Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “partial correlation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 271 records · Page 15
All sourcesNASA NTRSDOE OSTI
DOE OSTI2023

A flexible polymer-based luminescent ink for combined thermographic phosphors and digital image correlation (TP+DIC)

Recent work on the development of integrated thermographic phosphors and digital image correlation (TP+DIC) for combined thermal–mechanical measurements has revealed the need for a flexible, stretchable phosphor coating for metal surfaces. Herein, we coat stainless steel substrates with a polymer-based phosphor ink in a DIC speckle pattern and demonstrate that the ink remains well bonded under substrate deformation. In contrast, a binderless phosphor DIC coating produced via aerosol deposition (AD) partially debonded from the substrate. DIC calculations reveal that the strain on the ink coating matches the strain on the substrate within 4% error at the highest substrate loads (0.05 mm/mm applied substrate strain), while the strain on the AD coating remains near 0 mm/mm as the substrate deforms. Spectrally resolved emission from the phosphor is measured through the transparent binder throughout testing, and the ratio method is used to infer temperature with an uncertainty of 1.7 °C. In conclusion, this phosphor ink coating will allow for accurate, non-contact strain and temperature measurements of a deforming surface.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Unique contributions of chlorophyll and nitrogen to predict crop photosynthetic capacity from leaf spectroscopy

The photosynthetic capacity or the CO 2 -saturated photosynthetic rate (Vmax), chlorophyll, and nitrogen are closely linked leaf traits that determine C 4 crop photosynthesis and yield. Accurate, timely, rapid, and non-destructive approaches to predict leaf photosynthetic traits from hyperspectral reflectance are urgently needed for high-throughput crop monitoring to ensure food and bioenergy security. Therefore, this study thoroughly evaluated the state-of-the-art physically based radiative transfer models (RTMs), data-driven partial least squares regression (PLSR), and generalized PLSR (gPLSR) models to estimate leaf traits from leaf-clip hyperspectral reflectance, which was collected from maize (Zea mays L.) bioenergy plots with diverse genotypes, growth stages, treatments with nitrogen fertilizers, and ozone stresses in three growing seasons. The results show that leaf RTMs considering bidirectional effects can give accurate estimates of chlorophyll content (Pearson correlation r=0.95), while gPLSR enabled retrieval of leaf nitrogen concentration (r=0.85). Using PLSR with field measurements for training, the cross-validation indicates that V max can be well predicted from spectra (r=0.81). Here, the integration of chlorophyll content (strongly related to visible spectra) and nitrogen concentration (linked to shortwave infrared signals) can provide better predictions of V max (r=0.71) than only using either chlorophyll or nitrogen individually. This study highlights that leaf chlorophyll content and nitrogen concentration have key and unique contributions to V max prediction.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2022

Deep Electric Field Predictions by Drift-Reduced Braginskii Theory with Plasma-Neutral Interactions Based on Experimental Images of Boundary Turbulence

We present 2-dimensional turbulent electric field calculations via physics-informed deep learning consistent with (i) drift-reduced Braginskii theory under the framework of an axisymmetric fusion plasma with purely toroidal field and (ii) experimental estimates of the fluctuating electron density and temperature on open field lines obtained from analysis of gas puff imaging of a discharge on the Alcator C-Mod tokamak. The inclusion of effects from the locally puffed atomic helium on particle and energy sources within the reduced plasma turbulence model are found to strengthen correlations between the electric field and electron pressure. The neutrals are also directly associated with broadening the distribution of turbulent field amplitudes and increasing ${\bf E \times B}$ shearing rates. As a result, this demonstrates a novel approach in plasma experiments by solving for nonlinear dynamics consistent with partial differential equations and data without encoding explicit boundary nor initial conditions.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2024

Serum bile acid and unsaturated fatty acid profiles of non-alcoholic fatty liver disease in type 2 diabetic patients

