Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “molecular doping”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 271 records · Page 15
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

Synthesis of Samarium Nitride Thin Films on Magnesium Oxide (001) Substrates Using Molecular Beam Epitaxy

Rare-earth nitrides are an exciting family of materials with a wide variety of properties desirable for new physics and applications in spintronics and superconducting devices. Among them, samarium nitride is an interesting compound reported to have ferromagnetic behavior coupled with the potential existence of p-wave superconductivity. Synthesis of high-quality thin films is essential in order to manifest these behaviors and understand the impact that vacancies, structural distortions, and doping can have on these properties. In this study, we report the synthesis of samarium nitride monocrystalline thin films on magnesium oxide (001) substrates with a chromium nitride capping layer using molecular beam epitaxy (MBE). We observed a high-quality monocrystalline SmN film with matching orientation to the substrate, then optimized the growth temperature. Despite the initial 2 nm of growth showing formation of a potential samarium oxide layer, the subsequent layers showed high-quality SmN, with semiconducting behavior revealed by an increase in resistivity with decreasing temperature. These promising results highlight the importance of studying diverse heteroepitaxial schemes and open the door for integration of rare-earth nitrides and transition metal nitrides for future spintronic devices.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Organic Hole Transport Material Ionization Potential Dictates Diffusion Kinetics of Iodine Species in Halide Perovskite Devices

Iodine-containing volatiles are major degradation products of halide perovskite materials under irradiation, yet iodine diffusion kinetics into and throughout organic hole transport materials (HTMs) and consequent reactions are largely unexplored. In this work, we modify the Ca:O 2 corrosion test to Ag:I 2 to quantify I 2 transmission rates through common organic HTMs. We observe I 2 permeability to inversely correlate with HTM ionization energy, or the highest occupied molecular orbital (HOMO) energy. Tracking electronic conductance during exposure to I 2 confirms shallow HOMO HTMs are strongly oxidized (i.e., doped), leading to substantial I 2 uptake and increased transmission rates. Finally, relationships between HOMO level, doping, and transmission rate are maintained when methylammonium lead triiodide (MAPbI 3 ) photolysis products are the only source of iodine. While HTM energetics influence the initial performance of halide perovskite devices by selective charge extraction, our results further suggest they will affect device stability; deeper HOMO energy HTMs will suppress iodine migration and associated degradation mechanisms.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

AlN quasi-vertical Schottky barrier diode on AlN bulk substrate using Al 0.9 Ga 0.1 N current spreading layer

Abstract An aluminum nitride (AlN) quasi-vertical Schottky barrier diode (SBD) was fabricated on an AlN bulk substrate. An undoped AlN layer, a Si-doped Al 0.9 Ga 0.1 N current spreading layer and an AlN buffer layer were grown by plasma-enhanced molecular beam epitaxy. The epitaxial AlN layer was etched down to the n-Al 0.9 Ga 0.1 N layer to form an Ohmic contact. Ni/Au and V/Al/Ni/Au were deposited on the top AlN layer as Schottky contacts and on the exposed n-Al 0.9 Ga 0.1 N layer as Ohmic contacts, respectively. The Ohmic characteristics on the n-Al 0.9 Ga 0.1 N layer, capacitance–voltage ( C – V ) and current–voltage ( I – V ) characteristics of the AlN SBD were investigated.

Physics↗
DOE OSTI2019

Defects in C d 3 A s 2 epilayers via molecular beam epitaxy and strategies for reducing them

Molecular beam epitaxy offers an exciting avenue for investigating the behavior of the topological semimetal Cd 3 As 2 , by providing routes for doping, alloying, strain engineering, and heterostructure formation. To date, however, minimal exploration has been devoted to the impact of defects that are incorporated into epilayers due to constraints imposed by the substrate and narrow growth window. Here, we use a combination of lattice-matched Zn x Cd 1-x Te buffer layers, miscut substrates, and broadband illumination to study how dislocations, twins, and point defects influence the electron mobility of Cd 3 As 2 . In conclusion, a combination of defect suppression approaches produces Cd 3 As 2 epilayers with electron mobilities upwards of 15000 cm 2 /Vs at room temperature.

