Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “ice cloud models”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 271 records · Page 15

Ice Nucleation in Deep Convection

The processes controlling production of ice crystals in deep, rapidly ascending convective columns are poorly understood due to the difficulties involved with either modeling or in situ sampling of these violent clouds. A large number of ice crystals are no doubt generated when droplets freeze at about -40 C. However, at higher levels, these crystals are likely depleted due to precipitation and detrainment. As the ice surface area decreases, the relative humidity can increase well above ice saturation, resulting in bursts of ice nucleation. We will present simulations of these processes using a large-eddy simulation model with detailed microphysics. Size bins are included for aerosols, liquid droplets, ice crystals, and mixed-phase (ice/liquid) hydrometers. Microphysical processes simulated include droplet activation, freezing, melting, homogeneous freezing of sulfate aerosols, and heterogeneous ice nucleation. We are focusing on the importance of ice nucleation events in the upper part of the cloud at temperatures below -40 C. We will show that the ultimate evolution of the cloud in this region (and the anvil produced by the convection) is sensitive to these ice nucleation events, and hence to the composition of upper tropospheric aerosols that get entrained into the convective column.

Jensen, Eric↗

Effective Radius of Ice Cloud Particle Populations Derived from Aircraft Probes

The effective radius(r(sub e)) is a crucial variable in representing the radiative properties of cloud layers in general circulation models. This parameter is proportional to the condensed water content (CWC) divided by the extinction (sigma). For ice cloud layers, parameterizations for r(sub e), have been developed from aircraft in-situ measurements 1) indirectly, using data obtained from particle spectrometer probes and assumptions or observations about particle shape and mass to get the ice water content (IWC) and area to get sigma, and recently 2) from probes that measure IWC and sigma directly. This study compares [IWC/sigma] derived from the two methods using data sets acquired from comparable instruments on two aircraft, one sampling clouds at mid-levels and the other at upper-levels during the CRYSTAL-FACE field program in Florida in 2002. The sigma and IWC derived by each method are compared and evaluated in different ways for each aircraft data set. Direct measurements of sigma exceed those derived indirectly by a factor of two to two and a half. The IWC probes, relying on ice sublimation, appear to measure accurately except when the IWC is high or the particles too large to sublimate completely during the short transit time through the probe. The IWC estimated from the particle probes are accurate when direct measurements are available to provide constraints and useful information in high IWC/large particle situations. Because of the discrepancy in sigma estimates between the direct and indirect approaches, there is a factor of 2 to 3 difference in [IWC/sigma] between them. Although there are significant uncertainties involved in its use, comparisons with several independent data sources suggest that the indirect method is the more accurate of the two approaches. However, experiments are needed to resolve the source of the discrepancy in sigma.

Heymsfield, Andrew J.↗

TPSAS-NF1676L-13135-DND

Aircraft Icing - Aircraft structures act as ice nuclei in supercooled clouds - ice collects, weight increases, plane falls - Pilots need to know where and when icing can occur - PIREPS are first order: sparse, aircraft dependent, location uncertain - Model analyses and forecasts: freezing levels, cloud expectations - radar => precipitation - All combined in NCAR/FAA/NOAA/NASA program to provide Current Icing Product (CIP) & Forecast Icing product (FIP) analyses to pilots (CONUS) - some inadequacies remain - NWP uncertainties, intensity, altitude of icing, etc. - Operational satellites can add valuable information - indirectly: input of cloud properties to CIP & NWP - directly: determination of icing threat from real time satellite data

William L Smith↗

Role of Arctic Low Clouds in the Arctic Climate System: Isolating the Surface Type Influence on Arctic Low-Clouds

