Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “magnetism”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 271 records · Page 15
All sourcesNASA NTRSDOE OSTI
NASA NTRS2018

MAVEN Case Studies of Plasma Dynamics in Low‐Altitude Crustal Magnetic Field at Mars 1: Dayside Ion Spikes Associated With Radial Crustal Magnetic Fields

We report for the first time, simultaneous ion, electron, magnetic field vector and electric field wave measurements made possible by Mars Atmosphere and Volatile EvolutioN, during ion energy flux spikes in low‐altitude radial crustal magnetic fields on the Mars dayside. Observations show energetic electrons and ions (E > 25 eV) precipitating on magnetic field lines assumed as closed. Ions (E < 1.4 keV) display broad velocity distributions toward Mars, showing ions flowing from higher altitude possibly after magnetic reconnection or loss cone filling from pitch angle scattering effects. Precipitating ions (E < 1.4 keV) show nonadiabatic features depending on ion mass and energy and returning ions (E < 1.4 keV) show evidence of conserving the first adiabatic invariant in a mirror field. We observe magnetic field perturbations up to 60 nT, electric field wave amplitudes up to 38 mV/m, and brief periods of peaked electron spectra. At ∼175 km and at times Mars Atmosphere and Volatile EvolutioN is below the mirroring altitude of electrons, we observe mirroring and transverse heating of H+ ions alongside increased electric field wave amplitude fluctuations. It suggests field aligned potential drops result from different mirror altitudes of ions and electrons. Ions E > 1.4 keV (O+) occur as injected accelerated ion beams and ions heated after energization or deceleration. Energy dispersed kilo‐electron‐volt ions suggest a selection effect in radial magnetic fields for lower‐energy Marsward ions, compared to reflection of higher‐energy anti‐Sunward ions. Precipitating kilo‐electron‐volt ions show energy deposition rates of 3.6 ×10(exp -6) W/sq m and sputtering escape rates from precipitating O+ ions of 1.5 ×10(exp 5)/(sq cm.s) and 2.1 ×10(exp 6)/(sq cm.s) are calculated.

Plasma Dynamics↗
NASA NTRS2021

Inversion of Magnetic Measurements of the Swarm A Satellite of the Bangui Magnetic Anomaly

We wanted to make a satellite altitude magnetic anomaly map of the large magnetic anomaly in the Central African Republic, the Bangui magnetic anomaly, with data from the Swarm satellites. In the first part of our study, we summarize the earlier investigations and their interpretation. In the second we discuss our data processing applied to produce a magnetic anomaly map. We used the IGRF 12th to remove the long-wavelength regional anomalies. We will use an inverse procedure, which always requires a solution of the direct problem, and a horizontal polygonal prism given in the Descartes coordinate system. For this, reason the total magnetic anomaly was transformed into the Descartes coordinate system. The magnetization and its direction were used from our previous paper. The inverse problem is solved by the Simplex procedure. Our selected polygon has 14 geometrical parameters however, the inverse problem that is the numerical determination of the minimum problem is solved in the 14 dimensions. The result of our inverse problem was the 12 horizontal coordinates and the two upper and lower data of the polygon. The origin of the Bangui anomaly has been discussed in several scientific reports, either as a deep crustal tectonic feature or the result of a large external impactor. However, according to our inversion computations we cannot make any unambiguous finding for the origin of this feature. The inaccuracy in our total anomaly map is given by the Gaussian error propagation.

KI Kis↗
DOE OSTI2022

Heat treatable magnets having improved alignment through application of external magnetic field during binder-assisted molding

Improved manufacturing processes and resulting anisotropic permanent magnets, such as for example alnico permanent magnets, having highly controlled and aligned microstructure in the solid state are provided. A certain process embodiment involves applying a particular orientation and strength of magnetic field to loose, binder-coated magnet alloy powder particles in a compact-forming device as they are being formed into a compact in order to preferentially align the magnet alloy powder particles in the compact. The preferential alignment of the magnet alloy powder particle is locked in place in the compact by the binder after compact forming is complete. After removal from the device, the compact can be subjected to a subsequent sintering or other heat treating operation.

Kassen, Aaron G.↗
DOE OSTI2019

Magnetic Relaxation Experiments in CNT-Based Magnetic Nanocomposite

In this work, we discuss the relaxation of the magnetic moments in a novel carbon nanotube (CNT)-based nanocomposite synthesized by using chemical vapor deposition process. The material consists of a matrix of CNT filled by Fe-based nanoparticles. This structure is seen clearly by scanning and transmission. X-ray diffraction and Raman spectroscopy are used to detect the predominant Fe{sub 3}C phase and the CNT presence in the sample, respectively. The results obtained from both hysteresis cycles, M(H), and zero field cooled-field cooled (ZFC-FC) measurements confirm that the material is characterized by both a strong ferromagnetic exchange and random magnetic anisotropy. For the first time, we have been able to fit the magnetic relaxation data, M(t), by using both the two distributions of nanoparticles data deduced from the ZFC-FC data and the temperature dependence of the magnetic anisotropy obtained from the law of approach to saturation in random magnets. .

