Weak locally homogeneous turbulence in idealized flow through a cone.
Weak locally homogeneous turbulence in idealized distorting mean flow in cone, obtaining two point correlation equations
Deissler, R. G.↗
SEARCH · Engineering Papers
Results for “local distortion”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Air Guide for Sheet-Metal Grinder
Tool attachment reduces heat distortion of sheet. Air-guide attachment directs air from grinder motor to grinding wheel and metal sheet being ground. Cooling air reduces thermal distortion of workpiece due to localized frictional heating. Particularly useful when grinding sheet metal.
Heermann, T.↗
Investigation of the Loads on a Conventional Front and Rear Sliding Canopy
As one phase of a comprehensive canopy load investigation, conventional front and rear sliding canopies which are typified by installation on the SB2C-4E airplane, were tested in the Langley full-scale tunnel to determine the pressure distributions and the aerodynamic loads on the canopies. A preliminary analysis of the results of these tests is presented in this report. Plots are presented that show the distribution of pressure at four longitudinal stations through each canopy for a range of conditions selected to determine the effects of varying canopy position, yaw, lift coefficient, and power. The results indicate that the maximum loads, based on the external-internal pressure differential, for the front and rear canopies were obtained with the airplane simulating the high speed flight condition. The highest loading on the front canopy was in the exploding direction for the configuration with the front and rear canopies closed. The highest loads on the rear canopy were in the crushing direction with the front canopy open and the rear canopy closed. For most of the simulated flight conditions, the highest loads on the front canopy, per unit area, were over twice as great as the highest loads on the rear canopy when the comparison was made for the most critical canopy configuration in each case. The external pressure distribution over the front and rear canopies, which were fairly symmetrical to 0 degree angle of yaw, were greatly distorted at other yaw attitudes, particularly for the propeller operating conditions. These distorted pressure distributions resulted in local exploding and crushing loads on both canopies which were often considerably higher than the average canopy loads.
Dexter, Howard E.↗
Installing a Test Tap on a Metal Battery Case
A mechanical fitting and relatively simple and safe method of installing it on the metal case of a battery have been devised to provide access to the interior of the battery to perform inspection and/or to measure such internal conditions as temperature and pressure. A metal boss or stud having an exterior thread is attached to the case by capacitor-discharge stud welding (CDSW), which takes only 3 to 6 milliseconds and in which the metallurgical bond (weld) and the heat-affected zone are limited to a depth of a few thousandths of an inch (a few hundredths of a millimeter). These characteristics of CDSW prevent distortion of the case and localized internal heating that could damage the chemical components inside of the battery. An access hole is then drilled through the stud and case, into the interior of the battery. A mechanical fitting having a matching thread is installed on the stud and the interior end of the fitting is sealed with a pressure-sealing washer/gasket. The exterior end of the fitting is configured for attachment of whatever instrumentation is required for the selected inspection or measurement.
Mayes, Daniel R.↗
Nickel-rich Nickel Manganese Cobalt (NMC622) Cathode Lithiation Mechanism and Extended Cycling Effects Using Operando X-ray Absorption Spectroscopy
Ni-rich NMC materials are a particularly promising class of Li-ion cathodes for various applications. LiNi 0.6 Mn 0.2 Co 0.2 O 2 (NMC622) offers a unique balance of thermal stability and energy density, thus attracting attention for electric vehicle implementation. However, upon extended cycling, capacity fade is prevalent due to structural degradation, which is a major drawback for layered oxide cathodes. Therefore, exploring the underlying phenomena that drive detrimental structural response can lead to future improvements. For the first time, operando X-ray absorption spectroscopy (XAS) was performed on NMC622 pouch cells at three different stages. An extensive description of the first cycle (de)lithiation mechanisms was achieved through X-ray absorption near-edge structure analyses and extended X-ray absorption fine structure modeling. Transition metal specific electrochemical participation and structural variation revealed that much of the delivered capacity and distortion is a result of Ni redox behavior, while the local structure of Co and Mn are impacted due to their interdependencies. Key mechanistic components were identified, as the local structural variation from redox processes and Ni 3+ Jahn–Teller distortion were decoupled. Further, operando XAS was used to investigate the structural response of NMC622 to extended cycling and was supported by X-ray diffraction, X-ray photoelectron spectroscopy, and electrochemical impedance spectroscopy analyses. In this work, reduced capacity was found in the cell after 100 cycles and is attributed to structural degradation and cathode–electrolyte interphase buildup from repeated Li (de)insertion processes, which limit the electrochemical reversibility of Ni and Co through increased polarization. These results expand the understanding of a Ni-rich NMC material under extended cycling, which is vital to the future design of electrode materials.
