Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “injection rate”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 271 records · Page 15

Conceptual design study of an improved gas turbine powertrain

The conceptual design for an improved gas turbine (IGT) powertrain and vehicle was investigated. Cycle parameters, rotor systems, and component technology were reviewed and a dual rotor gas turbine concept was selected and optimized for best vehicle fuel economy. The engine had a two stage centrifugal compressor with a design pressure ratio of 5.28, two axial turbine stages with advanced high temperature alloy integral wheels, variable power turbine nozzle for turbine temperature and output torque control, catalytic combustor, and annular ceramic recuperator. The engine was rated at 54.81 kW, using water injection on hot days to maintain vehicle acceleration. The estimated vehicle fuel economy was 11.9 km/l in the combined driving cycle, 43 percent over the 1976 compact automobile. The estimated IGT production vehicle selling price was 10 percent over the comparable piston engine vehicle, but the improved fuel economy and reduced maintenance and repair resulted in a 9 percent reduction in life cycle cost.

Chapman, W. I.↗

The initial mass function and global rates of mass, momentum, and energy input to the interstellar medium via stellar winds

Published observational data are compiled and analyzed, using theoretical stellar-evolution models to determine the global rates of mass, momentum, and energy injected into the interstellar medium (ISM) by stellar winds. Expressions derived include psi = 0.00054 x (M to the -1.03) stars formed/sq kpc yr log M (where M is the initial mass function in solar mass units) and mass-loss = (2 x 10 to the -13th) x (L to the 1.25) solar mass/yr (with L in solar luminosity units). It is found that the wind/supernova injection of energy into the ISM and the mass loss from stars of 5 solar mass or more are approximately balanced by the dissipation of energy by cloud-cloud collisions and the formation of stars, respectively.

Van Buren, D.↗

Volcanism-Climate Interactions

The range of disciplines in the study of volcanism-climate interactions includes paleoclimate, volcanology, petrology, tectonics, cloud physics and chemistry, and climate and radiation modeling. Questions encountered in understanding the interactions include: the source and evolution of sulfur and sulfur-gaseous species in magmas; their entrainment in volcanic plumes and injection into the stratosphere; their dissipation rates; and their radiative effects. Other issues include modeling and measuring regional and global effects of such large, dense clouds. A broad-range plan of research designed to answer these questions was defined. The plan includes observations of volcanoes, rocks, trees, and ice cores, as well as satellite and aircraft observations of erupting volcanoes and resulting lumes and clouds.

Walter, Louis S.↗

Performance and stability of a booster class LOX/hydrogen swirl coaxial-element injector

Initial tests were conducted with an axisymmetric subscale version of the Advanced Launch System (ALS) prototype injector, with a pattern of pressure-atomizing LOX-swirled injector elements flowing about 50 percent more propellant per element than the Space Shuttle Main Engine injector element. The swirl coax combustion was statistically stable and quiet with and without combustion stability aids. Artificial perturbations to assess dynamic stability generated overpressures from 2 to 15 percent of chamber pressure, and all combustion oscillations were damped within 3 millisec. Chug-free throttle was demonstrated to 65 percent of the nominal operating chamber pressure. Combustion performance in an ablative-lined chamber was calculated with both specific impulse and characteristic exhaust velocity, and averaged about 97 percent. Combustion performance of the injector element depended upon the momentum angle of the injected propellants rather than the shearing rate of the fuel on the oxidizer.

Hulka, J.↗

Evaluation of scramjet nozzle configurations and film cooling for reduction of wall heating

Experiments on relaminarization, or reverse transition of turbulent flow, have been conducted with a scramjet combustor and nozzle model. The Mach-2.7 direct-connect scramjet combustor employed swept-ramp fuel injectors, and the entering flow simulated Mach-6 to Mach-7 flight conditions. Tests were also conducted without combustor fuel to produce a higher nozzle entrance Mach number and lower pressures. Additional tests were conducted to evaluate the effectiveness of film cooling on the cowl region. At each test condition studied, the entrance radius had no significant effect on the measured downstream wall heating rates. Analysis of the data when fuel was injected into the combustor shows good agreement with turbulent theory; for the tests without fuel injection and combustion, the data downstream of the nozzle entrance radius are intermediate to the calculated turbulent and laminar solutions. Results of film-cooling tests, conducted with both hydrogen and nitrogen injectants, showed that, per unit mass, the hydrogen was approximately three to four times more effective than nitrogen in reducing the downstream wall heating rates.

Baker, N. R.↗

Heat Transfer to Fuel Sprays Injected into Heated Gases

This report presents the results of a study made of the influence of several variables on the pressure decrease accompanying injection of a relatively cool liquid into a heated compressed gas. Indirectly, this pressure decrease and the time rate of change of it are indicative of the total heat transferred as well as the rate of heat transfer between the gas and the injected liquid. Air, nitrogen, and carbon dioxide were used as ambient gases; diesel fuel and benzene were the injected liquids. The gas densities and gas-fuel ratios covered approximately the range used in compression-ignition engines. The gas temperatures ranged from 150 degrees c. to 350 degrees c.