The understanding of bile acid (BA) and unsaturated fatty acid (UFA) profiles, as well as their dysregulation, remains elusive in individuals with type 2 diabetes mellitus (T2DM) coexisting with non-alcoholic fatty liver disease (NAFLD). Investigating these metabolites could offer valuable insights into the pathophy-siology of NAFLD in T2DM. Our aim is to identify potential metabolite biomarkers capable of distinguishing between NAFLD and T2DM. A training model was developed involving 399 participants, comprising 113 healthy controls (HCs), 134 individuals with T2DM without NAFLD, and 152 individuals with T2DM and NAFLD. External validation encompassed 172 participants. NAFLD patients were divided based on liver fibrosis scores. The analytical approach employed univariate testing, orthogonal partial least squares-discriminant analysis, logistic regression, receiver operating characteristic curve analysis, and decision curve analysis to pinpoint and assess the diagnostic value of serum biomarkers. Compared to HCs, both T2DM and NAFLD groups exhibited diminished levels of specific BAs. In UFAs, particular acids exhibited a positive correlation with NAFLD risk in T2DM, while the ω-6:ω-3 UFA ratio demonstrated a negative correlation. Levels of α-linolenic acid and γ-linolenic acid were linked to significant liver fibrosis in NAFLD. The validation cohort substantiated the predictive efficacy of these biomarkers for assessing NAFLD risk in T2DM patients. This study underscores the connection between altered BA and UFA profiles and the presence of NAFLD in individuals with T2DM, proposing their potential as biomarkers in the pathogenesis of NAFLD.

60 APPLIED LIFE SCIENCES↗
DOE OSTI2022

Can reanalysis products outperform mesoscale numerical weather prediction models in modeling the wind resource in simple terrain?

Mesoscale numerical weather prediction (NWP) models are generally considered more accurate than reanalysis products in characterizing the wind resource at heights of interest for wind energy, given their finer spatial resolution and more comprehensive physics. However, advancements in the latest ERA-5 reanalysis product motivate an assessment on whether ERA-5 can model wind speeds as well as a state-of-the-art NWP model – the Weather Research and Forecasting (WRF) Model. We consider this research question for both simple terrain and offshore applications. Specifically, we compare wind profiles from ERA-5 and the preliminary WRF runs of the Wind Integration National Dataset (WIND) Toolkit Long-term Ensemble Dataset (WTK-LED) to those observed by lidars at a site in Oklahoma, United States, and in a United States Atlantic offshore wind energy area. We find that ERA-5 shows a significant negative bias (~-1ms-1) at both locations, with a larger bias at the land-based site. WTK-LED-predicted wind speed profiles show a limited negative bias (~-0.5ms-1) offshore and a slight positive bias (~+0.5ms-1) at the land-based site. On the other hand, we find that ERA-5 outperforms WTK-LED in terms of the centered root-mean-square error (cRMSE) and correlation coefficient, for both the land-based and offshore cases, in all atmospheric stability conditions. We find that WTK-LED's higher cRMSE is caused by its tendency to overpredict the amplitude of the wind speed diurnal cycle. At the land-based site, this is partially caused by wind plant wake effects not being accurately captured by WTK-LED.

17 WIND ENERGY↗
DOE OSTI2023

An in-silico NMR laboratory for nuclear magnetic shieldings computed via finite fields: Exploring nucleus-specific renormalizations of MP2 and MP3

Here we developed and implemented a method-independent, fully numerical, finite difference approach to calculating nuclear magnetic resonance shieldings, using gauge-including atomic orbitals. The resulting capability can be used to explore non-standard methods, given only the energy as a function of finite-applied magnetic fields and nuclear spins. For example, standard second-order Møller-Plesset theory (MP2) has well-known efficacy for 1H and 13C shieldings and known limitations for other nuclei such as 15N and 17O. It is, therefore, interesting to seek methods that offer good accuracy for 15N and 17O shieldings without greatly increased compute costs, as well as exploring whether such methods can further improve 1H and 13C shieldings. Using a small molecule test set of 28 species, we assessed two alternatives: κ regularized MP2 (κ-MP2), which provides energy-dependent damping of large amplitudes, and MP2.X, which includes a variable fraction, X, of third-order correlation (MP3). The aug-cc-pVTZ basis was used, and coupled cluster with singles and doubles and perturbative triples [CCSD(T)] results were taken as reference values. Our κ-MP2 results reveal significant improvements over MP2 for 13C and 15N, with the optimal κ value being element-specific. κ-MP2 with κ = 2 offers a 30% rms error reduction over MP2. For 15N, κ-MP2 with κ = 1.1 provides a 90% error reduction vs MP2 and a 60% error reduction vs CCSD. On the other hand, MP2.X with a scaling factor of 0.6 outperformed CCSD for all heavy nuclei. These results can be understood as providing renormalization of doubles amplitudes to partially account for neglected triple and higher substitutions and offer promising opportunities for future applications.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2019

