Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “phase pure”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 271 records · Page 15
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

Tetragonal BaCoO 3 : A Co 4+ Ferromagnetic Mott Insulator

We report the stabilization of the metastable body-centered tetragonal (BCT) phase of BaCoO 3 (BCT-BaCoO 3 ) under high-pressure (15 GPa) and hightemperature (1200 °C) conditions using a mixture precursor. This double perovskite adopts the EuTiO 3 -type structure (space group I4/mcm), as confirmed by powder Xray diffraction and high-resolution STEM. X-ray photoelectron spectroscopy indicates a predominant Co 4+ oxidation state without detectable oxygen vacancies. Magnetization and heat capacity measurements reveal ferromagnetic ordering at T C ∼ 107 K, attributable to the BCT-BaCoO 3 phase. Above this temperature, the mixed-phase sample exhibits Curie−Weiss paramagnetism, a low-spin to high-spin crossover upon cooling, and a possible intermediate-spin state at elevated temperatures. Resistivity data indicates insulating behavior with weak magnetoresistance. DFT and DFT + DMFT calculations suggest that the insulating state originates from an orbitally selective transition sensitive to the nominal valence of the Co-d shell. The metastable BCT-BaCoO 3 phase cannot be retained in pure form at ambient pressure but can be stabilized by embedding it in a disordered mixture, offering a potential route to discover and preserve other high-pressure phases under ambient conditions.

Magnetic properties↗
DOE OSTI2020

Phase retrieval for short wavelength orbital angular momentum beams using knife-edge diffraction

Laser beams operating in high order transverse modes, especially orbital angular momentum (OAM) modes, have been used increasingly in many frontier research areas. The characterization of these laser modes and the related component analysis can be carried out using the retrieved optical phase. However, conventional iterative phase retrieval methods, when applied to pure OAM modes, may fail because their convergence depends on the choice of the initial phase. Here, we present an improved phase retrieval method which can incorporate additional phase information obtained using knife-edge diffraction. Using no additional optics or few optics available in a wide spectral range, this method is particularly suitable for short wavelength lasers such as free-electron lasers (FELs) in the VUV, EUV, and X-ray regimes. Finally, this method has been tested using simulated beams, and successfully applied to experimentally generated beams from a HeNe laser and an FEL.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2020

Computationally Guided Investigation of the Optical Spectra of Pure β-UO 3

Single-phase β-UO 3 is synthesized by flash heating UO 2 (NO 3 )·6H 2 O in air to 450 °C and annealing for 60 h under the same conditions. For the first time, we report the Raman spectra of pure β-UO 3 . To facilitate the assignment of Raman and infrared vibrational modes, we use density functional theory with density functional perturbation theory. By employing a novel analysis scheme that includes the mode frequencies as well as a quantitative analysis of the mode eigenvectors, we assign the observed spectral features to individual chemical modes. In particular, the density functional theory optimized structure, observed Raman spectrum, and eigenvector analysis suggest the presence of four crystallographically distinct uranyl ions, one more than has previously been suggested.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

High temperature thermochemical energy storage materials

Disclosed are high enthalpy thermochemical energy storage materials that exhibit high thermal conductivity and stability at high temperature reaction conditions. Disclosed materials include hydride-based alloys that can undergo high temperature reversible hydrogenation/dehydrogenation reactions without phase change of any metal or metalloid components of the alloy. The materials undergo a reversible exothermic hydrogenation reaction to form a metal hydride and a ternary alloy that includes a high thermal conductivity metal that, in its pure state, would exhibit a phase change at the hydrogenation reaction conditions.

Ward, Patrick A.↗
DOE OSTI2021

Exploring the Role of Humidity, Temperature, and Mixed Ionic and Electronic Conductivity on SOFC Anode Electrocatalysis

Infiltration of nanoscale electrocatalysts into Ni/yttria-stabilized zirconia (Ni-YSZ) cermets has been shown to improve the electrochemical performance of solid oxide fuel cell (SOFC) anodes. While infiltrated electrodes in SOFCs result in improved cell performance, long-term operation leads to coarsening of the infiltrated nanoparticles and negates the short-term performance improvements. This study explores the roles of humidity, temperature, and number of cycles of nanocatalyst infiltration in improving mixed conduction within the Ni-YSZ electrode. Two mixed conduction phases were studied: Gd 0.1 Ce 0.9 O 2-δ (GDC) as an infiltrant into Ni-YSZ electrodes, and Ni/transition metal doped-YSZ electrodes infiltrated with Ni. Analysis of impedance data from these cells shows improved electrochemical performance in infiltrated cells with mixed conduction compared with infiltrated cells containing purely ionic and electronic conducting phases. Improved anode performance is attributed to the availability of electronic pathways through predominantly ionic-conducting phases to connect distant Ni nanoparticles and/or Ni grains.

