Results for “pattern clustering” — Page 15

DOE OSTI2023

Extension of Large Fire Emissions From Summer to Autumn and Its Drivers in the Western US

Abstract Burned areas in the western US have increased ten‐fold since 1980s, which are attributable to multiple factors, including increasing heat, changing precipitation patterns, and extended drought. To better understand how these factors contribute to large fire emissions (gridded monthly fire emissions >95th percentile of all the fire emissions in the western US; 0.009 Gg/month), we build a machine learning model to predict fire emissions (PM 2.5 ) over the western US at 0.25° resolution, interpreted using explainable artificial intelligence (XAI). From the predictor contributions derived from XAI, we conduct k‐means clustering analysis to identify four clusters of predictor variables representing different drivers of large fire emissions. The four clusters feature the contributions of fuel load (Cluster 1) and different levels of dryness (Cluster 2–4), controlled by fuel moisture, drought condition, and fire‐favorable large‐scale meteorological patterns featuring high temperature, high pressure, and low relative humidity. In the past two decades, large fire emissions peak in summer. However, large fire emissions increased significantly in September and October in 2010–2020 relative to 2000–2009, extending the peak large fire emissions from summer to autumn. The larger enhancements of large fire emissions during autumn compared to summer are contributed by decreased fuel moisture, along with more frequent concurrent fire‐favorable large‐scale meteorological patterns and drought. These results highlight fuel drying as a common driver supported by multiple drivers, such as warmer temperature and more frequent synoptic patterns favorable for fires, in increasing the autumn risk of large fire emissions across the western US.

54 ENVIRONMENTAL SCIENCES↗

DOE OSTI2021

Signatures of large-scale cold fronts in the optically-selected merging cluster HSC J085024+001536

Abstract We represent a joint X-ray, weak-lensing, and optical analysis of the optically-selected merging cluster, HSC J085024+001536, from the Subaru HSC-SSP survey. Both the member galaxy density and the weak-lensing mass map show that the cluster is composed of south-east and north-west components. The two-dimensional weak-lensing analysis shows that the south-east component is the main cluster, and the sub-cluster and main cluster mass ratio is $0.32^{+0.75}_{-0.23}$. The north-west sub-cluster is offset by ∼700 kpc from the main cluster center, and their relative line-of-sight velocity is ∼1300 km s−1 from spectroscopic redshifts of member galaxies. The X-ray emission is concentrated around the main cluster, while the gas mass fraction within a sphere of 1′ radius of the sub-cluster is only $f_{\mathrm{gas}}=4.0^{+2.3}_{-3.3}\%$, indicating that the sub-cluster gas was stripped by ram pressure. An X-ray residual image shows three arc-like excess patterns, of which two are symmetrically located at ∼550 kpc from the X-ray morphological center, and the other is close to the X-ray core. The excess close to the sub-cluster has a cold-front feature where dense-cold gas and thin-hot gas contact. The two outer excesses are tangentially elongated about ∼450–650 kpc, suggesting that the cluster is merged with a non-zero impact parameter. Overall features revealed by the multi-wavelength datasets indicate that the cluster is at the second impact or later. Since the optically-defined merger catalog is unbiased for merger boost of the intracluster medium, X-ray follow-up observations will pave the way to understand merger physics at various phases.

Tanaka, Keigo↗

DOE OSTI2020

PERSIANN Dynamic Infrared–Rain Rate (PDIR-Now): A Near-Real-Time, Quasi-Global Satellite Precipitation Dataset

