Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “oxide interface”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 271 records · Page 15

Hydrogen activation by rhodium under the cover of a copper oxide thin film

Here, the activation of reactants by catalytically active metal sites at metal-oxide interfaces is important for understanding the effect of metal-support interactions on nanoparticle catalysts and for tuning activity and selectivity. Using a combined experimental and theoretical approach, we studied the activation of H 2 and the effect of CO poisoning on isolated Rh atoms completely or partially covered by a copper oxide (Cu 2 O) thin film. Temperature-programmed desorption (TPD) experiments conducted in ultra-high vacuum (UHV) show that neither a partially nor a fully oxidized Cu 2 O layer grown on a Rh/Cu(111) single-atom alloy can activate hydrogen in UHV. However, in situ ambient pressure X-ray photoelectron spectroscopy (AP-XPS) experiments performed at elevated H 2 pressures reveal that Rh significantly accelerates the reduction of these Cu 2 O thin films by hydrogen. Remarkably, the fastest reduction rate is observed for the fully oxidized sample with all Rh sites covered by Cu 2 O. Both TPD and AP-XPS data demonstrate that these covered Rh sites are inaccessible to CO, indicating that Rh under Cu 2 O is active for H 2 dissociation but cannot be poisoned by CO. In contrast, an incomplete oxide film leaves some of the Rh sites exposed and accessible to CO, and hence prone to CO poisoning. Density functional theory calculations demonstrate that unlike many reactions in which hydrogen activation is rate limiting, the rate-determining step in the dissociation of H 2 on thin-film Cu 2 O with Rh underneath is the adsorption of H 2 on the buried Rh site, and once adsorbed, the dissociation of H 2 is barrierless. These calculations also explain why H 2 can only be activated at higher pressures. Together, these results highlight how different the reactivity of atomically dispersed Rh in Cu can be depending on its accessibility through the oxide layer, providing a way to engineer Rh sites that are active for hydrogen activation but resilient to CO poisoning.

36 MATERIALS SCIENCE↗

CO 2 hydrogenation on Pt, Pt/SiO 2 and Pt/TiO 2 : Importance of synergy between Pt and oxide support

In this paper we combined density functional theory (DFT), kinetic Monte Carlo (KMC) simulations and experimental measurements to gain insight into the mechanisms of CO 2 conversion by hydrogen on the Pt nanoparticle (NP). The results show that in spite of the presence of active, low-coordinated sites, Pt NP alone is not able to catalyze the reaction due to the weak CO 2 binding on the catalyst. Once CO 2 is stabilized, the hydrogenation of CO 2 to CO via the reverse-water–gas shift (RWGS) reaction is promoted; in contrast, the enhancement for further *CO hydrogenation to CH 4 is less significant and no CH 3 OH is observed. The selectivity to CO is mainly determined by CO binding energy and the energetics of *CO hydrogenation to *HCO, while that for CH 4 and CH 3 OH is determined by the competition between hydrogenation and C–O bond scission reactions of the *H 2 COH species. Using SiO 2 and TiO 2 as the support, Pt NP is able to promote the overall CO 2 conversion, while the impact on the selectivity is rather small. The theoretically predicted trend in activity and selectivity is in good agreement with the experimental results. Finally, the enhanced activity of Pt/oxide over Pt is originated from the sites at the Pt–oxide interface, where the synergy between Pt and oxide plays an important role.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

High- T c superconductivity at the interface between the CaCuO 2 and SrTiO 3 insulating oxides

At interfaces between complex oxides it is possible to generate electronic systems with unusual electronic properties, which are not present in the isolated oxides. One important example is the appearance of superconductivity at the interface between insulating oxides, although, until now, with very low T c . We report the occurrence of high T c superconductivity in the bilayer CaCuO 2 /SrTiO 3 , where both the constituent oxides are insulating. In order to obtain a superconducting state, the CaCuO 2 /SrTiO 3 interface must be realized between the Ca plane of CaCuO 2 and the TiO 2 plane of SrTiO 3 . Only in this case can oxygen ions be incorporated in the interface Ca plane, acting as apical oxygen for Cu and providing holes to the CuO 2 planes. In addition, a detailed hole doping spatial profile can be obtained by scanning transmission electron microscopy and electron-energy-loss spectroscopy at the O K edge, clearly showing that the (super)conductivity is confined to about 1–2 CaCuO 2 unit cells close to the interface with SrTiO 3 . The results obtained for the CaCuO 2 /SrTiO 3 interface can be extended to multilayered high T c cuprates, contributing to explaining the dependence of T c on the number of CuO 2 planes in these systems.

