Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “minimum”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 271 records · Page 15

Cooper-minimum-type structure in proton-induced L{sub 1}- and L{sub 3}-subshell x-ray line intensities of Pd measured with high-resolution x-ray spectroscopy

We report on high-resolution measurements of the L{sub 1}- and L{sub 3}-subshell x-ray lines of Pd induced by 0.5-3.0 MeV proton bombardment. The experimental results for the relative intensities of the L{beta}{sub 3} (L{sub 1}-M{sub 3}), L{beta}{sub 4} (L{sub 1}-M{sub 2}), and L{beta}{sub 6} (L{sub 3}-N{sub 1}) lines are compared to the theoretically predicted values employing L-subshell ionization cross sections calculated within the semiclassical approximation and the energy-loss Coulomb-repulsion perturbed-stationary-state relativistic theory. A structure of the L{sub 1}-subshell cross section at low proton energies generated by the nodal structure of the 2s wave function, analogous to the well-known Cooper minimum in the photoabsorption cross section, has been observed also for the case of charged particle ionization. In addition, the influence of the multiple ionization on the intensity ratio of the two most intense L{sub 1}-subshell x-ray transitions is studied by comparing the proton-induced intensities with the corresponding photoinduced value measured in an experiment employing monochromatic synchrotron radiation with an energy tuned just above the L{sub 1} edge.

74 ATOMIC AND MOLECULAR PHYSICS↗

Optimal design of minimum-energy pulses for Bloch equations in the case of dominant transverse relaxation

In this report, we apply optimal control theory to design minimum energy {pi}/2 and {pi} pulses for Bloch equations, in the case where transverse relaxation rate is much larger than longitudinal so the later can be neglected. Using Pontryagin's Maximum Principle, we derive an optimal feedback law and subsequently use it to obtain analytical expressions for the energy and duration of the optimal pulses.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Minimum size requirements for open-ended lasing from N two-level atoms in infinite cylindrical samples

Using the threshold condition relating the rate of pumping with the transverse decay rate and the real part of the eigenvalue of the dominant eigenmode of the dipole-dipole interaction kernel, I obtain the minimum radius which a cloud of N two-level atoms in infinite-cylindrical geometrical configuration coherently excited must obey to permit open-ended cw lasing.

74 ATOMIC AND MOLECULAR PHYSICS↗

Subadditivity of the minimum output entropy and superactivation of the classical capacity of quantum multiple access channels

We study subadditivity of the minimum output entropy (H{sub min}) of quantum multiple access channels (MACs). We provide an example of violation of the additivity theorem for H{sub min} known in classical information theory. Our result is based on a fundamental property of MACs, i.e., independence of each sender. The channels used in the example can be constructed explicitly. On the basis of subadditivity of H{sub min} we also provide an example of extremal superadditivity (superactivation) of the classical capacity region of MACs.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Minimum error discrimination between similarity-transformed quantum states

Using the well-known necessary and sufficient conditions for minimum error discrimination (MED), we extract an equivalent form for the MED conditions. In fact, by replacing the inequalities corresponding to the MED conditions with an equivalent but more suitable and convenient identity, the problem of mixed state discrimination with optimal success probability is solved. Moreover, we show that the mentioned optimality conditions can be viewed as a Helstrom family of ensembles under some circumstances. Using the given identity, MED between N similarity transformed equiprobable quantum states is investigated. In the case that the unitary operators are generating a set of irreducible representation, the optimal set of measurements and corresponding maximum success probability of discrimination can be determined precisely. In particular, it is shown that for equiprobable pure states, the optimal measurement strategy is the square-root measurement (SRM), whereas for the mixed states, SRM is not optimal. In the case that the unitary operators are reducible, there is no closed-form formula in the general case, but the procedure can be applied in each case in accordance to that case. Finally, we give the maximum success probability of optimal discrimination for some important examples of mixed quantum states, such as generalized Bloch sphere m-qubit states, spin-j states, particular nonsymmetric qudit states, etc.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Minimum thermal conductivity in superlattices: A first-principles formalism

The thermal conductivity of silicon-germanium superlattices is computed here from density-functional perturbation theory using relaxation times that include both anharmonic and interface roughness effects. A decrease in the group velocity of low-frequency phonons in addition to the interface-disorder-induced scattering of high-frequency phonons drives the superlattice thermal conductivity to below the alloy limit. At short periods, interplay between decrease in group velocity and increase in phonon lifetimes with increase in superlattice period leads to a minimum in the cross-plane thermal conductivity. Increasing the mass mismatch between the constituent materials in the superlattice further lowers the thermal conductivity below the alloy limit, pointing to avenues for higher efficiency thermoelectric materials.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Evolution of minimum-bias parton fragmentation in nuclear collisions