25 ENERGY STORAGE↗
Comparison of the canonical transformation and energy functional formalisms for ab initio calculations of self-localized polarons
In materials with strong electron-phonon (e-ph) interactions, charge carriers can distort the surrounding lattice and become trapped, forming self-localized (small) polarons. We recently developed an ab initio approach based on canonical transformations to efficiently compute the formation and energetics of small polarons A different approach based on a Landau-Pekar energy functional has been proposed in the recent literature. Here in this work, we analyze and compare these two methods in detail. We show that the small polaron energy is identical in the two formalisms when using the same polaron wave function. We also show that our canonical transformation formalism can predict polaron band structures and can properly treat zero- and finite-temperature lattice vibration effects, although at present using a fixed polaron wave function. Conversely, the energy functional approach can compute the polaron wave function, but as we show here, it neglects lattice vibrations and cannot address polaron self-localization and thermal band narrowing. Taken together, this work relates two different methods developed recently to study polarons from first-principles, highlighting their merits and shortcomings and discussing them both in a unified formalism.
36 MATERIALS SCIENCE↗
Multiple ferroic orders and toroidal magnetoelectricity in the chiral magnet BaCoSiO 4
Discovering ferroic phase transitions and their consequential physical properties is at the core of condensed matter science due to rich physics and tremendous technological promises. BaCoSiO 4 , a chiral antiferromagnet, belongs to the tetrahedron-based chiral system, and exhibits diverse ferroic orders with coexisting chirality, polarity, trimerization, ferrorotational distortions, and magnetism. However, their mutual couplings remain to be explored. Here in this work, we used a comprehensive combination of several experimental tools—in situ x-ray, transmission electron microscopy, magnetization, and magnetoelectric measurements of single-crystalline BaCoSiO 4 —to investigate hierarchical phase transitions, their microscopic domain structures, and the resulting magnetoelectricity. We found that two different structural chiralities develop through distinct processes: global homochirality and local heterochirality induced by the ferrorotational distortions on top of existing polarization. In addition, magnetic chirality, with the simultaneous presence of net magnetic moment and magnetic toroidal moment, develops below 3.2 K due to the global chirality, which leads to magnetic field tunable toroidal magnetoelectricity. Thus, BaCoSiO 4 exhibits uniquely all four types of ferroic orders and provides an avenue to explore, for example, tunable or dynamic coupling of multiple ferroic degrees of freedom.
36 MATERIALS SCIENCE↗
First-principles calculation of lattice distortions in four single phase high entropy alloys with experimental validation
Exceptional properties of high entropy alloys (HEAs) are attributed to the disordered random solid solution of multiple alloying elements. Despite numerous studies, the fundamental understanding at the electronic and atomic levels is still missing. We report a comparative study of four fcc HEAs of NiFeCoCr and NiFeCoCrX (X = Mn, Cu, or Pd) based on ab initio calculations using large supercells with 500 atoms in equal composition. After fully optimizing their structures using the VASP package, their electronic structure, interatomic bonding, partial charge distribution, and mechanical properties are calculated and compared, revealing the intricate interdependence among them. A novel parameter based on the quantum mechanical metric for internal cohesion, the total bond order density (TBOD), is used to interpret the calculated properties. The highest TBOD is found in Cantor alloy NiFeCoCrMn but lower in NiFeCoCrPd. The atomic radii vary depending on their local chemical environment. The resulting lattice distortions is validated experimentally in NiFeCoCrMn and NiFeCoCrPd. Moreover, modeling of Cu and Pd clustering in the supercell shows they have lower total energy in agreement with the observation of Cu-enhanced nano-participates in NiFeCoCrCu and Pd-induced concentration wave in NiFeCoCrPd HEAs.