Interactions between sea ice and clouds represent a mechanism through which sea ice influences climate. Understanding the cloud response to the rapidly changing Arctic surface properties is necessary for improving climate simulations and projection of future change inside and outside the Arctic. Towards the goal of understanding the cloud response to sea ice, we composite cloud properties for ice-free, marginal ice zone (MIZ), and ice-covered surfaces during MIZ crossing events to analyze the cloud property differences between surface types. Restricting the analysis to MIZ crossing events enables the isolation of the sea ice effect on clouds from meteorological factors. We find larger cloud fraction and total water concentration below ~1.5 km over ice-free relative to ice-covered surfaces during non-summer months. During summer, the results suggest larger cloud fraction and total water concentration over ice-free surfaces, however differences do not exceed observational uncertainty. Cloud property differences are linked to atmospheric thermodynamic profile differences, namely ice-free surfaces are warmer, moister, less stable, and have more positive surface turbulent fluxes than ice-covered surfaces. Ice-free minus ice-covered cloud property differences scale with surface temperature differences and are only found in the presence of a surface temperature difference. Our results suggest a 0.02 cloud fraction and 0.005 g m 3 total water concentration increase (~5%) at the level of maximum cloud fraction between 2000-2021 due to the observed Arctic sea ice decline in fall, corresponding to ~2 Wm 2 increase in the net surface radiative flux supporting a positive sea ice-cloud radiative feedback in fall and winter and a negative sea ice-cloud radiative feedback in spring. We propose an updated conceptual model where the average surface type influence on cloud properties is mediated by surface temperature differences between ice-free and ice-covered surfaces.

Arctic climate↗

Investigation of Polar Stratospheric Cloud Solid Particle Formation Mechanisms Using ILAS and AVHRR Observations in the Arctic

Satellite observations of denitrification and ice clouds in the Arctic lower stratosphere in February 1997 are used with Lagrangian microphysical box model calculations to evaluate nucleation mechanisms of solid polar stratospheric cloud (PSC) particles. The occurrences of ice clouds are not correlated in time and space with the locations of back trajectories of denitrified air masses, indicating that ice particle surfaces are not always a prerequisite for the formation of solid PSCs that lead to denitrification. In contrast, the model calculations incorporating a pseudoheterogeneous freezing process occurring at the vapor-liquid interface can quantitatively explain most of the observed denitrification when the nucleation activation free energy for nitric acid dihydrate formation is raised by only approx.10% relative to the current published values. Once nucleated, the conversion of nitric acid dihydrate to the stable trihydrate phase brings the computed levels of denitrification closer to the measurements. INDEX TERMS: 0305 Atmospheric Composition and Structure: Aerosols and particles (0345, 4801); 0320 Atmospheric Composition and Sb~lctureC: loud physics and chemistry; 0340 Atmospheric Composition and Structure: Middle atmosphere-composition and chemistry

Irie, H.↗

High Ice Water Content Associated with a Darwin, Austrailia, Mesoscale Convective System

A mesoscale convective complex that occurred during the 2014 Darwin, Australia, flight campaign is examined via a three-dimensional, numerical simulation. The focus of the study is to better understand the presence and development of High Ice Water Content (HIWC) that was observed in the actual storm. Although peak values of ice water content may occur early in the storm lifetime, large areas of high concentrations expand with time and persist even when the storm tops begin to warm. The storm canopy which contains HIWC, has low radar reflectivity factor and is fed by an ensemble of regenerating thermal plumes. Detection via weather radar of the aviation hazard associated HIWC is challenging due the low values of radar reflectivity factor.

Aviation hazards↗

Interpretation of satellite-observed thunderstorm anvil structure

The radiative characteristics of an anvil plume sensed by satellite radiometers are studied to discern the reason for an observed 'V' pattern of colder temperatures and a corresponding internal warm region. The measured black body temperature is affected by the ice water content and particle distributions in the cloud layer. Attention is given to 'V' anvil structure examined by Haynesfield et al. (1979). The GOES satellite IR data are treated with a plane parallel geometric radiative transfer model and a particle trajectory model is used to simulate ice particle concentrations downwind from a strongly divergent cloud top. Output from the two models indicate the 'V' pattern arises from divergence in the storm anvil. The particle concentration was elevated within the V-shaped region, causing lower temperatures in the V arms. The V is produced by strong upper level flow as well as strong mass and moisture divergence in the storm outflow.

Heymsfield, G. M.↗

Preconditioning of overcast-to-broken cloud transitions by riming in marine cold air outbreaks

