared from the Gracilaria corticata seaweeds which was employed for the preparation of biodegradable polymeric beads for the efficient removal of crystal violet dye in an aqueous solution. The presence of chemical functional groups in the adsorbent material was detected using FTIR spectroscopy. The morphology and physical phases of the adsorbent materials were analyzed using SEM and XRD studies respectively. Batch mode dye adsorption behavior of the activated carbon/Zn/alginate polymeric beads was investigated as a function of dosage, solution pH, contact time, initial dye concentration and temperature. Maximum dye removal was observed at a pH of 5.0, 1 g of adsorbent dosage with 60 mg/L dye concentration, 50 min of contact time and at 30 °C. The equilibrium modeling studies were analyzed with Freundlich and Langmuir adsorption isotherms and the adsorption dynamics was predicted with Lagergren’s pseudo-first order, pseudo-second order equations and intra particle diffusion models. The process of dye removal followed a pseudo second-order kinetics rather than pseudo first order. The thermodynamic parameters like standard Gibbs free energy change (ΔG°), enthalpy change (ΔH°) and entropy change (ΔS°) were determined and the results imply that the adsorption process was spontaneous, endothermic and increases the randomness between the adsorbent and adsorbate. The results from the experimental and correlation data reveal that the Gracilaria corticata activated carbon/Zn/alginate polymeric beads have proved to be an excellent adsorbent material for the removal of CV dye.

36 MATERIALS SCIENCE↗

Revealing the mechanism of lignin re-polymerization inhibitor in acidic pretreatment and its impact on enzymatic hydrolysis

Phenolic additives, including 2-naphthol, 2-naphthol-7-sulfonate, and resorcinol were evaluated for their impact on the lignin re-polymerization and subsequent hydrolysis of bamboo residues. Low surface lignin concentration (65.68%) of the substrate and high Tg value (185 °C) of lignin was observed for 2-naphthol-7-sulfonate assisted pretreatment, leading to the most significant increase (14%) in enzymatic hydrolysis efficiency of pretreated bamboo residues. Meanwhile, physicochemical properties of lignin revealed that the introduced sulfonic acid groups increased the surface charge, decreased the molecular weight, promoted the cleavage of β-O-4 linkages, and prevented the re-condensation of lignin. Even though resorcinol-assisted pretreatment, by contrast, was found to be an inhibitor for enzymatic hydrolysis. NMR analysis of modified lignin showed that resorcinol led to a higher amount of non-condensed phenolic OH groups and promoted the cleavage of β-O-4 linkages, acting as an inhibitor in lignin re-polymerization during the dilute acidic pretreatment. In short, the above findings present a detailed view of suppressing lignin re-polymerization for boosting the utilization of bioresources with acidic pretreatment.

09 BIOMASS FUELS↗

High strain-rate compression behavior of polymeric rod and plate Kelvin lattice structures

The compressive high strain-rate behavior of polymeric Kelvin lattice structures with rod-based or plate-based unit cells was investigated through experimental techniques and finite element simulations. Polymeric lattice structures with 5x5x5 unit cell geometries were manufactured on the millimeter scale using vat polymerization additive manufacturing and tested at low (0.001/s) and high (1000/s) strain-rates. High strain-rate experiments were performed and validated for a viscoelastic split-Hopkinson (Kolsky) pressure bar system (SHPB) coupled with high-speed imaging and digital image correlation (DIC). Experimental results at both low and high strain-rates show the formation of a localized deformation band which was more prevalent in low relative density specimens and low strain-rate experiments. Strain-rate effects of lattice specimens strongly correlate with effects of the base polymer material; both bulk polymer and lattice specimen demonstrated strain-rate hardening, strain-rate stiffening, and decreased fracture strain under dynamic loading. Results show mechanical failure properties and energy absorption depended strongly on the relative density of the lattice specimen and exhibited distinct scaling between relative density and geometry type (rod, plate) and loading rate. High relative density plate-lattices demonstrated inferior mechanical properties to rod-lattices; however, there exists a critical relative density for a given mechanical property (17%- 28%) below which plate-lattices outperform rod-lattices of similar mass. As a result, high strain-rate explicit finite element simulations were performed and showed good agreement with the mechanical failure trends and deformation modes observed in the experiments.

