SEARCH · Engineering Papers

Results for “linearity”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 271 records · Page 15

All sources NASA NTRS DOE OSTI

NASA NTRS1975

Numerical techniques for the linear, nonadiabatic stellar pulsation problem

The linear, nonadiabatic eigenvalue problem is formulated using Castor's method for calculating radial pulsations of stellar models. Both left and right eigenvectors are calculated. Initial eigenvalues for the linear, nonadiabatic solutions are obtained from the adiabatic eigenvalues and left and right eigenvectors. The orthogonality relation is obtained. Simple formulas for the Newton method are given. The iteration procedure is constrained to improve convergence. The Newton method is less satisfactory than the secant method for difficult cases. The linear, nonadiabatic solutions are shown to be sensitive to the number of zones with tau smaller than 2/3, and the value of (P/P sub r) surface or tau (surface). Optimum values can be determined for the number of zones and tau (surface). Application of the method to Population II Cepheids is briefly presented.

Bednarek, T. A.↗

NASA NTRS1975

Computation of output feedback gains for linear stochastic systems using the Zangnill-Powell Method

Because conventional optimal linear regulator theory results in a controller which requires the capability of measuring and/or estimating the entire state vector, it is of interest to consider procedures for computing controls which are restricted to be linear feedback functions of a lower dimensional output vector and which take into account the presence of measurement noise and process uncertainty. To this effect a stochastic linear model has been developed that accounts for process parameter and initial uncertainty, measurement noise, and a restricted number of measurable outputs. Optimization with respect to the corresponding output feedback gains was then performed for both finite and infinite time performance indices without gradient computation by using Zangwill's modification of a procedure originally proposed by Powell. Results using a seventh order process show the proposed procedures to be very effective.

Kaufman, H.↗

NASA NTRS1975

An algorithm for optimal single linear feature extraction from several Gaussian pattern classes

A computational algorithm is presented for the extraction of an optimal single linear feature from several Gaussian pattern classes. The algorithm minimizes the increase in the probability of misclassification in the transformed (feature) space. Numerical results on the application of this procedure to the remotely sensed data from the Purdue Cl flight line as well as LANDSAT data are presented. It was found that classification using the optimal single linear feature yielded a value for the probability of misclassification on the order of 30% less than that obtained by using the best single untransformed feature. Also, the optimal single linear feature gave performance results comparable to those obtained by using the two features which maximized the average divergence.

Starks, S. A.↗

NASA NTRS1976

Breadboard linear array scan imager using LSI solid-state technology

The performance of large scale integration photodiode arrays in a linear array scan (pushbroom) breadboard was evaluated for application to multispectral remote sensing of the earth's resources. The technical approach, implementation, and test results of the program are described. Several self scanned linear array visible photodetector focal plane arrays were fabricated and evaluated in an optical bench configuration. A 1728-detector array operating in four bands (0.5 - 1.1 micrometer) was evaluated for noise, spectral response, dynamic range, crosstalk, MTF, noise equivalent irradiance, linearity, and image quality. Other results include image artifact data, temporal characteristics, radiometric accuracy, calibration experience, chip alignment, and array fabrication experience. Special studies and experimentation were included in long array fabrication and real-time image processing for low-cost ground stations, including the use of computer image processing. High quality images were produced and all objectives of the program were attained.

Tracy, R. A.↗

NASA NTRS1975

Perception of linear horizontal self-motion induced by peripheral vision /linearvection/ - Basic characteristics and visual-vestibular interactions

The basic characteristics of the sensation of linear horizontal motion have been studied. Objective linear motion was induced by means of a moving cart. Visually induced linear motion perception (linearvection) was obtained by projection of moving images at the periphery of the visual field. Image velocity and luminance thresholds for the appearance of linearvection have been measured and are in the range of those for image motion detection (without sensation of self motion) by the visual system. Latencies of onset are around 1 sec and short term adaptation has been shown. The dynamic range of the visual analyzer as judged by frequency analysis is lower than the vestibular analyzer. Conflicting situations in which visual cues contradict vestibular and other proprioceptive cues show, in the case of linearvection a dominance of vision which supports the idea of an essential although not independent role of vision in self motion perception.