36 MATERIALS SCIENCE↗

Depth-resolved charge reconstruction at the LaNi O 3 / CaMn O 3 interface

Here, rational design of low-dimensional electronic phenomena at oxide interfaces is currently considered to be one of the most promising schemes for realizing new energy-efficient logic and memory devices. An atomically abrupt interface between paramagnetic LaNiO 3 and antiferromagnetic CaMnO 3 exhibits interfacial ferromagnetism, which can be tuned via a thickness-dependent metal-insulator transition in LaNiO 3 . Once fully understood, such emergent functionality could turn this archetypal Mott-interface system into a key building block for the above-mentioned future devices. Here, we use depth-resolved standing-wave photoemission spectroscopy in conjunction with scanning transmission electron microscopy and x-ray absorption spectroscopy, to demonstrate a depth-dependent charge reconstruction at the LaNiO 3 /CaMnO 3 interface. Our measurements reveal an increased concentration of Mn 3+ and Ni 2+ cations at the interface, which create an electronic environment favorable for the emergence of interfacial ferromagnetism mediated via the Mn 4+ -Mn 3+ ferromagnetic double exchange and Ni 2+ -O-Mn 4+ superexchange mechanisms. Our findings suggest a strategy for designing functional Mott oxide heterostructures by tuning the interfacial cation characteristics via controlled manipulation of thickness, strain, and ionic defect states.

36 MATERIALS SCIENCE↗

Understanding of catalytic behaviors of TiO2/CuOx catalysts

Aiming to reveal the catalysis at the metal-oxide and oxide-oxide interfaces,1,2 the water-gas shift reaction (WGS, CO + H2O and #61664; CO2 + H2) and CO oxidation (2CO + O2 and #61664; 2CO2) at the interface of the Cu(111) and Cu2O(111) supported TiO2 clusters were studied based on DFT calculations

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Polaronic behavior in a weak-coupling superconductor

We report the nature of superconductivity in the dilute semiconductor SrTiO 3 has remained an open question for more than 50 y. The extremely low carrier densities (10 18 –10 20 cm -3 ) at which superconductivity occurs suggest an unconventional origin of superconductivity outside of the adiabatic limit on which the Bardeen–Cooper–Schrieffer (BCS) and Migdal–Eliashberg (ME) theories are based. We take advantage of a newly developed method for engineering band alignments at oxide interfaces and access the electronic structure of Nb-doped SrTiO 3 , using high-resolution tunneling spectroscopy. We observe strong coupling to the highest-energy longitudinal optic (LO) phonon branch and estimate the doping evolution of the dimensionless electron–phonon interaction strength (λ). Upon cooling below the superconducting transition temperature (T c ), we observe a single superconducting gap corresponding to the weak-coupling limit of BCS theory, indicating an order of magnitude smaller coupling (λ BCS ≈0.1). These results suggest that despite the strong normal state interaction with electrons, the highest LO phonon does not provide a dominant contribution to pairing. Finally, they further demonstrate that SrTiO 3 is an ideal system to probe superconductivity over a wide range of carrier density, adiabatic parameter, and electron–phonon coupling strength.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Single trap in liquid gated nanowire FETs: Capture time behavior as a function of current

The basic reason for enhanced electron capture time, τ{sub c}, of the oxide single trap dependence on drain current in the linear operation regime of p{sup +}-p-p{sup +} silicon field effect transistors (FETs) was established, using a quantum-mechanical approach. A strong increase of τ{sub c} slope dependence on channel current is explained using quantization and tunneling concepts in terms of strong field dependence of the oxide layer single trap effective cross-section, which can be described by an amplification factor. Physical interpretation of this parameter deals with the amplification of the electron cross-section determined by both decreasing the critical field influence as a result of the minority carrier depletion and the potential barrier growth for electron capture. For the NW channel of n{sup +}-p-n{sup +} FETs, the experimentally observed slope of τ{sub c} equals (−1). On the contrary, for the case of p{sup +}-p-p{sup +} Si FETs in the accumulation regime, the experimentally observed slope of τ{sub c} equals (−2.8). It can be achieved when the amplification factor is about 12. Extraordinary high capture time slope values versus current are explained by the effective capture cross-section growth with decreasing electron concentration close to the nanowire-oxide interface.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Element redistributions during early stages of oxidation in a Ni38Cr22Fe20Mn10Co10 multi-principal element alloy

