SEARCH · Engineering Papers
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
The paper reviews principles of laser heterodyne detection for sub-doppler spectroscopy of individual infrared spectral lines. State of the art capabilities are discussed and emphasis is placed on systems using semi-conductor diode lasers or CO2 lasers as local oscillators. Finally, the benefits of sub-doppler spectroscopy are illustrated by heterodyne spectroscopy of the atmospheres of Jupiter and Venus.
Front-surface, local-oscillator radar directly compares frequency of signals reflected from front and back surfaces of coal deposits. Thickness is measured directly as frequency difference. Transmitter is frequency modulated, so thickness is computed directly from frequency difference. Because front and back reflections are detected in combination rather than separately, masking of comparatively weak back signal is less problem. Also system is not sensitive to extraneous reflections from targets between transmitting antenna and coal surface.
Four prism interferometer superposes local oscillator beam on signal beam. Position of movable prism directs incident energy in both beams out one output port. Output port is spatially separated from input ports, and there is no limitation on size of frequency difference between laser beams.
Technique is used for evaluation and characterization of materials, fluids, and biological tissue. Method eliminates problem of electrical drive pulse shape by slaving tracking generator to local oscillator of spectrum analyzer. Logic/timing generator is used to control pulse transmission and receiving sequence, pulse width, and pulse repetition rate.
A method and apparatus for increasing the signal to noise ratio of a receiving facility for coherent frequency reception by arraying receiving systems using separate antennas for each, or one antenna for all systems are presented. One system is operated with a carrier tracking loop to provide a first local oscillator frequency for the first and all other systems arrayed, with individual tracking loops in all other systems operated at IF for tracking out any phase differences due to separate group delays using an adjustable phase shifter for a second reference to compensate for different group delays in the antenna and low noise amplifier of each of the other systems. The second IF output of all systems is summed into the first system. This technique may also be used when two systems are arrayed to an antenna designed for circular or linear polarization diversity reception to effectively provide the same signal to noise ratio for both polarized signal transmission channels that would result from matched polarization. An arrangement adapted to high rate telemetry reception is disclosed. With additional components, the same arrangement is adapted to provide low rate telemetry reception as well.
A tunable infrared heterodyne radiometer (TIHR) which uses a diode laser as the local oscillator is described as well as methods for the evaluation of the excess noise characteristics of the tunable diode laser. Preliminary atmospheric absorption data taken with the TIHR are presented and show the capability of the TIHR for making the highest resolution atmospheric measurements to date.
Receiver and terminal characteristics of the Mark 3 very long baseline interferometry system are described in some detail. The Mark 3 system has 14 IF to video converters, each with built in synthesized local oscillators which have a range of 100 to 500 MHz covered in 10 kHz steps. In the normal wideband continuum mode, all 14 upper and all 14 lower sideband video outputs (each with 2 MHz bandwidth) are recorded with a total data rate of 112 Mbits/sec. In geodetic observations, two IF bands are simultaneously recorded from a dual band (5/X) receiver.
Various aspects of optical heterodyning are considered. Topics covered heterodyning throughout the electromagnetic spectrum including detectors, local oscillators, tunable diode lasers, astronomical systems, and environmental sensors, with both active and passive systems represented.
The noise characteristics of the TDL were studied for frequencies less than 20 kHz. For heterodyne applications, the high frequency ( 1 MHz) characteristics are also important. Therefore, the high frequency noise characteristics of the TDL were studied as a part of a full TDL characterization program which has been implemented for the improvement of the TDL as a local oscillator in the LHS system. It was observed that all the devices showed similar high frequency noise characteristics even though they were all constructed using different techniques. These common high frequency noise characteristics are reported.
Various aspects of optical heterodyning are covered including active and passive systems, local oscillators, tunable diode lasers, detectors and related systems.
The optical design considerations for optimization of sensitivity, tunability, and versatility of an infrared heterodyne spectrometer are discussed using the GSFC CO2 laser heterodyne spectrometer optical front end as an example. Problems related to the coherent nature of the laser local oscillator beam (e.g., interference effects at edges of optical elements and at the beam combining beamsplitter) are described and proper beamsplitter design discussed. Optimum matching to the telescope is discussed. The severe effects of large central obscuration on the coherent telescope efficiency are described and steps to partially recover the lost system sensitivity are proposed. Measurements made with the GSFC 48 inch telescope (linear obscuration rate = 0.5) and the KPNO McMathe telescope (no obscuration) are given as examples.
