SEARCH · Engineering Papers
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
WaterTAP is a new open source library of water-specific models built on the IDAES Integrated Platform to support the design and optimization of integrated water treatment systems, improve existing systems and enable the analysis of new designs incorporating emerging technologies. WaterTAP enables advanced modeling and optimization for: conceptual and multiscale design, dynamics and model predictive control of water systems and networks.
All electric vertical take-off and landing vehicles (eVTOL) for urban air mobility (UAM) concepts face numerous challenging technical barriers before their introduction into the consumer marketplace. The most challenging of these technical barriers to overcome is developing an energy storage system capable of meeting the rigorous aerospace safety and performance criteria1. The performance metrics for eVTOL craft, such as specific energy, specific power, and safety, exceed those of electric automobiles by a factor of two to four. Current state-of-the-art (SOA) lithium-ion batteries are incapable of meeting the key performance criteria of energy and safety for eVTOL. Therefore, next generation advanced chemistries and designs must be developed to meet required performance metrics for electric aviation2. Beyond lithium-ion chemistries, such as lithium-sulfur, show promise in their high energy, while limitations exist in their power and cyclability due to low electrical conductivity and high intermediate solubility in organic liquid electrolytes. Several strategies to overcome the low electrical conductivity involve the use of selenium as a dopant in the active sulfur material, along with the incorporation of 2-dimensional electron-conducting holey-graphene to improve the composite cathodes electronic conductivity. Furthermore, combining this chemistry with a solid-electrolyte avoids the components’ dissolution issues3. However, the development of composite solid-state cathodes is non-trivial as several components must be intimately mixed so that the active component has sufficient access to both electrons and lithium ions to undergo full electrochemical conversion. Mathematical modeling of battery components can assist experimental design through a robust and rigorous combination of computational modeling techniques covering multiple length scales. The objective is to leverage modern computational materials methods combined with battery multiphysics tools to develop radically advanced compatible cathode and electrolyte materials, build and test solid state lithium-sulfur cells and packs. A NASA-based cross-organizational team of high-powered experts combined integrated computational predictive modeling, fundamental chemistry analysis, advanced material science, and battery cell development to tackle this very challenging, multidisciplinary problem. This presentation will show a multiscale computational modeling approach that has produced a novel particle dynamics method called Solid Electrolyte Sphere Approximation Model (SESAM). SESAM modeling targets the 1-10 µm scale structures and provides electromechanical and grain interactions for predictive design guidelines for the manufacturing of solid-state components. Parameters such as particle size and volume fraction of the constituent materials were modeled and experimentally fabricated to optimize electrochemical performance through improved microstructure design. Experimental feedback was provided through ionic and electronic conductivity assessment and structural analysis of developed materials and cell components.
The performance of lithium-ion batteries is intimately linked to both the structure and the morphology of the cathode material, which in turn is critically linked to the synthesis conditions. However, few studies focus on understanding synthesis, especially during the coprecipitation of metal oxide precursors, a process that largely determines the final morphology of the material. In this paper, we go beyond the typical equilibrium particle shape analysis conducted in the literature and incorporate kinetic aspects of morphology evolution. We perform these studies using controlled synthesis on a well-defined metal salt system (MnCO 3 ) combined with multiscale simulations and high-resolution microscopy. Results show that with increasing metal concentration, the particles transition from rhombohedral to cubic to spherical shapes. Computational analysis using density functional theory (DFT) reveals that rhombohedral shaped particles evolve under equilibrium conditions. Phase field techniques indicate that at higher metal concentrations, fast growth kinetics of the precipitates result in the transition to cubic and, subsequently, spherical shapes, accompanied by a decrease in particle size. This study, while limited to the one metal salt system, provides an approach to shed light on the synthesis process of mixed transition metal salts, gradient materials, and other cathode materials of interest to the battery community.
