Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “oxygen electrode”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 271 records · Page 15
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

Phase segregation of a composite air electrode unlocks the high performance of reversible protonic ceramic electrochemical cells

One breakthrough in developing highly efficient air electrodes for reversible protonic ceramic electrochemical cells (R-PCECs) is optimizing the sluggish oxygen reduction and water oxidation reactions. Here, we present a novel composite material with a nominal formula of high-entropy Ce 0.2 Ba 0.2 Sr 0.2 La 0.2 Ca 0.2 CoO 3–δ (CBSLCC) that spontaneously self-assembles to three-phase electrocatalysts composed of deficient Ce 0.2–y Ba 0.2 Sr 0.2–x La 0.2–x Ca 0.2 CoO 3–δ (CD-CBSLCC), CeO 2 , and La 0.5 Sr 0.5 CoO 3–δ (LSC). Mechanistic studies corroborate that oxygen reduction may occur on entire air electrode surfaces, followed by water formation preferentially at or near CD-CBSLCC. The CeO 2 phase could provide or consume protons to facilitate the oxygen evolution/reduction kinetics in R-PCECs. The developed electrodes demonstrate a record-high electrochemical performance in dual modes of fuel cells and electrolysis cells, delivering a peak power density of 1.66 W cm –2 at 600 °C and a current density of –1.76 A cm –2 at 1.3 V and 600 °C. Finally, excellent operational stabilities of the fuel cell (200 h at 600 °C), electrolysis cell (200 h at 600 °C), and reversible cycling (548 h at 550 °C) provide a promising and reliable step towards realizing the commercialization of R-PCECs.

30 DIRECT ENERGY CONVERSION↗
DOE OSTI2025

Morphological Degradation of Oxygen Evolution Reaction-Electrocatalyzing Nickel Selenides at Industrially Relevant Current Densities

We investigated electrodeposited nanoparticulate nickel selenide (pre)catalysts that transform into nickel oxides/ oxyhydroxides under oxygen evolution reaction conditions in alkaline solutions. Previous studies of this transformation were conducted at lower current densities than those of industrial relevance (≥1 A cm −2 ). We used ultramicroelectrodes (UMEs) to achieve such current densities, benefiting from their small size, ensuring low absolute currents and low ohmic drop but high current densities. Morphological degradation of the catalyst material was only observed at current densities exceeding 1 A cm −2 but not for smaller ones. Using X-ray absorption, Xray photoemission spectroscopy, and X-ray diffraction, we confirmed that the degradation was accompanied by the literature-known transformation of nanoparticulate Ni 3 Se 2 (bulk)/NiSe (surface) into nickel oxyhydroxide. The transformation of the precatalyst goes along with a significant improvement in the charge transfer kinetics observed by decreasing Tafel slopes with ongoing experimental time extracted from cyclic voltammetry (CV) experiments and electrochemical impedance spectroscopy (EIS) in the high-frequency range. However, these kinetic improvements are accompanied by limitations in mass transport concluded from decreasing current responses at high overpotentials in CVs and increasing impedance in the low-frequency range of the EIS spectra after extended CV cycling. These mass transport limitations originated from morphological degradations at the UME exceeding 1 A cm −2 which we proved by applying identical location scanning electron microscopy. This has not been reported in studies that have been limited to lower current densities before. Our findings showcase how UMEs can be used to study (pre)catalysts (herein nickel selenides) under current densities of industrial relevance in the absence of ohmic drop-related ambiguities, combined with in-depth materials characterization studies, e.g., identical location microscopy and advanced spectroscopic methods. This approach enables direct evaluation and comparison of catalyst materials and thus demonstrates how to overcome long-standing limitations of electrocatalyst design and testing.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Enhanced stability of silicon for photoelectrochemical water oxidation through self-healing enabled by an alkaline protective electrolyte