Marine cold air outbreaks (CAOs) commonly form overcast cloud decks that transition into broken cloud fields downwind, dramatically altering the local radiation budget. In this study, we investigate the impact of frozen hydrometeors on these transitions. We focus on a CAO case in the NW Atlantic, the location of the multi-year flight campaign ACTIVATE (Aerosol Cloud meTeorology Interactions oVer the western ATlantic Experiment). We use MERRA-2 (Modern-Era Retrospective analysis for Research and Applications, version 2) reanalysis fields to drive large eddy simulations with mixed-phase two-moment microphysics in a Lagrangian framework. We find that transitions are triggered by substantial rain (rainwater paths >25 g m−2), and only simulations that allow for aerosol depletion result in sustained breakups, as observed. Using a range of diagnostic ice nucleating particle concentrations, Ninp, we find that increasing ice progressively accelerates transitions, thus abbreviating the overcast state. Ice particles affect the cloud-topped boundary layer evolution, primarily through riming-related processes prior to substantial rain, leading to (1) a reduction in cloud liquid water, (2) early consumption of cloud condensation nuclei, and (3) early and light precipitation cooling and moistening below cloud. We refer to these three effects collectively as “preconditioning by riming”. Greater boundary layer aerosol concentrations available as cloud condensation nuclei (CCN) delay the onset of substantial rain. However, cloud breakup and low CCN concentration final stages are found to be inevitable in this case, due, primarily, to liquid water path buildup. An ice-modulated cloud transition speed suggests the possibility of a negative cloud–climate feedback. To address prevailing uncertainties in the model representation of mixed-phase processes, the magnitude of ice formation and riming impacts and, thereby, the strength of an associated negative cloud–climate feedback process, requires further observational evaluation by targeting riming hot spots with in situ imaging probes that allow for both the characterization of ice particles and abundance of supercooled droplets.

Marine cold air outbreaks↗

The 27-28 October 1986 FIRE IFO Cirrus Case Study: Cirrus Parameter Relationships Derived from Satellite and Lidar Data

Cirrus cloud radiative and physical characteristics are determined using a combination of ground-based, aircraft, and satellite measurements taken as part of the FIRE Cirrus Intensive Field Observations (IFO) during October and November 1986. Lidar backscatter data are used with rawinsonde data to define cloud base, center, and top heights and the corresponding temperatures. Coincident GOES 4-km visible (0.65 micro-m) and 8-km infrared window (11.5 micro-m) radiances are analyzed to determine cloud emittances and reflectances. Infrared optical depth is computed from the emittance results. Visible optical depth is derived from reflectance using a theoretical ice crystal scattering model and an empirical bidirectional reflectance model. No clouds with visible optical depths greater than 5 or infrared optical depths less than 0.1 were used in the analysis. Average cloud thickness ranged from 0.5 km to 8.0 km for the 71 scenes. Mean vertical beam emittances derived from cloud-center temperatures were 0.62 for all scenes compared to 0.33 for the case study (27-28 October) reflecting the thinner clouds observed for the latter scenes. Relationships between cloud emittance, extinction coefficients, and temperature for the case study are very similar to those derived from earlier surface- based studies. The thicker clouds seen during the other IFO days yield different results. Emittances derived using cloud-top temperature were ratioed to those determined from cloud-center temperature. A nearly linear relationship between these ratios and cloud-center temperature holds promise for determining actual cloud-top temperatures and cloud thicknesses from visible and infrared radiance pairs. The mean ratio of the visible scattering optical depth to the infrared absorption optical depth was 2.13 for these data. This scattering efficiency ratio shows a significant dependence on cloud temperature. Values of mean scattering efficiency as high as 2.6 suggest the presence of small ice particles at temperatures below 230 K. The parameterization of visible reflectance in terms of cloud optical depth and clear-sky reflectance shows promise as a simplified method for interpreting visible satellite data reflected from cirrus clouds. Large uncertainties in the optical parameters due to cloud reflectance anisotropy and shading were found by analyzing data for various solar zenith angles and for simultaneous AVHRR data. Inhomogeneities in the cloud fields result in uneven cloud shading that apparently causes the occurrence of anomalously dark, cloudy pixels in the GOES data. These shading effects complicate the interpretation of the satellite data. The results highlight the need for additional study of cirrus cloud scattering processes and remote sensing techniques.