This study presents the Precipitation Estimation from Remotely Sensed Information Using Artificial Neural Networks–Dynamic Infrared Rain Rate (PDIR-Now) near-real-time precipitation dataset. This dataset provides hourly, quasi-global, infrared-based precipitation estimates at 0.04° × 0.04° spatial resolution with a short latency (15–60 min). It is intended to supersede the PERSIANN–Cloud Classification System (PERSIANN-CCS) dataset previously produced as the near-real-time product of the PERSIANN family. We first provide a brief description of the algorithm’s fundamentals and the input data used for deriving precipitation estimates. Second, we provide an extensive evaluation of the PDIR-Now dataset over annual, monthly, daily, and subdaily scales. Last, the article presents information on the dissemination of the dataset through the Center for Hydrometeorology and Remote Sensing (CHRS) web-based interfaces. The evaluation, conducted over the period 2017–18, demonstrates the utility of PDIR-Now and its improvement over PERSIANN-CCS at all temporal scales. Specifically, PDIR-Now improves the estimation of rain/no-rain days as demonstrated by a critical success index (CSI) of 0.53 compared to 0.47 of PERSIANN-CCS. In addition, PDIR-Now improves the estimation of seasonal and diurnal cycles of precipitation as well as regional precipitation patterns erroneously estimated by PERSIANN-CCS. Finally, an evaluation is carried out to examine the performance of PDIR-Now in capturing two extreme events, Hurricane Harvey and a cluster of summer thunderstorms that occurred over the Netherlands, where it is shown that PDIR-Now adequately represents spatial precipitation patterns as well as subdaily precipitation rates with a correlation coefficient (CORR) of 0.64 for Hurricane Harvey and 0.76 for the Netherlands thunderstorms.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

NASA NTRS2020

PERSIANN Dynamic Infrared–Rain Rate (PDIR-Now): A Near-Real-Time, Quasi-Global Satellite Precipitation Dataset

This study presents the Precipitation Estimation from Remotely Sensed Information Using Artificial Neural Networks–Dynamic Infrared Rain Rate (PDIR-Now) near-real-time precipitation dataset. This dataset provides hourly, quasi-global, infrared-based precipitation estimates at 0.04° × 0.04° spatial resolution with a short latency (15–60 min). It is intended to supersede the PERSIANN–Cloud Classification System (PERSIANN-CCS) dataset previously produced as the near-real-time product of the PERSIANN family. We first provide a brief description of the algorithm’s fundamentals and the input data used for deriving precipitation estimates. Second, we provide an extensive evaluation of the PDIR-Now dataset over annual, monthly, daily, and subdaily scales. Last, the article presents information on the dissemination of the dataset through the Center for Hydrometeorology and Remote Sensing (CHRS) web-based interfaces. The evaluation, conducted over the period 2017–18, demonstrates the utility of PDIR-Now and its improvement over PERSIANN-CCS at all temporal scales. Specifically, PDIR-Now improves the estimation of rain/no-rain days as demonstrated by a critical success index (CSI) of 0.53 compared to 0.47 of PERSIANN-CCS. In addition, PDIR-Now improves the estimation of seasonal and diurnal cycles of precipitation as well as regional precipitation patterns erroneously estimated by PERSIANN-CCS. Finally, an evaluation is carried out to examine the performance of PDIR-Now in capturing two extreme events, Hurricane Harvey and a cluster of summer thunderstorms that occurred over the Netherlands, where it is shown that PDIR-Now adequately represents spatial precipitation patterns as well as subdaily precipitation rates with a correlation coefficient (CORR) of 0.64 for Hurricane Harvey and 0.76 for the Netherlands thunderstorms.

Rainfall↗

NASA NTRS2014

Clustering Days with Similar Airport Weather Conditions

On any given day, traffic flow managers must often rely on past experience and intuition when developing traffic flow management initiatives that mitigate imbalances between the aircraft demand and the weather impacted airport capacity. The goal of this study was to build on recent efforts to apply data mining classification and clustering algorithms to vast archives of historical weather and air traffic data to identify patterns and past decisions that can ultimately inform day-of-operations decision-making. More specifically, this study identified similar weather impacted days at select U.S. airports, and analyzed the traffic management initiatives implemented on these representative days. The identification of the similar days was accomplished by applying a decision tree algorithm to the hourly Localized Aviation Model Output Statistics Program observations and the arrival delays for Newark Liberty International Airport. The branches from the trained decision tree were subsequently pruned to identify four weather conditions that resulted in medium to high delays for the arrivals scheduled to Newark in 2012. Using these weather conditions, four, daily airport-level Weather Impacted Traffic Index values were calculated using the Localized Aviation Model Output Statistics Program observations and the 2012 scheduled arrival counts from the FAAs Aviation System Performance Metric system. The four, daily Weather Impacted Traffic Index values for 2012 were subsequently clustered using an Expectation Maximization clustering algorithm, and nine unique types of weather days at Newark were identified. By far the most prominent type of day at Newark was a day associated with relatively good weather conditions, where there was little convective activity, winds were low, ceilings and visibility were high and there was little precipitation. Moderate levels of convective activity characterized the next most prominent type of day. Days with persistently high winds or low ceiling and visibility levels were relatively rare in 2012. Lastly, the frequency at which Ground Delay Programs, Ground Stops and Miles-in-Trail restrictions were implemented on each of the typical types of days at Newark were analyzed. Based on the results, it does appear as if the usage of Miles-in-Trail, Ground Delay Program and Ground Stop restrictions correlates well with the severity of the weather associated with each unique type of weather impacted day at Newark. Furthermore, the results demonstrate that it is feasible to use historical weather and air traffic archives to provide guidance on the types of traffic management restrictions to implement in response to the weather conditions impacting an airport.

