Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “hydrogen pathways”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 271 records · Page 15

Polyethylene Upcycling to Liquid Alkanes in Molten Salts under Neat and External Hydrogen Source-Free Conditions

Development of facile approaches to convert plastic waste into liquid fuels under neat conditions is highly desired but challenging, particularly without noble metal catalysts and an external hydrogen source. Herein, highly efficient and selective polyethylene-to-gasoline oil (branched C 6 –C 12 alkanes) conversion was achieved under mild conditions (<170 °C) using commercially available AlCl 3 -containing molten salts as reaction media and to provide catalytic sites (no extra solvents, additives, or hydrogen feeding). The high catalytic efficiency and selectivity was ensured by the abundant active Al sites with strong Lewis acidity (comparable to the Al type in acidic zeolite) and highly ionic nature of the molten salts to stabilize the carbenium intermediates. Dynamic genesis of the Al sites was elucidated via time-resolved Al K-edge soft X-ray and 27 Al NMR, confirming the tricoordinated Al 3+ as active sites and its coordination with the as-generated alkene/aromatic intermediates. Further, the carbenium formation and polyethylene chain variation was illustrated by inelastic neutron scattering (INS) and an isotope-labeling experiment. Theoretical simulations further demonstrated the successive hydride abstraction, β-scission, isomerization, and internal hydrogen transfer reaction pathway with AlCl 3 as active sites. This facile catalytic system can further achieve the conversion of robust, densely assembled, and high molecular weight plastic model compounds to liquid alkane products in the diesel range.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Competing sigmatropic shift rearrangements in excited allyl radicals

The competition between rearrangement of the excited allyl radical via a 1,3 sigmatropic shift versus sequential 1,2 shifts has been observed and characterized using isotopic substitution, laser excitation, and molecular beam techniques. Both rearrangements produce a 1-propenyl radical that subsequently dissociates to methyl plus acetylene. The 1,3 shift and 1,2 shift mechanisms are equally probable for CH{sub 2}CHCH{sub 2}, whereas the 1,3 shift is favored by a factor of 1.6 in CH{sub 2}CDCH{sub 2}. The translational energy distributions for the methyl and acetylene products of these two mechanisms are substantially different. Both of these allyl dissociation channels are minor pathways compared to hydrogen atom loss.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

2009 Photosynthesis to be held June 28 - July 3, 2009

The capture of solar energy by photosynthesis has had a most profound influence on the development and sustenance of life on earth. It is the engine that has driven the proliferation of life and, as the source of both energy and oxygen, has had a major hand in shaping the forms that life has taken. Both ancient and present day photosynthetic carbon fixation is intimately tied to issues of immediate human concern, global energy and global warming. Decreasing our reliance on fossil fuels by tapping photosynthesis in a more direct way is an attractive goal for sustainable energy. Meeting this challenge means understanding photosynthetic energy conversion at a molecular level, a task requiring perspectives ranging through all disciplines of science. Researchers in photosynthesis have a strong history of working across conventional boundaries and engaging in multidisciplinary collaborations. The Gordon conference in photosynthesis has been a key focal point for the dissemination of new results and the establishment of powerful research collaborations. In this spirit the 2009 Gordon conference on biophysical aspects of photosynthesis will bring together top international researchers from diverse and complementary disciplines, all working towards understanding how photosynthesis converts light into the stable chemical energy that powers so much of our world. Focal points for talks and discussions will include: (1) Watersplitting, structure and function of the oxygen evolving complex; (2) Antenna, the diversity, optimization and regulation of energy capture and transfer; (3) Reaction center structure and function, including functional roles for the protein; (4) Electron transport, proton transport and energy coupling; (5) Photoprotection mechanisms, including secondary electron transport pathways; (6) Biofuels, hydrogen production; and (7) Artificial photosynthesis and solar energy conversion strategies. The 2009 conference will have a close eye on practical applications of photosynthetic energy conversion. We are reaching out to share knowledge and perspectives with colleagues in fields that can contribute to the development of practical, sustainable solar energy conversion. The Gordon conference venue is ideally suited to the forging of new collaborations which can make the most of lessons learned from Nature's most successful energy source.