14 SOLAR ENERGY↗
DOE OSTI2020

Spectroscopic study of GdVO{sub 4} : Yb + Er crystals

GdVO{sub 4} crystals doped with different erbium and ytterbium concentrations have been grown in order to study their spectroscopic and kinetic properties and identify the nature of active centres in them. Their polarised transmission and luminescence spectra have been used to construct energy level diagrams of the Er{sup 3+} ion. The lifetime of the lower level of the {sup 4}I{sub 11/2} excited-state multiplet has been shown to decrease markedly with increasing ytterbium concentration. Inequivalent erbium centres have been observed to form in the crystals with increasing ytterbium concentration. (paper)

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2026

Chirality transfer from chiral perovskite to molecular dopants via charge transfer states

Chiral perovskites are semiconductors with broken mirror symmetries. Their photo responses are often constrained in the UV range. In this work, we demonstrate that doping 2,3,5,6-Tetrafluoro-7,7,8,8-tetracyanoquinodimethane in the chiral perovskite matrix introduces a visible light absorption feature through the emerging charge-transfer electronic states. These charge-transfer states exhibits circular dichroism inherited from the chiral host, indicating effective chirality transfer from host to guest component via electronic coupling. Quantum-chemical modeling identifies a strong wave function overlap between an electron and a hole of the guest-host in a closely packed crystal configuration promoting the charge transfer state’s optical activity. We further integrate the doped chiral perovskite film into photodetectors and demonstrate a selective detection of circularly polarized light in both UV and visible regions. Our results suggest a universal approach of introducing visible photo absorption states to the chiral matrix to broaden the optical active range while enhancing the electrical conductivity.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Polarized Photocathodes development for the EIC: Optimizing Spin and Quantum Efficiency

GaAs/GaAsP superlattice photocathodes play a critical role for producing highly polarized electron beams for the Electron-Ion Collider (EIC) at Brookhaven National Laboratory. The electron pre-injector for the EIC requires electron bunches with high bunch charge (1-2 nC) and high polarization, from GaAs-based superlattice photocathode. Herein, we have systematically investigated a range of GaAs/GaAsP superlattice photocathodes fabricated via molecular beam epitaxy (MBE) and metal-organic chemical vapor deposition (MOCVD). Through optimization of pre-cleaning procedures and surface doping conditions, we aim to identify the most promising photocathode configurations for future EIC operations. To enhance the quantum efficiency (QE), a Distributed Bragg Reflector structure is frequently incorporated beneath the superlattice. While this approach effectively increases QE, it also introduces additional complexities that can adversely influence spin polarization and the spectral response at specific laser wavelengths. This note provides an overview of superlattice GaAs development and outlines the EIC team’s ongoing efforts to address related challenges and advance high-performance photocathode development tailored for the EIC. Over five years of multi-institutional collaboration and measurements of about 50 SL-GaAs samples, our analysis presents statistics on samples exhibiting high ESP and high QE. It will help to set the initial ESP requirements for the EIC project.

43 PARTICLE ACCELERATORS↗
NASA NTRS1983

Silicon sheet with molecular beam epitaxy for high efficiency solar cells

The capabilities of the new technique of Molecular Beam Epitaxy (MBE) are applied to the growth of high efficiency silicon solar cells. Because MBE can provide well controlled doping profiles of any desired arbitrary design, including doping profiles of such complexity as built-in surface fields or tandem junction cells, it would appear to be the ideal method for development of high efficiency solar cells. It was proposed that UCLA grow and characterize silicon films and p-n junctions of MBE to determine whether the high crystal quality needed for solar cells could be achieved.

Allen, F. G.↗
NASA NTRS1992

Molecular beam epitaxy engineered III-V semiconductor structures for low-power optically addressed spatial light modulators

Device approaches are investigated for optically addressed SLMs based on molecular-beam epitaxy (MBE) engineered III-V materials and structures. Strong photooptic effects can be achieved in periodically delta-doped multiple-quantum-well structures, but are still insufficient for high-contrast modulation with only single- or double-pass absorption through active layers of practical thickness. The asymmetric Fabry-Perot cavity approach is employed to permit extinction of light due to interference of light reflected from the front and back surfaces of the cavity. This approach is realized with an all-MBE-grown structure consisting of GaAs/AlAs quarter-wave stack reflector grown over the GaAs substrate as the high reflectance mirror and the GaAs surface as the low reflectance mirror. High-contrast modulation is achieved using a low-power InGaAs/GaAs quantum well laser for the control signal.