Short-term traffic state prediction from latent structures: Accuracy vs. efficiency

Recently, deep learning models have shown promising performances in many research areas, including traffic states prediction, due to their ability to model complex nonlinear relationships. However, deep learning models also have drawbacks that make them less preferable for certain short-term traffic prediction applications. For example, they require a large amount of data for model training, which is also computationally expensive. Moreover, deep learning models lack interpretability of the results. This paper develops a short-term traffic states forecasting algorithm based on partial least square (PLS) to help enhance real-time decision-making and build better insights into traffic data. The proposed model is capable of predicting short-term traffic states accurately and efficiently by capturing dominant spatiotemporal features and day-to-day variations from collinear and correlated traffic data. Three case studies are developed to demonstrate the proposed model in short-term traffic prediction applications.

99 GENERAL AND MISCELLANEOUS↗
DOE OSTI2025

Methanogenesis and Acetogenesis in Hydrogenotrophy with Carbonate Minerals: Dependence on Mineral Surface Area, Biofilm Growth, and Microbial Community

The production, storage, and use of hydrogen are anticipated to grow substantially to achieve energy and climate goals. Consequently, microbial communities in many terrestrial and subsurface Earth environments could be exposed to elevated hydrogen concentrations. Hydrogen stimulates metabolic processes that reduce aqueous chemical species, such as bicarbonate or sulfate, that can exchange with solid mineral phases, but the controls on microbial hydrogenotrophy with mineral sources of electron acceptors are not fully understood. Herein, we applied laboratory experiments and biogeochemical modeling to study the response of a natural microbial community to an elevated partial pressure of hydrogen in the presence of carbonate minerals of varying composition, solubility, and size. Experimental incubations and simulation results showed that hydrogen consumption by microbial communities was initially dominated by sulfate reduction and, subsequently, transitioned to acetogenesis and methanogenesis. The rates of acetogenesis and methanogenesis were not correlated with the solubility of carbonate minerals. Instead, we observed strong linear correlations between the rates and surface area of carbonate minerals. Methane and acetate production slowed down in all incubations after about 2 weeks of incubation, although biogeochemical modeling predicted that the metabolic processes were not thermodynamically limited. Electron microscopy and infrared spectroscopy showed that biofilms with diverse microorganisms grew on the carbonates during this period. The methane δ13C value significantly increased, consistent with slower growth at elevated pH. This work highlights that microbial communities form biofilm on carbonate mineral surfaces as a response to hydrogen and that biofilm formation could pose a strong kinetic limitation to hydrogenotrophic metabolism utilizing carbonate minerals.

Acetobacterium↗
DOE OSTI2020

NMR studies of the ground states of Ni 50-x Co x Mn 35 In 15 (x=1, 2.5) and Ni 45 Co 5 Mn 37 In 13 Heusler alloys

Three temperature-induced phase transitions at T=T 1 , T M /T A , and T C , related to the ferromagnetic order of the martensitic phase (FMMP), martensitic (structural) transitions (MT), and the ferromagnetic order of the austenitic phase (FMAP), respectively, have been observed in the off-stoichiometric Heusler alloys, Ni 50-x Co x Mn 35 In 15 (x=1, 2.5) and Ni 45 Co 5 Mn 37 In 13 . In this work, the phase transitions temperatures are found to be depended on alloy composition. A kinetic arrest of the AP was observed for Ni 47.5 Co 2.5 Mn 35 In 15 in the magnetization measurements during field-cooling cycle (FCC) at 50 kOe. Depending upon the cooling protocols, ZFC and FCC (at H = 50 kOe), two different ground states of the alloys can be found in Ni 47.5 Co 2.5 Mn 35 In 15 and Ni 45 Co 5 Mn 37 In 13 alloys. The ground states (T=4.2 K and external field H=0) of the alloys was found to be characterized by three main line: two, partially overlapping, at higher frequencies (300-450 MHz), most likely corresponding of manganese resonance lines and one at lower frequency at about 200 MHz. A significant shift in the spectrum of Ni 45 Co 5 Mn 37 In 13 by about 100 MHz to higher frequencies was observed. The correlation of magnetizations obtained from magnetic moment and NMR studies is discussed.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Magnon damping and mode softening in quantum double-exchange ferromagnets