08 HYDROGEN↗

Interface and Pore Confinement Effects in the Pyrolysis of Phenethyl Phenyl Ether

Lignin, a complex biopolymer found in vascular plants and as the byproduct of pulping, is anticipated to be one of the next generation s resources for fuel and chemical feedstocks. To reach the point where lignin can efficiently be utilized, the products from its pyrolysis must be controlled, thus key factors in understanding what will maximize product yields and promote product selectivity must be investigated. We approach this problem through a systematic investigation starting with the simplest model compound that represents the dominant aryl glycerol--aryl ether interunit linkage in lignin, phenethyl phenyl ether, PhCH2CH2OPh (PPE). The decomposition of PPE at 375 C in the gas and solution phases is now well understood, and occurs through a free-radical chain pathway involving competitive hydrogen abstraction at the  or carbon, which leads to different products and is described as the - product selectivity. This selectivity not only depends on relevant substituents, but it is also sensitive to interactions with metal oxide surfaces. Furthermore, covalent confinement in a nanoporous silica, hydrogen bonding interactions with the surface, and changes in the local environment with co-attached spacer molecules all can influence the product selectivity significantly. Here we will describe the impact of pore confinement and pore size, metal oxide surface acidity, hydrogen bonding of oxygen functional groups at the interface, and the influence of organic molecular structure at the interface on the pyrolysis product selectivity of this important lignin linkage.

08 HYDROGEN↗

Experimental studies on the formation of D{sub 2}O and D{sub 2}O{sub 2} by implantation of energetic D{sup +} ions into oxygen ices

The formation of water (H{sub 2}O) in the interstellar medium is intrinsically linked to grain-surface chemistry; thought to involve reactions between atomic (or molecular) hydrogen with atomic oxygen (O), molecular oxygen (O{sub 2}), and ozone (O{sub 3}). Laboratory precedent suggests that H{sub 2}O is produced efficiently when O{sub 2} ices are exposed to H atoms (∼100 K). This leads to the sequential generation of the hydroxyperoxyl radical (HO{sub 2}), then hydrogen peroxide (H{sub 2}O{sub 2}), and finally H{sub 2}O and a hydroxyl radical (OH); despite a barrier of ∼2300 K for the last step. Recent detection of the four involved species toward ρ Oph A supports this general scenario; however, the precise formation mechanism remains undetermined. Here, solid O{sub 2} ice held at 12 K is exposed to a monoenergetic beam of 5 keV D{sup +} ions. Products formed during the irradiation period are monitored through FTIR spectroscopy. O{sub 3} is observed through seven archetypal absorptions. Three additional bands found at 2583, 2707, and 1195 cm {sup –1} correspond to matrix isolated DO{sub 2} (ν{sub 1}) and D{sub 2}O{sub 2} (ν{sub 1}, ν{sub 5}), and D{sub 2}O (ν{sub 2}), respectively. During subsequent warming, the O{sub 2} ice sublimates, revealing a broad band at 2472 cm{sup –1} characteristic of amorphous D{sub 2}O (ν{sub 1}, ν{sub 3}). Sublimating D{sub 2}, D{sub 2}O, D{sub 2}O{sub 2}, and O{sub 3} products were confirmed through their subsequent detection via quadrupole mass spectrometry. Reaction schemes based on both thermally accessible and suprathermally induced chemistries were developed to fit the observed temporal profiles are used to elucidate possible reaction pathways for the formation of D{sub 2}-water. Several alternative schemes to the hydrogenation pathway (O{sub 2}→HO{sub 2}→H{sub 2}O{sub 2}→H{sub 2}O) were identified; their astrophysical implications are briefly discussed.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

The Binding And Release of Oxygen And Hydrogen Peroxide are Directed 1 By a Hydrophobic Tunnel in Cholesterol Oxidase