36 MATERIALS SCIENCE↗
Stressing Halide Perovskites with Light and Electric Fields
Understanding the light and electric field-induced effects underlying the local changes in optoelectronic properties in lead halide perovskites is crucial to establish a detailed structure–function relationship. Here, in this study, we use single-molecule absorption scanning tunneling microscopy (SMA-STM) to probe the local surface inhomogeneity of a mixed A-site cation/mixed halide perovskite under pulsed 532 nm photoexcitation to gain insight into the varying grain-to-grain absorption behavior at the nanoscale and reduction in the electronic bandgap under illumination. To correlate the observed changes in the absorption signal to structural ones, we utilize synchrotron X-ray STM (SX-STM) where we find that photoexcitation induces changes in the X-ray absorption spectral signatures. Lastly, using pump–probe time-resolved wide-angle X-ray scattering, we show the presence of nonthermal lattice deformations upon photoexcitation which indicate that the excited photocarriers distort the perovskite lattice, corroborating the local electronic changes observed by our STM measurements.
37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
Nanoscale degeneracy lifting in a geometrically frustrated antiferromagnet
The local atomic and magnetic structures of the compounds A MnO 2 (A = Na, Cu), which realize a geometrically frustrated, spatially anisotropic triangular lattice of Mn spins, have been investigated by atomic and magnetic pair distribution function analysis of neutron total scattering data. Relief of frustration in CuMnO 2 is accompanied by a conventional cooperative symmetry-lowering lattice distortion driven by Néel order. In NaMnO 2 , however, the distortion has a short-range nature. A cooperative interaction between the locally broken symmetry and short-range magnetic correlations lifts the magnetic degeneracy on a nanometer length scale, enabling long-range magnetic order in the Na derivative. The degree of frustration, mediated by residual disorder, contributes to the rather differing pathways to a single, stable magnetic ground state in these two related compounds. This study demonstrates how nanoscale structural distortions that cause local-scale perturbations can lift the ground-state degeneracy and trigger macroscopic magnetic order.
75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
Disorder Dynamics in Battery Nanoparticles During Phase Transitions Revealed by Operando Single-Particle Diffraction
Structural and ion-ordering phase transitions limit the viability of sodium-ion intercalation materials in grid scale battery storage by reducing their lifetime. However, the combination of phenomena in nanoparticulate electrodes creates complex behavior that is difficult to investigate, especially on the single-nanoparticle scale under operating conditions. In this work, operando single-particle X-ray diffraction (oSP-XRD) is used to observe single-particle rotation, interlayer spacing, and layer misorientation in a functional sodium-ion battery. oSP-XRD is applied to Na 2/3 [Ni 1/3 Mn 2/3 ]O 2 , an archetypal P2-type sodium-ion-positive electrode material with the notorious P2-O2 phase transition induced by sodium (de)intercalation. Here, it is found that during sodium extraction, the misorientation of crystalline layers inside individual particles increases before the layers suddenly align just prior to the P2-O2 transition. The increase in the long-range order coincides with an additional voltage plateau signifying a phase transition prior to the P2-O2 transition. To explain the layer alignment, a model for the phase evolution is proposed that includes a transition from localized to correlated Jahn-Teller distortions. The model is anticipated to guide further characterization and engineering of sodium-ion intercalation materials with P2-O2 type transitions. oSP-XRD, therefore, opens a powerful avenue for revealing complex phase behavior in heterogeneous nanoparticulate systems.