We present a comprehensive analysis of the magnetic excitations and electronic properties of fully quantum double-exchange ferromagnets, i.e. systems where ferromagnetic (FM) ordering emerges from the competition between spin, charge, and orbital degrees of freedom, but without the canonical approximation of using classical localized spins. Specifically, we investigate spin excitations within the Kondo lattice-like model, as well as a two-orbital Hubbard Hamiltonian in proximity to the orbital-selective Mott phase. Computational analysis of the magnon dispersion, damping, and spectral weight within these models reveals unexpected phenomena, such as magnon mode softening and the anomalous decoherence of magnetic excitations as observed in earlier experimental efforts, but explained here without the use of the phononic degrees of freedom. We show that these effects are intrinsically linked to incoherent spectral features near the Fermi level, which arise due to the quantum nature of the local (on-site) triplets. This incoherent spectrum leads to a Stoner-like continuum on which spin excitations scatter, governing magnon lifetime and strongly influencing the dynamical spin structure factor. Our study explores the transition from coherent to incoherent magnon spectra by varying the electron density. Furthermore, we demonstrate that the magnitude of the localized spin mitigates decoherence by suppressing the incoherent spectral contributions near the Fermi level. We also discuss the effective J 1 –J 2 spin Hamiltonian, which can accurately describe the large doping region characterized by the magnon-mode softening. Finally, we show that this behavior is also present in multiorbital models with partially filled orbitals, namely, in systems without localized spin moments, provided that the model is in a strong coupling regime. Our results potentially have far-reaching implications for understanding FM ordering in various multi-band systems. These findings establish a previously unknown direct connection between the electronic correlations of those materials and spin excitations.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2023

Thermo-Catalytic Decomposition Comparisons: Carbon Catalyst Structure, Hydrocarbon Feed and Regeneration

Thermo-catalytic decomposition (TCD) activity and stability depend upon the initial carbon catalyst structure. However, further transitions in the carbon structure depend on the carbon material (structure and composition) originating from the TCD process. In this article, reaction data are presented that illustrates the time-dependent TCD activity as TCD-formed carbon contributes and then dominates conversion. A variety of initial carbon catalysts are compared, including sugar char, a conductive carbon black (AkzoNobel Ketjenblack), a rubber-grade carbon black (Cabot R250), and its graphitized analogue as formed and partially oxidized. Regeneration of carbon catalysts by partial oxidation is evaluated using nascent carbon black as a model, coupled with subsequent comparative TCD performance relative to the nascent, non-oxidized carbon black. Activation energies for TCD with nascent and oxidized carbons are evaluated by a leading-edge analysis method applied to TCD. Given the correlation between nanostructure and active sites, two additional carbons, engine soots, are evaluated for regeneration and dependence upon nanostructure. Active sites are quantified by oxygen chemisorption, followed by X-ray photoelectron spectroscopy (XPS). The structure of carbon catalysts is assessed pre- and post-TCD by high-resolution transmission electron microscopy (HRTEM). Last, energy dispersive X-ray analysis mapping (EDS) is carried out for its potential to visualize oxygen chemisorption.

03 NATURAL GAS↗
DOE OSTI2025

Unraveling Anion-Specific Inhibition and Structural Modulation of Gibbsite Crystallization: Implications for Aluminum Mobility in Natural and Engineered Systems

Gibbsite (α-Al(OH) 3 , sometimes designated as γ-Al(OH) 3 ) plays a crucial role in the chemistry of aluminum in the environment and industry, yet its crystallization behavior under multianionic conditions is not well understood. Here, in this study, we investigate how six common anions─fluoride (F – ), chloride (Cl – ), bromide (Br – ), nitrate (NO 3 – ), sulfate (SO 4 2– ), and phosphate (PO 4 3– )─influence the mineralization, structure, and morphology of gibbsite at room temperature. The results show that PO 4 3– , SO 4 2– , and F – strongly inhibit gibbsite formation, stabilizing amorphous or alternative crystalline phases such as nordstrandite and cryolite. On the contrary, Cl – , Br – , and NO 3 – allow partial to complete crystallization of gibbsite without significant morphological changes. Solid-state 27 Al magic angle spinning nuclear magnetic resonance provides crucial insight into aluminum coordination environments in both crystalline and amorphous phases, distinguishing between octahedral, pentahedral, and tetrahedral Al species. The density functional theory calculations reveal a direct correlation between the Al–X bond strength and the inhibition of crystallization, following the order: PO 4 3– > SO 4 2– > F – > NO 3 – > Cl – > Br – . These findings offer molecular-scale insights into anion-specific effects on aluminum hydroxide nucleation and transformation, improving the understanding of gibbsite formation and aluminum cycling in soils, phosphate retention, contaminant immobilization, and waste treatment strategies in nuclear and industrial settings. These insights can also guide the controlled synthesis of aluminum hydroxide materials with tailored crystallinity and morphology via liquid-assisted methods.