Alkaline electrolytes impede the corrosion of Si photoanodes under positive potentials and/or illumination, due to the formation of a SiO x layer that etches 2–3 orders of magnitude more slowly than Si. Hence during water oxidation under illumination, pinholes in protection layers on Si photoanodes result in the local formation of a protective, stabilizing passive oxide on the Si surface. However, operation under natural diurnal insolation cycles additionally requires protection strategies that minimize the dark corrosive etching rate of Si at pinholes. We show herein that addition of [Fe(CN) 6 ] 3- to 1.0 M KOH(aq) results in a self-healing process that extends the lifetime to >280 h of an np + -Si(100) photoanode patterned with an array of Ni catalyst islands operated under simulated day/night cycles. The self-healing [Fe(CN) 6 ] 3- additive caused the exposed Si(100) surface to etch >180 times slower than the Si etch rate in 1.0 M KOH(aq) alone. No appreciable difference in etch rate or facet preference was observed between Si(100) and Si(111) surfaces in 1.0 M KOH(aq) with [Fe(CN) 6 ] 3- , indicating that the surface conformally oxidized before Si dissolved. The presence of [Fe(CN) 6 ] 3- minimally impacted the faradaic efficiency or overpotential of p + -Si/Ni electrodes for the oxygen-evolution reaction.

25 ENERGY STORAGE↗
DOE OSTI2020

Modeling Oxygen Transport in High Surface Area Carbon Supports for Polymer-Electrolyte Fuel Cells

Here, an analytical model for resistance to oxygen transport in air electrodes containing carbon black supports with high surface area was developed by combining a Thiele modulus—effectiveness factor approach at the agglomerate scale (~150 nm) with nanoscale diffusional resistance in carbon micropores/pits (~5 nm). This paper extends an earlier model for transport resistance to platinum nanoparticles on low surface area carbon. Differences in transport resistances between catalyst layers with high and low surface area carbon blacks predicted by the model with reasonable geometric dimensions and physical properties are consistent with experimental observations.

08 HYDROGEN↗
DOE OSTI2025

Advanced Brine Processing to Enable U.S. Lithium Independence (CRADA Report)

Current production of LiOH, which is needed to make Li-ion battery cathode active materials, utilizes a multistep process including solar evaporation, precipitation with Na 2 CO 3 and then conversion to LiOH using Ca(OH) 2 . This process requires a large amount of land area for solar evaporation, the right weather conditions, and chemicals for the conversion process that result in NaCl and CaCO 3 waste products. The production of Ca(OH) 2 is very energy intensive and evolves significant quantities of CO 2 . An alternative process flow utilizing direct lithium extraction techniques, followed by a chemical free conversion process can have benefits in reducing the needed land requirements and chemicals for traditional brine processing. There are many potential direct lithium extraction technologies that are currently being developed. The direct lithium extraction process from typical brine sources will produce a LiCl solution with some impurities including typically high concentrations of Na. This brine then needs to be converted to LiOH for use in battery cathode production. Ideally this conversion could occur without the use of additional chemicals. Electrochemistry can do this conversion either via electrolysis or bipolar membrane electrodialysis (BPED) to produce LiOH and HCl in solution. BPED utilized bipolar membranes to split water, which has a reduced potential as compared to splitting water at electrodes into hydrogen and oxygen gas. This reduced potential required results in a significant energy savings for BPED over electrolysis methods. This CRADA project aimed to develop such an integrated process using direct lithium extraction followed by BPED to produce a LiOH solution. That solution can then be crystallized into battery grade LiOH. In particular, Albemarle utilized a direct lithium extraction process to produce a concentrated LiCl solution that could be used for the BPED process. The BPED process was first tested using various LiCl solutions with impurity ions added at bench scale to understand the effects of impurities and determine processing parameters. Then testing was performed using the direct lithium extracted brine at the bench scale before scaling the process up. After the process was scaled up a long duration test was carried out to estimate the lifetime of the membranes, which is key to the economics of the BPED process.