Wavelet analysis of DMSP SSM/I (Special Sensor Microwave/Imager) 85 GHz and 37 GHz radiance data, SMMR (Scanning Multichannel Microwave Radiometer) 37 GHz, and NSCAT (NASA Scatterometer) 13.9 GHZ data can be used to obtain daily sea ice drift information for both the northern and southern polar regions. The derived maps of sea ice drift provide both improved spatial coverage over the existing array of Arctic Ocean buoys and better temporal resolution over techniques utilizing data from satellite synthetic aperture radars (SAR). Examples of derived ice-drift maps in the Arctic illustrate large-scale circulation reversals within a period of a couple weeks. Comparisons with ice displacements derived from buoys show good quantitative agreement. NASA Scatterometer (NSCAT) 13.9 GHZ data have been also used for wavelet analysis to derive sea-ice drift. First, the 40' incidence-angle, sigma-zero (surface roughness) daily map of whole Arctic region with 25 km of pixel size from satellite's 600 km swath has been constructed. Then, the similar wavelet transform procedure to SSM/I data can be applied. Various scales of wavelet transform and threshold have been tested. By overlaying , neighbor filtering, and block-averaging the results of multiscale wavelet transforms, the final sea ice drift vectors are much smooth and representative to the sea ice motion. This wavelet analysis procedure is robust and can make a major contribution to the understanding of ice motion over large areas at relatively high temporal resolutions. The results of wavelet analysis of SSM/I and NSCAT images and buoy data can be merged by some data fusion techniques and will help to improve our current knowledge of sea ice drift and related processes through the data assimilation of ocean-ice numerical model.
Woven, ablative thermal protection system (TPS) materials provide a robust option for aggressive (re)entries and thus have been baselined for the upcoming Mars Sample Return (MSR) mission's Earth Entry System (EES). The reliability requirements for MSR-EES necessitate understanding of material property variability, which could be significant given the complex structure and anisotropic nature of properties in TPS weaves, as well as the response to potential impact with micrometeoroids or orbital debris during the EES re-entry. The TPS Certification by Analysis effort within the Entry Systems Modeling project seeks to provide computational models and analyses that support the certification against such material-based risks. For the present talk, focus will be given to the characterization of baseline woven TPS material properties and mechanical failure limits, which entails (1) use of computational techniques (e.g., machine learning) to interpret computed tomography images of the weave to generate representative structural models and (2) application of multiscale material modeling approaches to characterize thermomechanical and failure properties.
Silicon carbide fiber and silicon carbide matrix (SiC f /SiC m ) tubes produced through the chemical vapor infiltration process have become a candidate cladding material in nuclear applications. The performance of this composite is influenced by many variables such as braiding angle, porosity, material properties, etc., which vary over a range of values due to the inherent fluctuations in the manufacturing process. In this study, the variability in elastic constants of SiC f /SiC m composite has been quantified through multiscale finite element (FE) simulations, variable screening, and high-fidelity surrogate modeling. The key variables dominantly affecting the elastic constants of SiC f /SiC m tubes were identified using global sensitivity analysis. A surrogate to the high-fidelity FE-based model was used in Monte Carlo simulations to generate a hundred thousand samples from which the uncertainty in elastic constants was assessed. It turned out that the coefficient of variation was less than 10%.
We simulate the Madden-Julian oscillation (MJO) over an aquaplanet with uniform surface temperature using the multiscale modeling framework (MMF) configuration of the Energy Exascale Earth System Model (E3SM-MMF). The model produces MJO-like features that have a similar spatial structure and propagation behavior to the observed MJO. To explore the processes involved in the propagation and maintenance of these MJO-like features, we perform a vertically resolved moist static energy (MSE) analysis for the MJO (Yao et al., 2022, https://doi.org/10.1175/jas-d-20-0254.1). Unlike the column-integrated MSE analysis, our method emphasizes the local production of MSE variance and quantifies how individual physical processes amplify and propagate the MJO's characteristic vertical structure. We find that radiation, convection, and boundary layer (BL) processes all contribute to maintaining the MJO, balanced by the large-scale MSE transport. Furthermore, large-scale dynamics, convection, and BL processes all contribute to the propagation of the MJO, while radiation slows the propagation. Additionally, we perform mechanism-denial experiments to examine the role of radiation and associated feedbacks in simulating the MJO. We find that the MJO can still self-emerge and maintain its characteristic structures without radiative feedbacks. This study highlights the role of convective MSE transport in the MJO dynamics, which was overlooked in the column-integrated MSE analysis.
