Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “orbital order”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 271 records · Page 15
All sourcesNASA NTRSDOE OSTI
NASA NTRS2010

High-Precision Shape Control of In-Space Deployable Large Membrane/Thin-Shell Reflectors

This innovation has been developed to improve the resolutions of future spacebased active and passive microwave antennas for earth-science remote sensing missions by maintaining surface figure precisions of large membrane/thin-shell reflectors during orbiting. The intention is for these sensing instruments to be deployable at orbit altitudes one or two orders of magnitude higher than Low Earth Orbit (LEO), but still being able to acquire measurements at spatial resolution and sensitivity similar to those of LEO. Because active and passive microwave remote sensors are able to penetrate through clouds to acquire vertical profile measurements of geophysical parameters, it is desirable to elevate them to the higher orbits to obtain orbital geometries that offer large spatial coverage and more frequent observations. This capability is essential for monitoring and for detailed understanding of the life cycles of natural hazards, such as hurricanes, tropical storms, flash floods, and tsunamis. Major components of this high-precision antenna-surface-control system include a membrane/thin shell reflector, a metrology sensor, a controller, actuators, and corresponding power amplifier and signal conditioning electronics (see figure). Actuators are attached to the back of the reflector to produce contraction/ expansion forces to adjust the shape of the thin-material reflector. The wavefront-sensing metrology system continuously measures the surface figure of the reflector, converts the surface figure to digital data and feeds the data to the controller. The controller determines the control parameters and generates commands to the actuator system. The flexible, piezoelectric polymer actuators are thus activated, providing the control forces needed to correct any distortions that exist in the reflector surface. Piezoelectric polymer actuators are very thin and flexible. They can be implemented on the back of the membrane/thin-shell reflector without introducing significant amounts of mass or stiffness to the reflector. They can be rolled up or folded to accommodate the packaging needed for launch. An analytical model of the system, which includes the membrane reflector, actuator, and controller has been developed to investigate the functionality of this control system on a 35-meter-diameter membrane reflector. The performance of this system under external disturbances such as in space thermal loads and W-error due to inflation has been investigated. A subscale breadboard has been developed, and the functionality of this control concept has been demonstrated by this breadboard.

Watkins, Ronald↗
NASA NTRS1978

Orbital service module systems analysis study documentation. Volume 1: Executive summary

Potentially feasible system concepts for providing additional power, thermal control, and attitude to the baseline orbiter were investigated in order to support a greater variety of space missions and to extend the orbiter's ability to remain in orbit. Results of these analyses include an incremental growth plan that offers the flexibility of adding capability as, and when, it is needed in order to satisfy emerging user requirements.

Source record↗
NASA NTRS2011

Developing a Prototype ALHAT Human System Interface for Landing

The goal of the Autonomous Landing and Hazard Avoidance Technology (ALHAT) project is to safely execute a precision landing anytime/anywhere on the moon. This means the system must operate in any lighting conditions, operate in the presence of any thruster generated regolith clouds, and operate without the help of redeployed navigational aids or prepared landing site at the landing site. In order to reach this ambitious goal, computer aided technologies such as ALHAT will be needed in order to permit these landings to be done safely. Although there will be advanced autonomous capabilities onboard future landers, humans will still be involved (either onboard as astronauts or remotely from mission control) in any mission to the moon or other planetary body. Because many time critical decisions must be made quickly and effectively during the landing sequence, the Descent and Landing displays need to be designed to be as effective as possible at presenting the pertinent information to the operator, and allow the operators decisions to be implemented as quickly as possible. The ALHAT project has established the Human System Interface (HSI) team to lead in the development of these displays and to study the best way to provide operators enhanced situational awareness during landing activities. These displays are prototypes that were developed based on multiple design and feedback sessions with the astronaut office at NASA/ Johnson Space Center. By working with the astronauts in a series of plan/build/evaluate cycles, the HSI team has obtained astronaut feedback from the very beginning of the design process. In addition to developing prototype displays, the HSI team has also worked to provide realistic lunar terrain (and shading) to simulate a "out the window" view that can be adjusted to various lighting conditions (based on a desired date/time) to allow the same terrain to be viewed under varying lighting terrain. This capability will be critical to determining the effect of terrain/lighting on the human pilot, and how they use windows and displays during landing activities. The Apollo missions were limited to about 28 possible launch days a year due to lighting and orbital constraints. In order to take advantage of more landing opportunities and venture to more challenging landing locations, future landers will need to utilize sensors besides human eyes for scanning the surface. The ALHAT HSI system must effectively convey ALHAT produced information to the operator, so that landings can occur during less "optimal" conditions (lighting, surface terrain, slopes, etc) than was possible during Apollo missions. By proving this capability, ALHAT will simultaneously provide more flexible access to the moon, and greater safety margins for future landers. This paper will specifically focus on the development of prototype displays (the Trajectory Profile Display (TPD), Landing Point Designation (LPD), and Crew Camera View (CCV) ), implementation of realistic planetary terrain, human modeling, and future HSI plans.

