Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “nanocluster”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

269 records · Page 15
All sourcesNASA NTRSDOE OSTI
NASA NTRS1998

Fabrication and Characterization of Thin Film Ion Implanted Composite Materials for Integrated Nonlinear Optical Devices

Ion implantation has been shown to produce a high density of metal colloids within the layer regions of glasses and crystalline materials. The high-precipitate volume fraction and small size of metal nanoclusters formed leads to values for the third-order susceptibility much greater than those for metal doped solids. This has stimulated interest in use of ion implantation to make nonlinear optical materials. On the other side, LiNbO3 has proved to be a good material for optical waveguides produced by MeV ion implantation. Light confinement in these waveguides is produced by refractive index step difference between the implanted region and the bulk material. Implantation of LiNbO3 with MeV metal ions can therefore result into nonlinear optical waveguide structures with great potential in a variety of device applications. We describe linear and nonlinear optical properties of a waveguide structure in LiNbO3-based composite material produced by silver ion implantation in connection with mechanisms of its formation.

Sarkisov, S.↗
NASA NTRS2002

Infrared Emission From Interstellar PAHs, New Probes of the Interstellar Medium

Tremendous strides have been made in the understanding of interstellar material over the past twenty years thanks to significant, parallel developments in two closely related areas: observational IR astronomy and laboratory astrophysics. Twenty years ago the composition of interstellar dust was largely unknown and the notion of abundant, gas phase, polycyclic aromatic hydrocarbons (PAHs) anywhere in the interstellar medium (ISM) considered impossible. Today the dust composition of the diffuse and dense ISM is reasonably well constrained and the spectroscopic case for interstellar PAHs, impossibly large molecules by early interstellar chemistry standards, is very strong. PAH spectral features are now being used as new probes of the ISM. PAH ionization states reflect the ionization balance of the medium while PAH size and structure reflect the energetic and chemical history of the medium. Aromatic carbon-rich materials ranging in size from PAHs and PAH nanoclusters, to sub-micron and micron-sized dust grains represent an important component of the ISM. These species: (1) dominate the heating and cooling of interstellar clouds via energetic photoelectron ejection and infrared (IR) emission; (2) moderate the ionization balance in photodissociation regions and molecular clouds; (3) moderate the composition of the gas phase and play an important role in determining the chemistry of the ISM; (4) contribute to the interstellar extinction in the near IR, visible, and UV spectral regions; and (5) convert UV, visible, and near-IR radiation to mid- and far-IR radiation in the ISM and, as such, are responsible for the well known, widespread family of mid-IR emission features with major components near 3.3, 6.2, 7.7, 8.6, and 11.3 microns.

Hudgins, D. M.↗
NASA NTRS2011

Silicone nanocomposite coatings for fabrics

A silicone based coating for fabrics utilizing dual nanocomposite fillers providing enhanced mechanical and thermal properties to the silicone base. The first filler includes nanoclusters of polydimethylsiloxane (PDMS) and a metal oxide and a second filler of exfoliated clay nanoparticles. The coating is particularly suitable for inflatable fabrics used in several space, military, and consumer applications, including airbags, parachutes, rafts, boat sails, and inflatable shelters.

Eberts, Kenneth↗
DOE OSTI2024

Understanding the Chemical Complexity of Multicomponent Systems: Uranium Polyoxometalates as Nanosorbents

The overarching objective of this project was to develop a molecular-scale understanding of chemical interactions of the transuranic (TRU) elements with uranyl-based polyoxometalate nanoclusters (UPOMs). The specific goals that supported this overarching objective were to: (i) quantify TRU interactions with UPOMs as a function of TRU, carbonate, and UPOM concentration, pH, and temperature; (ii) examine the molecular-level bonding environment of TRU-UPOM complexes; and (iii) develop a rate expression capable of describing the sorption and reduction of TRU by UPOMs. The published literature suggests several potential interactions can occur in TRU-UPOM systems: (i) encapsulation of TRU and coordination with the internal ‘-yl’ oxygens of the UPOM, (ii) coordination of TRU with the external ‘-yl’ oxygens of the UPOM, and (iii) coordination of TRU with the bridging ligands (e.g., peroxo, hydroxo, oxalate) of the UPOM. The latter two may induce aggregation of the UPOMs. The concept of encapsulation is demonstrated by the X-ray diffraction structure of crystallized U 20 , which reveals a Na + cation under each pentagonal face (Sigmon et al., 2009). Computational modeling shows that, while the negative charge of U 20 is spread among all the oxygen atoms, the internal ‘-yl’ oxygens host the most negative charge (Miro and Bo, 2012). This negative charge is reduced through the complexation of the templating sodium ions in the interior of the UPOM. Furthermore, Nyman et al. (2011) shows that cesium can exit through the pentagonal window of U 28 in the aqueous phase, suggesting that the TRU elements, which are smaller than cesium, may be capable of entering a UPOM through these windows in an exchange reaction. Under this project, we focused on hafnium, neptunium, and plutonium interactions with UPOMs.