Berthoz, A.↗

NASA NTRS1976

Linear minimum variance filters applied to carrier tracking

A new approach is taken to the problem of tracking a fixed amplitude signal with a Brownian-motion phase process. Classically, a first-order phase-lock loop (PLL) is used; here, the problem is treated via estimation of the quadrature signal components. In this space, the state dynamics are linear with white multiplicative noise. Therefore, linear minimum-variance filters, which have a particularly simple mechanization, are suggested. The resulting error dynamics are linear at any signal/noise ratio, unlike the classical PLL. During synchronization, and above threshold, this filter with constant gains degrades by 3 per cent in output rms phase error with respect to the classical loop. However, up to 80 per cent of the maximum possible noise improvement is obtained below threshold, where the classical loop is nonoptimum, as demonstrated by a Monte Carlo analysis. Filter mechanizations are presented for both carrier and baseband operation.

Gustafson, D. E.↗

NASA NTRS1976

Characterizations of linear sufficient statistics

A necessary and sufficient condition is developed such that there exists a continous linear sufficient statistic T for a dominated collection of totally finite measures defined on the Borel field generated by the open sets of a Banach space X. In particular, corollary necessary and sufficient conditions are given so that there exists a rank K linear sufficient statistic T for any finite collection of probability measures having n-variate normal densities. In this case a simple calculation, involving only the population means and covariances, determines the smallest integer K for which there exists a rank K linear sufficient statistic T (as well as an associated statistic T itself).

Peters, B. C., Jr.↗

NASA NTRS1976

Linearized blade row compression component model. Stability and frequency response analysis of a J85-3 compressor

NASA developed stability and frequency response analysis techniques were applied to a dynamic blade row compression component stability model to provide a more economic approach to surge line and frequency response determination than that provided by time-dependent methods. This blade row model was linearized and the Jacobian matrix was formed. The clean-inlet-flow stability characteristics of the compressors of two J85-13 engines were predicted by applying the alternate Routh-Hurwitz stability criterion to the Jacobian matrix. The predicted surge line agreed with the clean-inlet-flow surge line predicted by the time-dependent method to a high degree except for one engine at 94% corrected speed. No satisfactory explanation of this discrepancy was found. The frequency response of the linearized system was determined by evaluating its Laplace transfer function. The results of the linearized-frequency-response analysis agree with the time-dependent results when the time-dependent inlet total-pressure and exit-flow function amplitude boundary conditions are less than 1 percent and 3 percent, respectively. The stability analysis technique was extended to a two-sector parallel compressor model with and without interstage crossflow and predictions were carried out for total-pressure distortion extents of 180 deg, 90 deg, 60 deg, and 30 deg.

Tesch, W. A.↗

NASA NTRS1977

Linear tracking systems with applications to aircraft control system design

A class of optimal linear time invariant tracking systems, both in continuous time and discrete time, of which the number of inputs (which are restricted to be step functions) is equal to the number of system outputs, is studied. Along with derivation of equations and design procedures, two discretization schemes are presented, constraining either the control or its time derivative, to be a constant over each sampling period. Descriptions are given for the linearized model of the F-8C aircraft longitudinal dynamics, and the C* handling qualities criterion, which then serve as an illustration of the applications of these linear tracking designs. A suboptimal reduced state design is also presented. Numerical results are given for both the continuous time and discrete time designs.

Lee, W. H.↗

NASA NTRS1977

Non-linear analysis of vibrations of irregular plates

A numerical perturbation method is used to investigate the forced vibrations of irregular plates. Nonlinear terms associated with the midplane stretching are retained in the analysis. The numerical part of the method involves the use of linear, finite element techniques to determine the free oscillation mode shapes and frequencies and to obtain the linear midplane stress resultants caused by the midplane stretching. Representing the solution as an expansion in terms of these linear mode shapes, these modes and the resultants are used to determine the equations governing the time-dependent coefficients of this expansion. These equations are solved by using the method of multiple scales. Specific solutions are given for the main-resonant vibrations of an elliptical plate in the presence of internal resonances. The results indicate that modes other than the driven mode can be drawn into the steady state response. Though the excitation is composed of a single harmonic, the response may not be periodic. Moreover, the particular types of responses that can occur are highly dependent on the mode being excited and are sensitive to small geometrical changes.

Lobitz, D. W.↗

NASA NTRS1977

Perfect decoupling of linear systems with discrete parameter uncertainties

A design procedure based on Gilbert's decoupling parameters for determining a fixed state feedback control law which decouples a linear system with discrete parameter uncertainties is described. Perfect decoupling conditions are established which involve a test for the existence of a solution to a system of linear equations. An actual solution of the linear equations yields the decoupling control law.

