Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “insertion”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 271 records · Page 15

Enhanced electrical transparency by ultra-thin LaAlO 3 insertion at oxide metal/semiconductor heterointerfaces

We demonstrate that the electrical conductivity of metal/semiconductor oxide heterojunctions can be increased over 7 orders of magnitude by inserting an ultrathin layer of LaAlO 3 . This counterintuitive result, that an interfacial barrier can be driven transparent by inserting a wide-gap insulator, arises from the large internal electric field between the two polar LaAlO 3 surfaces. In conclusion, this field modifies the effective band offset in the device, highlighting the ability to design the electrostatic boundary conditions with atomic precision.

interface dipole↗

Watching a double strand break repair polymerase insert a pro-mutagenic oxidized nucleotide

Oxidized dGTP (8-oxo-7,8-dihydro-2´-deoxyguanosine triphosphate, 8-oxodGTP) insertion by DNA polymerases strongly promotes cancer and human disease. How DNA polymerases discriminate against oxidized and undamaged nucleotides, especially in error-prone double strand break (DSB) repair, is poorly understood. High-resolution time-lapse X-ray crystallography snapshots of DSB repair polymerase μ undergoing DNA synthesis reveal that a third active site metal promotes insertion of oxidized and undamaged dGTP in the canonical anti-conformation opposite template cytosine. The product metal bridged O8 with product oxygens, and was not observed in the syn-conformation opposite template adenine (A t ). Rotation of A t into the syn-conformation enabled undamaged dGTP misinsertion. Exploiting metal and substrate dynamics in a rigid active site allows 8-oxodGTP to circumvent polymerase fidelity safeguards to promote pro-mutagenic double strand break repair.

59 BASIC BIOLOGICAL SCIENCES↗

Hybrid dynamic windows using reversible metal electrodeposition and ion insertion

Dynamic windows with electronically controlled transmission reduce glare without obstructing views while increasing the energy efficiency of buildings and automobiles via lighting, heating and cooling savings. Electrochromic materials, which change colour with voltage, are widely explored for use in dynamic windows, but they have not been extensively commercialized due to problems associated with colour, cost, switching speed and durability. Here, we develop a class of dynamic windows that combines reversible metal electrodeposition with ion insertion chemistry. These devices function through the reversible electroplating of Bi and Cu at the working electrode and Li+ insertion in a nickel oxide counter electrode. In one minute, 100 cm 2 windows uniformly switch between a clear state with 75% transmission and a colour-neutral black state possessing 10% transmission, which represents a significant improvement over previous metal-based architectures. We demonstrate that these hybrid windows cycle at least 4,000 times without degradation and are compatible with flexible substrates. Finally, we discuss how this approach can be used to design practical large-scale windows.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

A heterogeneous iridium single-atom-site catalyst for highly regioselective carbenoid O–H bond insertion

Transition-metal-catalysed carbenoid insertion of hydroxyl groups represents a robust and versatile method to forge C–O bonds. Achieving site-selective functionalization of alcohols using this transformation has undoubted synthetic value but remains challenging. Here we report a strategy for selective carbenoid O–H insertion that exploits an engineered heterogeneous iridium single-atom catalyst, thus providing opportunities for organic transformations by merging material science and catalysis. This catalytic protocol delivers excellent selectivities (up to 99:1) for the functionalization of aliphatic over phenolic O–H bonds, whereas the analogous homogeneous catalyst, Ir(ttp)COCl (ttp = 5,10,15,20-tetra-p-tolylporphyrinato), provided modest preferences. Density-functional-theory calculations suggest that the site-selectivity derives from the lower oxidation state of the iridium metal centre in the heterogeneous catalyst and its impact on the absorption energies of the reactants. These results showcase an example of a heterogeneous single-atom catalyst providing superior site-selectivity and provide a complementary strategy to address challenges in catalysis for organic synthesis. [Figure not available: see fulltext.]