As magnetic confinement fusion energy gains traction internationally to enable abundant energy production, designing components for fusion systems is a pressing challenge. During the planned lifetime of a fusion device, components evolve in extreme environments and must withstand large, repeated thermal loads and bombardment by 14 MeV neutrons, plasma ions, and neutral particles (deuterium, tritium, and helium), corrosive conditions, etc. All these physical processes take place simultaneously, interact in intricate ways, and impose important constraints that can affect performance. Experimental data is rare and costly to obtain, making design particularly challenging. Predictive computational frameworks must be an integral part of an accelerated and cost-effective design process by modeling fusion system performance in simulated environments. To better understand component degradation and operational impacts on their performance, the Software for Advanced Large-scale Analysis of MAgnetic confinement for Numerical Design, Engineering & Research (SALAMANDER) is designed as an open-source, fully integrated, multiphysics, multiscale, NQA-1 compliant framework facilitating 3D, high-fidelity fusion system modeling. To that end, SALAMANDER is a MOOSE-based framework, and therefore leverages MOOSE upstream libraries such as PETSc and libMesh to deliver sophisticated finite element, finite volume, and nonlinear solver technology for fusion energy simulations. SALAMANDER couples MOOSE physics module capabilities—such as thermal hydraulics, heat conduction, Navier-Stokes, and thermomechanics—with tritium transport via TMAP8, neutronics via Cardinal, and nascent particle-in-cell capabilities. Direct simulation Monte Carlo methods will be used to address neutral transport near the walls. By coupling all these physics in an integrated application, SALAMANDER will enable high-fidelity modeling of irradiation levels and plasma exposure conditions of plasma facing components and their impact on heat and tritium distributions, as well as the resulting mechanical constraints experienced by the plasma facing components and performance of blanket systems. Furthermore, SALAMANDER will be particularly suited for engineering studies thanks to the stochastic tool module readily available in MOOSE, allowing for extended uncertainty quantification and risk analysis studies. It is also able to use computer-aided design (CAD) meshes to model complex geometries, which is indispensable for fusion systems. SALAMANDER therefore supports design, safety, engineering, and research projects for magnetic confinement fusion systems
Increasing landscape heterogeneity (composition and configuration) can enhance natural enemy populations and support pest suppression in agricultural landscapes. Using a network-based data mining approach, we examined independent gradients of landscape composition and configuration at six spatial scales that were associated with pest suppression services measured at 32 sites in Michigan and Wisconsin, USA. We compared the relative effects of landscape composition and configuration across scales with those of local crop type (corn or grassland). We found that multiple gradients of configurational heterogeneity were independent of composition and strongly associated with pest suppression, with different configuration metrics being predictive of pest suppression depending on the spatial scales and regions considered. Landscapes that were more configurationally heterogeneous at smaller spatial scales consistently supported higher pest suppression. In Michigan, pest suppression increased in landscapes with high edge contrast between annual crops and surrounding habitats and high edge density of grassland within 250-500 m radii. In Wisconsin, pest suppression increased with large core area of grassland and high field density within a 250 m radius. The main compositional effect we found was a positive relationship between grassland cover and pest suppression occurring at larger spatial scales (1000-1500 m) and occurring in Wisconsin but not in Michigan. Our findings demonstrate that effects of landscape composition and configuration on pest suppression differ across spatial scales and vary regionally. The network-based data mining techniques used here could be useful for disentangling intercorrelated landscape metrics in a variety of other contexts in landscape ecology.
The nature of the 3-s ultralow frequency (ULF) wave in the Earth's foreshock region and the associated wave-particle interaction are not yet well understood. In this work, we investigate the 3-s ULF waves using Magnetospheric Multiscale (MMS) observations. By combining the plasma rest frame wave properties obtained from multiple methods with the instability analysis based on the velocity distribution in the linear wave stage, the ULF wave is determined to be due to the ion/ion nonresonant mode instability. The interaction between the wave and ions is analyzed using the phase relationship between the transverse wave fields and ion velocities and using the longitudinal momentum equation. During the stage when ULF waves have sinusoidal waveforms up to |dB|/|B 0 | ~ 3, where dB is the wave magnetic field and B0 is the background magnetic field, the wave electric fields perpendicular to B 0 do negative work to solar wind ions; along B 0 , a longitudinal electric field develops, but the V × B force is stronger and leads to solar wind ion deceleration. During the same wave stage, the backstreaming beam ions gain energy from the transverse wave fields and get deceleration along B 0 by the longitudinal electric field. The ULF wave leads to electron heating, preferentially in the direction perpendicular to the local magnetic field. Secondary waves are generated within the ULF waveforms, including whistler waves near half of the electron cyclotron frequency, high-frequency electrostatic waves, and magnetosonic whistler waves. The work improves the understanding of the nature of 3-s ULF waves and the associated wave-particle interaction.