The usage by enzymes of specific binding pathways for gaseous substrates or products is debated. The crystal structure of the redox enzyme cholesterol oxidase, determined at sub-angstrom resolution, revealed a hydrophobic tunnel that may serve as a binding pathway for oxygen and hydrogen peroxide. This tunnel is formed by a cascade of conformational rearrangements and connects the active site with the exterior surface of the protein. To elucidate the relationship between this tunnel and gas binding and release, three mutant enzymes were constructed to block the tunnel or its putative gate. Mutation of the proposed gating residue Asn485 to Asp or tunnel residue Phe359 or Gly347 to Trp or Asn reduces the catalytic efficiency of oxidation. The K mO 2 increases from 300 +/- 35 microM for the wild-type enzyme to 617 +/- 15 microM for the F359W mutant. The k cat for the F359W mutant-catalyzed reaction decreases 13-fold relative to that of the wild-type-catalyzed reaction. The N485D and G347N mutants could not be saturated with oxygen. Transfer of hydride from the sterol to the flavin prosthetic group is no longer rate-limiting for these tunnel mutants. The steady-state kinetics of both wild-type and tunnel mutant enzymes are consistent with formation of a ternary complex of steroid and oxygen during catalysis. Furthermore, kinetic cooperativity with respect to molecular oxygen is observed with the tunnel mutants, but not with the wild-type enzyme. A rate-limiting conformational change for binding and release of oxygen and hydrogen peroxide, respectively, is consistent with the cooperative kinetics. In the atomic-resolution structure of F359W, the indole ring of the tryptophan completely fills the tunnel and is observed in only a single conformation. The size of the indole is proposed to limit conformational rearrangement of residue 359 that leads to tunnel opening in the wild-type enzyme. Overall, these results substantiate the functional importance of the tunnel for substrate binding and product release.

36 MATERIALS SCIENCE↗

Hydrogen Production: Overview of Technology Options (January 2009)

By working together, government and industry can expedite progress in improving the efficiency and economics of hydrogen production. The FreedomCAR & Fuel Partnership brings together the U.S. Department of Energy (DOE), the major U.S. car manufacturers, energy companies, and utilities in advancing research and development (R&D) to enable high-volume production of affordable hydrogen-powered vehicles and their supporting infrastructure. The Partnership’s Hydrogen Production Technical Team has identified the R&D needs for seven key hydrogen production technologies in the Hydrogen Production Roadmap: Technology Pathways to the Future.

08 HYDROGEN↗

Hydrogen from Sunlight and Water: A Side-by-Side Comparison between Photoelectrochemical and Solar Thermochemical Water-Splitting

Photoelectrochemical (PEC) and solar thermochemical (STCH) water-splitting represent two promising pathways for direct solar hydrogen generation. PEC water-splitting integrates multiple functional materials and utilizes energetic electrons and holes generated from sunlight to produce hydrogen and oxygen in two half-reactions, while STCH water-splitting couples a series of consecutive chemical reactions and uses absorbed heat from sunlight to generate hydrogen and oxygen in two full reactions. In this Focus Review, the basic operating principles, sunlight utilization, device architecture, reactor design, instantaneous and annually averaged solar-to-hydrogen (STH) conversion efficiency, and the operating conditions and constraints of both pathways are compared. A side-by-side comparison addresses some common sources of confusion and misinterpretation, especially in the evaluation of STH conversion efficiencies, and reveals distinct features and challenges in both PEC and STCH technologies. Furthermore, this Focus Review also addresses materials and device challenges in PEC and STCH for cost-competitive hydrogen generation.

08 HYDROGEN↗

Microwave-Assisted Hydrogen Generation from Hydrocarbon-Bearing Reservoir Rocks: Stage-Dependent Thermal Runaway and In-Situ Carbonate Engineering