Dorato, P.↗

NASA NTRS1977

Decentrally stabilizable linear and bilinear large-scale systems

Two classes of large-scale systems are identified, which can always be stabilized by decentralized feedback control. For the class of systems composed of interconnected linear subsystems, we can choose local controllers for the subsystems to achieve stability of the overall system. The same linear feedback scheme can be used to stabilize a class of linear systems with bilinear interconnections. In this case, however, the scheme is used to establish a finite region of stability for the overall system. The stabilization algorithm is applied to the design of a control system for the Large-Space Telescope.

Siljak, D. D.↗

NASA NTRS1977

Comparison of linear inversion methods by examination of the duality between iterative and inverse matrix methods

Linear numerical inversion methods applied to atmospheric remote sounding generally can be categorized in two ways: (1) iterative, and (2) inverse matrix methods. However, these two categories are not unrelated; a duality exists between them. In other words, given an iterative scheme, a corresponding inverse matrix method exists, and conversely. This duality concept is developed for the more familiar linear methods. The iterative duals are compared with the classical linear iterative approaches and their differences analyzed. The importance of the initial profile in all methods is stressed. Calculations using simulated data are made to compare accuracies and to examine the dependence of the solution on the initial profile.

Fleming, H. E.↗

NASA NTRS1978

Procedures for generation and reduction of linear models of a turbofan engine

A real time hybrid simulation of the Pratt & Whitney F100-PW-F100 turbofan engine was used for linear-model generation. The linear models were used to analyze the effect of disturbances about an operating point on the dynamic performance of the engine. A procedure that disturbs, samples, and records the state and control variables was developed. For large systems, such as the F100 engine, the state vector is large and may contain high-frequency information not required for control. This, reducing the full-state to a reduced-order model may be a practicable approach to simplifying the control design. A reduction technique was developed to generate reduced-order models. Selected linear and nonlinear output responses to exhaust-nozzle area and main-burner fuel flow disturbances are presented for comparison.

Seldner, K.↗

NASA NTRS1978

DYGABCD: A program for calculating linear A, B, C, and D matrices from a nonlinear dynamic engine simulation

A digital computer program, DYGABCD, was developed that generates linearized, dynamic models of simulated turbofan and turbojet engines. DYGABCD is based on an earlier computer program, DYNGEN, that is capable of calculating simulated nonlinear steady-state and transient performance of one- and two-spool turbojet engines or two- and three-spool turbofan engines. Most control design techniques require linear system descriptions. For multiple-input/multiple-output systems such as turbine engines, state space matrix descriptions of the system are often desirable. DYGABCD computes the state space matrices commonly referred to as the A, B, C, and D matrices required for a linear system description. The report discusses the analytical approach and provides a users manual, FORTRAN listings, and a sample case.

Geyser, L. C.↗

NASA NTRS1977

Computation of output feedback gains for linear stochastic systems using the Zangwill-Powell method

Kaufman, H.↗

NASA NTRS1977

Non-linear duct acoustics and its application to fan noise

Quite often the scalar Helmholtz equation is assumed to be the fundamental equation of duct acoustics and various relations are derived from it. An investigation is, therefore, conducted regarding the underlying assumptions leading to the Helmholtz equation. It is found that serious errors, even well below 186 dB, are possible if the assumption of linearity were to be made. In duct acoustics these errors are highest near the cutoff points and in the case of ducts with transonic flow. It is pointed out that serious errors could arise if a nonlinear problem is analyzed by linear methods. At times, an entire phenomenon remains unpredictable by linear methods. Attention is given to the characteristics of nonlinear systems, the phenomenon of multiple pure tones in the case of noise from the aircraft engine fans, the limitations of the conventional acoustics equation, duct shape and nonlinearity, and the numerical simulation of a fan with 8 blades.

Vaidya, P. G.↗

NASA NTRS1978

A temporary threshold shift for self-motion detection following sustained, oscillating linear acceleration

Thresholds for detecting linear motion (self-motion) increased following exposure of human observers to sustained linear oscillation (fatiguing stimulus) at 0.26 Hz and approximately 0.5 G peak-to-peak for durations up to 30 min. Recovery to preexposure levels took place over a period of 10 to 15 min following the sustained oscillation termination. Differences in threshold shift magnitudes following sustained oscillation in various orientations support the interpretation that the observed threshold shifts resulted from fatigue of the utricular otolith receptors. Threshold shifts were not obtained following exposure of the human observers to sustained, unidirectional linear acceleration (2G) for durations up to 10 min with a centrifuge. The results of this study suggest a previously unobserved response property of the otolith organs, namely, that these organs can be fatigued in a manner analogous to other receptor systems.

Parker, D. E.↗