25 ENERGY STORAGE↗
DOE OSTI2023

Oxygen Reduction at PtNi Alloys in Direct Methanol Fuel Cells—Electrode Development and Characterization

Catalyst layers made from novel catalysts must be fabricated in a way that the catalyst can function to its full potential. To characterize a PtNi alloy catalyst for use in the cathode of Direct Methanol Fuel Cells (DMFCs), the effects of the manufacturing technique, ink composition, layer composition, and catalyst loading were here studied in order to reach the maximum performance potential of the catalyst. For a more detailed understanding, beyond the DMFCs performance measurements, we look at the electrochemically active surface area of the catalyst and charge-transfer resistance, as well as the layer quality and ink properties, and relate them to the aspects stated above. As a result, we make catalyst layers with optimized parameters by ultrasonic spray coating that shows the high performance of the catalyst even when containing less Pt than commercial products. Using this approach, we can adjust the catalyst layers to the requirements of DMFCs, hydrogen fuel cells, or polymer electrolyte membrane electrolysis cells.

30 DIRECT ENERGY CONVERSION↗
NASA NTRS1972

Carbon dioxide concentrator

Passed exhaled air through electrochemical cell containing alkali metal carbonate aqueous solution, and utilizes platinized electrodes causing reaction of oxygen at cathode with water in electrolyte, producing hydroxyl ions which react with carbon dioxide to form carbonate ions.

Williams, C. F.↗
NASA NTRS1989

Recent advances in solid polymer electrolyte fuel cell technology with low platinum loading electrodes

High power density fuel cell systems for defense and civilian applications are being developed. Taking into consideration the main causes for efficiency losses (activation, mass transport and ohmic overpotentials) the only fuel cell systems capable of achieving high power densities are the ones with alkaline and solid polymer electrolyte. High power densities (0.8 W/sq cm at 0.8 V and 1 A/sq cm with H2 and O2 as reactants), were already used in NASA's Apollo and Space Shuttle flights as auxiliary power sources. Even higher power densities (4 W/sq cm - i.e., 8 A sq cm at 0.5 V) were reported by the USAF/International Fuel Cells in advanced versions of the alkaline system. High power densities (approximately 1 watt/sq cm) in solid polymer electrolyte fuel cells with ten times lower platinum loading in the electrodes (i.e., 0.4 mg/sq cm) were attained. It is now possible to reach a cell potential of 0.620 V at a current density of 2 A/sq cm and at a temperature of 95 C and pressure of 4/5 atm with H2/O2 as reactants. The slope of the linear region of the potential-current density plot for this case is 0.15 ohm-sq cm. With H2/air as reactants and under the same operating conditions, mass transport limitations are encountered at current densities above 1.4 A/sq cm. Thus, the cell potential at 1 A/sq cm with H2/air as reactants is less than that with H2/O2 as reactants by 40 mV, which is the expected value based on electrode kinetics of the oxygen reduction reaction, and at 2 A/sq cm with H2/air as reactant is less than the corresponding value with H2/O2 as reactants by 250 mV, which is due to the considerably greater mass transport limitations in the former case.

Srinivasan, Supramaniam↗
NASA NTRS1991

High energy efficiency and high power density proton exchange membrane fuel cells: Electrode kinetics and mass transport

The development of proton exchange membrane (PEM) fuel cell power plants with high energy efficiencies and high power densities is gaining momentum because of the vital need of such high levels of performance for extraterrestrial (space, underwater) and terrestrial (power source for electric vehicles) applications. Since 1987, considerable progress has been made in achieving energy efficiencies of about 60 percent at a current density of 200 mA/sq cm and high power densities (greater than 1 W/sq cm) in PEM fuel cells with high (4 mg/sq cm) or low (0.4 mg/sq cm) platinum loadings in electrodes. The following areas are discussed: (1) methods to obtain these high levels of performance with low Pt loading electrodes - by proton conductor impregnation into electrodes, localization of Pt near front surface; (2) a novel microelectrode technique which yields electrode kinetic parameters for oxygen reduction and mass transport parameters; (3) demonstration of lack of water transport from anode to cathode; (4) modeling analysis of PEM fuel cell for comparison with experimental results and predicting further improvements in performance; and (5) recommendations of needed research and development for achieving the above goals.