Element redistributions after initial gaseous oxidation of a Ni38Cr22Fe20Mn10Co10 (at%) multi-principle element alloy at 120°C and 300°C is captured via psuedo in situ atom probe tomography. All cations contribute to the oxide in both conditions, consisting of a Cr-rich inner oxide and Fe, Mn, Co and Ni-rich outer oxide. At the lower temperature, Ni tends to be trapped at the outer/inner oxide interface, while Ni enriches at the oxide/metal interface at higher temperature in tandem with Cr metal depletion. These observations confirm oxidation of complex alloys involves the formation of metastable, multi-layered oxide films, with a distinct tendency for solute trapping.

multi-principal element alloy, oxidation mechanism↗

Unified computational model of transport in metal-insulating oxide-metal systems

In this paper, a unified physics-based model of electron transport in metal-insulator-metal (MIM) systems is presented. In this model, transport through metal-oxide interfaces occurs by electron tunneling between the metal electrodes and oxide defect states. Transport in the oxide bulk is dominated by hopping, modeled as a series of tunneling events that alter the electron occupancy of defect states. Electron transport in the oxide conduction band is treated by the drift–diffusion formalism and defect chemistry reactions link all the various transport mechanisms. It is shown that the current-limiting effect of the interface band offsets is a function of the defect vacancy concentration. These results provide insight into the underlying physical mechanisms of leakage currents in oxide-based capacitors and steady-state electron transport in resistive random access memory (ReRAM) MIM devices. An explanation of ReRAM bipolar switching behavior based on these results is proposed.

36 MATERIALS SCIENCE↗

Research Update: Interface-engineered oxygen octahedral tilts in perovskite oxide heterostructures

Interface engineering of structural distortions is a key for exploring the functional properties of oxide heterostructures and superlattices. In this paper, we report on our comprehensive investigations of oxygen octahedral distortions at the heterointerface between perovskite oxides SrRuO{sub 3} and BaTiO{sub 3} on GdScO{sub 3} substrates and of the influences of the interfacially engineered distortions on the magneto-transport properties of the SrRuO{sub 3} layer. Our state-of-the-art annular bright-field imaging in aberration-corrected scanning transmission electron microscopy revealed that the RuO{sub 6} octahedral distortions in the SrRuO{sub 3} layer have strong dependence on the stacking order of the SrRuO{sub 3} and BaTiO{sub 3} layers on the substrate. This can be attributed to the difference in the interfacial octahedral connections. We also found that the stacking order of the oxide layers has a strong impact on the magneto-transport properties, allowing for control of the magnetic anisotropy of the SrRuO{sub 3} layer through interface engineering. Our results demonstrate the significance of the interface engineering of the octahedral distortions on the structural and physical properties of perovskite oxides.

36 MATERIALS SCIENCE↗

Interface composition between Fe{sub 3}O{sub 4} nanoparticles and GaAs for spintronic applications

Recent interest in spintronic applications has necessitated the study of magnetic materials in contact with semiconductor substrates; importantly, the structure and composition of these interfaces can influence both device functionality and the magnetic properties. Nanoscale ferromagnet/semiconductor structures are of particular interest. In this study, the interface structure between a monolayer of ferromagnetic magnetite (Fe{sub 3}O{sub 4}) nanoparticles and a GaAs substrate was studied using cross-sectional transmission electron microscopy techniques. It was found that a continuous amorphous oxide interface layer separates the nanoparticles from the GaAs substrate, and that iron diffused into the interface layer forming a compositional gradient. Electron energy-loss near-edge fine structures of the O K absorption edge revealed that the amorphous oxide is composed of γ-Fe{sub 2}O{sub 3} directly underneath the Fe{sub 3}O{sub 4} nanoparticles, followed by a solid solution of Ga{sub 2}O{sub 3} and FeO and mostly Ga{sub 2}O{sub 3} when approaching the buckled oxide/substrate interface. Real-space density functional theory calculations of the dynamical form factor confirmed the experimental observations. The implication of the findings on the optimization of these structures for spin injection is discussed.