Hirsh, Robert L.↗
NASA NTRS1971

Support requirements for remote sensor systems on unmanned planetary missions. Appendix A: Support requirement summary tables, phase 3

An appendix containing one page summary tables of sensor observation objectives, measurement capabilities, support requirments, and worth values is presented. Tables are arranged according to (1) sensor type number, (2) flyby mission number, (3) for multi-planet missions, in order of increasing distance from the sun, (4) for orbiter mission, by planets in order of increasing distance from the sun, and (5) by orbit number.

Source record↗
DOE OSTI2022

Materials under high pressure: a chemical perspective

At high pressure, the typical behavior of elements dictated by the periodic table, including oxidation numbers, stoichiometries in compounds, and reactivity, to name but a few, is altered dramatically. As pressure is applied, the energetic ordering of atomic orbitals shifts, allowing core orbitals to become chemically active, atypical electron congurations to occur, and in some cases,non-atom-centered orbitals to form in the interstices of solid structures. Strange stoichiometries, structures, and bonding motifs result. Crystal structure prediction tools, not burdened by preconceived notions about structural chemistry learned at atmospheric pressure, have been applied to great success to explore phase diagrams at high pressure, identifying novel structures in diverse chemical systems. Several of these phases have been subsequently synthesized. Experimentally, access to high-pressure regimes has been bolstered by advances in diamond anvil cell and dynamic com- pression techniques. Here, the joint efforts of experiment and theory have led to startling success stories in the realm of high-temperature superconductivity, identifying many novel phases (some of which have been synthesized) whose superconducting transition approaches room temperature.

36 MATERIALS SCIENCE↗
DOE OSTI2021

A Multireference Approach to Electron and Electron–Nuclear Dynamics in Nanomaterials (Final Report)

Many important chemical and physical phenomena involve dynamics on large number of electronic states. Thus, there is a critical need to develop methods to simulate dynamics in dense manifolds of states. Towards this end, we have: a) developed the multiple cloning in dense manifolds of states (MCDMS) method, which is capable of accurately modeling the quantum mechanical coherence between populations on a large number of electronic states, b) implemented MCDMS into the free, open-source PySpawn software package, c) developed graphics processing unit-accelerated algorithms modeling electron dynamics in light fields via Floquet time-dependent configuration interaction (F-TDCI), and d) critically compared different orbital bases in order to achieve an accurate and efficient F-TDCI expansion. This grant ended in August 2020, when our group moved to from Michigan State University to Stony Brook University, where this project continues under grant number DE-SC0021643.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Machine Learning Predictions of Transition Probabilities in Atomic Spectra

Forward modeling of optical spectra with absolute radiometric intensities requires knowledge of the individual transition probabilities for every transition in the spectrum. In many cases, these transition probabilities, or Einstein A-coefficients, quickly become practically impossible to obtain through either theoretical or experimental methods. Complicated electronic orbitals with higher order effects will reduce the accuracy of theoretical models. Experimental measurements can be prohibitively expensive and are rarely comprehensive due to physical constraints and sheer volume of required measurements. Due to these limitations, spectral predictions for many element transitions are not attainable. In this work, we investigate the efficacy of using machine learning models, specifically fully connected neural networks (FCNN), to predict Einstein A-coefficients using data from the NIST Atomic Spectra Database. For simple elements where closed form quantum calculations are possible, the data-driven modeling workflow performs well but can still have lower precision than theoretical calculations. For more complicated nuclei, deep learning emerged more comparable to theoretical predictions, such as Hartree–Fock. Unlike experiment or theory, the deep learning approach scales favorably with the number of transitions in a spectrum, especially if the transition probabilities are distributed across a wide range of values. It is also capable of being trained on both theoretical and experimental values simultaneously. In addition, the model performance improves when training on multiple elements prior to testing. The scalability of the machine learning approach makes it a potentially promising technique for estimating transition probabilities in previously inaccessible regions of the spectral and thermal domains on a significantly reduced timeline.