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

A smart strategy to fabricate Ru nanoparticle inserted porous carbon nanofibers as highly efficient levulinic acid hydrogenation catalysts

Herein, we first put forward a smart strategy to in situ fabricate Ru nanoparticle (NP) inserted porous carbon nanofibers by one-pot conversion of Ru-functionalized metal organic framework fibers. Such fiber precursors are skillfully constructed by cooperative assembly of different proportional RuCl3 and Zn(Ac)2·2H2O along with trimesic acid (H3BTC) in the presence of N,N-dimethylformamide. The following high-temperature pyrolysis affords uniform and evenly dispersed Ru NPs (ca. 12-16 nm), which are firmly inserted into the hierarchically porous carbon nanofibers formed simultaneously. The resulting Ru-carbon nanofiber (Ru-CNF) catalysts prove to be active towards the liquid-phase hydrogenation of levulinic acid (LA) to γ-valerolactone (GVL), a biomass-derived platform molecule with wide applications in the preparation of renewable chemicals and liquid transportation fuels. The optimal GVL yield of 96.0% is obtained, corresponding to a high activity of 9.23 molLAh–1gRu–1, 17 times of that using the commercial Ru/C catalyst. Moreover, the Ru-CNF catalyst is extremely stable, and can be cycled up to 7 times without significant loss of reactivity. Our strategy demonstrated here reveals new possibilities to make proficient metal catalysts, and provides a general way to fabricate metal-carbon nanofiber composites available for other applications.

36 MATERIALS SCIENCE↗

Facile Insertion of Ethylene into a Group 14 Element-Carbon Bond: Effects of the HOMO-LUMO Energy Gap on Reactivity

The diarylstannylenes, Sn(Ar iPr 4 ) 2 and Sn(Ar iPr 6 ) 2 , (Ar iPr 4 = C 6 H 3 -2,6-(C 6 H 3 -2,6- i Pr 2 ) 2 , Ar iPr 6 = C 6 H 3 -2,6-(C 6 H 2 -2,4,6- i Pr 3 ) 2 ), undergo a facile migratory insertion reaction with ethylene at 60 °C to afford the alkyl aryl stannylenes Ar iPr 4 SnCH 2 CH 2 Ar iPr 4 and Ar iPr 6 SnCH 2 CH 2 Ar iPr 6 which were characterized via 1 H, 13 C and 119 Sn NMR, UV-vis and IR spectroscopy, as well as by X-ray crystallography. In this work, quantum mechanical calculations were performed, and two potential mechanisms were identified, with a migratory insertion reaction pathyway being energetically preferred.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Nanoribbons or weakly connected acenes? The influence of pyrene insertion on linearly extended ring systems

Derived from the lateral fusion of benzene rings, acenes are a class of π-conjugated molecules containing a single aromatic sextet, where system size is inversely correlated with chemical stability. In the pursuit of creating graphene nanoribbons/nanowires, several extended-ring structures have been synthesized through linear combinations of azaacenes and pyrene. Importantly, these extended systems demonstrate enhanced chemical stability and allow for the construction of macromolecular-sized structures. In this report we present a combined quantum-chemical and experimental study to reveal the cost of these improved characteristics in fully carbon-based systems. The results clearly show that pyrene moieties inserted among acene units do not result in long acene-like structures, rather the pyrene-inserted acene is, electronically, a series of (nearly) isolated acenes. The origin of pyrene's electronic blocking effect and implications on oxidized and photoexcited states of these extended-ring systems are detailed. The results of this investigation definitively show that coupling pyrene in an orthogonal orientation (through the 4, 5/9, 10 positions or e/l faces) to acenes should be eschewed if nanographene-/nanowire-like structures are desired.

36 MATERIALS SCIENCE↗

TEMPO: a New Insertion Device Beamline at SOLEIL for Time Resolved Photoelectron Spectroscopy Experiments on Solids and Interfaces

A new insertion device beamline is now operational on straight section 8 at the SOLEIL synchrotron radiation source in France. The beamline and the experimental station were developed to optimize the study of the dynamics of electronic and magnetic properties of materials. Here we present the main technical characteristics of the installation and the general principles behind them. The source is composed of two APPLE II type insertion devices. The monochromator with plane gratings and spherical mirrors is working in the energy range 40-1500 eV. It is equipped with VLS, VGD gratings to allow the user optimization of flux or higher harmonics rejection. The observed resonance structures measured in gas phase enable us to determine the available energy resolution: a resolving power higher than 10000 is obtained at the Ar 2p, N 1s and Ne K-edges when using all the optical elements at full aperture. The total flux as a function of the measured photon energy and the characterization of the focal spot size complete the beamline characterization.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