Minnis, Patrick↗

The 27-28 October 1986 FIRE IFO Cirrus Case Study: Cirrus Parameter Relationships Derived from Satellite and Lidar Data

Cirrus cloud radiative and physical characteristics are determined using a combination of ground based, aircraft, and satellite measurements taken as part of the First ISCCP Region Experiment (FIRE) cirrus intensive field observations (IFO) during October and November 1986. Lidar backscatter data are used with rawinsonde data to define cloud base, center and top heights and the corresponding temperatures. Coincident GOES-4 4-km visible (0.65 micrometer) and 8-km infrared window (11.5 micrometer) radiances are analyzed to determine cloud emittances and reflectances. Infrared optical depth is computed from the emittance results. Visible optical depth is derived from reflectance using a theoretical ice crystal scattering model and an empirical bidirectional reflectance model. No clouds with visible optical depths greater than 5 or infrared optical depths less than 0.1 were used in the analysis. Average cloud thickness ranged from 0.5 km to 8.0 km for the 71 scenes. Mean vertical beam emittances derived from cloud-center temperatures were 062 for all scenes compared to 0.33 for the case study (27-28 October) reflecting the thinner clouds observed for the latter scenes. Relationships between cloud emittance , extinction coefficients, and temperature for the case study are very similar to those derived from earlier surface-based studies. The thicker clouds seen during the other IFO days yield different results. Emittances derived using cloud-top temperature wer ratioed to those determined from cloud-center temperature. A nearly linear relationship between these ratios and cloud-center temperature holds promise for determining actual cloud-top temperature and cloud thickness from visible and infrared radiance pairs. The mean ratio of the visible scattering optical depth to the infrared absorption optical depth was 2.13 for these data. This scattering efficiency ratio shows a significant dependence on cloud temperature. Values of mean scattering efficiency as high as 2.6 suggest the presence of small ice particles at temperatures below 230 K. the parameterization of visible reflectance in terms of cloud optical depth and clear sky reflectance shows promise as a simplified method for interpreting visible satellite data reflected from cirrus clouds. Large uncertainties in the optical parameters due to cloud reflectance anisotropy and shading were found by analyzing data for various solar zenith angles and for simultaneous advanced very high resolution radiometer (AVHRR) data. Inhomogeneities in the cloud fields result in uneven cloud shading that apparently causes the occurrence of anomalously dark, cloud pixels in the GOES data. These shading effects complicate the interpretation of the satellite data. The results highlight the need for additional study or cirrus cloud scattering processes and remote sensing techniques.

Minnis, Patrick↗

Investigation of passive atmospheric sounding using millimeter and submillimeter wavelength channels

Progress by the Georgia Institute of Technology's Laboratory for Radio-science and Remote Sensing in developing techniques for passive microwave retrieval of water vapor profiles and cloud and precipitation parameters using millimeter and submillimeter wavelength channels is reviewed. Channels of particular interest are in the tropospheric transmission windows at 90, 166, 220, 340, and 410 GHz and centered around the water vapor lines at 183 and 325 GHz. Collectively, these channels have potential application in high-resolution precipitation mapping (e.g., from geosynchronous orbit), remote sensing of cloud and precipitation parameters, including cirrus ice mass, and improved retrieval of water vapor profiles. During the period from January 1, 1994 through June 30, 1994 research activities focussed on calibrating and interpreting data from the Millimeter-Wave Imaging Radiometer (MIR). The MIR was deployed on the NASA ER-2 during the Convective Atmospheric Moisture Experiment (CAMEX, September-October 1993) to obtain the first submillimeter-wave tropospheric imagery of convective precipitations. A 325-GHz radiometer consisted of a submillimeter-wave DSB receiver with three IF channels at +/- 1, 3, and 8.5 GHz, and approximately 14 dB DSB noise figure was successfully operated during these experiments. Activities supported under this grant include a study of the impact of local oscillator reflections from the MIR calibration loads, the development of optimal gain and offset filters for radiometric calibration, and the modeling and interpretation of the MIR 325-GHz data over both clear and cloudy atmospheres. In addition, polarimetric radiometer measurements and modeling for ocean surface and atmospheric cloud-ice studies_were supported.