Selden, Robert F↗

A model of Triton's role in Neptune's magnetosphere

Escape of neutral hydrogen (H) and nitrogen (N) from Triton's maintains a large neutral cloud, called the Triton torus, in Neptune's magnetosphere. We have developed the first detailed Monte Carlo simulation model of the Triton torus that includes the collisionality, the complex geometry, the injection of two neutral species from Triton (H and N), and the combined effects of photoionization, electron impact ionization, and charge exchange. Ionization in Neptune's plasma sheet was modeled using Voyager plasma observations. Collisions cause both the H and N neutral clouds to become more radially extended, both toward Neptune and out beyond the magnetopause, as well as more extended in latitude, when compared with collisionless models. Moreover, collisions of H with the much more massive N greatly enhance the collisional ejection of H from the system and into Neptune's atmosphere. This effect decreases the probability of H ionization within the magnetosphere relative to that for N, and furthermore causes model results for two-species injection from Triton to differ significantly from those for H injection alone. For a hydrogen escape rate from Triton of 5 x 10(exp 25)/s, as given by photo-chemical models of Triton's upper atmosphere, a nitrogen escape rate of 5 x 10(exp 24)/s gives proton and N(+) sources of 5.6 x 10(exp 24)/s and 3.3 x 10(exp 24)/s, respectively, whose ratio is close to the observed ratio of protons to heavies. A nitrogen escape rate of 2 x 10(exp 25)/s, yields an N(+) source more than twice that of protons, inconsistent with the Voyager data.

Decker, R. B.↗

Effect of body repositioning after venous air embolism. An echocardiographic study

BACKGROUND: Current therapy for massive venous air embolism (VAE) may include the use of the left lateral recumbent (LLR) position, although its effectiveness has been questioned. This study used transesophageal echocardiography to evaluate the effect of body repositioning on intracardiac air and acute cardiac dimension changes. METHODS: Eighteen anesthetized dogs in the supine position received a venous air injection of 2.5 ml/kg at a rate of 5 ml/ s. After 1 min the dogs were repositioned into either the LLR, LLR 10 degrees head down (LLR-10 degrees), right lateral recumbence, or remained in the supine position. RESULTS: Repositioning after VAE resulted in relocation of intracardiac air to nondependent areas of the right heart. Peak right ventricular (RV) diameter increase and mean arterial pressure decrease were greater in the repositioned animals compared with those in the supine position (P < 0.05). Right ventricular diameter and mean arterial pressure showed an inverse correlation (r = 0.81). Peak left atrial diameter decrease was greater in the LLR and LLR-10 degrees positions compared with the supine position (P < 0.05). Repositioning did not influence peak pulmonary artery pressure increase, and no correlation was found between RV diameter and pulmonary artery pressure. All animals showed electrocardiogram and echocardiographic changes reconcilable with myocardial ischemia. CONCLUSIONS: In dogs, body repositioning after VAE provided no benefit in hemodynamic performance or cardiac dimension changes, although relocation of intracardiac air was demonstrated. Right ventricular air did not appear to result in significant RV outflow obstruction, as pulmonary artery pressure increased uniformly in all groups and was not influenced by the relocation of intracardiac air. The combination of increased RV afterload and arterial hypotension, possibly with subsequent RV ischemia rather than RV outflow obstruction by an airlock appeared to be the primary mechanism for cardiac dysfunction after VAE.

NASA Discipline Environmental Health↗

The effect of entrance radius and film injection on wall heating in scramjet nozzles

An experimental study has been performed with a scramjet combustor and nozzle model to determine the effect of nozzle radii on relaminarization, and the effectiveness of film injection in reducing wall heat flux. The nozzle model was installed downstream of a swept-ramp scramjet combustor model, operated at Mach 2.7 with vitiated air, simulating Mach 6-7 flight enthalpies. Results from tests conducted with three nozzle radii, varying in curvature from a sharp Prandtl-Meyer expansion to a radius of two scramjet combustor exit heights, showed little or no effect on the downstream wall heat flux, which is not in agreement with both subsonic and supersonic relaminarization correlations in the available literature. In contrast, film injection upstream of all three radii produced reductions of 70 percent in the entire nozzle model heating rate, for the nominal film-to-free stream pressure matched condition. Results from film injection, with and without pressure gradient, but without wall curvature, show that the gradients appear to stabilize the film, with the resulting reductions in wall heat transfer rates apparent far downstream of the point of injection.