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗
DOE OSTI2025

Impact of Irradiation on Microstructure and Mechanical Properties of Materials Produced by Advanced Manufacturing

Advanced non-light water reactor designs, known as Generation IV (Gen IV) reactors, typically operate at higher temperatures and under more extreme radiation conditions than conventional light water reactors. A critical aspect of the successful deployment and advancement of Gen IV reactor designs is the selection of appropriate structural materials for specific applications, which necessitates the timely development of new materials and manufacturing processes. Advanced manufacturing (AM) offers numerous opportunities for innovative designs, enabling the production of high-performance components with potentially shorter development cycles compared to traditional manufacturing methods. However, a significant challenge in deploying AM technologies in the nuclear energy sector is the current lack of data on the irradiation performance of AM-produced components. This presentation will discuss neutron and ion irradiation results of AM materials, including stainless steel 316L, Grade 91, SA508, Inconel 718, and Inconel 625 materials. The materials were manufactured by AM, such as Powder Metallurgy Hot Isostatic Pressing (PM HIP), Laser Powder Bed Fusion (LPBF) and Directed Energy Deposition (DED). The effects of neutron irradiation on microstructure (e.g., dislocations, loops, and nanoclusters), tensile properties (e.g., strength and ductility), and ion irradiation on Irradiation-Assisted Stress Corrosion Cracking (IASCC) will be explored. Results are collected from several projects supported by the Nuclear Science User Facilities (NSUF) program.

36 - MATERIALS SCIENCE↗
DOE OSTI2024

Metal Doping Regulates Electrocatalysts Restructuring During Oxygen Evolution Reaction

High-efficiency and low-cost catalysts for oxygen evolution reaction (OER) are critical for electrochemical water splitting to generate hydrogen, which is a clean fuel for sustainable energy conversion and storage. Among the emerging OER catalysts, transition metal dichalcogenides have exhibited superior activity compared to commercial standards such as RuO 2 , but inferior stability due to uncontrolled restructuring with OER. Here, in this study, we create bimetallic sulfide catalysts by adapting the atomic ratio of Ni and Co in Co x Ni 1-x S y electrocatalysts to investigate the intricate restructuring processes. Surface-sensitive X-ray photoelectron spectroscopy and bulk-sensitive X-ray absorption spectroscopy confirmed the favorable restructuring of transition metal sulfide material following OER processes. Our results indicate that a small amount of Ni substitution can reshape the Co local electronic structure, which regulates the restructuring process to optimize the balance between OER activity and stability. This work represents a significant advancement in the development of efficient and noble metal-free OER electrocatalysts through a doping-regulated restructuring approach.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Isolation and Structural Elucidation of 15–Nuclear Copper Dihydride Clusters: An Intermediate in the Formation of a Two–Electron Copper Superatom

Highly reactive copper-dihydride clusters, [Cu 15 (H) 2 (S 2 CNR 2 ) 6 (C 2 Ph) 6 ](PF 6 ) {R = n Bu (1 H ), n Pr (2 H ), i Bu (3 H )}, are isolated during the reaction of [Cu 28 H 15 {S 2 CN n Bu 2 } 12 ](PF 6 ) with ten equivalents of phenylacetylene. They are found to be intermediates in the formation of the earlier reported two-electron superatom [Cu 13 (S 2 CNR 2 ) 6 (C 2 Ph) 4 ] + . Better yields are obtained by reacting dithiocarbamate sodium salts, [Cu(CH 3 CN) 4 ](PF 6 ), BH 4 – and phenylacetylene. The presence of two hydrides in the isolated clusters is confirmed by the synthesis and characterization of its deuteride analogue [Cu 15 (D) 2 (S 2 CNR 2 ) 6 (C 2 Ph) 6 ] + , and a single-crystal neutron structure of 2 H . Structural characterization of 1 H reveals a new bicapped icosahedral copper(I) cage encapsulating a linear copper dihydride (CuH 2 ) – unit. In conclusion, reaction of 3 H with Au(I) salts yields a highly luminescent [AuCu 12 (S 2 CNiBu 2 ) 6 (C 2 Ph) 4 ] + cluster.