The current state of knowledge concerning optical heterodyne receivers is reviewed. Following a discussion of noise processes in the heterodyne receiver and the manner in which sensitivity is increased through time integration of the detected signal, an expression for the mean square signal current is derived by mixing a coherent local oscillator with a partially coherent, quasimonochromatic source. Then the manner in which the IF signal calculation can be transferred to any convenient plane in the optical front end of the receiver is demonstrated. Using these techniques, a relatively simple equation is obtained for the coherently detected signal from an extended incoherent source and applied to the heterodyne detection of an extended thermal source and to the backscatter lidar problem where the antenna patterns of both the transmitter beam and heterodyne receiver must be taken into account. Finally, the detection of a coherent source is considered and, in particular, a distant point source such as a star or laser transmitter in a long range heterodyne communications system is discussed.
A proposal to operate a two element interferometer using the 64 m and 26 m antennas of the Tidbinbilla Deep Space Station is discussed. The instrument is to be operated as a correlation interferometer, the sine and cosine products being sampled once per second and recorded for later analysis. The receiver systems are currently under development. Preliminary measurements of the delay line and local oscillator systems and the site cables suggest that a phase stability to within about 1 deg should be achievable with temperature control of the receiver packages.
The paper deals with the Pioneer Venus Orbiter (signal) occultation experiment. During Pioneer Venus Orbiter radio science operations, an open-loop receiver baseband frequency output bandwidth was substantially reduced. This was made possible by programming an open-loop receiver first local oscillator with the predicted Doppler frequency profile so as to maintain the baseband signal within a narrow receiver output bandwidth.
The concept and techniques of a Laser Heterodyne Spectrometer experiment for measuring the vertical profiles of several stratospheric trace gases are discussed. The goal of the experiment is to develop a laser heterodyne receiver capable of measuring 2-4 gases simultaneously from Spacelab and, ultimately, from free-flying platforms. Sensitivity analyses are currently being performed for tenuous molecules such as ClO, ClONO2, NOCl, HO2, H2O2, and N2O5, although the capability exists for measuring more abundant gases, such as O3, HNO3, N2O, NO2, and CH4. Results indicate that O3 and ClO vertical profiles can be measured with an accuracy equal to or better than 95% and 80%, respectively, over the total profile. Laboratory measurements of the performance characteristics of the local oscillator and heterodyne detector are discussed with reference to 'excess-noise' and Doppler-shift effects.
The reduction of the equivalent noise temperature in liquid-nitrogen-cooled submillimeter-wave mixers by the use of Schottky barriers on InSb instead of GaAs is evaluated by an analytical model that assumes limited local oscillator power and matched impedances. The calculations, executed at 1.0 and 1.8 THz, take plasma resonance and skin effect into account. For single and multiple contacts on homogeneous semiconductor materials of optimum doping, the noise of InSb diodes is smaller than that of GaAs diodes by a factor of 3 to 14. A simplified model is used to predict the performance of epitaxial structures as well as alternative materials.
Doppler and ranging data routinely generated at the Deep Space Stations of the California Institute of Technology-Jet Propulsion Laboratory Deep Space Network serve as an excellent source of radio science information. Important radio science experiments based on Deep Space Network generated radio metric data have included confirmation of Einstein's Theory of Relativity, measurement of the masses and gravitational harmonics of the planets out to Saturn, and measurement of electron density distribution and turbulence in the solar corona. In response to an increased level of radio science requirements, the Deep Space Network chose in 1976 to implement a new radio science system, which was completed in late 1978. Key features include (1) highly phase stable open loop receivers, (2) reduction of recorded data bandwidth through use of programmed local oscillators, and (3) real time digitization and recording on computer compatible tape.
Design features and performance parameters are described for three types of wideband multiple channel satellite transponders for use in a 30/20 GHz communications satellite, which provides high data rate trunking service to ten ground station terminals. The three types of transponder are frequency division multiplex (FDM), time division multiplex (TDM), and a hybrid transponder using a combination of FDM and TDM techniques. The wideband multiple beam trunking concept, the traffic distribution between the trunking terminals, and system design constraints are discussed. The receiver front end design, the frequency conversion scheme, and the local oscillator design are described including the thermal interface between the transponders and the satellite. The three designs are compared with regard to performance, weight, power, cost and initial technology. Simplified block diagrams of the baseline transponder designs are included.