Larsson, Anders G.↗
NASA NTRS2006

FETs Based on Doped Polyaniline/Polyethylene Oxide Fibers

A family of experimental highly miniaturized field-effect transistors (FETs) is based on exploitation of the electrical properties of nanofibers of polyaniline/ polyethylene oxide (PANi/PEO) doped with camphorsulfonic acid. These polymer-based FETs have the potential for becoming building blocks of relatively inexpensive, low-voltage, highspeed logic circuits that could supplant complementary metal oxide/semiconductor (CMOS) logic circuits. The development of these polymerbased FETs offers advantages over the competing development of FETs based on carbon nanotubes. Whereas it is difficult to control the molecular structures and, hence, the electrical properties of carbon nanotubes, it is easy to tailor the electrical properties of these polymerbased FETs, throughout the range from insulating through semiconducting to metallic, through choices of doping levels and chemical manipulation of polymer side chains. A further advantage of doped PANi/PEO nanofibers is that they can be made to draw very small currents and operate at low voltage levels, and thus are promising for applications in which there are requirements to use many FETs to obtain large computational capabilities while minimizing power demands. Fabrication of an experimental FET in this family begins with the preparation of a substrate as follows: A layer of silicon dioxide between 50 and 200 nm thick is deposited on a highly doped (resistivity 0.01 W.cm) silicon substrate, then gold electrodes/contact stripes are deposited on the oxide. Next, one or more fibers of camphorsulphonic acid-doped PANi/PEO having diameters of the order of 100 nm are electrospun onto the substrate so as to span the gap between the gold electrodes (see Figure 1). Figure 2 depicts measured current-versus-voltage characteristics of the device of Figure 1, showing that saturation channel currents occur at source-todrain potentials that are surprisingly low, relative to those of CMOS FETs. The hole mobility in the depletion regime in this transistor was found to be 1.4 10(exp -4) sq cm/(V.s), while the one-dimensional charge density at zero gate bias was estimated to be approximately one hole per 50 two-ring repeat units of polyaniline, consistent with the rather high channel conductivity (approx. 10(exp -3) S/cm). Reducing or eliminating the PEO content of the fibers is expected to enhance the properties of future versions of this transistor.

Theofylaktos, Noulie↗
DOE OSTI2025

Nanoscale Decoupling of Carrier-Phonon Transport in Carbon Nanotube-Halide Perovskite Heterostructures

In conventional semiconductors, electrical and thermal conductivity are typically coupled, posing a challenge in optimizing both simultaneously. Overcoming this inherent trade-off enables strategies for advancing electronic applications. Herein, a strategy is demonstrated to decouple electrical and thermal conductivity trade-off by creating heterostructures of highly conductive single-walled carbon nanotubes (SWCNTs) coated with low conductivity hybrid perovskites. Coating SWCNTs with methylammonium lead iodide perovskite results in an enhancement in electrical conductivity (408-1266 S cm-1) due to p-type doping followed by a threefold decrease of the in-plane thermal conductivity (3.3-1 W m-1 K-1), compared to pristine SWCNTs. Molecular dynamics simulations uncover phonon boundary scattering at the SWCNT/perovskite interface as well as localization of methylammonium-related and softening of the Pb-I-related phonon modes in methylammonium lead iodide perovskite decreasing the thermal conductivity.

14 SOLAR ENERGY↗
NASA NTRS1991

High-power single-element pseudomorphic InGaAs/GaAs/AlGaAs single quantum well lasers for pumping Er-doped fiber amplifiers

A 980-nm-ridge waveguide pseudomorphic InGaAs/GaAs/AlGaAs single-quantum-well laser with a maximum single-ended output power of 240 mW from a facet-coated device is fabricated from a graded-index separate-confinement heterostructure grown by molecular-beam epitaxy. The laser oscillates in the fundamental spatial mode, allowing 22 percent coupling efficiency into a 1.55-micron single-mode optical fiber. Life testing at an output power of 30 mW per facet from uncoated devices reveals a superior reliability to GaAs/AlGaAs quantum-well lasers but also the need for protective facet coatings for long term reliability at power levels required for pumping Er-doped fiber amplifiers.