25 ENERGY STORAGE↗
Redox Mechanisms and Migration Tendencies in Earth-Abundant 0.7Li 2 MnO 3 ·0.3LiFeO 2 Cathodes: Coupling Spin-Resolved X-ray Absorption Near Edge and X-ray Absorption Fine Structure Spectroscopies
We report the use of iron 1s3p resonant X-ray emission processes to conduct spin-selective, high-energy resolution fluorescence detected X-ray absorption near-edge spectroscopy (HERFD-XANES) on an iron-containing, lithium- and manganese-rich, fully earth-abundant cathode material, Li 1.3 Mn 0.5 Fe 0.2 O 2 (0.7Li 2 MnO 3 ·0.3LiFeO 2 ). Coupling this technique with conventional Mn K-edge XANES and detailed extended X-ray absorption fine structure (EXAFS) analysis from both the Mn and Fe vantage points, we gain fundamental insights into the redox processes and migration tendencies of transition metals in this cathode material at the bulk level. We show that during the first charge, Fe 3+ undergoes oxidation to form Fe 4+ prior to the activation plateau. Toward the end of activation, a significant fraction of the iron is present as tetrahedral Fe 3+ . This observation reveals that iron migration from octahedral to tetrahedral sites and iron reduction are initiated during activation. Upon first discharge from the activated state, a continuous and overlapping reduction of both Fe and Mn is observed, with Fe largely restored back as an octahedrally coordinated Fe 3+ . The manganese local environment gradually changes to a distorted cooperative Jahn–Teller Mn 3+ structure during discharge, with the clear presence of two Mn–O as well as two Mn–Mn correlation distances at 2.0 V. The significant reduction of manganese in the very first discharge is distinctly different from that seen in typical nickel-based lithium-manganese-rich materials but is similar to that observed for pure Li 2 MnO 3 . In conclusion, these findings shed light on key structure–property correlations in the cathode material and point to a causative relationship between the redox mechanisms as well as structural changes endured by the material and relatively poor performance during extended electrochemical cycling.
37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
Stabilizing lattice oxygen redox in layered sodium transition metal oxide through spin singlet state
Abstract Reversible lattice oxygen redox reactions offer the potential to enhance energy density and lower battery cathode costs. However, their widespread adoption faces obstacles like substantial voltage hysteresis and poor stability. The current research addresses these challenges by achieving a non-hysteresis, long-term stable oxygen redox reaction in the P3-type Na 2/3 Cu 1/3 Mn 2/3 O 2 . Here we show this is accomplished by forming spin singlet states during charge and discharge. Detailed analysis, including in-situ X-ray diffraction, shows highly reversible structural changes during cycling. In addition, local CuO 6 Jahn-Teller distortions persist throughout, with dynamic Cu-O bond length variations. In-situ hard X-ray absorption and ex-situ soft X-ray absorption study, along with density function theory calculations, reveal two distinct charge compensation mechanisms at approximately 3.66 V and 3.99 V plateaus. Notably, we observe a Zhang-Rice-like singlet state during 3.99 V charging, offering an alternative charge compensation mechanism to stabilize the active oxygen redox reaction.
25 ENERGY STORAGE↗
Accurate prediction of oxygen vacancy concentration with disordered A-site cations in high-entropy perovskite oxides
Abstract Entropic stabilized ABO 3 perovskite oxides promise many applications, including the two-step solar thermochemical hydrogen (STCH) production. Using binary and quaternary A-site mixed {A}FeO 3 as a model system, we reveal that as more cation types, especially above four, are mixed on the A-site, the cell lattice becomes more cubic-like but the local Fe–O octahedrons are more distorted. By comparing four different Density Functional Theory-informed statistical models with experiments, we show that the oxygen vacancy formation energies ( $${E}_{V}^{f}$$ E V f ) distribution and the vacancy interactions must be considered to predict the oxygen non-stoichiometry ( δ ) accurately. For STCH applications, the $${E}_{V}^{f}$$ E V f distribution, including both the average and the spread, can be optimized jointly to improve Δ δ (difference of δ between the two-step conditions) in some hydrogen production levels. This model can be used to predict the range of water splitting that can be thermodynamically improved by mixing cations in {A}FeO 3 perovskites.