36 MATERIALS SCIENCE↗

Alkylation of monomeric, dimeric, and polymeric lignin models through carbon-hydrogen activation using Ru-catalyzed Murai reaction

In this study, we have assessed directed carbon-hydrogen activation (CHA) for alkylation of monomeric, dimeric, and polymeric lignin models using Murai's catalyst [RuH 2 (CO)(PPh 3 ) 3 ]. Based on related work from our laboratory showing that isolated organosolv lignin bears benzylic directing groups ideal for CHA reactions, this approach could offer new methodology for the valorization of biorefinery lignin. Monomeric and dimeric models bearing a keto group at the benzylic position undergo Ru-catalyzed alkylation in good to excellent yield. Similarly, models bearing a benzylic OH group also undergo alkylation via a tandem oxidation/alkylation process enabled by the Ru catalyst. Polymeric models show low levels of functionalization as a result of the poor solubility of the starting polymer. With unsymmetrical models, functionalization occurs first at the least sterically hindered ortho-site, but a subsequent alkylation, leading to disubstituted products can occur at the more sterically hindered site, leading to hexasubstituted arenes. The reaction shows sensitivity to free phenolic OH groups, which appears to reduce the yield in some reactions, and is also a contributing factor to the low yields observed with polymeric lignin models. Finally, combining CHA methodology with lignin isolation technology able to introduce appropriate directing groups for catalytic functionalization will form the basis for improved conversion of lignin to high value chemical products.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Dense Carbon Monoxide to 160 GPa: Stepwise Polymerization to Two-Dimensional Layered Solid

Carbon monoxide (CO) is the first molecular system found to transform into a nonmolecular “polymeric” solid above 5.5 GPa, yet been studied beyond 10 GPa. Here, we show a series of pressure-induced phase transformations in CO to 160 GPa: from a molecular solid to a highly colored, low-density polymeric phase I to translucent, high-density phase II to transparent, layered phase III. The properties of these phases are consistent with those expected from recently predicted 1D P2 1 /m, 3D I2 1 2 1 2 1 , and 2D Cmcm structures, respectively. Furthermore, the present results advocate a stepwise polymerization of CO triple bonds to ultimately a 2D singly bonded layer structure with an enhanced ionic character.

36 MATERIALS SCIENCE↗

Silica–Conjugated Polymer Hybrid Fluorescent Nanoparticles: Preparation by Surface-Initiated Polymerization and Spectroscopic Studies

Organic/inorganic hybrid nanoscale materials possess fascinating optical, electronic, magnetic, and catalytic properties that are promising for a variety of practical applications. Such properties can be dramatically affected by the hierarchical structure and molecular organization in the nanomaterials. Herein, we employed surface-initiated Kumada catalyst-transfer polymerization to prepare hybrid materials consisting of shells of conjugated polymers (CPs)—polythiophene or poly(p-phenylene)—and their block copolymers covalently attached to the surface of silica nanoparticles. Because of the controlled chain-growth mechanism of surface-initiated polymerization, we obtained structurally well-defined CP blocks in the diblock copolymer shells, which produced distinct spectroscopic properties related to the intraparticle excitation energy transfer between the nanoscale polymer shell components, as well as the formation of interfacial exciplex states. Finally, the spectroscopic phenomena were further understood via time-resolved transient absorption spectroscopy studies. Overall, the surface-initiated polymerization provided an efficient tool to prepare structurally defined and highly stable organic polymer shell–inorganic core nanoparticles with tunable spectroscopic characteristics not achievable from corresponding single-component systems.

36 MATERIALS SCIENCE↗

Shape-Persistent, Thermoresponsive Polypeptide Brushes Prepared by Vapor Deposition Surface-Initiated Ring-Opening Polymerization of α-Amino Acid N -Carboxyanhydrides