traffic flow management↗

NASA NTRS2014

Clustering Days with Similar Airport Weather Conditions

On any given day, traffic flow managers must often rely on past experience and intuition when developing traffic flow management initiatives that mitigate imbalances between the aircraft demand and the weather impacted airport capacity. The goal of this study was to build on recent efforts to apply data mining classification and clustering algorithms to vast archives of historical weather and air traffic data to identify patterns and past decisions that can ultimately inform day-of-operations decision-making. More specifically, this study identified similar weather impacted days at select U.S. airports, and analyzed the traffic management initiatives implemented on these representative days. The identification of the similar days was accomplished by applying a decision tree algorithm to the hourly Localized Aviation Model Output Statistics Program observations and the arrival delays for Newark Liberty International Airport. The branches from the trained decision tree were subsequently pruned to identify four weather conditions that resulted in medium to high delays for the arrivals scheduled to Newark in 2012. Using these weather conditions, four, daily airport-level Weather Impacted Traffic Index values were calculated using the Localized Aviation Model Output Statistics Program observations and the 2012 scheduled arrival counts from the FAAs Aviation System Performance Metric system. The four, daily Weather Impacted Traffic Index values for 2012 were subsequently clustered using an Expectation Maximization clustering algorithm, and nine unique types of weather days at Newark were identified. By far the most prominent type of day at Newark was a day associated with relatively good weather conditions, where there was little convective activity, winds were low, ceilings and visibility were high and there was little precipitation. Moderate levels of convective activity characterized the next most prominent type of day. Days with persistently high winds or low ceiling and visibility levels were relatively rare in 2012. Lastly, the frequency at which Ground Delay Programs, Ground Stops and Miles-in-Trail restrictions were implemented on each of the typical types of days at Newark were analyzed. Based on the results, it does appear as if the usage of Miles-in-Trail, Ground Delay Program and Ground Stop restrictions correlates well with the severity of the weather associated with each unique type of weather impacted day at Newark. Furthermore, the results demonstrate that it is feasible to use historical weather and air traffic archives to provide guidance on the types of traffic management restrictions to implement in response to the weather conditions impacting an airport.

weather↗

DOE OSTI2025

Computationally Guided and Experimentally Validated Design of Custom Chelators for Critical Mineral Recovery

Selective, high throughput separation of target critical metals from complex environments such as fly ash leachates and mining process streams presents a significant challenge for economical production. Custom chelators and sorbents are an attractive technology for selective metal extraction, however it can be difficult to predict their performance, and significant experimental efforts are often required to develop chelating technologies. Here, we present a computational strategy focused on modelling chelator-metal binding interactions and benchmark these results versus experimental data. A computational pipeline combining forcefield, semiempirical, and meta-GGA methods with a thermodynamic framework optimized for error cancellation has been developed to predict binding energies of chelator complexes towards critical mineral recovery applications. This approach, originally validated on [2.2.2] cryptates binding mono- and divalent cations, demonstrated robust predictive capabilities with an R2 of 0.850 against experimental aqueous binding energies. The workflow includes metadynamics for exploring high-dimensional potential energy surfaces and a cluster-continuum model for accurate yet computationally efficient solvation modeling. Error cancellation between solvation energies of free and chelator-coordinated ions enables faster convergence, even with finite cluster sizes. Initial studies on the cryptates revealed consistent metal-ligand coordination patterns, with systematic variations influenced by ion size and charge, highlighting key structural features linked to binding selectivity. Further studies of a proprietary chelator have resulted in identification of previously unreported selectivity towards economically significant metals, which in-house experiments have confirmed, demonstrating the feasibility of this approach. By applying this methodology to new chelators targeting critical minerals such as lithium, cobalt, nickel and other strategic metals, we aim to accelerate the discovery of next-generation chelators for efficient recovery, recycling, and separation processes. This computational framework serves as the backbone of a high-throughput design pipeline tailored for sustainable resource utilization and may be applied to a wide range of systems to meet experimental needs.