Gasiewski, Albin J.↗

Observing Ice in Clouds from Space

There are many satellite observations of cloud top properties and the liquid and rain content of clouds, however, we do not yet quantitatively understand the processes that control the water budget of the upper troposphere where ice is the predominant phase, and how these processes are linked to precipitation processes and the radiative energy budget. The ice in clouds in the upper troposphere either melts into rain or is detrained, and persists, as cirrus clouds affecting the hydrological and energy cycle, respectively. Fully modeling the Earth's climate and improving weather and climate forecasts requires accurate satellite measurements of various cloud properties at the temporal and spatial scales of cloud processes. These properties include cloud horizontal and vertical structure, cloud water content and some measure of particle sizes and shapes. The uncertainty in knowledge of these ice characteristics is reflected in the large discrepancies in model simulations of the upper tropospheric water budget. Model simulations are sensitive to the partition of ice between precipitation and outflow processes, i.e., to the parameterization of ice clouds and ice processes. One barrier to achieving accurate global ice cloud properties is the lack of adequate observations at millimeter and submillimeter wavelengths (183-874 GHz). Recent advances in instrumentation have allowed for the development and implementation of an airborne submillimeter-wave radiometer. The brightness temperatures at these frequencies are especially sensitive to cirrus ice particle sizes (because they are comparable to the wavelength). This allows for more accurate ice water path estimates when multiple channels are used to probe into the cloud layers. Further, submillimeter wavelengths offer simplicity in the retrieval algorithms because they do not probe into the liquid and near surface portions of clouds, thus requiring only one term of the radiative transfer equation (ice scattering) to relate brightness temperatures to ice. The next step is a satellite mission designed to acquire global Earth radiance measurements in the submillimeter-wave region, thus bridging the measurement gap between microwave sounders and shorter-wavelength infrared and visible sensors. This presentation provides scientific justification and an approach to measuring ice water path and particle size from a satellite platform that spans a range encompassing both the hydrologically active and radiatively active components of cloud systems.

Ackerman, S.↗

Latest Developments in SLD Scaling

Scaling methods have been shown previously to work well for super cooled large droplet (SLD) main ice shapes. However, feather sizes for some conditions have not been well represented by scale tests. To determine if there are fundamental differences between the development of feathers for appendix C and SLD conditions, this study used time-sequenced photographs, viewing along the span of the model during icing sprays. An airspeed of 100 kt, cloud water drop MVDs of 30 and 140 microns, and stagnation freezing fractions of 0.30 and 0.50 were tested in the NASA Glenn Icing Research Tunnel using an unswept 91-cm-chord NACA0012 airfoil model mounted at 0deg AOA. The photos indicated that the feathers that developed in a distinct region downstream of the leading-edge ice determined the horn location and angle. The angle at which feathers grew from the surface were also measured; results are shown for an airspeed of 150 kt, an MVD of 30 microns, and stagnation freezing fractions of 0.30 to 0.60. Feather angles were found to depend strongly on the stagnation freezing fraction, and were independent of either chordwise position on the model or time into the spray. Feather angles also correlated well with horn angles. For these tests, there did not appear to be fundamental differences between the physics of SLD and appendix C icing; therefore, for these conditions similarity parameters used for appendix C scaling appear to be valid for SLD scaling as well. Further investigation into the cause for the large feather structures observed for some SLD conditions will continue.

Tsao, Jen-Ching↗

Novel Parameterization of Ice Cloud Effective Diameter from Collocated CALIOP-IIR and CloudSat Retrievals

Satellite-based measurements of global ice cloud microphysical properties are sampled to develop a novel set of physical parameterizations, relating to cloud layer temperature and effective diameter D(e), that can be implemented for two separate applications: in numerical weather prediction models and lidar-based cloud radiative forcing studies. Ice cloud optical properties (i.e., spectral scattering and absorption) are estimated based on the effective size and habit mixture of the cloud particles. Historically, the ice cloud D(e) has been parameterized from aircraft in situ measurements. However, aircraft-based parameterizations are opportunistic in that they only represent specific types of clouds (e.g., convective anvil, tropopause-topped cirrus) in the regions in which they were sampled and, in some cases, are limited in fully resolving the entire vertical cloud layer. Breaking away from the aircraft-based parameterization paradigm, this study is the first of its kind to attempt a parameterization of D(e) as a function of temperature, ice water content (IWC), and lidar-derived extinction from satellite-based global oceanic measurements of ice clouds. Data from both active and passive remote sensing sensors from two of NASA’s A-Train satellites, CloudSat and CALIPSO, are collected to guide development of globally robust parameterizations of all ice cloud types and one exclusively for cirrus clouds.