74 ATOMIC AND MOLECULAR PHYSICS↗
DOE OSTI2020

The BAT AGN Spectroscopic Survey. XVIII. Searching for Supermassive Black Hole Binaries in X-Rays

Theory predicts that a supermassive black hole binary (SMBHB) could be observed as a luminous active galactic nucleus (AGN) that periodically varies on the order of its orbital timescale. In X-rays, periodic variations could be caused by mechanisms including relativistic Doppler boosting and shocks. In this paper we present the first systematic search for periodic AGNs using 941 hard X-ray light curves (14–195 keV) from the first 105 months of the Swift Burst Alert Telescope (BAT) survey (2004–2013). We do not find evidence for periodic AGNs in Swift-BAT, including the previously reported SMBHB candidate MCG+11–11–032. We find that the null detection is consistent with the combination of the upper-limit binary population in AGNs in our adopted model, their expected periodic variability amplitudes, and the BAT survey characteristics. We have also investigated the detectability of SMBHBs against normal AGN X-ray variability in the context of the extended ROentgen Survey with an Imaging Telescope Array (eROSITA) survey. Under our assumptions of a binary population and the periodic signals they produce, which have long periods of hundreds of days, up to 13% true periodic binaries can be robustly distinguished from normal variable AGNs with the ideal uniform sampling. However, we demonstrate that realistic eROSITA sampling is likely to be insensitive to long-period binaries because longer observing gaps reduce their detectability. In contrast, large observing gaps do not diminish the prospect of detecting binaries of short, few-day periods, as 19% can be successfully recovered, the vast majority of which can be identified by the first half of the survey.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2020

Retention of Long-period Gas Giant Planets: Type II Migration Revisited

During their formation, emerging protoplanets tidally interact with their natal disks. Proto–gas giant planets, with Hill radii larger than the disk thickness, open gaps and quench gas flow in the vicinity of their orbits. It is usually assumed that their type II migration is coupled to the viscous evolution of the disk. Although this hypothesis provides an explanation for the origin of close-in planets, it also encounters a predicament on the retention of long-period orbits for most gas giant planets. Moreover, numerical simulations indicate that the planets' migrations are not solely determined by the viscous diffusion of their natal disk. In this work, we carry out a series of hydrodynamic simulations combined with analytic studies to examine the transition between different paradigms of type II migration. We find a range of planetary mass for which gas continues to flow through a severely depleted gap so that the surface density distribution in the disk region beyond the gap is maintained in a quasi-steady state. The associated gap profile modifies the location of corotation and Lindblad resonances. In the proximity of the planet's orbit, high-order Lindblad and corotation torque are weakened by the gas depletion in the gap, while low-order Lindblad torques near the gap walls preserve their magnitude. Consequently, the intrinsic surface density distribution of the disk delicately determines both the pace and direction of the planets' type II migration. We show that this effect might stall the inward migration of giant planets and preserve them in disk regions where the surface density is steep.

79 ASTRONOMY AND ASTROPHYSICS↗
NASA NTRS1972

A magnetic control system for attitude acquisition

A spacecraft magnetic attitude acquisition system is reported that is capable of automatically despinning a satellite from arbitrarily high rates around any axis and provides terminal orientation that makes capture by conventional fine control attitude control systems routine. The system consists of a 3-axis magnetometer, a set of 3 orthogonal magnets, and appropriate control logic. A well-configured system results in despin times of the order of 5 orbits per rpm for spacecraft in low earth orbits. Following despin, terminal orientation is achieved after another one to three orbits, depending on the capture range of the associated fine control system.

Stickler, A. C.↗
NASA NTRS1974

Influence of configuration details on the subsonic characteristics of a space shuttle orbiter design

An investigation was conducted in the Langley low-turbulence pressure tunnel of a model of a space shuttle orbiter design in order to determine the influence of minor configuration geometric details on the aerodynamic characteristics at subsonic speeds. A plane wing was tested with a small planform fillet; a twisted wing was tested with both a small and a large planform fillet. Tailored attitude-control propulsion-system wing-tip and body pods, trisegmented elevons, and canopy effects were also investigated. The tests were conducted at angles of attack from -3 deg to 24 deg for sideslip angles of 0 deg and 6 deg and at a Mach number of 0.25.