computational materials↗

NASA NTRS1994

The Large Impact Process Inferred from the Geology of Lunar Multiring Basins

The study of the geology of multiring impact basins on the Moon over the past ten years has given us a rudimentary understanding of how these large structures have formed and evolved on the Moon and other bodies. Two-ring basins on the Moon begin to form at diameters of about 300 km; the transition diameter at which more than two rings appear is uncertain, but it appears to be between 400 and 500 km in diameter. Inner rings tend to be made up of clusters or aligned segments of massifs and are arranged into a crudely concentric pattern; scarp-like elements may or may not be present. Outer rings are much more scarp-like and massifs are rare to absent. Basins display textured deposits, interpreted as ejecta, extending roughly an apparent basin radius exterior to the main topographic rim. Ejecta may have various morphologies, ranging from wormy and hummocky deposits to knobby surfaces; the causes of these variations are not known, but may be related to the energy regime in which the ejecta are deposited. Outside the limits of the textured ejecta are found both fields of satellitic craters (secondaries) and light plains deposits. Impact melt sheets are observed on the floors of relatively unflooded basins. Samples of impact melts from lunar basins have basaltic major-element chemistry, characterized by K, rare-earth elements (REE), P, and other trace elements of varying concentration (KREEP); ages are between 3.8 and 3.9 Ga. These lithologies cannot be produced through the fusion of known pristine (plutonic) rock types, suggesting the occurrence of unknown lithologies within the Moon. These melts were probably generated at middle to lower crustal levels. Ejecta compositions, preservation of pre-basin topography, and deposit morphologies all indicate that the excavation cavity of multiring basins is between about 0.4 and 0.6 times the diameter of the apparent crater diameter. Basin depths of excavation can be inferred from the composition of basin ejecta. A variety of mechanisms has been proposed to account for the formation of basin rings but none of them are entirely plausible. Mechanisms can be divided into two broad groups: (1) forcible uplift due to fluidization of the target; (2) concentric, brittle, fracturing and failure of the target, on regional (megaterraces) to global scales (lithospheric fracturing). Most basin rings are spaced at a constant factor on all planets. Evidence supports divergent ringforming models, so it may be that the ring-locating mechanism differs from the ring-forming mechanism. Thus, large-scale crustal foundering (megaterracing) could occur along concentric zones of weakness created by some type of resonant wave mechanism (fluidization and uplift); such immediate crustal adjustment could then be followed by long-term adjustment of the fractured lithosphere.

Spudis, Paul D.↗

NASA NTRS1996

Development of Collaborative Research Initiatives to Advance the Aerospace Sciences-via the Communications, Electronics, Information Systems Focus Group