Minimum-bias fragment distributions (FDs) are calculated by folding a power-law parton energy spectrum with parametrized fragmentation functions (FFs) derived from e{sup +}-e{sup -} and p-p collisions. Substantial differences between measured e{sup +}-e{sup -} and p-p FFs suggest that FF 'universality' may not be a valid assumption. The common parton spectrum is constrained by comparison with a p-p p{sub t} spectrum hard component. Changes in FFs due to parton 'energy loss' or 'medium modification' are modeled by altering FF parametrizations consistent with rescaling QCD splitting functions. In-vacuum and in-medium FDs are compared with spectrum hard components from 200-GeV Au-Au collisions for several centralities. The reference for all nuclear collisions is the FD derived from in-vacuum e{sup +}-e{sup -} FFs. The hard component for p-p and peripheral Au-Au collisions is found to be strongly suppressed for smaller fragment momenta, consistent with the FD derived from in-vacuum p-p FFs. At a particular centrality the Au-Au hard component transitions to enhancement at smaller momenta and suppression at larger momenta, consistent with FDs derived from in-medium e{sup +}-e{sup -} FFs. Fragmentation systematics suggest that QCD color connections change dramatically in more-central A-A collisions. Observed parton and hadron spectrum systematics are inconsistent with saturation-scale arguments used to support assumptions of parton thermalization.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Zero yield at minimum (ZYAM) method and v{sub 2}: Underestimating jet yields from dihadron azimuth correlations

Dihadron azimuth correlations can provide combinatoric access to jet structure in nuclear collisions. To isolate true jet yields a combinatoric background must be subtracted, including a constant offset and a contribution from 'elliptic flow' (azimuth quadrupole measured by v{sub 2}{sup 2}). The principle of zero yield at minimum (ZYAM) has been introduced to determine the constant offset. Separate measurements determine v{sub 2}{sup 2}. This analysis suggests that the ZYAM offset is usually substantially overestimated, and v{sub 2}{sup 2} is overestimated by conventional analysis methods. Therefore, jet yields may be substantially underestimated in more-central A-A collisions, and the 'away-side' azimuth peak (back-to-back jet correlations) may be distorted leading to questionable inferences of 'Mach shocks'.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

General relativistic study of the neutrino path and calculation of the minimum photosphere for different stars

A detailed general relativistic (GR) calculation of the neutrino path for a general metric describing a rotating star is studied. We have calculated the neutrino path along the equatorial and polar plane. The expression for the minimum photosphere radius (MPR) is obtained and matched with the Schwarzschild limit. The MPR is calculated for the stars with two different equations of state (EOS) each rotating with two different velocities, to analyze the dependence of EOS and rotational velocity on the MPR. The results show that the MPR for the hadronic star is much greater than the quark star and the MPR increases as the rotational velocity of the star decreases. The MPR along the polar plane is larger than that along the equatorial plane.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Theory of minimum spanning trees. II. Exact graphical methods and perturbation expansion at the percolation threshold

Continuing the program begun by the authors in a previous paper, we develop an exact low-density expansion for the random minimum spanning tree (MST) on a finite graph and use it to develop a continuum perturbation expansion for the MST on critical percolation clusters in space dimension d. The perturbation expansion is proved to be renormalizable in d=6 dimensions. We consider the fractal dimension D{sub p} of paths on the latter MST; our previous results lead us to predict that D{sub p}=2 for d>d{sub c}=6. Using a renormalization-group approach, we confirm the result for d>6 and calculate D{sub p} to first order in epsilon=6-d for d<6 using the connection with critical percolation, with the result D{sub p}=2-epsilon/7+O(epsilon{sup 2}).