A panoply of insertion devices at SOLEIL for a wide spectral range and flexible polarisation

The SOLEIL storage ring presents a very high fraction of its circumference dedicated to accommodate Insertion Devices (ID). Over the 25 presently planned insertion devices presenting a large variety of systems, 16 have been already installed and commissioned in September 2009. The UV-VUV region is covered with electromagnetic devices, offering tuneable polarisations. An electromagnet/permanent magnet undulator using copper sheets coils for fast switching of the helicity is under construction. 13 APPLE-II type undulators, with period ranging from 80 down to 36 mm, provide photons in the 0.1-10 keV region, some of them featuring tapering or quasi-periodicity. Five U20 in vacuum undulators cover typically the 3-30 keV range whereas an in vacuum wiggler, with compensation of the magnetic forces via adequate springs will cover the 10-50 keV spectral domain. R and D on cryogenic in-vacuum undulator is also under progress. A magnetic chicane using permanent magnet dipoles has also been designed in order to accommodate two canted undulators on the same straight section. A wiggler dedicated to slicing (production of femto second long pulses) is also being designed, its radiation will also serve for an X-ray beamline.

43 PARTICLE ACCELERATORS↗

Insertion of an organic interlayer for hole current enhancement in inverted organic light emitting devices

We report the enhancement of hole current density in the hole transport part of an inverted top-emission organic light emitted diode by applying an organic insertion layer of 1,4,5,8,9,11-hexaazatriphenylene-hexacarbonitrile (HAT-CN). Poor hole transporting performance of Al/4,4{sup '}-bis(N-phenyl-1-naphthylamino)biphenyl (NPB)/indium tin oxide is greatly improved by the HAT-CN insertion between Al and NPB layer. The highest occupied molecular orbital level onset of the NPB bends toward Fermi level at the HAT-CN/NPB interface. This extra charge generation layer made of pure organic molecules substantially enhances hole injection from Al anode as revealed by the results of ultraviolet photoelectron spectroscopy and J-V measurement data.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

A double bend achromat lattice for the Pohang Light Source to reduce emittance and increase number of insertion devices

The Pohang Light Source (PLS) storage ring is a synchrotron light source with the emittance of 18.9 nm at 2.5 GeV and has delivered vacuum ultraviolet and soft x-rays during the past 15 years. We investigate a lattice design for the 3 GeV ring for an upgrade project that keeps the existing tunnel. We investigate a double bend achromat (DBA) structure that provides the reduction of emittance by a factor of 3 and the increase of the number of straight section by a factor of 2 than the existing PLS lattice. We present several characteristics on the beam dynamics, dynamic aperture, and optics matching in the low-emittance lattice which includes squeezed space between magnets. Present PLS lattice has 12 long straight sections of 6.8 m long and the lattice is modified to provide the additional 12 short straight sections of 3.7 m long by eliminating a bending magnet in the middle of the cell of the present triplet bending achromat lattice. Thus, the new lattice consists of a total of 24 straight sections that consist of 12x6.8 and 12x3.7 m long straight sections, which can provide the spaces for the 4- and 2-m-long insertion devices. We present the design results in detail for a DBA lattice in 281.82 m long circumference. It is shown that the emittance of 6.2 nm in the lattice can be achieved by allowing nonzero dispersions in the straight sections. The lattice provides high brilliance at the photon energy of a few 10 keV that meets the requirements by synchrotron radiation users; however, it may require a strong focusing and become sensitive to machine errors and effects of insertion devices. Thus, we investigated the dynamic aperture in the lattice by a simulation method and achieved an optimal tune under the strength of sextupole magnets of 500 T/m{sup 2} for the low-emittance ring. We also performed the lattice tunings to restore the optics due to the errors in the low-emittance ring. In result, our designed lattice shows a good optimization in terms of emittance, brilliance, and circumference as a light source for a 3 GeV.