Larsson, A.↗
DOE OSTI2025

Microstructural and preliminary optical and microwave characterization of erbium-doped CaMoO 4 thin films

This work explores erbium-doped calcium molybdate (Er:CaMoO4) thin films grown on silicon and yttria stabilized zirconia (YSZ) substrates, as a potential solid state system for C-band (utilizing the ∼1.5 μm Er 3+ 4f–4f transition) quantum emitters for quantum network applications. Through molecular beam epitaxial growth experiments and electron microscopy, X-ray diffraction, and reflection electron diffraction studies, we identify an incorporation limited deposition regime that enables a 1:1 Ca:Mo ratio in the growing film leading to single phase CaMoO 4 formation that can be in situ doped with Er (typically 2–100 ppm). We further show that growth on silicon substrates is single phase but polycrystalline in morphology, while growth on YSZ substrates leads to high-quality epitaxial single crystalline CaMoO 4 films. We perform preliminary optical and microwave characterization on the suspected Y 1 –Z 1 transition of 2 ppm, 200 nm epitaxial Er:CaMoO 4 annealed thin films and extract an optical inhomogeneous linewidth of 9.1(1) GHz, an optical excited state lifetime of 6.7(2) ms, a spectral diffusion-limited homogeneous linewidth of 6.7(4) MHz, and an EPR linewidth of 1.10(2) GHz.

Masiulionis, Ignas [Univ. of Chicago, IL (United S↗
DOE OSTI2020

Experimental and theoretical evidence for hydrogen doping in polymer solution-processed indium gallium oxide

The field-effect electron mobility of aqueous solution-processed indium gallium oxide (IGO) thin-film transistors (TFTs) is significantly enhanced by polyvinyl alcohol (PVA) addition to the precursor solution, a >70-fold increase to 7.9 cm 2 /Vs. To understand the origin of this remarkable phenomenon, microstructure, electronic structure, and charge transport of IGO:PVA film are investigated by a battery of experimental and theoretical techniques, including In K-edge and Ga K-edge extended X-ray absorption fine structure (EXAFS); resonant soft X-ray scattering (R-SoXS); ultraviolet photoelectron spectroscopy (UPS); Fourier transform-infrared (FT-IR) spectroscopy; time-of-flight secondary-ion mass spectrometry (ToF-SIMS); composition-/processing-dependent TFT properties; high-resolution solid-state 1 H, 71 Ga, and 115 In NMR spectroscopy; and discrete Fourier transform (DFT) analysis with ab initio molecular dynamics (MD) liquid-quench simulations. The 71 Ga{ 1 H} rotational-echo double-resonance (REDOR) NMR and other data indicate that PVA achieves optimal H doping with a Ga···H distance of ~3.4 Å and conversion from six- to four-coordinate Ga, which together suppress deep trap defect localization. This reduces metal-oxide polyhedral distortion, thereby increasing the electron mobility. Finally, hydroxyl polymer doping thus offers a pathway for efficient H doping in green solvent-processed metal oxide films and the promise of high-performance, ultra-stable metal oxide semiconductor electronics with simple binary compositions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Unraveling the Nature of Excellent Potassium Storage in Small-Molecule Se@Peapod-Like N-Doped Carbon Nanofibers

The potassium-selenium (K-Se) battery is considered as an alternative solution for stationary energy storage because of abundant resource of K. However, the detailed mechanism of the energy storage process is yet to be unraveled. In this work, the findings in probing the working mechanism of the K-ion storage in Se cathode are reported using both experimental and computational approaches. A flexible K-Se battery is prepared by employing the small-molecule Se embedded in freestanding N -doped porous carbon nanofibers thin film (Se@NPCFs) as cathode. The reaction mechanisms are elucidated by identifying the existence of short-chain molecular Se encapsulated inside the microporous host, which transforms to K 2 Se by a two-step conversion reaction via an "all-solid-state" electrochemical process in the carbonate electrolyte system. Through the whole reaction, the generation of polyselenides (K 2 Se n , 3 ≤ n ≤ 8) is effectively suppressed by electrochemical reaction dominated by Se-2 molecules, thus significantly enhancing the utilization of Se and effecting the voltage platform of the K-Se battery. This work offers a practical pathway to optimize the K-Se battery performance through structure engineering and manipulation of selenium chemistry for the formation of selective species and reveal its internal reaction mechanism in the carbonate electrolyte.