97 MATHEMATICS AND COMPUTING↗

Reducing Conservativeness of Polytopic Linear-Parameter-Varying Robust Vehicle Sideslip Angle Observer Through Minimum-Area Convex Quadrilateral Design

The polytopic linear-parameter-varying (LPV) method has become increasingly popular for designing intelligent control and estimation systems for ground vehicles, particularly for the vehicle sideslip angle observer. In vehicle lateral dynamics, the vehicle longitudinal velocity-induced nonlinearities are conventionally outer-approximated with polytopes such as rectangles or triangles to obtain a polytopic LPV system. Yet, such polytopic approximations tend to be conservative and may lead to inadequate observer performance. To address this issue, a minimum-area convex quadrilateral construction is proposed in this paper to reduce design conservatism. The suggested design is demonstrated through the synthesis of an LPV H ∞ robust vehicle sideslip angle observer. Furthermore, a dSPACE-ASM simulation study is conducted to demonstrate the effectiveness and the advantage of the proposed polytopic construction over a baseline approach.

Zhou, Xingyu↗

Characterizing Minimum Admissible Separation Distances in Heavy Duty Vehicle Platoons

Heavy duty (HD) vehicles platooning under highway operating conditions, have been projected to provide significant fuel economy (FE) gains based on aerodynamic drag reduction of the platooning vehicles. Realizing these benefits under real-world operating conditions have several challenges. This paper (the second as part of series) quantifies the minimum admissible separation distance between platooning vehicles in HD commercial vehicle (CV) applications. This distance must be set up such that no collision occurs with leading vehicles under all deceleration conditions. In this paper key interactions to characterize this distance are demonstrated. These include, road surface conditions, grade, inter-vehicle communication delays, air-brake lag time, vehicle speed, weight, and aerodynamic drag. It is seen that characterizing the vehicle and road dynamics will be critical in establishing required deceleration or stopping distances for each vehicle in a platoon. The results of the study also necessitate vehicle control systems that can dynamically adjust not only the separation distances but also the braking reference points based on road conditions. The narrative provides application decision personnel with a well-defined set of admissible separation distance impact factors to consider as part of their architecture selection process.

Sujan, Vivek↗

Energy-Optimal Vehicle Longitudinal Motion Control via Pontryagin’s Minimum Principle and Ultra-Local Model

Longitudinal vehicle motion control is essential for enhancing performance and optimizing a vehicle’s energy usage. However, it remains a challenging task due to the nonlinear and uncertain nature of vehicle dynamics, along with varying driving conditions. This paper presents a novel ultra-local optimal control approach based on Pontryagin’s Minimum Principle (PMP) that circumvents the need for detailed system identification by employing an ultra-local model. The control objective is to minimize the total energy consumption under boundary conditions while ensuring smooth traction force generation. The proposed approach is evaluated using a high-fidelity vehicle model in three representative scenarios: (i) nominal driving, (ii) a change in tire road friction coefficient (TRFC) from 0.5 to 0.65 and road slope from 0% to 5% during the maneuver, with target velocity unchanged, and (iii) a change in target velocity from 20 m/s to 0 m/s during the maneuver, while maintaining nominal TRFC and slope conditions. The simulation results demonstrate that the proposed method delivers robust performance, effectively balancing consumption and tracking accuracy in all tested scenarios.

Waleed khan, Muhammad [The University of Texas at ↗

Unscented Kalman Filter-based Unbiased Minimum-Variance Estimation for Nonlinear Systems with Unknown Inputs

This paper proposes an unscented Kalman filter (UKF)-based unbiased minimum-variance estimation (UMV) method for the nonlinear system with unknown inputs. By utilizing the statistical linerization, the nonlinear system and measurement functions are transformed into a “linear-like” regression form. The latter preserves the nonlinearity of the system and the measurement models. To this end, the unknown inputs can be estimated by the weighted least-squares. This “linear-like” regression form also allows us to resort to the UMV state estimation framework for the development of new nonlinear filter to handle unknown inputs. Specifically, two approaches have been developed: 1) given the estimated inputs, we derive a filter by minimizing the trace of the state error covariance matrix; 2) without input estimation, we derive the filter by minimizing the trace of the state error covariance matrix subject to a constraint imposed on the gain matrix. We prove that these two approaches provide the same results. Numerical results validate the effectiveness of the proposed method.