The primary goal of the Adaptive Vision Laboratory Research project was to develop advanced computer vision systems for automatic target recognition. The approach used in this effort combined several machine learning paradigms including evolutionary learning algorithms, neural networks, and adaptive clustering techniques to develop the E-MOR.PH system. This system is capable of generating pattern recognition systems to solve a wide variety of complex recognition tasks. A series of simulation experiments were conducted using E-MORPH to solve problems in OCR, military target recognition, industrial inspection, and medical image analysis. The bulk of the funds provided through this grant were used to purchase computer hardware and software to support these computationally intensive simulations. The payoff from this effort is the reduced need for human involvement in the design and implementation of recognition systems. We have shown that the techniques used in E-MORPH are generic and readily transition to other problem domains. Specifically, E-MORPH is multi-phase evolutionary leaming system that evolves cooperative sets of features detectors and combines their response using an adaptive classifier to form a complete pattern recognition system. The system can operate on binary or grayscale images. In our most recent experiments, we used multi-resolution images that are formed by applying a Gabor wavelet transform to a set of grayscale input images. To begin the leaming process, candidate chips are extracted from the multi-resolution images to form a training set and a test set. A population of detector sets is randomly initialized to start the evolutionary process. Using a combination of evolutionary programming and genetic algorithms, the feature detectors are enhanced to solve a recognition problem. The design of E-MORPH and recognition results for a complex problem in medical image analysis are described at the end of this report. The specific task involves the identification of vertebrae in x-ray images of human spinal columns. This problem is extremely challenging because the individual vertebra exhibit variation in shape, scale, orientation, and contrast. E-MORPH generated several accurate recognition systems to solve this task. This dual use of this ATR technology clearly demonstrates the flexibility and power of our approach.

Knasel, T. Michael↗

NASA NTRS2019

Cluster Analysis of Spectroscopic Line Profiles and EUV Emission in RMHD Simulations and Observations of the Solar Atmosphere

Spatially-resolved observations from the IRIS, SDO/AIA, and other space mission and ground-based telescopes, coupled with realistic 3D RMHD simulations, are a powerful tool for analysis of processes in the solar atmosphere. To better understand the dynamical and thermodynamic properties in the simulation data and their connection to observations, it is essential to determine similarities in the behaviors of the synthesized and observed emission. However, the complexity of observational data and physical processes makes comparison of observations and modeling results difficult. In this work, we show the initial results of application of K-Means clustering (unsupervised machine learning) algorithm to two different problems: 1) recognition of the typical spectroscopic line profiles observed by IRIS during solar flares and their typical dynamic behavior; 2) recognition of shocks and heating events in synthetic AIA emission data obtained from StellarBox quiet-Sun simulations. The average silhouette width technique for the KMeans algorithm is utilized in different ways to obtain optimal numbers of clusters. We discuss application of the emission clustering to visualizations of the computational volume, understanding its evolutionary trends and behavior patterns, and inversion (reconstruction) of physical properties of the solar atmosphere from synthesizes emission data.

Sadykov, Viacheslav↗

DOE OSTI2020

Big Data and AI at DoE's Legacy Sites - 20546

More than 30 years have passed since DOE started the decommissioning of nuclear weapon complexes and the clean-up of soil and groundwater. All the sites have been collecting and archiving soil and groundwater monitoring datasets; particularly contaminant concentration time-series. These datasets provide unparalleled opportunities to understand the system behavior (including more fundamental hydrological and geochemical processes, the response to various perturbations, the long-term trend and environmental decay rate towards the regulatory limit). This understanding is critical for providing multiple lines of evidences that can support site closure. In this study, we explore the machine learning (ML) and artificial intelligence (AI) applications to the long-term soil and groundwater management at DoE's legacy sites. ML can improve our understanding of the subsurface systems, which is critical for long-term monitoring and management of the sites, while AI can automate or support some of decision-making processes (e.g., anomaly detection, monitoring well placements). The particular focuses are to develop general algorithms to: (1) to identify distinct spatiotemporal patterns and to identify several groups that have similar temporal behaviors, using unsupervised clustering methods, (2) identify the different temporal scales of hydrological responses to climate perturbations by time-series analysis, and (3) reduce the number of monitoring wells by identifying the minimum sufficient number of wells to capture the heterogeneity of the groundwater contaminant plume and concentration distribution, using the Gaussian Process model. We demonstrate our methodology at the Savannah River Site F-Area. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