77 NANOSCIENCE AND NANOTECHNOLOGY↗
DOE OSTI2021

Probing Active Sites in Cu x Pd y Cluster Catalysts by Machine-Learning-Assisted X-ray Absorption Spectroscopy

Size-selected clusters are important model catalysts because of their narrow size and compositional distributions, as well as enhanced activity and selectivity in many reactions. Still, their structure-activity relationships are, in general, elusive. The main reason is the difficulty in identifying and quantitatively characterizing the catalytic active site in the clusters when it is confined within subnanometric dimensions and under the continuous structural changes the clusters can undergo in reaction conditions. Using machine learning approaches for analysis of the operando X-ray absorption near-edge structure spectra, we obtained accurate speciation of the Cu x Pd y cluster types during the propane oxidation reaction and the structural information about each type. As a result, we elucidated the information about active species and relative roles of Cu and Pd in the clusters.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Density Functional Tight Binding Insights into Plasmonic Silver–Platinum Nanoparticles and Alloys for Enhanced Photocatalysis

Developing accurate and efficient Slater-Koster (SK) tight-binding parameter sets is essential for quantum plasmonic studies of alloyed metal nanoparticles, as conventional time dependent density functional theory (TD-DFT) calculations are computationally prohibitive for larger clusters. In this work, we develop and validate density functional tight binding (DFTB) parameter sets for both ground state (GS-SK) and excited state (ES-SK) calculations to study the structural, electronic, and optical properties of silver (Ag), platinum (Pt), and Ag–Pt nanoalloys. Our investigation of the ground state properties demonstrates that the GS-SK parameters enable DFTB to closely reproduce the electronic structures of platinum clusters with diverse sizes and geometries – showing qualitative agreement with DFT for density of states (DOS) profiles and energy levels. The ES-SK parameters accurately describe excited-state properties compared to TD-DFT reference calculations, including the broad, featureless absorption profiles of Pt that are dominated by interband transitions. Using the ES-SK parameters within a real-time TD-DFTB framework, we compute size-dependent optical absorption spectra of Ag, Pt and Ag-Pt nanocubes containing up to 1099 atoms (size ∼4.18 nm). A detailed study of Ag–Pt and Pt-Ag core–shell nanoparticles shows quenching of the Ag plasmon resonance even at monolayer coverage for Ag-Pt, but not for Pt-Ag. We also show how to define submonolayer Ag-core Pt-shell cubic structures that have similar optical properties to those generated experimentally for much larger particles, which offers potential for describing plasmon-enhanced photocatalysis. Collectively, the GS-SK and ES-SK parameter sets provide an accurate, computationally efficient approach for modeling the complex optical and electronic behavior of noble–transition metal nanostructures and their alloys.

SPR↗
DOE OSTI2020

Atomistic Explanation of the Dramatically Improved Oxygen Reduction Reaction of Jagged Platinum Nanowires, 50 Times Better than Pt

Pt is the best catalyst for the oxygen reduction reactions (ORRs), but it is far too slow. Huang and co-workers showed that dealloying 5 nm Ni 7 Pt 3 nanowires (NW) led to 2 nm pure Pt jagged NW (J-PtNW) with ORRs 50 times faster than Pt/C. They suggested that the undercoordinated surface Pt atoms, mechanical strain, and high electrochemically active surface area (ECSA) are the main contributors. We report here multiscale atomic simulations that further explain this remarkably accelerated ORR activity from an atomistic perspective. We used the ReaxFF reactive force field to convert the 5 nm Ni 7 Pt 3 NW to the jagged 2 nm NW. We applied quantum mechanics to find that 14.4% of the surface sites are barrierless for O ads + H 2 O ads → 2OH ads , the rate-determining step (RDS). The reason is that the concave nature of many surface sites pushes the OH bond of the H 2 O ads close to the O ads , leading to a dramatically reduced barrier. We used this observation to predict the performance improvement of the J-PtNW relative to Pt (111). Assuming every surface site reacts independently with this predicted rate leads to a 212-fold enhancement at 298.15 K, compared to 50 times experimentally. The atomic structures of the active sites provide insights for designing high-performance electrocatalysts for ORR.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Functional lipid pairs as building blocks of phase-separated membranes

Biological membranes exhibit a great deal of compositional and phase heterogeneity due to hundreds of chemically distinct components. As a result, phase separation processes in cell membranes are extremely difficult to study, especially at the molecular level. It is currently believed that the lateral membrane heterogeneity and the formation of domains, or rafts, are driven by lipid–lipid and lipid–protein interactions. Nevertheless, the underlying mechanisms regulating membrane heterogeneity remain poorly understood. In the present work, we combine inelastic X-ray scattering with molecular dynamics simulations to provide direct evidence for the existence of strongly coupled transient lipid pairs. These lipid pairs manifest themselves experimentally through optical vibrational (a.k.a. phononic) modes observed in binary (1,2-dipalmitoyl- sn -glycero-3-phosphocholine [DPPC]–cholesterol) and ternary (DPPC–1,2-dioleoyl- sn -glycero-3-phosphocholine/1-palmitoyl-2-oleoyl-glycero-3-phosphocholine [DOPC/POPC]–cholesterol) systems. The existence of a phononic gap in these vibrational modes is a direct result of the finite size of patches formed by these lipid pairs. The observation of lipid pairs provides a spatial (subnanometer) and temporal (subnanosecond) window into the lipid–lipid interactions in complex mixtures of saturated/unsaturated lipids and cholesterol. Our findings represent a step toward understanding the lateral organization and dynamics of membrane domains using a well-validated probe with a high spatial and temporal resolution.