25 ENERGY STORAGE↗
DOE OSTI2023

Automated phase segmentation and quantification of high-resolution TEM image for alloy design

In the alloy design and development process, a wealth of atomically resolved structural high-resolution transmission electron microscopy (HRTEM) images are produced. Identifying the different nano-precipitate phases and tracking their evolution under various compositions and during manufacturing or post-processing requires hundreds of HRTEM images and thousands of precipitates. The nanoscopic phase information labeling and analysis purely relies on humans are prohibitively costly and time-consuming, sometimes not reliable because of the lack of authoritative knowledge. Here, in this work, we develop a novel unsupervised machine learning approach coupled with adaptive computer vision techniques with features in the Fourier space to automatically determine the number of phases and segment/quantify the phases with nanoscale resolution, allowing for quantitative correlation between nanostructure formation, processing and functional properties. To automate the phase extraction/quantification and ascertain its applicability, we have applied the developed framework to the HRTEM images from several alloy systems, processing conditions, image magnifications, and phase types and morphologies (precipitates, nano-twins, stacking faults, crystalline matrix, and amorphous structures) for verification. This study paves the road for compression, visualization, and translation of raw image structural data into physically relevant information in real-time with minimal human supervision. It shows the promise of enabling high-throughput materials characterization for the acceleration of alloy manufacturing and design.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Laboratory Electrical Conductivity of Marine Gas Hydrate

Methane hydrate was synthesized from pure water ice and flash frozen seawater, with varying amounts of sand or silt added. Electrical conductivity was determined by impedance spectroscopy, using equivalent circuit modeling to separate the effects of electrodes and to gain insight into conduction mechanisms. Silt and sand increase the conductivity of pure hydrate; we infer by contaminant NaCl contributing to conduction in hydrate, to values in agreement with resistivities observed in well logs through hydrate–saturated sediment. The addition of silt and sand lowers the conductivity of hydrate synthesized from seawater by an amount consistent with Archie's law. Here, all samples were characterized using cryogenic scanning electron microscopy and energy dispersive spectroscopy, which show good connectivity of salt and brine phases. Electrical conductivity measurements of pure hydrate and hydrate mixed with silt during pressure–induced dissociation support previous conclusions that sediment increases dissociation rate.

58 GEOSCIENCES↗
DOE OSTI2020

Characterizing Baselines and Change in Gas Hydrate Systems using EM Methods

The objective of this project was to advance our understanding of gas hydrate systems in nature by characterizing their electrical properties in the field and in the laboratory. In the laboratory measurements, methane hydrate was synthesized from pure water ice and flash frozen seawater, with varying amounts of sand or silt added. Electrical conductivity was determined by impedance spectroscopy, using equivalent circuit modeling to separate the effects of electrodes and to gain insight into conduction mechanisms. Silt and sand increase the conductivity of pure hydrate, inferred to be contaminant NaCl contributing to conduction in hydrate, to a peak conductivity in agreement with peak resistivities observed in well logs through massive hydrate (3,000--10,000 Ωm). The addition of silt and sand lowers the conductivity of hydrate synthesized from seawater, by an amount consistent with Archie's Law. All samples were characterized using cryogenic scanning electron microscopy and energy dispersive spectroscopy, which shows good connectivity of salt and brine phases. Electrical conductivity measurements of pure hydrate and hydrate mixed with silt during pressure-induced dissociation supports previous conclusions that sediment increases dissociation rate. In order to characterize gas hydrate systems in the field, we collected 360 line kilometers of controlled-source electromagnetic data on Walker Ridge 313, Orca Basin (WR100), Mad Dog (GC781), and Green Canyon 955 in the Gulf of Mexico, all areas with known or seismically inferred gas hydrate deposits and which have be drilled or targeted for future drilling. We deep-towed an EM transmitter that generates an alternating electric field which propagates through the seafloor geology. Data were recorded on 6 receivers towed behind the transmitter at distances between 550 and 1550 m. In the presence of conductive geology, the electric fields will be attenuated, and conversely, in resistive geology the fields will be preserved. Our data were inverted using a 2D inversion method that first optimizes the model-data misfit, then finds the smoothest model fitting the data. This ensures that resistivity structures present in the final model are likely necessary. At each of the proposed drilling sites we found increased resistivity, interpreted as increased hydrate concentrations. However, not only were the primary drilling sites not always more resistive than the alternate sites, at WR313 the strongest resistors were not at the locations targeted for drilling.