NASA NTRS2010

Mimas: Preliminary Evidence For Amorphous Water Ice from VIMS

We have conducted a statistical clustering analysis (1,2) on a mosaic of VIMS data cubes obtained on February 13, 2010, for Saturn s satellite Mimas. Seven VIMS cubes were geometrically projected and re-sampled to a common spatial resolution. The clustering technique consists of a partitioning algorithm coupled to a criterion that prevents sub-optimal solutions and tests for the influence of random noise in the measurements. The clustering technique is agnostic about the meaning of the clusters, and scientific interpretation requires their a posteriori evaluation. The preliminary results yielded five clusters, demonstrating that spectral variability across Mimas surface is statistically significant. The ratios of the means calculated for each of the clusters show structure within the 1.6- micron water ice band, as well as the shape and the central wavelength of the strong ice band at 2 micron, that map spatially in patterns apparently related to the topography of Mimas, in particular certain regions in and around Herschel crater. The mean spectra of the five clusters, show similarities with laboratory spectra of amorphous and crystalline H2O ice (3) that are suggestive of the presence of an amorphous ice component in certain regions of Mimas, notably on the central peak of Herschel, on the crater floor, and in faults surrounding the crater. This may represent a mixture of both ice phases, or perhaps a layer of amorphous ice on a base of crystalline ice. Another possible occurrence of amorphous ice appears southwest of Herschel, close to the south pole.

Cruikshank, Dale P.↗

DOE OSTI2026

Optimal invariant sets for atomistic machine learning

The representation of atomic configurations for machine learning models has led to numerous sets of descriptors. However, many descriptor sets are incomplete and/or functionally dependent. Incomplete sets cannot faithfully represent atomic environments. Yet complete constructions often suffer from a high degree of functional dependence, where some descriptors are functions of others. These redundant descriptors do not improve discrimination between atomic environments. We employ pattern recognition techniques to remove dependent descriptors to produce the smallest possible set that satisfies completeness. We apply this in two ways: First, we refine an existing description, the atomic cluster expansion. Second, we augment an incomplete construction, yielding a new message-passing neural network architecture that can recognize up to 5-body patterns. This architecture shows strong accuracy on state-of-the-art benchmarks while retaining low computational cost. Our results demonstrate the utility of this strategy to optimize descriptor sets across a range of descriptors and application datasets.

97 MATHEMATICS AND COMPUTING↗

NASA NTRS1994

Unsupervised texture image segmentation by improved neural network ART2

We here propose a segmentation algorithm of texture image for a computer vision system on a space robot. An improved adaptive resonance theory (ART2) for analog input patterns is adapted to classify the image based on a set of texture image features extracted by a fast spatial gray level dependence method (SGLDM). The nonlinear thresholding functions in input layer of the neural network have been constructed by two parts: firstly, to reduce the effects of image noises on the features, a set of sigmoid functions is chosen depending on the types of the feature; secondly, to enhance the contrast of the features, we adopt fuzzy mapping functions. The cluster number in output layer can be increased by an autogrowing mechanism constantly when a new pattern happens. Experimental results and original or segmented pictures are shown, including the comparison between this approach and K-means algorithm. The system written in C language is performed on a SUN-4/330 sparc-station with an image board IT-150 and a CCD camera.

Wang, Zhiling↗

DOE OSTI2026

Differences in cluster and internal wake effects from mesoscale and large-eddy simulations off the US East Coast

Mesoscale simulations are increasingly used to estimate wake effects within and between large wind farms, despite limited validation for large-scale wake effects. This study evaluates the capabilities and limitations of mesoscale simulations in capturing wake-induced impacts on wind turbine power production through a direct comparison with large-domain large-eddy simulations (LESs) for three planned offshore wind farms under realistic atmospheric conditions and a range of atmospheric stabilities. We assess mesoscale performance in replicating wake characteristics behind single and multiple turbine clusters and quantify the resulting variability in mean turbine power. Results show that mesoscale Weather Research and Forecasting simulations with the Fitch wind farm parameterization capture key features of the velocity deficit downstream of both single and multiple wind farms, with mean root-mean-square errors near 5 % and good agreement with stability-driven wake behavior. However, in these simulations, the mesoscale Fitch parameterization underestimates power losses from internal wake effects, particularly when turbines align with the prevailing wind direction or under stable stratification. In these conditions, individual wakes persist and dominate downstream power deficits. The coarse resolution of the mesoscale simulations limits their ability to resolve individual wind turbine wakes that drive power fluctuations within wind farms. Nonetheless, mesoscale simulations can yield accurate estimates of combined wake losses from internal and cluster effects across some wind direction sectors, where errors in wake representation may cancel each other out. These findings underscore the strengths of mesoscale simulations for capturing broader wake patterns while highlighting their limitations for modeling turbine-level power losses. Future work should explore hybrid modeling approaches to capture both long-range cluster wake propagation and localized internal wake dynamics.