Microwave-assisted hydrogen generation from hydrocarbon-bearing reservoir rocks is strongly influenced by mineralogy, methane activation, carbonate reactions, and thermal runaway behavior. This study investigates a new approach in which carbonate phases are generated in-situ through the reaction of internally produced CO2 with Ca(OH)2 under microwave heating conditions. The objective is to evaluate how rock mineralogy, methane injection, and Ca(OH)2 addition influence hydrogen generation, carbon redistribution, and stage-dependent reaction pathways during microwave exposure. Microwave heating experiments were conducted using Permian Basin reservoir rocks under three experimental conditions: rock-only experiments under Ar atmosphere, CH4–Ar experiments without additive, and CH4–Ar experiments containing 5 wt% Ca(OH)2. Methane-assisted experiments were performed under continuous injection of 30 standard cubic centimeters per minute (sccm) CH4 and 30 sccm Ar. Based on thermal runaway behavior, each experiment was divided into three operational stages: Before Thermal Runaway (BR), After Thermal Runaway–Decrease in Microwave Power (ARD), and After Thermal Runaway– Increase in Microwave Power (ARI). Temperature and gas composition were continuously monitored throughout the experiments. The rock-only experiments demonstrated that hydrogen generation can occur intrinsically from hydrocarbon-bearing rocks under microwave heating, even without externally injected methane. However, hydrogen production did not correlate solely with kerogen content, indicating that mineralogy strongly influences hydrogen-generation pathways. Correlation analyses suggested that kerogen decomposition initially generated CH4, CO, and CO2, followed by secondary hydrocarbon reactions associated with H2 and C2 hydrocarbon formation. Methane-assisted experiments substantially increased hydrogen production; however, identical methane injection rates produced significantly different hydrogen yields among the rock samples, confirming that mineralogical composition controls methaneconversion behavior under microwave heating conditions. The addition of Ca(OH)2 significantly altered carbon evolution behavior in a stage-dependent manner. During the BR stage, Ca(OH)2 reduced gas-phase CO2 production, particularly in carbonate-rich rocks, indicating favorable conditions for in-situ carbonation and carbonate deposition prior to extensive thermal decomposition. The suppression of CO2 during BR became more pronounced with increasing carbonate content of the rock system. After thermal runaway, carbonate-containing systems exhibited enhanced hydrogen generation behavior, suggesting that carbonatederived mineral transformations and carbonate-mediated reactions contribute to high-temperature hydrogen-generation pathways. In carbonate-poor rocks, Ca(OH)2 addition enabled simultaneous URTeC 4493775 2 enhancement of hydrogen production and partial suppression of CO2 release during the post-runaway stages. Overall, the results demonstrate that microwave-assisted hydrogen generation is governed by dynamically evolving interactions among kerogen decomposition, methane activation, mineral transformations, carbonate formation/decomposition, and thermal runaway behavior. This work introduces in-situ carbonate engineering with Ca(OH)2 as a strategy for coupling hydrogen generation with partial insitu carbon management under microwave heating conditions.

03 NATURAL GAS↗

One dislocation at a time

The direct observation of enhanced dislocation mobility in iron by in situ electron microscopy offers key insights and adds to the ongoing debate on the mechanisms of hydrogen embrittlement. The tiniest atom in nature, hydrogen, is pervasive and sneaky. When hydrogen atoms, either from gas or liquid sources, come into contact with a metal, they rush into the solid and squeeze through the narrow spaces between the host atoms. Being chemically active, atomic hydrogen can potentially bind to either host or impurity atoms, forming hydrides and thus changing a material’s properties. Metals, which are well known and widely used in industry for their strength and ductility, can become dangerously brittle when exposed to hydrogen. Furthermore, this phenomenon is known as hydrogen embrittlement and can lead to catastrophic failure of a load-bearing part. For example, the hydrogen produced when water molecules break apart in coolants in a nuclear reactor can cause sudden failure of the pressure vessel. In another example, although blending hydrogen in natural-gas pipelines provides a promising pathway to transition into the hydrogen economy, it could lower the fatigue resistance of the pipeline steel, making it more susceptible to crack growth due to cyclic loading induced by pressure fluctuations in the pipeline. Remarkably, perhaps as a result of a multitude of recognized failure mechanisms in which hydrogen can potentially participate, it still remains unknown exactly why hydrogen makes a metal brittle. Now, writing in Nature Materials, Longchao Huang and colleagues present unambiguous experimental observations of hydrogen-enhanced dislocation mobility in iron, offering key insights into the hydrogen embrittlement mechanisms.

36 MATERIALS SCIENCE↗

Hydrogen and the Global Energy Transition—Path to Sustainability and Adoption across All Economic Sectors

This perspective article delves into the critical role of hydrogen as a sustainable energy carrier in the context of the ongoing global energy transition. Hydrogen, with its potential to decarbonize various sectors, has emerged as a key player in achieving decarbonization and energy sustainability goals. This article provides an overview of the current state of hydrogen technology, its production methods, and its applications across diverse industries. By exploring the challenges and opportunities associated with hydrogen integration, we aim to shed light on the pathways toward achieving a sustainable hydrogen economy. Additionally, the article underscores the need for collaborative efforts among policymakers, industries, and researchers to overcome existing hurdles and unlock the full potential of hydrogen in the transition to a low-carbon future. Through a balanced analysis of the present landscape and future prospects, this perspective article aims to contribute valuable insights to the discourse surrounding hydrogen’s role in the global energy transition.