03 NATURAL GAS↗
DOE OSTI2020

Structure of supported DPPC/cholesterol bilayers studied via X-ray reflectivity

The electron density profile of bilayers of DPPC/cholesterol mixtures supported on semiconductor grade silicon substrates were studied with the objective of determining how the proximity of a solid interface modifies the phase diagram of mixed bilayers. The bilayers were studiedin situimmersed in waterviasynchrotron X-ray reflectivity (XRR). Measurements were performed as a function of temperature through the main phase transition and cholesterol mole fractions up to 40%. Analysis of XRR yields the bilayer thickness, roughness and leaflet asymmetry. We find that the structure of the pure DPPC bilayers in the gel phase is in agreement with previous X-ray measurements of supported bilayers depositedviavesicle fusion and multilamellar vesicles but show more clearly defined features than measurements made on films formed using Langmuir-Blodget Langmuir-Shaffer (LB) deposition. Examination of bilayer thicknessvs.temperature shows that the melting temperature for supported bilayers is shifted upwards by approximately 4 degrees C relative to multilamellar vesicles and that the melting temperature decreases with increasing cholesterol content up to 20%. For pure DPPC bilayers the leaflets melt in two stages with the distal leaflet melting first. For cholesterol concentrations of 10% and 20% there is no clear indication of separate melting. Finally. for 33% and 40% cholesterol content no clear transition is seen in the bilayer thickness, but an abrupt change in roughness indicates possible microdomain formation in the 40% cholesterol sample.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Translation of "Contribution a l'etude du diagramme pression-temperature du beryllium pur" (Contribution to the Study of the Pressure-Temperature Diagram of Pure Beryllium)

An unusual feature of beryllium’s phase diagram is the transition from a hexagonal close packed (hcp, or α) to a body-centered cubic (bcc, or β) structure ~20 K below the normal melting temperature of T melt ≈ 1560 K. An early thermal analysis of 99.7% pure Be found two arrests1 : one at 1533-1536 K and another at 1551-1557 K. Without ruling out an allotropic transformation in Be itself, Sloman attributed the first of these to solidification of a Be-BeO eutectic. Losano observed only the higher of the two in 99.962% Be, seeming to confirm the notion that the lower feature was an artifact of impurity. Teitel (99.4%) also measured two arrests and attributed the lower to impurity, but questioned whether oxygen was the culprit.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Continuous caustic aqueous phase electrochemical reforming (CAPER) of ethanol for producing compressed hydrogen

Caustic Aqueous Phase Electrochemical Reforming (CAPER) of ethanol produces pure compressed H 2 at lower voltages, temperatures, and energy requirements than conventional electrolysis, while capturing carbonaceous products. The CAPER flow reactor consists of stainless steel endplates, stainless steel current collectors, and a Teflon flow field. The electrodes are prepared using commercial palladium nanoparticles on carbon support for the anode and platinum nanoparticles on carbon support for the cathode. The catalyst metal loading was 1 mgcm –2 on a 10cm 2 carbon cloth for both electrodes. Our CAPER reactor produces pure H 2 at 80bar and 80°C applying voltages at ≤0.5V. The only gas-phase product detected was H 2 and any carbonaceous products were contained in the liquid phase. The H 2 was produced with 97±4% faradaic efficiency. Further, operating at smaller electrode separation distances (4mm) and 80°C increased the current density. The highest lower heating value efficiency achieved was 28% at a flow rate of 0.05mLmin –1 and an applied voltage of 0.5V. The compressed H 2 was produced at ≤20 kWh kg –1 , which is much lower than electrolysis systems that require upwards of 50 kWh kg –1 .