17 WIND ENERGY↗

NASA NTRS1990

Down-to-earth studies of carbon clusters

Recent advances in supersonic beam experiments with laser-vaporization sources of clusters have provided some interesting new insights into the nature of the small clusters of carbon, and the processes through which carbon condenses. One cluster in particular, C(sub 60), appears to play a central role. It is argued that this cluster takes the shape of a soccerball: a hollow sphere composed of a shell of 60 carbon atoms connected by a lattice of hexagonal and pentagonal rings, in a pattern of overall icosahedral symmetry. Although C(sub 60) appears to be uniquely stable due to its perfect symmetry, all other even-numbered carbon clusters in the 32 to 100+ atom size range seem to favor similar closed spheroidal forms. These species are interpreted as relatively unreactive side products in condensation reactions of carbon vapor involving spiraling graphitic sheets. The prevalence of C(sub 60) in laser-vaporized carbon vapors and sooting flames suggests that it may be formed readily whenever carbon condenses. Such ready formation and extraordinary stability may have substantial astrophysical implications.

Smalley, R. E.↗

DOE OSTI2025

Root size and soil physicochemical properties drive microscale spatial patterns of Fe and As retention in the rice rhizosphere

Background and Aims: Radial oxygen loss from rice roots in flooded soils oxidizes and precipitates dissolved Fe(II), Mn(II), and As(III) into mixed Fe(III), Mn(III/IV), and As(V) as root plaque and in the rhizosphere soil. It is unknown how different soils and root sizes impact the spatial extent of Fe and As retention outside the root. Methods: We imaged cross-sections of 90 roots from 6 different soils using synchrotron μXRF imaging followed by k-means clustering and elliptical averaging to distinguish bulk soil, rhizosphere, plaque, and roots based on As and Fe patterns. Results: We found preferential As retention in the plaque and rhizospheres of most roots except small (< 0.45 mm) roots in silty soils with low P or high As. In contrast, clayey soils had similar As-Fe correlations across plaque, rhizosphere, and bulk soil. Large (> 0.45 mm) roots often had no oxidized rhizosphere region. We obtained an extensive dataset of 256 As and 155 Mn synchrotron μXANES measurements, which revealed that rhizosphere and plaque As was mainly inorganic As(V) and As(III), and Mn oxidation state varied between soils but not between belowground locations. Conclusion: Small roots in coarse-textured soils were less likely to have As retention in the plaque or rhizosphere compared to large roots and fine-textured soils. Furthermore, the unique and extensive data in this study provides new insight into soil and root size impacts on As retention in the rhizosphere. It is essential to investigate a representative number of samples to draw conclusions from XRF imaging.

36 MATERIALS SCIENCE↗

DOE OSTI2022

Shifting temporal dynamics of human mobility in the United States

In this paper we analyze the average hourly temporal dynamics of human mobility in the United States from 2019 to 2020. We discuss how large decreases in human mobility nonuniformly effect the daily temporal dynamics of aggregate human behavior. The data used are weekly activity patterns for POIs from 2019 to 2020 in the United States, provided by SafeGraph and made openly available to academic and research institutions. We use clustering methods to create metrics describing how human activity changes throughout the day/week at the county and national levels. In response to significant mobility reductions starting March 2020, daily temporal patterns of human activity changed nonuniformly. Morning activity started later, and evening activity started earlier in 2020 compared to 2019, and temporal behavioral patterns on weekdays began to look more similar to weekends. The changes in daily temporal behavior persisted throughout the year even as total mobility levels recovered. The results provide insights on the changes in human behavior in response covid-19 policies and illustrate influences on social systems, health, and transportation networks.

99 GENERAL AND MISCELLANEOUS↗