Supramaniam Srinivasan↗
NASA NTRS2006

Advanced Catalysts for Fuel Cells

This viewgraph presentation reviews the development of catalyst for Fuel Cells. The objectives of the project are to reduce the cost of stack components and reduce the amount of precious metal used in fuel cell construction. A rapid combinatorial screening technique based on multi-electrode thin film array has been developed and validated for identifying catalysts for oxygen reduction; focus shifted from methanol oxidation in FY05 to oxygen reduction in FY06. Multi-electrode arrays of thin film catalysts of Pt-Ni and Pt-Ni-Zr have been deposited. Pt-Ni and have been characterized electrochemically and structurally. Pt-Ni-Zr and Pt-Ni films show higher current density and onset potential compared to Pt. Electrocatalytic activity and onset potential are found to be strong function of the lattice constant. Thin film Pt(59)Ni(39)Zr(2) can provide 10 times the current density of thin film Pt. Thin film Pt(59)Ni(39)Zr(2) also shows 65mV higher onset potential than Pt.

fuel cells↗
DOE OSTI2020

Deciphering the Oxygen Absorption Pre-edge: A Caveat on its Application for Probing Oxygen Redox Reactions in Batteries

The pre-edges of oxygen-K X-ray absorption spectra have been ubiquitous in transition metal (TM) oxide studies in various fields, especially on the fervent topic of oxygen redox states in battery electrodes. However, critical debates remain on the use of the O-K pre-edge variations upon electrochemical cycling as evidences of oxygen redox reactions, which has been a popular practice in the battery field. This study presents an investigation of the O-K pre-edge of 55 oxides covering all 3d TMs with different elements, structures, and electrochemical states through combined experimental and theoretical analyses. It is shown unambiguously that the O-K pre-edge variation in battery cathodes is dominated by changing TM-d states. Furthermore, the pre-edge enables a unique opportunity to project the lowest unoccupied TM-d states onto one common energy window, leading to a summary map of the relative energy positions of the low-lying TM states, with higher TM oxidation states at lower energies, corresponding to higher electrochemical potentials. The results naturally clarify some unusual redox reactions, such as Cr 3+/6+ . This work provides a critical clarification on O-K pre-edge interpretation and more importantly a benchmark database of O-K pre-edge for characterizing redox reactions in batteries and other energy materials.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Utilizing Oxygen Redox in Layered Cathode Materials from Multiscale Perspective

We report in high-capacity layered oxide cathode materials, utilization of lattice oxygen as a redox center is considered to be one of the most promising approaches to overcome the capacity limitation set by conventional transition metal redox centers. However, rapid material degradation is often associated with oxygen oxidation, leading to formidable challenges in utilizing oxygen redox. Further mechanistic understanding of the oxygen activities thus becomes critical to better control oxygen redox reactions. This review summarizes recent advances for investigating oxygen redox reactions in cathode materials from a multiscale perspective, i.e., from the atomistic level to the microstructure regime. First the mechanistic aspects of oxygen redox and the consequences of this reaction on various electrode degradation pathways during battery operation (e.g., oxygen loss, transition metal migration, irreversible phase transition), relating structural changes at the crystallographic scale to those at the macro scale, are discussed. Then recent developments based on atomic and microstructure modifications that are promising for improving the reversibility of oxygen redox reaction or mitigating the harmful processes arising from oxidation of the oxygen centers under high operating voltage are recounted. The analysis is concluded with a commentary on further research directions toward optimizing the oxygen activity for high-capacity charge storage.