77 NANOSCIENCE AND NANOTECHNOLOGY↗
DOE OSTI2021

Active magnetic regenerative cooling with smaller magnets

Magnetocaloric heat pumping near room temperature, a.k.a. magnetic cooling, relies on the active regenerator cycle to achieve functional temperature spans and realize economic and societal benefits promised by this emerging solid-state cooling technology. The cycle itself depends upon synchronizing oscillating flow of a heat transfer fluid through a solid porous active material matrix, or the refrigerant, with periods when the refrigerant is in the highest available (field-on) and in nearly zero (field-off) magnetic fields to accomplish heat transfer. With this in mind, in this work we analyze varying flow and magnetic field wave forms and the timing between when the fluid is pumped and when the magnetic field is turned on and off. We demonstrate that the volume and the cost of permanent magnet generating the field changes can be cut nearly in half with little to no effect on the device temperature span and cooling power normalized by the refrigerant mass.

36 MATERIALS SCIENCE↗
DOE OSTI2025

The electronic structure, crystal fields, and magnetic anisotropy in RECo 5 magnets

The current progress in describing rare-earth-based magnets' electronic structure and magnetic properties is discussed. We use several currently popular electronic structure methods to show the typical values of critical parameters that define the physics of RECo 5 (RE = rare earth atom) materials. The magnetic moments and magnetic anisotropy of 4f atoms are obtained using several approaches, including anisotropic 4f-charge density-constrained DFT and DFT+HI methods. We also suggest the introduction of "penalty" functional for obtaining correct variational total energy in the traditional Hund's rule-constrained DFT-based techniques. The applicability and future extensions are discussed. The proposed combination of methods is potentially suitable for high-throughput computational searches of new rare-earth-containing magnetic materials.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2024

Inhomogeneous magnetic ordered state and evolution of magnetic fluctuations in Sr⁢(Co 1–x ⁢Ni x ) 2 ⁢P 2 revealed by 31 P NMR

SrCo 2 ⁢P 2 with a tetragonal structure is known to be a Stoner-enhanced Pauli paramagnetic metal being nearly ferromagnetic. Recently J. Schmidt et al. [Phys. Rev. B 108, 174415 (2023)] reported that a ferromagnetic ordered state is actually induced by a small Ni substitution for Co of x = 0.02 in Sr⁢(Co 1–x ⁢Ni x ) 2 ⁢P 2 where an antiferromagnetic ordered phase also appears by further Ni substitution with x = 0.06–0.35. Here, in this work, using nuclear magnetic resonance (NMR) measurements on 31 P nuclei, we have investigated how the magnetic properties change by the Ni substitution in Sr⁢(Co 1–x ⁢Ni x ) 2 ⁢P 2 from a microscopic point of view, especially focusing on the evolution of magnetic fluctuations with the Ni substitution and the characterization of the magnetically ordered states. The temperature dependencies of the 31 P spin-lattice relaxation rate divided by temperature (1/T 1 ⁢T) and Knight shift (K) for SrCo 2 ⁢P 2 are reasonably explained by a model where a double-peak structure for the density of states near the Fermi energy is assumed. Based on a Korringa ratio analysis using the T 1 and K data, ferromagnetic spin fluctuations are found to dominate in the ferromagnetic Sr⁢(Co 1–x ⁢Ni x ) 2 ⁢P 2 as well as the antiferromagnets where no clear antiferromagnetic fluctuations are observed. We also found the distribution of the ordered Co moments in the magnetically ordered states from the analysis of the 31 P-NMR spectra exhibiting a characteristic rectangular-like shape.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2020

Local strain-dependent electronic structure and perpendicular magnetic anisotropy of a MnGaN 2D magnetic monolayer