We investigate the energy conversion and partition in the asymmetric reconnection diffusion region using two-dimensional particle-in-cell simulations and Magnetosphere Multiscale (MMS) mission observations. Under an upstream condition with equal temperatures in the two inflow regions, the simulation analysis indicates that the energy partition between ions and electrons depends on the distance from the X-line. Within the central electron diffusion region (EDR), nearly all dissipated electromagnetic field energies are converted to electrons. From the EDR to the ion diffusion region (IDR) scales, the rate of the electron energy gain decreases to be lower than that of ions. A magnetopause reconnection event inside the IDR observed by MMS shows comparable ion and electron energy gains, consistent with the simulation result in the transition region from EDR to IDR. At the EDR scale, the electron energization is mainly by the reconnection electric field (E(sub r)); in-plane electric fields (E(sub xz)) provide additional positive contributions near the X-line and do negative work on electrons beyond the EDR. The guide field reduces the electron energization by both E(sub r) and E(sub xz) in the EDR. For ion energization, E(sub r) and E(sub xz) have comparable contributions near the time of the peak reconnection rate, while E(sub xz) dominants at later time. At the IDR scale, the guide field causes asymmetry in the amount of the energy gain and energization mechanisms between two exhausts but does not have significant effects on energy partition. Our study advances understanding of ion and electron energization in asymmetric reconnect IDRs.
Shock parameters at Earth’s bow shock, in rare instances, can approach the Mach numbers predicted at astrophysical shocks and supernova remnants. We present our analysis of a high Alfv ́en Mach number (MA= 27) shock, by utilizing multipoint measurements from the Magnetospheric Multiscale (MMS) spacecraft during a crossing of Earth’s quasi-perpendicular bow shock. We find that the shock dynamics are mostly driven by reflected ions, perturbations that they generate, and nonlinear amplification of the perturbations. Our analyses indicate that reflected ions create modest magnetic enhancements upstream of the shock front which evolve in a nonlinear manner as they traverse the shock foot. They can transform into proto-shocks that propagate at small angles to the magnetic field and towards the bow shock. The nonstationary bow shock shows signatures of both reformation and surface ripples. Our observations indicate that although shock reformation occurs, the main shock layer never disappears. These observations are at high plasmaβ, a parameter regime which has not been well explored by numerical models.
In this study, we propose a concept for localizing and mitigating greenhouse gases and other emissions from areas of various sizes, using a multiscale, airborne localization fleet, supported by information from satellites. Our objective is a rapidly implementable capability for the reduction of atmospheric methane by empowering the communities in proximity to emissions to actively contribute to methane mitigation via fleet operations by local governments, first responders, and individuals . Fully autonomous operations are economically desirable and technically feasible now. However, the development of regulations for autonomous operations is in early stages. Since rapid impact is critical to reducing emissions, the concept starts with remotely controlled vehicles. As regulations for autonomous operations reach maturity, the concept can be easily transitioned from the remotely piloted to autonomous mode. We report on a preliminary system analysis of the concept. Localization of methane emissions from the Permian Basin oil and gas production site serves as the design reference mission; however, the airborne concept is applicable to a broad range of use cases, and we describe several in this analysis. We consider leveraging satellite and ground-based resources within the airborne concept of operations. The study analyses uninhabited aerial system localization operations under the most conservative assumptions on resources and available information. Even under these assumptions, the concept is shown to be viable for local community operations.
In FY23, we performed atomic-scale simulations and developed analysis tools to understand the dynamic behaviors of Li ions and cation/anion components and predict mechanical properties in a new class of Li-ion solid electrolytes (SEs) developed by TRINA. Specifically, we revealed the transport characteristics of Li ions in anion sublattice, rotational dynamics of anion and cation components, and the effect of cation and anion on Li transport as well as interactions between cation and anions. The results imply that the transport characteristics in these soft materials may be affected by processing conditions significantly, which will offer the necessary insights to optimize these future SEs and accelerate the deployment of practical and easily processable Solid-state batteries (SSBs).