Baker, N. R.↗

Effect of primary-zone water injection on pollutants from a combustor burning liquid ASTM A-1 and vaporized propane fuels

A combustor segment 0.457 meter (18 in.) long with a maximum cross section of 0.153 by 0.305 meter (6 by 12 in.) was operated at inlet-air temperatures of 590 and 700 K, inlet-air pressures of 4 and 10 atmospheres, and fuel-air ratios of 0.014 and 0.018 to determine the effect of primary-zone water injection on pollutants from burning either propane or ASTM A-1 fuel. At a simulated takeoff condition of 10 atmospheres and 700 K, multiple-orifice nozzles used to inject water at 1 percent of the airflow rate reduced nitrogen oxides 75 percent with propane and 65 percent with ASTM A-1 fuel. Although carbon monoxide and unburned hydrocarbons increased with water injection, they remained relatively low; and smoke numbers were well below the visibility limit.

Ingebo, R. D.↗

Convective and radiative heating of a Saturn entry probe

The extent of convective and radiative heating for a Saturn entry probe is investigated in the absence and presence of ablation mass injection. The flow in the shock layer is assumed to be axisymmetric, viscous and in local thermodynamic equilibrium. The importance of chemical nonequilibrium effects for both the radiative and convective nonblowing surface heating rates is demonstrated for prescribed entry conditions. Results indicate that the nonequilibrium chemistry can significantly influence the rate of radiative heating to the entry probes. With coupled carbon-phenolic ablation injection, the convective heating rates are reduced substantially. Turbulence has little effect on radiative heating but it increases the convective heating considerably.

Tiwari, S. N.↗

Periventricular anteroventral third ventricle lesions diminish the pressor response produced by systemic injection of the N-methyl-D-aspartate receptor antagonist MK-801

This study examined whether electrolytic ablation of the periventricular anteroventral third ventricle (AV3V) would affect the increases in mean arterial blood pressure (MAP) and heart rate (HR) in conscious rats produced by systemic injection of the centrally acting N-methyl-D-aspartate (NMDA) receptor ion-channel blocker, (+)-5-methyl-10,11-dihydro-5H-dibenzo[a,d]cyclohepten-5, 10-imine (MK-801; 250 microgram/kg, i.v.). MK-801 produced a smaller increase in MAP in rats with AV3V lesions than in sham-lesion rats (+36+/-2% vs. +52+/-5%, respectively, P<0.05). In contrast, MK-801 produced similar increases in HR in the AV3V- and sham-lesion rats (+28+/-3% vs. +22+/-4%, respectively, P>0.05). These findings demonstrate that the MK-801-induced pressor response is dependent upon the integrity of the AV3V region, whereas the MK-801-induced tachycardia is not. Copyright 1999 Elsevier Science B.V.

NASA Discipline Regulatory Physiology↗

The Origin and Evolution of Deep Plasmaspheric Notches

Deep plasmaspheric notches can extend over more than 2 RE in radial distance and 3 hours MLT in the magnetic equatorial plane. They appear to be among the largest evacuated features in the exterior plasmaspheric boundary. They can last for days and exhibit varying structure. It appears that low-density channels resulting from the entrainment of the plasmaspheric convection plume during storm-time recovery share the same origin as notches. Notches rather than channels result from differences in storm- time conditions. Strong convection tends to result in low-density channels, while weaker convection and limited erosion results in notches. Eighteen events in 2000 have been analyzed. Among these events, notches were found to drift as slowly as 72% of corotation. In only one case was a notch found to drift at the corotation rate within measurement error. On average, notches drift at about 2 1.5 hours per day or 90% of the co-rotational rate. Notches also sometimes exhibit an interior structure that appears as an extended prominence of dense plasma, which forms a W-like feature in IMAGEEUV images when viewed from Earth-center. Modeling suggests such features may be caused by small-scale potential structures that result from the localized injection of ring current plasma. Plasma filling rates during recovery and drainage during a minor storm are reported.

Gallagher, D. L.↗

Injection Seeded Laser for Formaldehyde Differential Fluorescence Lidar

We describe the design and development of an injection seeded Nd:YVO4 laser for use in a differential fluorescence lidar for measuring atmospheric formaldehyde profiles. A high repetition rate Q-switched laser is modified to accept injection seed input to spectrally narrow and tune the output. The third harmonic output is used to excite formaldehyde (HCHO) fluorescence when tuned to a HCHO absorption line. Spectral confirmation is made with the use of a photoacoustic cell and grating spectrometer.

