Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “mercury”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 271 records · Page 15

Mercury’s Chaotic Secular Evolution as a Subdiffusive Process

Abstract Mercury’s orbit can destabilize, generally resulting in a collision with either Venus or the Sun. Chaotic evolution can causeg 1 to decrease to the approximately constant value ofg 5 and create a resonance. Previous work has approximated the variation ing 1 as stochastic diffusion, which leads to a phenomological model that can reproduce the Mercury instability statistics of secular andN-body models on timescales longer than 10 Gyr. Here we show that the diffusive model significantly underpredicts the Mercury instability probability on timescales less than 5 Gyr, the remaining lifespan of the solar system. This is becauseg 1 exhibits larger variations on short timescales than the diffusive model would suggest. To better model the variations on short timescales, we build a new subdiffusive phenomological model forg 1 . Subdiffusion is similar to diffusion but exhibits larger displacements on short timescales and smaller displacements on long timescales. We choose model parameters based on the behavior of theg 1 trajectories in theN-body simulations, leading to a tuned model that can reproduce Mercury instability statistics from 1–40 Gyr. This work motivates fundamental questions in solar system dynamics: why does subdiffusion better approximate the variation ing 1 than standard diffusion? Why is there an upper bound ong 1 , but not a lower bound that would prevent it from reachingg 5 ?

Astronomy & Astrophysics↗

Dynamic behavior of the mercury damper

The dynamic behavior of the mercury nutation damper is investigated. Particular attention is paid to the eccentric annular mercury configuration, which is the final continuous ring phase that occurs in the operation of all mercury dampers. In this phase, damping is poorest, and the system is closely linear. During the investigation, the hydrodynamic problem is treated as three dimensional, and extensive use is made of a variational principle of least-viscous frictional power loss. A variational principle of least-constraint is also used to advantage. Formulas for calculating the behavior of the mercury damper are obtained. Some confirmatory experiments were performed with transparent ring channels on a laboratory gyroscope. Selected movie frames taken during wobble damping are shown along with the results of film measurements.

Crout, P. D.↗

Mariner Venus-Mercury 1973 midcourse velocity requirements and delivery accuracy

The primary mission is described, which consists of encounters with Venus and Mercury; (a second encounter with Mercury is also possible). The exptected navigation sequences were simulated with a Monte Carlo computer program for the purpose of determining midcourse correction velocity requirements and delivery accuracies. These simulations provide sensitivity in velocity requirements and delivery accuracies to error sources affecting the navigation process. The orbit determination capability at the final pre-Venus maneuver is shown to be the dominant contributor to the velocity requirements for the primary mission. Similarly, the orbit determination capability at the final pre-Mercury maneuver is shown to be the dominant contributor to the delivery accuracy at Mercury.

Mckinley, E. L.↗

Study of mechanism which causes film formation on mercury surfaces

The mechanism by which small quantities of dissolved tin, sodium, and lithium lower the rate of evaporation of mercury in vacuum is determined. An apparatus was built in which dilute amalgams could be prepared and studied in an oxygen-free environment before being exposed to oxygen under controlled conditions. The apparatus was able to maintain a pressure of less than 1.3 x 0.000001 N/sqm (10 to the minus 8th power torr) of gases and vapors other than mercury and less than 1.3 x 10 to the minus 8th N/sq m (10 to the minus 10th power torr) partial pressure of oxygen; also, it provided for mechanical sweeping of the liquid metal surfaces in the vacuum environment. The rates of evaporation of pure mercury and of dilute amalgams of tin (52 ppm), sodium (229 ppm), and lithium (165 ppm) were determined at temperature between 25 and 55 C both before and after 70 minute exposures to an approximately 270 N/sq m (2 torr) pressure of oxygen. The rates of evaporation of the pure mercury and the amalgams as first prepared were similar but the rates for the amalgams were reduced by at least 80% at 25 C as a result of the exposure to oxygen. The effect of the oxygen treatment could be completely removed by sweeping the amalgam surfaces. It was concluded that the reduced rates of evaporation resulted from the formation of transparent, insoluble, oxide films on the amalgam surfaces.

Frohnsdorff, G.↗

Potassium permanganate for mercury vapor environmental control

Potassium permanganate (KMnO4) was evaluated for application in removing mercury vapor from exhaust air systems. The KMnO4 may be used in water solution with a liquid spray scrubber system or as a solid adsorber bed material when impregnated onto a zeolite. Air samples contaminated with as much as 112 mg/cu m of mercury were scrubbed to 0.06mg/cum with the KMnO4-impregnated zeolite (molecular sieve material). The water spray solution of permanganate was also found to be as effective as the impregnated zeolite. The KMnO4-impregnated zeolite was applied as a solid adsorber material to (1) a hardware decontamination system, (2) a model incinerator, and (3) a high vacuum chamber for ion engine testing with mercury as the propellant. A liquid scrubber system was also applied in an incinerator system. Based on the results of these experiments, it is concluded that the use of KMnO4 can be an effective method for controlling noxious mercury vapor.