Local strain-dependent spin-polarized electronic structure of a two-dimensional (2D) magnetic layer is an exciting property for practical applications. For example, it holds the promise for advanced ultrathin spintronic nanodevices with customized electronic and magnetic properties by local strain engineering. Here, we demonstrate that the spin-polarized electronic structure of a 2D manganese gallium nitride (MnGaN-2D) magnetic monolayer is sensitive to intrinsic local lattice strain, as proven by first-principles calculations and indicated by scanning tunneling spectroscopy measurements. Atomic resolution images reveal a highly non-Gaussian lattice spacing/strain distribution, while the spectroscopy reveals variations in the electronic density of states. Simulations of the MnGaN-2D monolayer based on first-principles calculations, including both isotropic and anisotropic strains, confirm a highly strain-dependent manganese partial density of states. Spin-orbit coupling is included which indicates either out-of-plane perpendicular magnetic anisotropy (PMA) or in-plane magnetic anisotropy, dependent on the type of strain whether compressive or tensile, suggesting that MnGaN-2D is magnetoelastic. The MnGaN-2D PMA is further supported by superconducting quantum interference device magnetometry measurements which reveal a high spin polarization of ~ 79 % at room temperature.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2019

Effect of Ion (Ar{sup +}) Irradiation on Cluster Magnetism and Magnetic Interactions in Fe{sub 67}Cr{sub 18}B{sub 15} Amorphous Alloy

The comparison of the resonance magnetic absorption spectra with the data on structure and magnetic properties of Fe{sub 67}Cr{sub 18}B{sub 15} amorphous samples has shown that a randomly inhomogeneous medium of amorphous alloy is multiphase. Two types of samples with the same chemical composition, but with a different clusterized structure, and the use of (Ar{sup +}) ion irradiation in the experiment made it possible to separate four basic phases with different magnetic properties. The basic phase α-(Fe,Cr) contains large clusters of D < 400 Å in size with a tendency to phase separation of iron (α-Fe) and chromium (α-Cr), which under irradiation, enhances the competing FM and AFM magnetic interactions and increases the intensity of the resonance magnetic absorption lines associated with α-Fe and α-Cr. The phase Fe{sub 3}B (D < 100 Å) is detected by independent line in the resonance absorption spectra only when its groupings are isolated from the α-(Fe,Cr) metal phase clusters. The fourth phase contains precluster groupings and disappears when the sample is irradiated.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
NASA NTRS2021

Preliminary Stress-Annealing Process and its Effect on Magnetic Properties of Fe-based Soft Magnetic Alloys

Stress-annealing (SA) is a novel secondary processing technique capable of significantly increasing magnetic anisotropy and controlling magnetic permeability in planar-cast amorphous precursor ribbons. In this technical memorandum, measures taken to improve the mechanical handling of brittle Fe-based ribbons are described for a custom SA system. This system was then used to process a series of Fe-based alloys (Fe-2Nb-2Mo-1Cu-15.5Si-7B at.%, Fe-5Co-3Ta-1Cu-16Si-6.5B at.%, and Fe-5Co-3Ta-1Cu-16.5Si-6B at.%) and the resulting magnetic properties were determined. The Fe-5Co-3Ta-1Cu-16.5Si-6B at.% alloy was found to be the most promising composition of the three in terms of surviving an optimized spool-to-spool continuous SA process under 90 MPa of tensile stress at 650 °C using a feed rate of 75.5 in/min, which equated to approximately 10 second anneal time. These optimally annealed ribbons exhibited flat hysteresis loops with a saturation magnetization of nearly 1.2 T, low magnetic coercivity (≈ 2 A m-1), and relative permeability of approximately 500.

soft magnetic alloy↗
DOE OSTI2026

Degradation of Magnetic Materials for High-Temperature Active Magnetic Bearing Applications in CO₂-Based Environments

High-temperature Active Magnetic Bearings (AMBs) are a promising alternative to conventional bearings in hermetically sealed turbomachinery for supercritical CO₂ (sCO₂) systems. They offer reduced CO₂ leakage, lower windage losses, enhanced misalignment tolerance, reduced wear, and built-in diagnostic capabilities. A critical challenge, however, is ensuring long-term material stability in harsh CO₂-rich environments. This study investigated the degradation behavior of permanent and soft magnetic materials (Alnico 9C, Alnico 5-7C, SmCo 18-T550, Hiperco-50, and coated variants) after up to 6,000 hours of exposure in gaseous CO₂, sCO₂, or air at 450 °C and 550 °C. The evaluation included post-exposure mass change measurements, scanning electron microscopy (SEM) analysis, and magnetic property assessments. The results demonstrate oxidation rates, microstructural evolution, and retention of magnetic performance across conditions. The findings offer essential insights into the thermal corrosion behavior of magnetic materials under CO₂ rich environments and serve as a reference for material selection in AMB system designs.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Magnetic field induced a b -plane rotation of the Eu magnetic moments in trigonal EuMg 2 Bi 2 and EuMg 2 Sb 2 single crystals below their Néel temperatures