08 HYDROGEN↗

Atmospheric-pressure ammonia synthesis on AuRu catalysts enabled by plasmon-controlled hydrogenation and nitrogen-species desorption

The Haber–Bosch process for ammonia synthesis contributes up to ~3% of global greenhouse gas emissions. Plasmonic catalysts strongly concentrate light and can alter the reaction intermediates via out-of-equilibrium processes, providing the potential for an alternative, less-energy-intensive pathway to synthesize ammonia. Here, in this study, we show that gold-ruthenium (AuRu) bimetallic nanoparticles can synthesize ammonia at room temperature and pressure using visible light. We create AuRu alloys with varying compositions and achieve ammonia production rates of ~60 μmol per gram of catalyst bed per hour. In situ infrared spectroscopy reveals that light accelerates the hydrogenation of nitrogen intermediates compared to conventional thermal catalysis. Through computational modelling, we demonstrate that photo-excited electrons enable associative hydrogenation pathways for nitrogen activation rather than direct nitrogen–nitrogen bond breaking. This light-assisted mechanism requires both hydrogen and light working together to overcome the nitrogen activation barrier, mimicking how biological enzymes produce ammonia naturally and providing fundamental insights for developing sustainable, energy-efficient chemical synthesis.

Yuan, Lin [Stanford Univ., CA (United States)] (OR↗

Solid Oxide Electrolysis for Hydrogen Production: From Oxygen Ion to Proton Conducting Cells

Electrochemical splitting of water, using solid oxide electrolysis cells (SOEC), offers an economic and efficient pathway for large scale hydrogen production that not only utilizes renewable energy but also allows both distributed and centralized hydrogen production to accelerate and enable hydrogen infrastructure for mobility. In this technical contribution, two types of electrochemical systems using conventional oxygen ion conducting (O-SOEC) and newly developed proton conducting (P-SEOC) has been compared in terms of hydrogen purity, electrochemical performance, and stability (structural and electrochemical). The observations on dopant exsolution, solid-solid (electrode/electrolyte interface) and solid-gas (electrode-H2O, O2,and H2) interactions have been presented. The composition, structure, and morphology changes and their roles on electrochemical performance and electrode stability in oxidizing (O2) and reducing (H2) atmospheres has been discussed.

SOEC, solid oxide electrolysis, proton conductor, ↗

Nanostructures from hydrogen and helium implantation of aluminum.

This study investigates a pathway to nanoporous structures created by hydrogen and helium implantation in aluminum. Previous experiments for fusion applications have indicated that hydrogen and helium ion implantations are capable of producing bicontinuous nanoporous structures in a variety of metals. This study focuses specifically on implantations of hydrogen and helium ions at 25 keV in aluminum. The hydrogen and helium systems result in remarkably different nanostructures of aluminum at the surface. Scanning electron microscopy, focused ion beam, and transmission electron microscopy show that both implantations result in porosity that persists approximately 200 nm deep. However, hydrogen implantations tend to produce larger and more irregular voids that preferentially reside at defects. Implantations of helium at a fluence of 10{sup 18} cm{sup -2} produce much smaller porosity on the order of 10 nm that is regular and creates a bicontinuous structure in the porous region. The primary difference driving the formation of the contrasting structures is likely the relatively high mobility of hydrogen and the ability of hydrogen to form alanes that are capable of desorbing and etching Al (111) faces.