Kuivinen, D. E.↗

Mariner Venus Mercury, 1973

The Mariner Venus Mercury 1973 unmanned mission is discussed, which is designed to conduct a close flyby investigation of the planet Mercury after using the gravity-turn technique in a Venus flyby. Its scientific purposes include photographic, thermal, and spectral surveys, radio occulation, and charged particle/magnetic measurements at each planet, observation of solar-system fields and particles from 1.0 a.u. down to 0.4 a.u., and comparative planetary surveys between the Earth, the Moon, Venus, and Mercury. It is also intended to observe Kohoutek's comet. The trajectory permits establishment of a solar orbit in phase with Mercury's, permitting repeated encounters with that planet.

Wilson, J. H.↗

Mercury: Aspects of its ecology and environmental toxicity

A study was conducted to determine the effects of mercury pollution on the environment. The possible sources of mercury contamination in sea water are identified. The effects of mercury on food sources, as represented by swordfish, are analyzed. The physiological effects of varying concentrations of mercury are reported. Emphasis is placed on the situation existing in the Hawaiian Islands.

Siegel, S. M.↗

Water hyacinths and alligator weeds for removal of lead and mercury from polluted waters

Removal of lead and mercury by water hyacinths (Eichhornia crassipes) (Mart.) Solms and alligator weeds (Alternanthera philoxeroides) (Mart.) Griesb. was investigated. Water hyacinths demonstrated the ability to remove 0.176 mg of lead and 0.150 mg of mercury per gram of dry plant material from distilled water and river water in a 24-hour period. One acre of water hyacinths is potentially capable of removing 105.6 grams of lead and 90.0 grams of mercury per day. Alligator weeds removed 0.101 mg of lead per gram of dry plant material in a 24-hour period. This same plant also demonstrated the ability to remove a minimum of 0.153 mg of mercury per gram of dry plant material in a six hour period.

Wolverton, B. C.↗

Mercury - Internal structure and thermal evolution

Mercury's thermal evolution and internal structure are modeled based on the planet's gross physical properties (which imply a high metallic iron content) and predictions for its chemistry made from the Lewis-Cameron model of condensation of the primitive solar nebula (which implies that Mercury may be composed only of those materials that condensed at temperatures near that of metallic iron condensation in the cooling nebula). Various heat sources, initial temperatures, and thermal conductivities are considered for a homogeneous model and a differentiated two-layer model. Density distributions are calculated from the mean density and estimates of the present-day temperature. The moment of inertia and the hydrostatic value of the second degree harmonic coefficient of Mercury's gravity field are found for the differentiated and undifferentiated models. These results should be useful for preliminary interpretation of the Mariner 10 measurements of Mercury's gravitational field.

Siegfried, R. W., II↗

A reinterpretation of the reported energetic particle fluxes in the vicinity of Mercury

During the Mercury flyby of Mariner 10, observations of large fluxes of energetic electrons (energies in excess of 0.3 MeV) and protons (energies between 0.53 and 1.9 MeV) were reported by Simpson et al. (1974). The reported simultaneous enhancements of protons and electrons in the magnetic field of Mercury have raised some perplexing planetology questions. It is shown here that the response of the proton detector in the Mariner 10 experiment is most plausibly attributable to the pileup of low-energy electrons rather than the presence of protons in the vicinity of Mercury. Further, the reported lower-limit electron differential spectrum exponent of at least 9 and the 300-keV electron fluxes are probably in quantitative error, especially where the count rates are highest. It is concluded that no 'new' acceleration mechanism has been identified at Mercury.

Armstrong, T. P.↗

Status of 30-centimeter-diameter mercury ion thruster isolator development

Results are presented of several 30 cm diameter mercury ion thruster isolator life tests that show that the onset and exponential increase of leakage current problems observed in earlier thruster operations and isolator tests have been solved. A 10,006 hour life test of a main isolator vaporizer operated with no mercury flow at 320 C and 1500 volts was found to have no onset of leakage current during the test. A cathode-isolator vaporizer operated with a mercury discharge at 340 to 360 C and 1200 volts for 18,000 hours, was found to have a small increase of leakage current with time. A 10,000 hour thruster life test exhibited no increase of leakage current during the life test. Isolators have been developed which will satisfy 30 cm mercury ion thruster mission requirements.