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Evading strength and ductility trade-off in an inverse nacre structured magnesium matrix nanocomposite

Mimicking nacre structure is an often-used strategy for developing materials which combine high strength and high toughness. Here, a novel strategy, named inverse nacre structure, is proposed where elongated and curled soft constituents are embedded in a matrix of hard constituent to form an ordered brick-and-mortar arrangement. This strategy is demonstrated in a particle reinforced metal matrix composite, using pure Mg as the soft phase and SiC nanoparticle reinforced Mg as the hard phase. In this work, the resulting nanocomposite yields high strength, and especially high tensile elongation which is five times that of the homogeneous counterpart. The superior comprehensive strengthening-toughening effect originates from the tailored inverse nacre structure which enables a stable microcrack-multiplication process by sufficiently promoting strain hardening so as to avoid any significant decrease in post-ultimate tensile strength. This strategy, while demonstrated here for the specific case of particle reinforced Mg, is not restricted to any particular material system but constitutes a generic pathway for the development of high-performance materials for engineering applications.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Bulk high-temperature superconductivity in pressurized tetragonal La 2 PrNi 2 O 7

The Ruddlesden–Popper (R–P) bilayer nickelate, La 3 Ni 2 O 7 , was recently found to show signatures of high-temperature superconductivity (HTSC) at pressures above 14 GPa . Subsequent investigations achieved zero resistance in single-crystalline and polycrystalline samples under hydrostatic pressure conditions. Yet, obviousdiamagnetic signals, the other hallmark of superconductors, are still lacking owing to the flamentary nature with low superconducting volume fraction. The presence of a new 1313 polymorph and competing R–P phases obscured proper identification of the phase for HTSC. Thus, achieving bulk HTSC and identifying the phase at play are the most prominent tasks. Here we address these issues in the praseodymium (Pr)-doped La 2 PrNi 2 O 7 polycrystalline samples. We find that substitutions of Pr for La efectively inhibit the intergrowth of diferent R–P phases, resulting in a nearly pure bilayer structure. For La 2 PrNi 2 O 7 , pressure-induced orthorhombic to tetragonalstructural transition takes place at P c ≈ 11 GPa, above which HTSC emerges gradually on further compression. The superconducting transition temperatures at 18–20 GPa reach $T$ $^{onset}_{c}$ = $82.5$ $K$ and $T$ $^{zero}_{c}$ = $60$ $K$, which are the highest values, to our knowledge, among known nickelate superconductors. Importantly, bulk HTSC was testified by detecting clear diamagnetic signals below about 75 K with appreciable superconducting shielding volume fractions at a pressure of above 15 GPa. Further, our results not only resolve the existing controversies but also provide directions for exploring bulk HTSC in the bilayer nickelates.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2025

Constraining the phase shift of relativistic species in DESI BAOs

In the early Universe, neutrinos decouple quickly from the primordial plasma and propagate without further interactions. The impact of free-streaming neutrinos is to create a temporal shift in the gravitational potential that impacts the acoustic waves known as baryon acoustic oscillations (BAOs), resulting in a non-linear spatial shift in the Fourier-space BAO signal. In this work, we make use of and extend upon an existing methodology to measure the phase shift amplitude $\beta _{\phi }$ and apply it to the Dark Energy Spectroscopic Instrument (DESI) Data Release 1 (DR1) BAOs with an anisotropic BAO fitting pipeline. We validate the fitting methodology by testing the pipeline with two publicly available fitting codes applied to highly precise cubic box simulations and realistic simulations representative of the DESI DR1 data. We find further study towards the methods used in fitting the BAO signal will be necessary to ensure accurate constraints on $\beta _{\phi }$ in future DESI data releases. Using DESI DR1, we present individual measurements of the anisotropic BAO distortion parameters and the $\beta _{\phi }$ for the different tracers, and additionally a combined fit to $\beta _{\phi }$ resulting in $\beta _{\phi } = 2.7 \pm 1.7$. After including a prior on the distortion parameters from constraints using Planck we find $\beta _{\phi } = 2.7^{+0.60}_{-0.67}$ suggesting $\beta _{\phi } > 0$ at 4.3$\sigma$ significance. This result may hint at a phase shift that is not purely sourced from the standard model expectation for $N_{\rm {eff}}$ or could be a upwards statistical fluctuation in the measured $\beta _{\phi }$; this result relaxes in models with additional freedom beyond Lambda-cold dark matter.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2025