Anions effect↗
DOE OSTI2023

Quantifying Site Effects and Their Influence on Earthquake Source Parameter Estimations Using a Dense Array in Oklahoma

We investigate the effects of site response on source parameter estimates using earthquakes recorded by the LArge-n Seismic Survey in Oklahoma (LASSO). While it is well known that near-surface unconsolidated sediments can cause an apparent breakdown of earthquake self-similarity, the influence of laterally varying site conditions remains unclear. We analyze site conditions across the 1825-station array on a river plain within an area of 40 km by 23 km using vertical ground motions from 14 regional earthquakes. While the source radiation pattern controls P-wave ground motions below 8 Hz, the surface geology correlates with P-wave ground motions above 8 Hz and S-wave ground motions at 2–21 Hz. Stations installed in alluvial sediments have vertical ground motions that can exceed three times the array median. We use the variation of ground motion of regional earthquakes across the array as a proxy for site effects. The corner frequencies and stress drops of local earthquakes ( M L = 0.01–3) estimated using a standard single-spectra approach show negative correlations with the site-effect proxy, while the seismic moments show positive correlations. In contrast, the spectral-ratio approach effectively shows no correlation. The overall bias is small as expected for this relatively homogeneous structure; accurate estimation of site-related biases requires at least 30 stations. Correcting for site-related biases reduces the standard deviations of the source parameters by less than 13% of the total variations. Remaining variations are partially associated with source directivity and model misfits— as small earthquakes can have complex ruptures.

58 GEOSCIENCES↗
DOE OSTI2024

Hopping frustration-induced flat band and strange metallicity in a kagome metal

The introduction of localized electronic states into a metal can alter its physical properties, for example enabling exotic metal physics including heavy fermion and strange metal behaviour. A common source of localized states in such systems are partially filled 4f and 5f shells because of the inherently compact nature of those orbitals. The interaction of electrons in these orbitals with the conduction sea is well described by the Kondo framework. However, there have also been observations of Kondo-like behaviour in 3d transition metal oxides and in 4d- and 5d-containing van der Waals heterostructures. This calls for a broader consideration of the physical requirements for Kondo systems. Here we show transport and thermodynamic hallmarks of heavy fermion and strange metal behaviour that arise in the kagome metal Ni3In, wherein the source of localized states is destructive interference-induced band flattening of partially filled Ni 3d states. With magnetic field and pressure tuning, here we also find evidence that the system is proximate to quantum criticality, extending the analogy to f-electron Kondo lattices. These observations highlight the role of hopping frustration in metallic systems as a potential source for strong correlations. Additionally, this suggests a lattice-driven approach to realizing correlated metals with non-trivial band topology.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Synthesis of cobalt grown from Co-S eutectic in high magnetic fields

Samples of Co were grown directly in the ferromagnetic state under equilibrium conditions using a cobalt sulfide flux. Magnetic fields up to 9 T were applied during growth, and isolated Co products exhibit progressively elongated morphologies, from cubes to rectangular rods to needle-like tendrils with poorly-defined facets. The degree of elongation of the major axis was found to correlate with magnetic field direction, strength, and gradient. Two-dimensional X-ray diffraction data indicate some level of polycrystalline-like samples, and quantitative analyses (Le Bail and Rietveld) of the one-dimensional data confirm the presence of hcp and fcc phases. The magnetic responses indicate a partial alignment of the magnetic easy-axis of the hcp phase along the magnetic field present during growth.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Anomalous temperature dependence of the experimental x-ray structure factor of supercooled water