Mantenieks, M. A.↗

Observations at the planet Mercury by the plasma electron experiment, Mariner 10

Plasma electron observations made onboard Mariner 10 are reported. Three encounters with the planet Mercury show that the planet interacts with the solar wind to form a bow shock and a permanent magnetosphere. The observations provide a determination of the dimensions and properties of the magnetosphere, independently of and in general agreement with magnetometer observations. The magnetosphere of Mercury appears to be similar in shape to that of the Earth but much smaller in relation to the size of the planet. Electron populations similar to those found in the Earth's magnetotail, within the plasma sheet and adjacent regions, were observed at Mercury; both their spatial location and the electron energy spectra within them bear qualitative and quantitative resemblance to corresponding observations at the Earth. The magnetosphere of Mercury resembles to a marked degree a reduced version of that of the Earth, with no significant differences of structure.

Ogilvie, K. W.↗

Project Mercury: the Program and Its Objectives

Project Mercury is reviewed in the light of experience gained thus far in the technical implementation of this Nation's initial program for manned orbital flight. Initial guidelines formulated for the Mercury program are reviewed, together with some of the technical considerations that have influenced the design of the capsule and the operational plan for the booster-capsule vehicle. The role of the astronaut in the Mercury program is discussed, and some observations are made concerning the impact of the Mercury program on future manned space ventures.

Donlan, C. J.↗

Status of 30-centimeter-diameter mercury ion thruster isolator development

Results are presented for several 30-cm-diameter mercury-ion-thruster isolator life tests which show that the onset and exponential increase of leakage-current problems observed in earlier thruster operations and isolator tests have been solved. A 10,006-hour life test of a main isolator-vaporizer operated with no mercury flow at 320 C and 1500 volts was found to have no onset of leakage current during the test. A cathode-isolator-vaporizer (CIV) operated with a mercury discharge at 340 to 360 C and 1200 volts for 18,000 hours was found to have a small increase (0.004 micro A/hr) in leakage current with time. A 10,000-hour thruster life test exhibited no increase in leakage current during the life test. It is concluded that isolators have been developed which will satisfy 30-cm mercury-ion-thruster mission requirements.

Mantenieks, M. A.↗

The extreme ultraviolet albedos of the planet Mercury and of the moon

The albedo of the moon in the far UV was measured by Mariner 10 at a solar phase angle of 74 deg, and the geometric albedo of Mercury was measured in same wavelength range (584-1657 A) at solar phase angles ranging from 50 to 120 deg. For both the moon and Mercury there is a general increase in albedo for wavelengths decreasing from 1657 to 584 A. The ratio of the albedos of Mercury and the moon increases from about 0.6 to 0.8 in the range 600-1600 A. This merely points to a difference in the surfaces of the moon and Mercury, there being insufficient data to make any conclusions regarding the nature of the difference.

Wu, H. H.↗

Mercury's helium exosphere after Mariner 10's third encounter

From Mariner 10 third encounter UV data, a value of .00045 was calculated as the fraction of the solar wind He++ flux intercepted and captured by Mercury's magnetosphere if the observed He atmosphere is maintained by the solar wind. If an internal source for He prevails, the corresponding upper bound for the global outgassing rate is estimated to be 4.5 x 10 to the 22nd power per sec. A surface temperature distribution was used which satisfies the heat equation over Mercury's entire surface using Mariner 10 determined mean surface thermal characteristics. The means stand off distance of Mercury's magnetopause averaged over Mercury's orbit was also used.

Curtis, S. A.↗

Comparisons of Mercury and the moon; Proceedings of the Conference, Houston, Tex., November 15-17, 1976

Papers are presented outlining various comparisons of Mercury and the moon. Specific topics include the planetary magnetism and the interiors of the moon and Mercury, the relationship between crustal tectonics and internal evolution, global tectonics, the origin and relative age of lunar and Mercurian intercrater plains, and the relative preservation states of secondary craters. Comparisons are also discussed between lunar and Mercurian rayed craters, large impact structures, isostasy and average crustal viscosity. Attention is given to global seismic effects of basin-forming impacts, interpretations of optical observations of Mercury and the moon, and the production of simple molecules on the surface of Mercury.

Simonds, C. H.↗

Production of simple molecules on the surface of Mercury

Lunar sample studies have shown that solar-wind irradiation of the lunar surface has produced a variety of low-molecular-weight compounds. Analysis of the lunar soils has revealed the presence of H2, CH4, H2O, N2, CO, CO2, He, Ne and other components which are extralunar. Irradiation experiments on lunar materials and analogs have shown that solar-wind and solar-flare irradiation of the lunar surface produces selected low-molecular-weight components. Solar-wind irradiation of Mercury's surface should also produce a wide variety of low-molecular-weight species because of the increased solar flux, which results from Mercury being nearer the sun than the moon. The thermal regime of Mercury's surface would result in thermal evaporation of low-temperature components followed by 'cold-trapping' on the night-time side of the planet. Such desorption-adsorption processes assist chemical weathering of Mercury's regolith.

Gibson, E. K., Jr.↗