Ice Cloud↗

Small field campaign: aerosol – ice formation closure pilot study. Final Report

Prediction of atmospheric ice formation from aerosol particles by heterogeneous nucleation represents one of the grand challenges in atmospheric science. Our insufficient predictive understanding of primary ice formation is the reason that climate models typically do not include heterogeneous ice nucleation with subsequent effects on climate uncertainty. Mixed-phase clouds, where supercooled water droplets and ice crystals coexist play globally an important role regulating climate. This is especially the case for the Arctic region that experiences the greatest warming due to climate change compared to other regions in the world. Immersion freezing initiated by ice-nucleating particles (INPs) in supercooled water droplets is recognized as the dominant primary ice formation pathway in mixed-phase cloud regimes. For this reason, it is crucial to evaluate our capability to predict immersion freezing for a given ambient aerosol population. The goal of this project is conducting a field-based pilot study at the U.S. DOE Atmospheric Radiation Measurement (ARM) user facility at Southern Great Plains (SGP) to evaluate our capability to predict the number concentration of aerosol particles that serve as INPs in the immersion freezing mode. Successful prediction of INP number concentrations is also termed “closure”. This field-observational approach represents a first-of-its kind attempt of an aerosol–ice formation closure study (AEROICESTUDY). Very few closure studies related to INPs have been conducted, and to our knowledge, none using robust size-resolved ambient aerosol composition measurements as a starting point. Achievement of aerosol–ice formation closure relies on our ability to characterize the ambient aerosol population with respect to particles size and composition and to determine INP number concentrations for specified freezing temperatures. This requires numerous online and offline instrumentation resulting in this pilot field campaign being a multi-institutional and community-collaborative effort. We chose the ARM SGP megasite for this first aerosol-ice formation closure pilot study due to its significant measurement capabilities available to obtain detailed physical characterization of the local aerosol population including size distribution, mass loading, and chemical composition of non-refractory aerosol particles. The overall objective of this project is to identify ice nucleation parameterizations that produce the most robust predictions of INP numbers and thus are best suited to be included in cloud and climate models. This objective includes the following goals for this field and laboratory-based project: i) What are the crucial aerosol physicochemical property measurements needed to accurately guide ice nucleation representations in models and long-term INP measurements? ii) What level of parameter details needs to be known to achieve aerosol–ice formation closure? iii) What are the leading causes for climate model bias in INP predictions? We found that the advances in our understanding of immersion freezing garnered over the last 20 years allowed us to yield partial and full closures of atmospheric immersion freezing from ambient aerosol particles. When the aerosol population is physicochemically complex and parameterizations for representative INP types are not yet available, we still struggle to accurately predict INP number concentrations. This project clearly demonstrates that with more laboratory and field measurements that are accompanied by particle composition analysis, the necessary datasets to achieve aerosol–ice formation closure for various locations will emerge, thus providing a robust foundation for guiding the representation of INPs in cloud and climate models.

54 ENVIRONMENTAL SCIENCES↗

A Melting Layer Model for Passive/Active Microwave Remote Sensing Applications: Simulation of TRMM Observations - Part 2

The one-dimensional, steady-state melting layer model developed in Part I of this study is used to calculate both the microphysical and radiative properties of melting precipitation, based upon the computed concentrations of snow and graupel just above the freezing level at applicable horizontal gridpoints of 3-dimensional cloud resolving model simulations. The modified 3-dimensional distributions of precipitation properties serve as input to radiative transfer calculations of upwelling radiances and radar extinction/reflectivities at the TRMM Microwave Imager (TMI) and Precipitation Radar (PR) frequencies, respectively. At the resolution of the cloud resolving model grids (approx. 1 km), upwelling radiances generally increase if mixed-phase precipitation is included in the model atmosphere. The magnitude of the increase depends upon the optical thickness of the cloud and precipitation, as well as the scattering characteristics of ice-phase precipitation aloft. Over the set of cloud resolving model simulations utilized in this study, maximum radiance increases of 43, 28, 18, and 10 K are simulated at 10.65, 19.35 GHz, 37.0, and 85.5 GHz, respectively. The impact of melting on TMI-measured radiances is determined not only by the physics of the melting particles but also by the horizontal extent of the melting precipitation, since the lower-frequency channels have footprints that extend over 10''s of kilometers. At TMI resolution, the maximum radiance increases are 16, 15, 12, and 9 K at the same frequencies. Simulated PR extinction and reflectivities in the melting layer can increase dramatically if mixed-phase precipitation is included, a result consistent with previous studies. Maximum increases of 0.46 (-2 dB) in extinction optical depth and 5 dBZ in reflectivity are simulated based upon the set of cloud resolving model simulations.