60 APPLIED LIFE SCIENCES↗
DOE OSTI2020

Convenient analytical formula for cluster mean diameter and diameter dispersion after nucleation burst

Here, we propose an alternative method of estimating the mean diameter and dispersion of clusters of particles, formed in a cooling gas, right after the nucleation stage. Using a moment model developed by Friedlander [S. K. Friedlander, Ann. N. Y. Acad. Sci. 404, 354 (1983)], we derive an analytic relationship for both cluster mean diameter and diameter dispersion as a function of two of the characteristic times of the system: the cooling time and the primary constituents collision time. These formulas can be used to predict diameter and dispersion variation with process parameters, such as the initial primary constituents' concentration or cooling rate. It is also possible to use them as an input to the coagulation stage, without the need to compute complex cluster generation during the nucleation burst. We compared our results with a nodal code (NGDE) and got excellent agreement.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2021

X-ray spectroscopic identification of strain and structure-based resonances in a series of saturated carbon-cage molecules: Adamantane, twistane, octahedrane, and cubane

Novel nanocarbons such as fullerenes, nanotubes, graphene, and nanodiamond reside at the cutting edge of nanoscience and technology. Along with chemical functionalization, geometric constraints (such as extreme curvature in nanotubes or defects within or at the surfaces of diamond nanoparticles) significantly alter the electronic states of the nanocarbon material. Understanding the effects of steric strain on the electronic structure is critical to developing nanoelectronic applications based on these materials. This paper presents a fundamental study of how strain affects the electronic structure in a benchmark series of some fundamental saturated carbon cage compounds. Adamantane, C10H16, the smallest diamondoid and arguably the smallest nanodiamond crystallite, has carbon atoms essentially commensurate with diamond lattice positions and possesses by far the least molecular strain of this series. Twistane also is a C10H16 isomer but the fixed cyclohexane twist conformation of the central ring introduces additional strain into the cage. Octahedrane [(CH)12] and cubane [(CH)8] are considerably more strained, culminating in cubane where carbon–carbon bonds lie either parallel or orthogonal to one another. Using gas-phase near-edge x-ray absorption fine structure spectroscopy to probe the unoccupied electronic states, we observe two major progressions across this series. First, a broad C–C σ* resonance in the absorption splits into two more narrow and intense resonances with increasing strain. Second, the first manifold of states previously associated with tertiary C–H σ* in the diamondoid series appears to broaden and shift to lower energy. This feature is more than twice as intense in cubane than in octahedrane, even though these two molecules have only tertiary carbons, with the chemical formula (CH)x. The spectral differences are entirely due to the shape of the molecules; in particular, in cubane, the features arise from a high degree of p-p interaction between parallel C–C bonds. In contrast to the conventional wisdom that near-edge x-ray absorption is primarily an atomically localized spectroscopy, molecular shape and associated strain lead to the dominant features in spectra acquired from this fundamental series of carbon cage structures.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Dissolution of poorly soluble uranyl phosphate phases in the Metaautunite Subgroup under uranyl peroxide cage cluster forming conditions

Uranyl phosphate minerals are widespread in uranium deposits and usually exhibit very low solubility in aqueous systems. Uranyl phosphates of the autunite group and metaautunite subgroup impact the mobility of uranium in the environment and have inspired groundwater remediation strategies that emphasize their low solubility. The importance of soluble uranium-bearing macro-anions, including nanoscale uranyl peroxide cage clusters, is largely unexplored relative to solubilization of normally low-solubility uranium minerals. Eight synthetic analogs of metaautunite subgroup minerals have been prepared and placed in various alkaline aqueous solutions containing hydrogen peroxide and tetraethylammonium hydroxide. Each uranyl phosphate studied has a topologically identical anionic sheet of uranyl square bipyramids and phosphate tetrahedra combined with various cations (Li + , Na + , K + , Rb + , Cs + , Mg 2+ , Ca 2+ , Ba 2+ ) and water in the interlayer. Uranyl peroxides formed under many of the experimental conditions examined, including solid studtite [(UO 2 )(O 2 )(H 2 O) 2 ](H 2 O) 2 and soluble uranyl peroxide cage clusters containing as many as 28 uranyl ions. Uranyl phosphate solids in contact with solutions in which uranyl peroxide cage clusters formed dissolved extensively or completely. The greatest dissolution of uranyl phosphates occurred in systems that contained cations with larger hydrated radii, Li + and Na + . The details of the uranium speciation in solution depended on the pH and counter cations provided from the interlayers of the uranyl phosphate solids.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