Decker, J. P.↗
NASA NTRS1978

GEOS-3 coherent C-band tracking data reduction and analysis

The availability of a coherent C-Band transponder on an orbiting vehicle has permitted the development of calibration techniques for C-Band radars. Prior coherent tracking was limited to test vehicles in powered flight or skin tracking of orbiting spacecraft. The pulse Doppler range rate data available concurrently and independently with normal range and angle data provides an extremely useful data set for assessing the internal consistency of the radars measurements, particularly when coupled with a trajectory well constrained by orbit dynamics. In order to further assess the precision of the range rate data, a technique was developed to numerically integrate the rate measurements into a pseudo-range data set showing extremely low noise and high sensitivity to systematic radar errors. Evaluation of integrated range data led to improvements in calibration of both the rate and conventional range data. In particular, proper evaluation of the very sensitive integrated ranges required the development of a processing correction for beacon delay variation with signal strength, a significant error in the conventional ranging data.

Krabill, W. B.↗
NASA NTRS1978

Possible correlation of Io's posteclipse brightening with major solar flares

In 6 of the 7 instances where posteclipse brightening of Io has been reported by observers using blue filters, a major solar flare occurred within 10 degrees of the sub-Jovian longitude in the 100-day interval prior to observation. In none of the 18 instances where no posteclipse brightening was observed did such a flare occur. It is proposed that a phenomenon associated with a major solar flare causes an increase in the trapped particle flux at Io's orbit by an order of magnitude. The posteclipse brightening may be caused by thermoluminescence of Io's surface material upon emergence. Alternatively, it is possible that the increase in trapped particle flux would warm the surface, creating a temporary atmosphere which would precipitate during eclipse cooling and vaporize in the period of warming after reemergence.

Nelson, R. M.↗
NASA NTRS1980

Analysis of the charging of the SCATHA (P78-2) satellite

The charging of a large object in polar Earth orbit was investigated in order to obtain a preliminary indication of the response of the shuttle orbiter to such an environment. Two NASCAP (NASA Charging Analyzer Program) models of SCATHA (Satellite Charging at High Altitudes) were used in simulations of charging events. The properties of the satellite's constituent materials were compiled and representations of the experimentally observed plasma spectra were constructed. Actual charging events, as well as those using test environments, were simulated. Numerical models for the simulation of particle emitters and detectors were used to analyze the operation of these devices onboard SCATHA. The effect of highly charged surface regions on the charging conductivity within a photosheath was used to interpret results from the onboard electric field experiment. Shadowing calculations were carried out for the satellite and a table of effective illuminated areas was compiled.

Stannard, P. R.↗
NASA NTRS1978

Chemical releases

A Chemical Release Module to be carried into orbit by the shuttle is described. The module would release chemicals from orbiting satellites in order understand processes within the Earth's magnetosphere, atmosphere and ionosphere. A large number of potential experiments are identified, ranging from introducing traceable material into the solar wind in order to study its transport to and within the magnetosphere, to injecting material into the outer magnetosphere to simulate the precipitation of trapped charged particles, to the release of material at lower altitudes to create waves both mechanical and electromagnetic.

Heppner, J. P.↗
NASA NTRS1981

Titan's hydrogen torus

A model of Titan's hydrogen torus, capable of describing its time evolution under the influence of the gravitational fields of both the satellite and the planet, is presented. Estimated lifetimes for hydrogen atoms near Titan's orbit of the order of 10 to the 7th s, based on recent Pioneer 11 measurements, suggest that the torus completely encircles Saturn and is angularly unsymmetric, having an enhanced gas density near the satellite. New model calculations confirm this and provide an explanation for the torus detected by the Copernicus satellite and the UV instrument of Pioneer 11. Agreement between calculated and observed Lyman alpha intensities suggests a hydrogen escape flux between 1 x 10 to the 9th/sq cm-s and 3 x 10 to the 9th/sq cm-s should be operative at Titan. This produces a torus containing some 10 to the 34th hydrogen atoms.

Smyth, W. H.↗
NASA NTRS1982

On the shape and orientation control of an orbiting shallow spherical shell structure

The dynamics of orbiting shallow flexible spherical shell structures under the influence of control actuators was studied. Control laws are developed to provide both attitude and shape control of the structure. The elastic modal frequencies for the fundamental and lower modes are closely grouped due to the effect of the shell curvature. The shell is gravity stabilized by a spring loaded dumbbell type damper attached at its apex. Control laws are developed based on the pole clustering techniques. Savings in fuel consumption can be realized by using the hybrid shell dumbbell system together with point actuators. It is indicated that instability may result by not including the orbital and first order gravity gradient effects in the plant prior to control law design.

Bainum, P. M.↗