36 MATERIALS SCIENCE↗

Manifestation of excess centers of electron-hole pair generation resulting from field and thermal stresses and their subsequent annihilation in dynamic current-voltage characteristics of Si-MOS structures with ultrathin oxide

Formation of centers of electron-hole pair generation near the silicon-oxide interface under field and thermal effects on Si-MOS structures with ultrathin oxide and poststress annihilation of these structures are studied. Concentrations of generation centers of minority charge carriers (holes) are determined from experimental dynamic current-voltage characteristics of Si-MOS diodes by fixing the accumulation duration of the equilibrium hole density near the surface separating the semiconductor and insulator during the sample transition from a deep depletion state to a pronounced inversion state. It is shown that MOS structures with ultrathin oxide are much more 'pliable' to field and thermal stresses in comparison with samples with thick a insulating layer: objects with ultrathin oxide are more easily damaged by external stresses, but more rapidly recover to the initial state at room temperature.

36 MATERIALS SCIENCE↗

Applications of aberration corrected scanning transmission electron microscopy and electron energy loss spectroscopy to thin oxide films and interfaces.

Aberration correction in the scanning transmission electron microscope allows spatial resolutions of the order of one ngstr m to be routinely achieved. When combined with electron energy loss spectroscopy, it is possible to simultaneously map the structure, the chemistry and even the electronic properties of materials in one single experiment. Here we will apply these techniques to the characterization of thin films and interfaces based on complex oxides with the perovskite structure. The relatively large lattice parameter of these materials combined with the fact that most of them have absorption edges within the reach of the spectrometer optics makes these materials ideal for these experiments. We will show how it is possible to map the chemistry of interfaces atomic plane by atomic plane, including light element imaging such as O. Applications to cobaltite and titanate thin films will be described.

36 MATERIALS SCIENCE↗

Nanoscale Interfacial Engineering for Flexible Barrier Films

Alternating layers of organic and oxide thin films used as diffusion barriers in emerging flexible device technologies are vulnerable to degradation under the influence of mechanical stresses, temperature cycling, photodegradation, and chemically active environmental species. Delamination of the internal organic to oxide interfaces often limits the operational lifetime of the barrier system. We demonstrate a method for increasing the adhesion of organic and oxide thin films by generating nanostructures at the interface. We show that the adhesion of an acrylate to silicon oxide model system can be increased by up to an order of magnitude (from ~2 J/ m 2 to 24 J/m 2 ). Here, by altering the diameter and depth of the patterns in the model systems, the adhesion energy can be changed, and the delamination pathway can be controlled. In addition, we show that a patterned interface maintains a higher adhesion than its planar counterpart for all durations of UV–A and UV–B exposure

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Exotic exchange bias at epitaxial ferroelectric-ferromagnetic interfaces

Multiferroics in spintronics have opened up opportunities for future technological developments, particularly in the field of ferroelectric (FE)-ferromagnetic (FM) oxide interfaces with functionalities. We find strong exchange bias shifts (up to 84 Oe) upon field cooling in metal-oxide (Fe/BaTiO{sub 3}) films combining FM and FE layers. The saturation magnetic moment of the FM layer is also significantly higher than in bulk (3.0 ± 0.2 μ{sub B}/atom) and the reversal mechanism occurs via a domain nucleation process. X-ray absorption spectroscopy at the Fe K-edge and Ba L3-edge indicate presence of few monolayers of antiferromagnetic FeO at the interface without the formation of any BaFeO{sub 3} layer. Polarized neutron reflectometry corroborates with our magnetization data as we perform depth profiling of the magnetic and structural densities in these bilayers. Our first principles density functional calculations support the formation of antiferromagnetic FeO layers at the interface along with an enhancement of Fe magnetic moments in the inner ferromagnetic layers.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