The thermodynamic and electronic-transport properties of trigonal EuMg 2 Bi 2 in ab-plane magnetic fields H x and the A-type antiferromagnetic structure have recently been reported. The Eu magnetic moments with spin S = 7/2 remain locked in the ab plane up to and above the ab-plane critical field $H^{c}_{x}$ = 27.5 kOe at which the Eu moments become parallel to H x . Here additional measurements at low fields are reported that reveal a new spin-reorientation transition at a field H c1 ≈ 465 Oe where the Eu moments remain in the ab plane but become perpendicular to H x . At higher fields, the moments cant toward the field resulting in M ∝ H x up to $H^{c}_{x}$. Similar results are reported from measurements of the magnetic properties of EuMg 2 Sb 2 single crystals, where H c1 ≈ 220 Oe is found. Theory is formulated that models the low-field magnetic behavior of both materials, and the associated anisotropies are calculated. Further, the ab-plane trigonal anisotropy in EuMg 2 Sb 2 is found to be significantly smaller than in EuMg 2 Bi 2 .

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2021

Unraveling Site Selective Magnetic Properties of Cobalt Sites in Critical Elements Lean RE(TM)5 Magnet Materials

We report here our discovery of crystallographic and interstitial sites and onsite electron correlation propelled intrinsic and derived permanent magnetic properties of critical elements lean RE(TM) 5 (RE = La, Ce and TM = Fe, Co) magnet materials. A full potential linearized augmented plane wave (FP-LAPW) method within the local density approximation (LDA) is used to investigate and analyze the electronic structure and magnetism of these RE(TM) 5 type structures. To better correlate the experimental results, the effective Coulomb (U) and exchange (J) interactions (Hubbard parameters) are crucial at the transition metal sites. Results show that the main propeller of magnetic anisotropy in these compounds is the cobalt atoms at the 2c sites not the 3g sites. This site-specific property and site preference energetics are used to replace 3g sites with non-critical elements such as iron that exhibits a larger magnetic moment. Based on this strategic replacement, we predict two new compounds that have a larger hardness parameter with a relatively large energy product due to the atomic dilution caused by interstitial addition of nitrogen in the compounds: CeCo 2 Fe 3 N 2 and LaCo 2 Fe 3 N 2 .

Rare-earths↗
DOE OSTI2026

A solid-state extrusion pathway extensible to upcycling aluminum scrap and end-of-life permanent magnets into ductile Al-6061/SmCo 5 structural magnetic composites

Permanent magnets offer strong potential for multifunctional structural components, but their inherent brittleness limits direct integration. Here, SolidStir® Extrusion (SSE) is used to embed SmCo5 powder into AA6061 in the solid state, and the resulting microstructure, interfacial chemistry, mechanical properties, and magnetic response are systematically characterized. SSE fragments the initial SmCo 5 powder into predominantly fine particles dispersed within an ultrafine Al matrix, with a volume fraction of ∼ 4–6 % in this proof-of-concept study. Interfacial reactions form a continuous Al–Co reaction layer, with local atomic-resolution indexing consistent with Al 13 Co 4 , together with Sm–Si-rich reaction products, while the matrix contains Sm–Co–Si-rich precipitates and Mg 2 Si, producing features from nanometers to micrometers. Compared with an Al extrudate, this architecture increases yield strength by ∼ 42 % and tensile strength by ∼ 31 %, while preserving uniform elongation, and it sustains work hardening in compression from 150 to 400 °C. The composite retained hard-magnetic behavior, with axial magnetization of 12.7 A·m 2 kg −1 at 6 T and intrinsic coercivity of 9.6 kOe. These findings demonstrate that SSE can produce Al-based load-bearing magnetic composites while preserving useful SmCo5 functionality.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Relativistic Effects in Magnetic Circular Dichroism: Restricted Magnetic Balance and Temperature Dependence

Magnetic circular dichroism of transition metal complexes and open-shell systems are challenging to simulate and analyze, mainly due to the interplay of spin–orbit couplings and finite-magnetic-field induced Zeeman effects with the complex selection rules dictated by the circularly polarized light. In this study, we introduce an ab initio relativistic two-component formalism based on the restricted magnetic-balanced Hamiltonian for simulating MCD spectra. Both homogeneous finite magnetic field and relativistic effects are included variationally in the ground state reference. Finite-field London orbitals are used to enforce the constrained gauge-origin independence in the calculation using localized atomic orbitals. Through benchmark studies of AuCl 4 – , Pt(CN) 4 2– , and Mo(CN) 8 3– , we discuss how relativistic effects are manifested in MCD for both closed-shell and open-shell molecular complexes and how the interplay between spin–orbit coupling and magnetic field modulates the MCD selection rules. Finally, an investigation on temperature-dependent MCD is carried out and compared to experiment.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