25 ENERGY STORAGE↗
DOE OSTI2021

Resolving Configurational Disorder for Impurities in a Low-Entropy Phase

Hematite (α-Fe 2 O 3 ) exerts a strong control over the transport of minor but critical metals in the environment and is used in multiple industrial applications; the photocatalysis community has explored the properties of hematite nanoparticles over a wide range of transition metal dopants. Nonetheless, simplistic assumptions are used to rationalize the local coordination environment of impurities in hematite. Here, we use ab initio molecular dynamics (AIMD)-guided structural analysis to model the extended X-ray absorption fine structure (EXAFS) of Cu 2+ - and Zn 2+ -doped hematite nanoparticles. Specific defect–impurity associations were identified, and the local coordination environments of Cu and Zn both displayed considerable configurational disorder that, in aggregate, approached Jahn–Teller-like distortion for Cu but, in contrast, maintained hematite-like symmetry for Zn. This study highlights the role of defects in accommodating impurities in a nominally low-entropy phase and the limits to traditional shell-by-shell fitting of EXAFS for dopants/impurities in unprecedented bonding environments.

36 MATERIALS SCIENCE↗
NASA NTRS1989

BIN Diode For Submillimeter Wavelengths

Diode formed by selective doping during epitaxial growth, starting with semi-insulating substrate. Use of high-mobility semiconductors like GaAs extends cutoff frequency. Either molecular-beam epitaxy (MBE) or organometallic chemical-vapor deposition used to form layers of diode. Planar growth process permits subsequent fabrication of arrays of diodes by standard photolithographic techniques, to achieve quasi-optical coupling of submillimeter radiation. Useful for generation of harmonics or heterodyne mixing in receivers for atmospheric and space spectroscopy operating at millimeter and submillimeter wavelengths. Used as frequency doublers or triplers, diodes of new type extend frequency range of present solid-state oscillators.

Maserjian, J.↗
DOE OSTI2023

Monolayer Superconductivity and Tunable Topological Electronic Structure at the Fe(Te,Se)/Bi 2 Te 3 Interface

The interface between 2D topological Dirac states and an s-wave superconductor is expected to support Majorana-bound states (MBS) that can be used for quantum computing applications. Realizing these novel states of matter and their applications requires control over superconductivity and spin-orbit coupling to achieve spin-momentum-locked topological interface states (TIS) which are simultaneously superconducting. While signatures of MBS have been observed in the magnetic vortex cores of bulk FeTe 0.55 Se 0.45 , inhomogeneity and disorder from doping make these signatures unclear and inconsistent between vortices. In this work, superconductivity is reported in monolayer (ML) FeTe 1–y Se y (Fe(Te,Se)) grown on Bi 2 Te 3 by molecular beam epitaxy (MBE). Spin and angle-resolved photoemission spectroscopy (SARPES) directly resolve the interfacial spin and electronic structure of Fe(Te,Se)/Bi 2 Te 3 heterostructures. For y = 0.25, the Fe(Te,Se) electronic structure is found to overlap with the Bi 2 Te 3 TIS and the desired spin-momentum locking is not observed. In contrast, for y = 0.1, reduced inhomogeneity measured by scanning tunneling microscopy (STM) and a smaller Fe(Te,Se) Fermi surface with clear spin-momentum locking in the topological states are found. Hence, it is demonstrated that the Fe(Te,Se)/Bi 2 Te 3 system is a highly tunable platform for realizing MBS where reduced doping can improve characteristics important for Majorana interrogation and potential applications.

36 MATERIALS SCIENCE↗