25 ENERGY STORAGE↗
NASA NTRS1989

Electrochemical cell for obtaining oxygen from carbon dioxide atmospheres

For manned missions to Mars to become a reality, an efficient and reliable means of obtaining oxygen from the carbon dioxide-rich atmosphere will be required. Otherwise, the high cost of transporting the oxygen needed to sustain the astronauts will severely restrict the expedition to the martian surface. Recently, the use of electrochemical devices has been explored as a means of obtaining oxygen from the carbon dioxide-rich atmosphere. In these devices, oxygen ions diffuse through solid oxide membranes, thus, separating oxygen from the other gases presented. This phenomenon has only recently been explored as a means of obtaining large quantities of oxygen from toxic atmospheres, although first observed by Walter nernst in 1899. Nernst observed that stabilized zirconia will conduct oxygen ions when an electrical potential is applied across metallic electrodes applied to the ceramic membrane. Diatomic oxygen molecules are dissociated at the positive electrode/electrolyte interface. The oxygen ions enter the ceramic body due to the ion density gradient which is produced by the electrical potential across the electrolytic membrane. Once the ions have diffused through the membrane, they reform diatomic oxygen molecules at the anode. The separation of oxygen from carbon dioxide is achieved by the combination of thermal and electrochemical processes. The thermal decomposition of carbon dioxide (at 1000 C) results in the production of carbon monoxide and oxygen by the reaction.

Hooker, M. W.↗
DOE OSTI2024

High-Performance AEM LTE with Advanced Membranes, Ionomers and PGM-Free Electrodes

Alkaline low temperature electrolysis (LTE) systems enjoy several potential advantages over acid-based LTE systems including facile oxygen evolution reaction (OER) kinetics and electrodes that can use little to no platinum group metals (PGM). The polymer membranes and membrane electrode assembly (MEA) structures going into alkaline electrochemical systems have seen significant advances in recent years. The objective of this project is to combine state-of-the-art alkaline polymer electrolyzer components into one optimized membrane electrode assembly (MEA) system to achieve DOE low temperature electrolysis (LTE) goals. The benefit of individual component advances cannot be fully appreciated until all aspects and components of the MEA are working at an equally high level of performance. New electrode fabrication methods were developed where solvent cast catalyst/ionomer solutions were used in place of insoluble ionomers to significantly improve adhesion. The membranes were improved in terms of durability and mechanical properties. The OER and HER catalysts were improved and made more durable.

08 HYDROGEN↗
DOE OSTI2023

Engineering catalytical electrodes for applications in energy areas

An ink formulation and electrode that enhances hydrogen production, oxygen production, carbon dioxide reduction and other electrocatalytic reactions. Embodiments include an ink formulation with polymer binders having different catalytical precursors and a 3D electrode produced by additive manufacturing from the inventor's ink formulation. Various embodiments of the inventor's apparatus, systems, and methods provide inks that that are 3D-printed into patterns that optimize surface area and flow. The catalytic materials are imbedded into the ink matrix which is then printed into a 3D structure that has architecture that optimizes surface area and flow properties.

Liang, Siwei↗
DOE OSTI2022

Defect redistribution along grain boundaries in SrTiO 3 by externally applied electric fields

During thermal annealing at 1425 °C nominal electric field strengths of 50 V/mm and 150 V/mm were applied along the grain boundary planes of a near 45° (100) twist grain boundary in SrTiO 3 . Electron microscopy characterization revealed interface expansions near the positive electrode around 0.8 nm for either field strength. While the interface width decreased to roughly 0.4 nm after annealing at 50 V/mm, the higher field strength caused decomposition of the boundary structure close to the negative electrode. Electron energy-loss and X-ray photoelectron spectroscopies demonstrated an increased degree of oxygen sublattice distortion at the negative electrode side, and enhanced concentrations of Ti 3+ and Ti 2+ compared to bulk for both single crystals and bicrystals annealed with an external electric field, respectively. Oxygen migration due to the applied electric field causes the observed alteration of grain boundary structures. At sufficiently high field strength the agglomeration of anion vacancies may lead to the decomposition of the grain boundary.

36 MATERIALS SCIENCE↗