08 HYDROGEN↗

Fundamental Studies of Bifunctional Catalysts for Tandem Reactions

During the past few years of our funding from DOE Basic Energy Sciences, we have focused on the catalytic conversion of biomass-derived 5-hydroxymethyl furfural (HMF) as a platform molecule for sustainable synthesis of value-added chemicals. The combination of the diene and aldehyde functionalities in HMF enables catalytic production of acetalized HMF derivatives with diol or epoxy reactants to allow reversible synthesis of norcantharimide derivatives upon Diels-Alder reaction with maleimides. Whereas the electron-withdrawing nature of aldehyde group inhibits the reactivity of diene group in HMF to undergo Diels-Alder reactions with dienophiles, by converting the aldehyde group in HMF to an electron-donating hydroxyl group, HMF can append maleimide-based chemicals through Diels-Alder coupling. Acetalization of HMF not only produces an electron-rich diene for Diels-Alder reaction, but it also alters the reversibility of acetal formation and thereby allows for the controlled release of chemicals by hydrolysis. Therefore, we synthesized various norcantharimide derivatives from biomass-derived HMF by acetalization over an acid catalyst, Amberlyst-15, followed by Diels-Alder reaction with maleimide. The norcantharimides release the starting materials by retro Diels-Alder reaction that is triggered by acetal hydrolysis under acidic (≤pH 3) conditions. In subsequent work, we explored the synthesis and properties of functional polyurethanes and polyesters with tunable properties from biomass-derived (HMF)-Acetone-HMF (HAH) monomers. HAH can be selectively hydrogenated over Cu and Ru catalysts to produce partially-hydrogenated HAH (PHAH) and fully-hydrogenated HAH (FHAH). HAH contains functional groups, including hydroxyl, furan, enone, and ketone functionalities, that can be exploited to further tune the polymer properties. The π-electron conjugation between the enone and furan groups in HAH monomer stabilizes the furan group to prevent the uncontrolled degradation of furans during reactions, such as etherification. Therefore, HAH is a renewable monomer that can be used to synthesize polymers, having high molecular weight, symmetric functionalities, an inexpensive production price, and being derived from renewable resources without competition with food resources. We demonstrated the synthesis of functional polyurethanes and a renewable polyester from HAH-derived monomers, and 4,4’-methylenebis(phenyl isocyanate) (MDI). We showed that it is essential to be able to selective hydrogenate C=C double bonds in HAH to be able to achieve effective Diels Alder reactions of the furan ring. Therefore, we studied the hydrogenation at temperatures from 313 – 393 K of HAH over Pd, Ru, and Cu based catalysts. HAH was selectively hydrogenated to produce partially-hydrogenated monomers (PHAH) over Cu and Ru catalysts and to fully-hydrogenated HAH monomers (FHAH) over the Ru catalyst. Pd based catalysts yielded a mixture of partially and fully hydrogenated monomers. Reaction kinetics models were employed to quantify the kinetic behavior for hydrogenation over Ru, Cu, and Pd catalysts. A 5-step pathway exhibited over Pd and Ru catalysts consists of both series and parallel reaction steps, where HAH is both converted to fully hydrogenated products sequentially via series reactions of partially hydrogenated intermediates, as well as converted directly in parallel reactions to form the fully hydrogenated products. In contrast, a 3-step pathway over the Cu catalyst consists only of the consecutive reaction steps, where the final product was formed via series reactions of intermediate products. Additionally, reaction over the Cu catalyst did not hydrogenate the furan rings of the HAH molecule and yielded a different final product than those hydrogenation over Pd and Ru catalysts. Using the results from our detailed reaction kinetics studies, we developed universal conditions for the maximum production of the various hydrogenated products for both batch and plug flow systems. In subsequent work, we employed reaction schemes to optimize the yields of products from selective hydrogenations of HAH in isopropanol solvent and in the presence of liquid water. Reaction schemes consisting of 7, 9, and 11 steps were examined to describe the rates of formation of the observed products and reaction intermediates for hydrogenation of HAH over Ru and Pd catalysts, and a 3-step scheme was studied over Cu catalysts. Rate constants and activation energies were calculated using these reaction schemes, and we then apply these reaction schemes to explore the effects of water addition on the hydrogenation pathways. The effects of water addition to isopropanol (IPA) solvents on the hydrogenation of HAH were markedly different over Pd, Ru, and Cu catalysts. Over the Pd catalyst, the addition of water to IPA increased hydrogenation rates and promoted hydrogenation of furan rings. The addition of water to IPA yielded significant carbon losses over the Ru catalyst, and slowed hydrogenation steps over Cu, while significantly inhibiting hydrogenation of the ketone group. This behavior opened routes toward increased production rates of PHAH=O (a partially hydrogenated form of HAH containing a C=O bond), a product in which the diene groups of the furan rings were not hydrogenated. Addition of water also allowed increased feed concentrations of HAH that were previously not possible in pure IPA solvents.

09 BIOMASS FUELS↗