We report that surface-grafting thermoresponsive polymers allows the preparation of thin polymer brush coatings with surface properties that can be manipulated by variation of temperature. In most instances, thermoresponsive polymer brushes are produced using polymers that dehydrate and collapse above a certain temperature. This report presents the preparation and properties of polymer brushes that show thermoresponsive surface properties, yet are shape-persistent in that they do not undergo main chain collapse. The polymer brushes presented here are obtained via vapor deposition surface-initiated ring-opening polymerization (SI-ROP) of γ-di- or tri(ethylene glycol)-modified glutamic acid N-carboxyanhydrides. Vapor deposition SI-ROP of γ-di- or tri(ethylene glycol)-modified L- or D-glutamic acid N-carboxyanhydrides affords helical surface-tethered polymer chains that do not show any changes in secondary structure between 10 and 70 °C. QCM-D experiments, however, revealed significant dehydration of poly(γ-(2-(2-methoxyethoxy)ethyl)-l-glutamate) (poly(L-EG 2 -Glu)) brushes upon heating from 10 to 40 °C. At the same time, AFM and ellipsometry studies did not reveal significant variations in film thickness over this temperature range, which is consistent with the shape-persistent nature of these polypeptide brushes and indicates that the thermoresponsiveness of the films is primarily due to hydration and dehydration of the oligo(ethylene glycol) side chains. The results we present here illustrate the potential of surface-initiated NCA ring-opening polymerization to generate densely grafted assemblies of polymer chains that possess well-defined secondary structures and tunable surface properties. These polypeptide brushes complement their conformationally unordered counterparts that can be generated via surface-initiated polymerization of vinyl-type monomers and represent another step forward to biomimetic surfaces and interfaces.

36 MATERIALS SCIENCE↗

Influence of linkage chemistry and side-chain polarity on Ion 2 transport in click-functionalized polymerized ionic liquids.

Post-polymerization functionalization offers precise molecular weight control and enables the high-throughput investigation of structure−property relationships in polymer research. However, post-polymerization functionalization strategies often introduce additional linkage chemistry, and its role in the physical properties of polymerized ionic liquids (PILs) has yet to be explored. In this work, a series of PILs were synthesized using Cu(I)-catalyzed azide−alkyne cycloaddition (CuAAC), with comparison made to N-alkylation substitution chemistry. The triazole ring introduced by CuAAC chemistry was found to induce extensive ion aggregation and deteriorate ion transport. The impact of linkage chemistry on ion transport can be alleviated by incorporating polar ethylene glycol spacers in the side chain, achieving an ionic conductivity of 2.1 × 10−4 S/cm at 30 °C. Furthermore, the effect of polar spacer placement was explored, revealing that overall side-chain polarity, rather than polarity in the vicinity of the ionic group, governs ion aggregation and ion transport in PILs.

Shan, Naisong↗

Effect of Molecular Weight on the Ion Transport Mechanism in Polymerized Ionic Liquids

The unique properties of ionic liquids (ILs) have made them promising candidates for electrochemical applications. Polymerization of the corresponding ILs results in a new class of materials called polymerized ionic liquids (PolyILs). Though PolyILs offer the possibility to combine the high conductivity of ILs and the high mechanical strength of polymers, their conductivities are typically much lower than that of the corresponding small molecule ILs. In this study, seven PolyILs were synthesized having degrees of polymerization ranging from 1 to 333, corresponding to molecular weights (MW) from 482 to 160 400 g/mol. Depolarized dynamic light scattering, broadband dielectric spectroscopy, rheology, and differential scanning calorimetry were employed to systematically study the influence of MW on the mechanism of ionic transport and segmental dynamics in these materials. Finally, the modified Walden plot analysis reveals that the ion conductivity transforms from being closely coupled with structural relaxation to being strongly decoupled from it as MW increases.

36 MATERIALS SCIENCE↗

Heterogeneous Organochromium Catalysts for Stereoselective Isoprene Polymerization

In this study, heterogeneous organochromium catalysts have been developed via surface lithiation of traditional surface organometallic complexes to mediate stereoselective isoprene polymerization. Chemisorption of the molecular complex Cr(CH 2 SiMe 3 ) 4 on high surface area anatase titania nanoparticles as well as on a silica support led to the bipodal complexes Cr/TiO 2 and Cr/SiO 2 , respectively. Subsequent reductive lithium intercalation with n-butyllithium led to the formation of lower valent Cr 2+ species Cr/LTO and Cr/Li/SiO 2 . Alternatively, Cr(CH 2 SiMe 3 ) 4 was allowed to react with nBuLi-reduced anatase titania (LTO) to provide Cr/LTO Inv . Cr/LTO and Cr/Li/SiO 2 both polymerize isoprene with very high activities (154 and 174 kg molCr –1 h –1 , respectively) to provide polyisoprene with cis-1,4 selectivity up to 82% in toluene at 50 °C. On the other hand, Cr/SiO 2 provides polyisoprene with excellent trans-1,4 selectivity up to 98% (16 kg molCr –1 h –1 ), and Cr/TiO 2 was catalytically inactive. Cr/LTO Inv is less active and selective, and X-ray absorption spectroscopy (XAS) measurements of the precatalyst revealed the presence of a mixture of metallic Cr 0 , Cr 4+ , and only minor Cr 2+ species. Thus, surface lithiation can promote the formation of lower valent metal centers which enable stereocontrol in isoprene polymerizations and may be extended as a general protocol to other catalytic systems.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Distinctive Stereochemically Linked Cooperative Effects in Bimetallic Titanium Olefin Polymerization Catalysts