Unscented Kalman filter, unbiased minimumvariance ↗

Design of a New Superconducting Magnet System for High Strength Minimum-B Fields for ECRIS

A novel Mixed Axial and Radial field System (MARS) seeks to enhance the B fields inside the plasma chamber within the limits of a given conductor, thereby making it possible to raise the operating fields for Electron Cyclotron Resonance Ion Sources (ECRISs). The MARS concept consists of a hexagonally shaped closed-loop coil and a set of auxiliary solenoids. The application of MARS will be combined with a hexagonal plasma chamber to maximize the use of the radial fields at the chamber inner surfaces. Calculations using Opera's TOSCA-3D solver have shown that MARS can potentially generate up to 50% higher fields and use of only about one half of the same superconducting wire, as compared with existing magnet designs in ECRISs. A MARS magnet system built with Nb 3 Sn coils could generate a high strength minimum-B field of maxima of ≥ 10 T on axis and ~6 T radially in an ECRIS plasma chamber. Following successful development, the MARS magnet system will be the best magnet scheme for the next generation of ECRISs. This paper will present the MARS concept, magnet design, prototyping a copper closed-loop coil, and discussions.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

A Minimum Principle-Based Algorithm for Energy-Efficient Eco-Driving of Electric Vehicles in Various Traffic and Road Conditions

Our report presents an optimization algorithm for energy-efficient driving of electric vehicles. The algorithm is based on Pontryagin’s Minimum Principle by considering the driving mission as an optimal control problem. On a planned route, diverse application cases may occur due to various physical traits such as powertrain (e.g., switching between motor and generator operation), environmental variations (e.g., terrain grade change), traffic laws (e.g., speed limits), and safety concerns (e.g., headway to the leading vehicle). The proposed algorithm handles these real-world challenges by considering the perturbation to the system dynamics and the constraints to the control and state variables.

33 ADVANCED PROPULSION SYSTEMS↗

Energy-Efficient Driving in Connected Corridors via Minimum Principle Control: Vehicle-in-the-Loop Experimental Verification in Mixed Fleets

Connected and automated vehicles (CAVs) can plan and actuate control that explicitly considers performance, system safety, and actuation constraints in a manner more efficient than their human-driven counterparts. In particular, eco-driving is enabled through connected exchange of information from signalized corridors that share their upcoming signal phase and timing (SPaT). This is accomplished in the proposed control approach, which follows first principles to plan a free-flow acceleration-optimal trajectory through green traffic light intervals by Pontryagin's Minimum Principle in a feedback manner. Urban conditions are then imposed from exogeneous traffic comprised of a mixture of human-driven vehicles (HVs) - as well as other CAVs. As such, safe disturbance compensation is achieved by implementing a model predictive controller (MPC) to anticipate and avoid collisions by issuing braking commands as necessary. The control strategy is experimentally vetted through vehicle-in-the-loop (VIL) of a prototype CAV that is embedded into a virtual traffic corridor realized through microsimulation. Up to 36% fuel savings are measured with the proposed control approach over a human-modelled driver, and it was found connectivity in the automation approach improved fuel economy by up to 26% over automation without. Additionally, the passive energy benefits realizable for human drivers when driving behind downstream CAVs are measured, showing up to 22% fuel savings in a HV when driving behind a small penetration of connectivity-enabled automated vehicles.

33 ADVANCED PROPULSION SYSTEMS↗

Aperture-time of oxygen-precursor for minimum silicon incorporation into the interface-layer in atomic layer deposition-grown HfO{sub 2}/Si nanofilms

Hafnium oxide nanofilms were grown with atomic layer deposition on H-terminated Si (001) wafers employing tetrakis dimethyl amino hafnium (TDMA-Hf) and water as precursors. While the number of cycles (30) and the aperture-time for TDMA-Hf (0.08 s) were kept constant, the aperture-time (τ{sub H{sub 2O}}) for the oxidant-agent (H{sub 2}O) was varied from 0 to 0.10 s. The structure of the films was characterized with robust analysis employing angle-resolved x-ray photoelectron spectroscopy. In addition to a ∼1 nm hafnium oxide layer, a hafnium silicate interface layer, also ∼1 nm thick, is formed for τ{sub H{sub 2O}} > 0. The incorporation degree of silicon into the interface layer (i.e., the value of 1 − x in Hf{sub x}Si{sub 1−x}O{sub y}) shows a minimum of 0.32 for τ{sub H{sub 2O}} = 0.04 s. By employing the simultaneous method during peak-fitting analysis, it was possible to clearly resolve the contribution from the silicate and from oxide to the O 1s spectra, allowing for the assessment of the oxygen composition of each layer as a function of oxidant aperture time. The uncertainties of the peak areas and on the thickness and composition of the layers were calculated employing a rigorous approach.

36 MATERIALS SCIENCE↗