The structural changes of water upon deep supercooling were studied through wide-angle x-ray scattering at SwissFEL. The experimental setup had a momentum transfer range of 4.5 Å-1, which covered the principal doublet of the x-ray structure factor of water. The oxygen–oxygen structure factor was obtained for temperatures down to 228.5 ± 0.6 K. Similar to previous studies, the second diffraction peak increased strongly in amplitude as the structural change accelerated toward a local tetrahedral structure upon deep supercooling. We also observed an anomalous trend for the second peak position of the oxygen–oxygen structure factor (q 2 ). We found that q 2 exhibits an unprecedented positive partial derivative with respect to temperature for temperatures below 236 K. Based on Fourier inversion of our experimental data combined with reference data, we propose that the anomalous q 2 shift originates from that a repeat spacing in the tetrahedral network, associated with all peaks in the oxygen–oxygen pair-correlation function, gives rise to a less dense local ordering that resembles that of low-density amorphous ice. The findings are consistent with that liquid water consists of a pentamer-based hydrogen-bonded network with low density upon deep supercooling.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Nickel Enhances InPd-Catalyzed Nitrate Reduction Activity and N 2 Selectivity

Palladium–indium (PdIn) is a well-established bimetallic composition for reductively degrading nitrate anions, one of the most ubiquitous contaminants in the groundwater. However, the scarcity and the variable price of these rare-earth and platinum group critical metals may hinder their use for water treatment. Nickel (Ni), a nonprecious metal in the same element group as Pd, could partially replace and lower Pd usage if the resulting trimetallic composition is sufficiently catalytically active. Herein, we report the synthesis and nitrate reduction catalysis of activated carbon-supported “In-on-Pd-on-Ni” catalysts (InPdNi/AC). While bimetallic InPd/AC (0.05 wt % In, 1.3 wt % Pd) was expectedly active, trimetallic InPdNi/AC containing the same In amount, much less Pd (0.1 wt %), and 1 wt % Ni was >17 more active (k cat ≈ 20 vs 349 L min –1 g surface metal –1 ). X-ray photoelectron spectroscopy (XPS) and density functional theory (DFT) calculations showed that Pd gained electron density from Ni, correlating to the increased nitrate reduction activity. Ammonium byproduct selectivity for InPdNi/AC (18% at 50% nitrate conversion) was lower compared to that of InPd/AC (48%), suggestive of the higher surface coverage of NO or its greater reactivity with NO 2 – , which led to more N 2 . Accounting for the catalyst precursor, manufacturing costs, and spent metal recovery, we calculated that Ni incorporation lowered the net catalyst cost significantly (from $\$$1028/kg to $\$$170/kg). The trimetallic composition lowered, by ∼26 times, the catalyst cost of a stirred tank reactor sized to the same treatment capacity as that for the bimetallic case. In conclusion, the results demonstrate that the partial replacement of the precious metal with an earth-abundant one leads to a higher efficiency and lower cost denitrification catalyst, via a material strategy that should be beneficial for other clean-water catalytic systems.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

Disentangling interlayer confinement and pore surface adsorption in functionalized smectites for tunable ethylene gas capture

Smectite-based adsorbents are increasingly being studied as sustainable packaging materials for scavenging ethylene, a plant hormone that accelerates fruit ripening. However, the mechanisms governing their uptake and retention remain poorly understood. Here, to tackle this question we systematically investigate ethylene gas-solid interactions in pristine, acid-activated, and choline-functionalized montmorillonites using a complementary combination of structural, gravimetric, and spectroscopic techniques, including inelastic neutron scattering. We experimentally distinguish ethylene populations associated with interlayer confinement, mesopore, and external surface adsorption. We show that chemical functionalization distinctly controls adsorption pathways: acid activation enhances total uptake by generating mesoporous adsorption sites and promoting partial interlayer intercalation, yielding capacities comparable to those of leading smectite-based adsorbents, while choline functionalization promotes preferential confinement and stabilization of guest molecules within the interlayer galleries. Advanced spectroscopic analysis provides molecular-level insight into confinement environments and interaction strengths. We also establish clear structure-property relationships by correlating uptake values derived from independent techniques, linking chemical modification, accessible adsorption domains, and retention behavior. These findings provide general design principles for tuning gas-solid interactions in functionalized layered silicates and highlight their potential as adaptable platforms for sustainable ethylene gas capture and selective adsorption technologies.

Ethylene adsorption mechanism↗