The complex (μ-Me 2 C-3,3'){(η 5 -cyclopentadienyl)[1-Me 2 Si-( t BuN)](TiMe 2 )} 2 (3) was prepared as a new binuclear catalyst motif for homogeneous olefin polymerization. Complex 3 exists as rac-3 and meso-3 diastereomers, which can be separated and characterized by solution NMR spectroscopy and single-crystal X-ray diffraction. While meso-3 has high thermal stability, rac-3 undergoes thermolysis in solution to quantitatively form the dimeric methylidene complex (μ-Me 2 C-3,3'){(η 5 -cyclopentadienyl)[1-Me 2 Si( t BuN)][(μ-CH 2 )Ti]}2 (rac-4). Activation of rac-3 and meso-3 with 1 equiv of Ph 3 C + B(C 6 F 5 ) 4 – yields [(μ-CMe 2 -3,3'){(η 5 -cyclopentadienyl)[1-Me 2 Si( t BuN)]} 2 (μ-CH 2 )(μ-CH 3 )Ti 2 ] + B(C 6 F 5 ) 4 – (5; rac-5 and meso-5, respectively). Interestingly, meso-5 is stable in the presence of an additional 1 equiv of Ph 3 C + B(C 6 F 5 ) 4 –, while rac-5 reacts to yield rac-[(μ-CMe2-3,3'){(η5-cyclopentadienyl)[1-Me2Si(tBuN)]}2(μ-CH2)[(TiCH3)(Ti-η1-Ph3C)]2+[B(C6F5)4–]2 (rac-6) as indicated by multinuclear NMR spectroscopy and DFT computation. meso-3 reacts with 2 equiv of B(C 6 F 5 ) 3 to yield meso-[(μ-CMe 2 -3,3'){(η 5 -cyclopentadienyl)[1-Me 2 Si( t BuN)]} 2 (μ-CH 2 )(μ-CH 3 )Ti 2 ]+MeB(C 6 F 5 ) 3 – (meso-7) containing the same meso-5 cation but with a MeB(C 6 F 5 ) 3 –counteranion. These findings, along with catalytic results, indicate that rac-3 and meso-3 remain structurally intact during polymerization, consistent with the observed diastereoselectivity effects. Under identical ethylene/1-octene copolymerization conditions, only activated bimetallic rac-3 produces appreciable polymer, with meso-3 exhibiting low activity, but both yield polymer with a branch density >2× that of the monometallic control [(3- t Bu-C 5 H 3 )SiMe 2 N t Bu]TiMe 2 (Ti 1 ). In ethylene/styrene copolymerizations, rac-3 produces polymers with 3.1× higher M n and 2.1× greater styrene incorporation versus Ti 1 , while meso-3 catalyzes only ethylene-free styrene homopolymerization. In 1-octene homopolymerizations, meso-3 + B(C 6 F 5 ) 3 (i.e., meso-7) produces highly isotactic poly-1-octene (mmmm 91.7%), while rac-3 + Ph 3 C + B(C 6 F 5 ) 4 – (i.e., rac-5), rac-3 + B(C 6 F 5 ) 3 (i.e., rac-7), and meso-3 + Ph 3 C + B(C 6 F 5 ) 4 – (i.e., meso-5) produce only atactic poly-1-octene. In conclusion, these bimetallic polymerization catalysts exhibit distinctive cooperative effects influencing product M n , tacticity, and comonomer selection, demonstrating that binuclear catalyst stereochemical factors are significant.