43 PARTICLE ACCELERATORS↗

Driving vertical phase separation in a bulk-heterojunction by inserting a poly(3-hexylthiophene) layer for highly efficient organic solar cells

A desirable vertical phase separation of a bulk-heterojunction was achieved by inserting a P3HT layer between the blend layer and the poly(3,4-ethylenedioxythiophene) poly(styrenesulfonate) (PEDOT:PSS) layer. According to the high (PEDOT:PSS) and low (P3HT) surface energies of substrate, it might be possible to modulate the vertical phase separation in the bulk-heterojunction. The result of vertical phase separation was determined using time-of-flight secondary-ion mass spectroscopy analysis. A controlled thickness of 50 nm for the inserted P3HT layer prevented undesirable light absorption and the power conversion efficiency of this condition was increased by 44% compared to that of a reference device.

36 MATERIALS SCIENCE↗

Adhesion strength of sputtered TiAlN-coated WC insert tool

The adhesion strength of TiAlN coating that deposited by using DC magnetron sputtering on WC insert tool are studied. TiAlN coating are deposited on Tungsten Carbide (WC) insert tool by varying negatively substrate bias from 79 to 221 volt and nitrogen flow rate from 30 to 72 sccm. The adhesion strength are obtained by using Rockwell indentation test method with a Brale diamond at applied load of 60,100 and 150 kgf. The lateral diameter of indentation is plotted on three different applied loads and the adhesion strength of TiAlN coating was obtained from the curved slopes at 100 and 150 kgf. The lower curve slop indicated better adhesion strength. The results shows that the adhesion strength of sputterred TiAlN coating tend to increase as the negatively substrate bias and nitrogen flow rate are increased.

36 MATERIALS SCIENCE↗

Selective area growth and characterization of GaN nanocolumns, with and without an InGaN insertion, on semi-polar (11–22) GaN templates

The aim of this work is the selective area growth (SAG) of GaN nanocolumns, with and without an InGaN insertion, by molecular beam epitaxyon semi-polar (11–22) GaN templates. The high density of stacking faults present in the template is strongly reduced after SAG. A dominant sharp photoluminescence emission at 3.473 eV points to high quality strain-free material. When embedding an InGaN insertion into the ordered GaN nanostructures, very homogeneous optical properties are observed, with two emissions originating from different regions of each nanostructure, most likely related to different In contents on different crystallographic planes.

36 MATERIALS SCIENCE↗

Schottky barrier height reduction for metal/n-InP by inserting ultra-thin atomic layer deposited high-k dielectrics

Fermi level pinning at metal/n-InP interface and effective Schottky barrier height (Φ{sub B,eff}) were optimized by inserting ultrathin dielectrics in this work. Comparing the inserted monolayer and bilayer high-k dielectrics, we demonstrated that the introduction of bilayer dielectrics can further reduce Φ{sub B,eff} (from 0.49 eV to 0.22 eV) than the monolayer dielectric (from 0.49 eV to 0.32 eV) even though the overall dielectric thickness was thicker. The additional dipole formed at high-k/high-k interfaces could be used to expound the mechanism. This work proposed an effective solution to reduce resistance contacts for InP based transistors and Schottky barrier transistors.

36 MATERIALS SCIENCE↗

Design parameters and commissioning of vertical inserts used for testing the XFEL superconducting cavities

The European XFEL is a new research facility currently under construction at DESY in the Hamburg area in Germany. From 2015 on, it will generate extremely intense X-ray flashes that will be used by researchers from all over the world. The superconducting XFEL linear accelerator consists of 100 accelerator modules with more than 800 RF-cavities inside. The accelerator modules, superconducting magnets and cavities will be tested in the accelerator module test facility (AMTF). This paper gives an overview of the design parameters and the commissioning of the vertical insert, used in two cryostats (XATC) of the AMTF-hall. The Insert serves as a holder for 4 nine-cell cavities. This gives the possibility to cool down 4 cavities to 2K in parallel and, consequently, to reduce the testing time. The following RF measurement, selected as quality check, will be done separately for each cavity. Afterwards the cavities will be warmed up again and will be sent to the accelerator module assembly.

43 PARTICLE ACCELERATORS↗