Integrated Computational Materials Engineering (ICME) has recently received widespread attention due to its promises in reducing dependence on physical testing for engineering design by relying on simulation, reducing both time and cost to market for various applications. ICME however requires validated multiscale material models, which heavily depend on available test data with full material and test pedigree, including material processing, test and measurement equipment, raw data collection, and analysis methodology and results that is findable and usable, along with integrated, efficient toolsets for effectively passing information across various length and time scales across such models. At the NASA Glenn Research Center under the Transformational Tools and Technologies Project, significant recent efforts have been directed towards establishing the required cyberinfrastructure to enable optimized ICME processes and the design of “fit-for-purpose” materials to achieve the goals outlined in the NASA Vision 2040 report. Such efforts include development of multiscale physics-based material models, which can be used to train highly efficient surrogate machine learning models, development of best practices and infrastructure for effective, traceable materials information management, and development of toolsets that integrate with physics-based codes, machine learning models, and an information management system to enable high throughput of materials data collection and analysis, establishment of digital twins and the digital thread, and automation of the ICME design process for material optimization.
Modeling of packed-bed microwave reactors relies on an accurate representation of particle size, shape, and distribution within the bed, as well as the particles' dielectric properties. The measured permittivity of microwave susceptors (powders or structured materials) depends on the geometric features of the particles and the porosity of the bed, as well as the specific form factor of a structured material. These are effective properties and cannot be used to analyze other reactor configurations unless the geometric effects are removed. Therefore, we introduce a methodology for extracting the intrinsic particle permittivity from experimentally measured effective permittivity by combining cavity-based measurements with multiscale simulations and machine learning. Further, we develop the first multiscale model of packed-bed microwave reactors that incorporate particle effects (geometric features, random packing, and particle contact). This approach bridges macroscopic observables with mesoscopic physics, enabling analysis of local hotspots, arcing, and contact effects that control reactor performance. Using polymer-based spherical activated carbon (PBSAC) and silicon carbide (SiC) as examples, we demonstrate that the inferred particle permittivity is consistent with independent experimental heating profiles we collect from microwave reactors without adjustable parameters. Finally, this methodology establishes a foundation for predictive, multiscale design of microwave packed-bed reactors that explicitly accounts for particle-scale effects, enabling the estimation of intrinsic permittivity for the first time.
A Land Model Testbed (LMT), designed to provide a computational framework for systematically assessing model fidelity and supporting rapid development of complex multiscale models, offers a general-purpose workflow for conducting large ensemble simulations of multiple land surface models, post-processing large volumes of model output, and evaluating model results. It leverages existing tools for launching model simulations and the International Land Model Benchmarking (ILAMB) package for assessing model fidelity through comparison with best-available observational datasets. Increased complexity and proliferation of uncertain parameters in process representations in land surface models has driven the need for frequent and intensive testing and evaluating of models to quantify uncertainties and optimize parameters such that results are consistent with observations. The LMT described here meets these needs by providing tools to run thousands of ensemble simulations simultaneously and post-process their output files, by automating execution of an enhanced version of ILAMB with site-specific benchmarks and multivariate functional relationships, and by offering ensemble diagnostics and a customizable dashboard for displaying model performance metrics and associated graphics. We envision the LMT capabilities will serve as a foundational computational resource for a proposed user facility focused on terrestrial multiscale model--data integration.
Water imbibition, and the associated oil displacement, is an important process in shale oil reservoirs after hydraulic fracturing and in water-based enhanced oil recovery (EOR). Current techniques for water imbibition measurement are mostly “black-box”-type methods. A more explicit understanding of the water imbibition/oil recovery dynamics and geological controls is in demand. In this paper, a multiscale imaging technique that covers centimeter to nanometer scale (i.e., core to pore scale), integrating neutron radiography, microcomputed tomography (micro-CT), and scanning electron microscope (SEM) is applied to investigate the water imbibition depth and rate and the cause of heterogeneity of imbibition in shale samples. The dynamic processes of water imbibition in the 1-in. (25.4-mm) core sample were explicitly demonstrated, and the imbibition along the matrix and imbibition through microfractures are distinguished through neutron radiography image analysis. The causes of observed imbibition heterogeneity were further investigated through micro-CT and SEM image analysis for 1.5-mm diameter miniplug samples from different laminas of the 1-in. core samples. Imbibition depth and rate were calculated on the basis of image analysis as well. Estimation of oil recovery through water imbibition in shale matrix was performed for an example shale field. Here this innovative and integrated multiscale imaging technique provides a “white/gray-box” method to understand water imbibition and water-oil displacement in shale. The wide span of the length scale (from centimeter to nanometer) of this technique enables a more comprehensive, accurate, and specific understanding of both the core-scale dynamics and pore-scale mechanisms of water imbibition, oil recovery, and matrix-fracture interaction.