36 MATERIALS SCIENCE↗

Structural Characterization of β-Agostic Bonds in Pd-Catalyzed Polymerization

β-agostic Pd complexes are critical intermediates in catalytic reactions, such as olefin polymerization and Heck reactions. Pd β-agostic complexes, however, have eluded structural characterization, due to the fact that these highly unstable molecules are difficult to isolate. In this paper, we report the single-crystal X-ray and neutron diffraction characterization of β-agostic (α-diimine)Pd–ethyl intermediates in polymerization. Short C α –C β distances and acute Pd–C α –C β bond angles combined serve as unambiguous evidence for the β-agostic interaction. Finally, characterization of the agostic structure and the kinetic barrier for β-H elimination offer important insight into the fundamental understanding of agostic bonds and the mechanism of polymerization.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Cyclopropenimine superbases: Competitive initiation processes in lactide polymerization

Cyclopropenimine superbases were employed in this study to catalyze the ring-opening polymerization of lactide. Polymerization occurred readily in the presence and absence of alcohol initiators. Polymerizations in the absence of alcohol initiators revealed a competitive initiation mechanism involving deprotonation of lactide by the cyclopropenimine to generate an enolate. NMR and MALDI-TOF analysis of the poly(lactides) generated from cyclopropenimines in the absence of alcohol initiators showed acylated lactide and hydroxyl end groups. Finally, model studies and comparative experiments with guanidine and phosphazene catalysts revealed the subtle influence of the nature of the superbase on competitive initiation processes.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Graphene oxide as a radical initiator: Free radical and controlled radical polymerization of sodium 4-vinylbenzenesulfonate with graphene oxide

The free radical and controlled radical polymerization of sodium 4-vinylbenzenesulfonate using graphene oxide as a radical initiator was studied. This work demonstrates that graphene oxide can initiate radical polymerization in an aqueous solution without any additional initiator. Poly(sodium 4-vinylbenzenesulfonate) obtained via reversible addition fragmentation chain transfer polymerization had a controlled molecular weight with a very narrow polydispersity ranging between 1.01 and 1.03. Finally, the reduction process of graphene oxide as well as the resulting composite material properties were analyzed in detail.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Accessing siloxane functionalized polynorbornenes via vinyl-addition polymerization for CO 2 separation membranes

Here, the vinyl addition polymerization of norbornylbased monomers bearing polar functional groups is often problematic, leading to low molecular weight polymers in poor yield. Herein, we provide proof-of-principle evidence that addition-type homopolymers of siloxane substituted norbornyl-based monomers may be readily synthesized using the catalyst trans-[Ni(C 6 F 5 ) 2 (SbPh 3 ) 2 ]. Polymerizations using this catalyst reached moderate to high conversion in just 5 min of polymerization and produced siloxanesubstituted polymers with molecular weights exceeding 100 kg/mol. These polymers showed excellent thermal stability (T d ≥ 362 °C) and were cast into membranes that displayed high CO 2 permeability and enhanced CO 2 /N 2 selectivity as compared to related materials.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Open-to-Air RAFT Polymerization in Complex Solvents: From Whisky to Fermentation Broth.

We investigate the use of in situ enzyme degassing to facilitate the open-to-air reversible addition- fragmentation chain transfer (RAFT) polymerization of hydroxyethyl acrylate (HEA) in a wide range of complex aqueous solvents, including, beer, wine, liquor, and fermentation broth. This enzyme-assisted polymerization procedure is impressively robust, and poly(HEA) was attained with good control over molecular weight and a narrow dispersity in nearly all of the solvents tested. Kinetics experiments on HEA polymerization in whisky and spectroscopic analysis of the purified polymers suggest high end-group fidelity, as does the successful chain extension of a poly(HEA) macro chain transfer agent with narrow dispersity. These results suggest enzyme-assisted RAFT may be a powerful and underutilized tool for high-throughput screening and materials discovery and may simplify the synthesis of well-defined polymers in complex conditions.

Schneiderman, Deborah K.↗

Ion Mobilities, Transference Numbers, and Inverse Haven Ratios of Polymeric Ionic Liquids

We probe the ion mobilities, transference numbers, and inverse Haven ratio of ionic liquids and polymerized ionic liquids as a function of their molecular weight using a combination of atomistic equilibrium and nonequilibrium molecular dynamics simulations. In contrast to expectations, we demonstrate that the inverse Haven ratio increases with increasing degree of polymerization (N) and then decreases at larger N. For a fixed center of mass reference frame, we demonstrate that such results arise as a consequence of the strong cation–cation correlated motions, which exceed (in magnitude) the selfdiffusivity of cations. Together, our findings challenge the premise underlying the pursuit of pure polymeric ionic liquids as high transference number, single-ion conducting electrolytes.

36 MATERIALS SCIENCE↗