08 HYDROGEN↗
Structural properties of PbTe quantum dots revealed by high-energy x-ray diffraction
High-energy x-ray diffraction (HE-XRD) experiments combined with an analysis based on atomic-pair-distribution functions can be an effective tool for probing low-dimensional materials. Here, we show how such an analysis can be used to gain insight into structural properties of PbTe nanoparticles (NPs). Here we interpret our HE-XRD data using an orthorhombic Pnma phase of PbTe, which is an orthorhombic distortion of the rocksalt phase. Although local crystal geometry can vary substantially with particle size at scales below 10 nm, and for very small NPs the particle size itself influences x-ray diffraction patterns, our study shows that HE-XRD can provide a unique nano-characterization tool for unraveling structural properties of nanoscale systems.
71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
Orbital-selective Peierls phase in the metallic dimerized chain MoOCl 2
Using ab initio density functional theory, here we systematically study the monolayer MoOCl 2 with a 4 d 2 electronic configuration. Our main result is that an orbital-selective Peierls phase (OSPP) develops in MoOCl 2 , resulting in the dimerization of the Mo chain along the b axis. Specifically, the Mo- d x y orbitals form robust molecular-orbital states inducing localized d x y singlet dimers, while the Mo- d x z / y z orbitals remain delocalized and itinerant. Our study shows that MoOCl 2 is globally metallic, with the Mo- d x y orbital bonding-antibonding splittings opening a gap and the Mo- d x z / y z orbitals contributing to the metallic conductivity. Overall, the results resemble the recently much discussed orbital-selective Mott phase but with the localized band induced by a Peierls distortion instead of Hubbard interactions. Finally, we also qualitatively discuss the possibility of OSPP in the 3 d 2 configuration, as in CrOCl 2 .
1-dimensional systems↗
Quantitative approaches for multiscale structural analysis with atomic resolution electron microscopy
Atomic-resolution imaging with scanning transmission electron microscopy is a powerful tool for characterizing the nanoscale structure of materials, in particular features such as defects, local strains, and symmetry-breaking distortions. In addition to advanced instrumentation, the effectiveness of the technique depends on computational image analysis to extract meaningful features from complex datasets recorded in experiments, which can be complicated by the presence of noise and artifacts, small or overlapping features, and the need to scale analysis over large representative areas. Here, we present image analysis approaches which synergize real and reciprocal space information to efficiently and reliably obtain meaningful structural information with picometer scale precision across hundreds of nanometers of material from atomic-resolution electron microscope images. Damping superstructure peaks in reciprocal space allows symmetry-breaking structural distortions to be disentangled from other sources of inhomogeneity and measured with high precision. Real-space fitting of the wavelike signals resulting from Fourier filtering enables absolute quantification of lattice parameter variations and strain, as well as the uncertainty associated with these measurements. Implementations of these algorithms are made available as an open source python package.
36 MATERIALS SCIENCE↗
A deployable structure and solar array controls experiment for STEP
A candidate configuration for a controls experiment on the Space Technology Experiments Platform (STEP) is described. The elements of the experiment are the mast, the solar array, and an articulation module between the two. The characteristic dimensions are very compatible for integration on a pallet such a STEP's proposed configuration. The controls' objective would be the measurement of orbiter interaction as well as the system identification of the appendages. The flight experiment configuration would also provide a test bed for various active vibration controls concepts. The instrumentation being considered would measure accelerations, strains, displacements, and temperatures. The deployable mast has eight elements defining a structural bay. Uniaxial measurements would be required to define loads at a cross section of the structure. Displacements due to thermal distortion of the mast and the local state of the solar concentrator may be measured by an optical ranging technique from the orbiter aft flight deck.
Nishimoto, T. S.↗