formaldehyde (HCHO) fluorescence↗

Origin and Evolution of Deep Plasmaspheric Notches

Deep plasmaspheric notches can extend over more than 2 R(sub E) in radial distance and 3 hours MLT in the magnetic equatorial plane, as observed by the extreme ultraviolet (EUV) imager on the IMAGE mission. They are among the largest evacuated features in the exterior plasmaspheric boundary. They can last for days and exhibit a variety of shapes. It appears that weak convection and limited erosion precedes notch formation at the westward, near-Earth edge of the convection plume. Eighteen clear notch events were found and analyzed in 2000. Among these events, notches were found to drift as slowly as 44% of corotation. In only one case was a notch found to drift at the corotation rate within measurement error. On average, these notches drift at about 21.5 h d(sup -1) or 90% of the corotational rate. Notches sometimes exhibit an interior structure that appears as an extended prominence of dense plasma, which forms a W- or M-like feature in IMAGE/EUV images, depending on viewing perspective. Initial modeling suggests that notches and notch prominences may be caused in part by intense small-scale potential structures that result from the localized injection of ring current plasma. Plasma filling rates during recovery are examined in three L shell ranges from L = 2 to L = 3.5 with rates ranging from 5 to 140 cm(sup -3) d(sup -1). Plasma loss during a minor substorm is found to extend to surprisingly low L shell with rates ranging from 100 to 130 cm(sup -3) d(sup -1) across the L shells examined.

Gallagher, D. L.↗

Metabolic effects of artificial environments

The mechanisms by which inert gases influence metabolism were investigated from several viewpoints. Groups of rats were exposed at the thermal neutral temperature of the respective mixtures, to normoxic (P sub A 02 = 100 mm Hq) environments with argon, helium or nitrogen as the diluent at a total pressure of one atmosphere. The possible influence of diluent gases on oxygen transport to the cell was examined with hypoxic (P sub A O2 = 70 mm Hg) mixtures of the same diluent gases. Metabolic measurements included food, water, and oxygen consumption, CO2 production, hematocrit and the rate C-14O2 of expiration subsequent to intraperitoneal injection of acetate-1-C-14 or glucose UL-C-14. Argon-exposed animals showed a consistently decreased metabolic rate while, on the other hand, helium-exposed rats did not significantly alter metabolic rate relative to nitrogen. Certain indices, including acetate and glucose utilization, suggested that helium attenuated the imposed hypoxia at the cellular level while argon facilitated it as compared with nitrogen. These results suggest that metabolic influence of helium is largely thermal in nature while argon has a significant direct metabolic effect and that diluent gases may selectively influence oxygen availability to the interior of the cell.

Jordan, J. P.↗

Tangential-Entry Injector With Internal Reed Valve

Liquid-spray-injecting device provides designed pressure drop versus rate of flow to help meter flow. Includes cylinder with tangential entry slots and internal reed valve. Tangential entry imparts swirling motion to liquid, resulting in finely atomized liquid spray. Reeds vary flow areas of entry slots by deflecting in response to pressure of liquid. Variation alters pressure-versus-flow characteristic. Device used to provide wide range of throttleability for liquid fuel injected into combustion chamber or engine.

Cox, George B., Jr.↗

Abnormal norepinephrine clearance and adrenergic receptor sensitivity in idiopathic orthostatic intolerance

BACKGROUND: Chronic orthostatic intolerance (OI) is characterized by symptoms of inadequate cerebral perfusion with standing, in the absence of significant orthostatic hypotension. A heart rate increase of >/=30 bpm is typical. Possible underlying pathophysiologies include hypovolemia, partial dysautonomia, or a primary hyperadrenergic state. We tested the hypothesis that patients with OI have functional abnormalities in autonomic neurons regulating cardiovascular responses. METHODS AND RESULTS: Thirteen patients with chronic OI and 10 control subjects underwent a battery of autonomic tests. Systemic norepinephrine (NE) kinetics were determined with the patients supine and standing before and after tyramine administration. In addition, baroreflex sensitivity, hemodynamic responses to bolus injections of adrenergic agonists, and intrinsic heart rate were determined. Resting supine NE spillover and clearance were similar in both groups. With standing, patients had a greater decrease in NE clearance than control subjects (55+/-5% versus 30+/-7%, P<0.02). After tyramine, NE spillover did not change significantly in patients but increased 50+/-10% in control subjects (P<0.001). The dose of isoproterenol required to increase heart rate 25 bpm was lower in patients than in control subjects (0.5+/-0.05 versus 1.0+/-0.1 microg, P<0.005), and the dose of phenylephrine required to increase systolic blood pressure 25 mm Hg was lower in patients than control subjects (105+/-11 versus 210+/-12 microg, P<0.001). Baroreflex sensitivity was lower in patients (12+/-1 versus 18+/-2 ms/mm Hg, P<0.02), but the intrinsic heart rate was similar in both groups. CONCLUSIONS: The decreased NE clearance with standing, resistance to the NE-releasing effect of tyramine, and increased sensitivity to adrenergic agonists demonstrate dramatically disordered sympathetic cardiovascular regulation in patients with chronic OI.

Clinical Trial↗