Olson, William S.↗

Ice Nucleating Particles, Aerosols and Clouds over the Higher Latitude Southern Ocean

Improved understanding of aerosol-cloud-precipitation interactions is a key goal of the DOE-ASR program. Ice Nucleating Particles (INPs) are rare aerosol particles that trigger ice formation in clouds. By doing so they may initiate precipitation in clouds, and this impacts cloud lifetime. Nowhere may the role of INPs be manifested so dramatically as in the Southern Ocean (SO). This vast region was the focus of the DOE-ARM MARCUS (Measurement of Aerosols, Radiation and CloUds over the Southern Oceans) and MICRE (Macquarie Island Cloud and Radiation Experiment) campaigns. In the SO, a deficit of INPs has been a leading hypothesis for why liquid clouds persist, which underlays the bias of global climate models in predicting excess shortwave radiation reaching the ocean surface between 55°S and Antarctica. In this study, we used the 6-month acquisition of INP data on four MARCUS cruises from Hobart, Tasmania, to Antarctica, and the single-location full annual INP cycle observed in MICRE, to gain a holistic, quantitative picture of the INP number concentrations as a function of temperature and their variability over SO latitudes from 43°S to Antarctica. Augmenting initial processing of filter collections of aerosol particles during MARCUS and MICRE, additional freezing studies following thermal treatment (to removes INPs associated with microbes) and peroxide treatment (to remove all organics), as well as ionic chemistry and total organic carbon analysis, were applied to samples to improve time and space resolution, and differentiate marine from terrestrial contributions. We also performed Next Generation Sequencing to determine that bacterial composition can tag periods of enhanced and degraded marine organic INPs and the relative lack of occurrence of land-sourced bio-particles. Through these and other analyses, INP data were categorized into representative source types (e.g., marine versus terrestrially-influenced). The products of our analyses are being used to parameterize ice formation for use in numerical modeling studies to determine if, and when, ocean-derived INPs control the microphysical composition and radiative balance of SO clouds in a manner not presently captured by global models. The specific objectives and approaches proposed were largely accomplished, including: 1) Additional and value-added chemical and biological analyses of archived samples of aerosols were completed to categorize and quantify INP types and concentrations over the SO. 2) Analyses were completed to place INP data in meteorological and aerosol context. 3) Sea spray aerosol INPs were demonstrated to dominate the SO region in all but episodic events. 4) New parameterizations for INP sources relevant to the SO were constructed. 5) Collaborative modeling studies demonstrating the crucial role of INPs in determining cloud radiative and precipitation properties were conducted with MARCUS and MICRE partners. Collaborative publication submissions in this regard ensued within the two year study. This work will advance the science of interactions of aerosols, clouds and precipitation, to improve their representation in regional and global climate models. Results have informed representation of primary ice crystal nucleation, give inference to the role of secondary processes, and improve investigations of aerosol influences on clouds via ice nucleation over SO high latitudes and similar vast ocean regions. Application will improve representation of such interactions for clouds in both regional and global climate models. The data base and analyses methods applied will continue to serve research studies in the future.

58 GEOSCIENCES↗

Arctic Mixed-Phase Cloud Base Ice Precipitation Properties Over the NSA Site

Cloud-climate feedbacks are still the greatest source of uncertainty in current climate projections. Arctic clouds, which are predominantly stratiform and supercooled, often long-lived, and nearly continuously precipitate ice particles, contribute roughly 10% of the uncertainty attributed to the global cloud feedback. This arctic cloud uncertainty is driven by incomplete observational and theoretical knowledge required to estimate and explain the state and active processes occurring in those clouds. A focus on ice precipitation properties at arctic cloud base rather than the surface deconfounds the product of cloud condensate sink processes from the influence of the atmospheric thermodynamic state below cloud base, rendering cloud-base properties a more appealing target for inference and evaluation of model simulations. This data set provides more than 1800 samples of cloud-base ice precipitation properties over Utqiagvik, North Slope of Alaska, all of which were retrieved using the synthesis of ARM radar and lidar measurements. The retrieved ice precipitation variables in this data set include, among others, the ice number concentration, water content, PSD parameters, precipitation rate, mass-weighted fall velocity, vertical air motion, and effective radius, all of which are highly valuable for model evaluation and a general understanding of polar cloud sink processes. Each variable sample includes its mean value and associated uncertainty. Additional variables based on ARM measurements (liquid layer statistics, etc.) are included in this data set. The retrieval algorithm and analysis of this data set are described in Silber (JGR, 2023, https://doi.org/10.1029/2022JD038202).

54 ENVIRONMENTAL SCIENCES↗