String-based model with Hagedorn temperature of 𝑇 𝐻 ∼ 300 MeV describes the spectrum of mesons and glueballs

We consider the thermodynamics of a color-confined phase of quantum chromodynamics (QCD) and pure gauge theory within a string-inspired corresponding to a physical spatial dimension, 𝑑 = 3. We show that the physical mass spectrum of massive mesons—in both the strange and nonstrange sectors separately—is reasonably well described and extended by the exponential mass spectrum of open strings, 𝜌⁡(𝑚), characterized by a unique Hagedorn temperature 𝑇 𝐻 = $\sqrt3⁢𝜎/2⁢𝜋$, expressed by the string tension 𝜎. This 𝑇 𝐻 is the value appropriate for 𝑑 = 3 spatial dimensions and is of the order of 𝑇 𝐻 ∼ 300 MeV for typical values of the string tension. It is much larger than the values of 𝑇 𝐻 which have been phenomenologically extracted so far to describe the meson spectrum. Glueball states in pure gauge theory, modeled by closed strings, exhibit a similarly large Hagedorn temperature, highlighting a universal feature of the exponential spectrum. We further analyze the thermodynamic properties of the equation of state at finite temperature and demonstrate that, in the confined phase, the string models agree with lattice QCD results. This lends further support to the recent interpretation of the QCD phase diagram that incorporates strings as relevant degrees of freedom.

Phase transitions↗
DOE OSTI2022

Quasi-static and dynamic response of a Cu/Nb composite following equal channel angular extrusion

The article presents a study of the plastic properties of a Cu–18%Nb composite following equal channel angular extrusion under both low- and high-strain rate loadings. The microstructures are characterized by optical and scanning electron microscopy as well as electron backscatter diffraction. Comparisons are also made with a Cu–50%Nb laminate made by accumulative roll bonding. Textures obtained within the respective phases in the extruded composite closely mimic those previously reported for the pure components alone (Cu, Nb). Grain sizes of the major phase (Cu) exhibit broad distributions, due largely to partial recrystallization during the extrusion process. Further re-crystallization is obtained within localized deformation bands produced at high strain rates (3 × 10 3 s –1 ). While the degree of anisotropy and the strain rate sensitivity of the composite response are similar to those of pure Cu after extrusion, the strength levels of the composite are somewhat greater, falling broadly between those obtained in the pure components after extrusion to comparable plastic strains. Furthermore, the implications for selection of composite composition and processing for achieving higher strengths are briefly discussed.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Crystallographic texture formation in Fe-9wt%Si alloy during deformation and phase transition at high pressure

SUMMARY The seismic anisotropy of the Earth's solid inner core has been the topic of much research. It could be explained by the crystallographic preferred orientation (CPO) developing during convection. The likely phase is hexagonal close-packed iron (hcp), alloyed with nickel and some lighter elements. Here we use high energy synchrotron X-rays to study CPO in Fe-9wt%Si, uniaxially compressed in a diamond anvil cell in radial geometry. The experiments reveal that strong preferred orientation forms in the low-pressure body-centred cubic (bcc) phase that appears to be softer than pure iron. CPO is attributed to dominant {110}<111> slip. The onset of the bcc→hcp transition occurs at a pressure of ≈15 GPa, and the alloy remains in a two phase bcc + hcp state up to 40 GPa. The hcp phase forms first with a distinct {11$\bar{2}$0} maximum perpendicular to compression. Modelling shows that this is a transformation texture, which can be described by Burgers orientation relationship with variant selection. Experimental results suggest that bcc grains oriented with <100> parallel to compression transform into hcp first. The CPO of the hcp changes only slowly during further pressure and deviatoric stress increase at ambient temperature. After heating to 1600 K, a change in the hcp CPO is observed with alignment of (0001) planes perpendicular to compression that can be interpreted as dominant (0001)<11$\bar{2}$0> slip, combined with {10$\bar{1}$2}<$\bar{1}$011> mechanical twinning, which is similar to the deformation modes suggested previously for pure hcp iron at inner core conditions.

Vasin, Roman N.↗