Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “height estimation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 271 records · Page 15

Atmospheric Turbulence Estimates from a Pulsed Lidar

Estimates of the eddy dissipation rate (EDR) were obtained from measurements made by a coherent pulsed lidar and compared with estimates from mesoscale model simulations and measurements from an in situ sonic anemometer at the Denver International Airport and with EDR estimates from the last observation time of the trailing vortex pair. The estimates of EDR from the lidar were obtained using two different methodologies. The two methodologies show consistent estimates of the vertical profiles. Comparison of EDR derived from the Weather Research and Forecast (WRF) mesoscale model with the in situ lidar estimates show good agreement during the daytime convective boundary layer, but the WRF simulations tend to overestimate EDR during the nighttime. The EDR estimates from a sonic anemometer located at 7.3 meters above ground level are approximately one order of magnitude greater than both the WRF and lidar estimates - which are from greater heights - during the daytime convective boundary layer and substantially greater during the nighttime stable boundary layer. The consistency of the EDR estimates from different methods suggests a reasonable ability to predict the temporal evolution of a spatially averaged vertical profile of EDR in an airport terminal area using a mesoscale model during the daytime convective boundary layer. In the stable nighttime boundary layer, there may be added value to EDR estimates provided by in situ lidar measurements.

Pruis, Matthew J.↗

The First Ground Level Enhancement Event of Solar Cycle 24: Direct Observation of Shock Formation and Particle Release Heights

We report on the 2012 May 17 ground level enhancement (GLE) event, which is the first of its kind in solar cycle 24. This is the first GLE event to be fully observed close to the surface by the Solar Terrestrial Relations Observatory (STEREO) mission.We determine the coronal mass ejection (CME) height at the start of the associated metric type II radio burst (i.e., shock formation height) as 1.38 Rs (from the Sun center). The CME height at the time of GLE particle release was directly measured from a STEREO image as 2.32 Rs, which agrees well with the estimation from CME kinematics. These heights are consistent with those obtained for cycle-23 GLEs using back-extrapolation. By contrasting the 2012 May 17 GLE with six other non-GLE eruptions from well-connected regions with similar or larger flare sizes and CME speeds, we find that the latitudinal distance from the ecliptic is rather large for the non-GLE events due to a combination of non-radial CME motion and unfavorable solar B0 angle, making the connectivity to Earth poorer. We also find that the coronal environment may play a role in deciding the shock strength.

CMEs↗

Stereoscopic observations of hurricanes and tornadic thunderstorms from geosynchronous satellites

Results are presented which show the application of GOES stereoscopy to the investigation of hurricanes and tornadic thunderstorms. Stereo cloud top height contour maps were constructed to observe the structural evolution of two hurricanes, Frederic on September 12, 1979 and Allen on August 8, 1980, and a tornadic thunderstorm complex over Oklahoma on May 2-3, 1979. Stereo height contours of Hurricane Allen reveal a very intense and symmetric storm with a circular shaped central dense overcast with an average height of 16.5 km. Contours of Hurricane Frederic reveal a preferred region for convection with an explosive exhaust tower attaining a maximum height of 17.8 km. Also presented is a technique for estimating tropical cyclone intensity using GOES stereo height and IR temperature information. Results indicate vertical motions ranging from 4.4 m/s for a moderate storm to 7.7 m/s for an intense storm.

Mack, R.↗

Analysis of altimetry over inland seas

Satellite-based altimetric data taken by GEOS-3 and SEASAT over the Black Sea and Caspian Sea are analyzed and a least squares collocation technique is used to predict the geoid undulation on a .25-degree by .25-degree grid and to transform these geoid undulations to free air gravity anomalies. This project entailed processing satellite altimeter data over inland seas for recovery of area mean gravity information. Gravity information in this area of the world is not readily available, so the possibility of obtaining it from the processing of altimeter observations is attractive. The principal objective was to complete and extend analyses done in a previous study, verify those results, and document the results and techniques. A secondary objective was to improve the algorithms and results, if possible. The approach used involved editing geoid height data to remove overland data; evaluating geoid height differences at crossover points; removing orbit errors from geoid heights using crossover differences; gridding geoid height data at .25-degree by .25-degree intervals; and estimating the gravity anomalies from gridded geoid heights using the collocation technique.

Au, A. Y.↗

Wind streaks on Mars: Comparisons of production models with observations of bright streaks

To investigate the influence of crater size on martian wind streaks, the characteristics of bright streaks associated with craters ranging from approximately 100 m to 80 km in diameter were analyzed in several regions. The ratio of streak length to obstacle height (L/h) could be diagnostic of the relative effectiveness of different sized obstacles in disturbing near surface atmospheric flow; since the crater rim height to diameter relationship has not previously been determined for Mars, the rim heights of numerous craters were estimated from shadow measurements. In all areas studied, bright streak L/h values decrease with increasing h, indicating that smaller obstacles produce longer streaks relative to their height than do larger obstacles. Several models of bright streak production are used to explain this behavior are discussed.

Lee, S. W.↗

Synoptic/planetary-scale interactions and blocking over the North Atlantic Ocean

Work was completed on the height tendency diagnoses of two extratropical cyclones that occurred upstream from the blocking event studied previously. One developed explosively over water 60 to 36 hours before the block first appeared, while the second developed explosively over the southeastern United States during the time of block formation. In both cases, both vorticity and temperature advection were consistently important forcing mechanisms. This is in contrast to the block itself, in which vorticity advection was easily the dominant forcing mechanism. Latent heat release was also significant, accounting for about 50 percent of the total height falls in the cyclone below 850 mb. Estimates of latent heat release were greatly enhanced by coupling parameterized estimates with values derived from GOES IR data using an algorithm developed by Marshall's F. R. Robertson. Among the difficulties encountered in this work was the identification of an appropriate lower boundary condition for the solution of the height tendency equation. The zero value currently used tends to yield underestimates of the lower troposphere height tendencies. To address this problem a new diagnostic technique was developed in cooperation with Dr. Peter Zwack of the University of Quebec at Montreal. Based on an equation Dr. Zwack had previously developed (the Zwack-Okossi development equation), researchers now have a relationship that is completely consistent with the height tendency equation and provides estimates of lower boundary geostrophic vorticity or height tendencies. Finally, comparison of the SAT (satellite data) and NOSAT (no satellite data) analyses is progressing well. The present focus is on both the new diagnostic technique and the SAT/NOSAT comparisons. The former is being tested on the southeastern United States cyclone case previously mentioned and compared with the height tendency diagnoses already completed. The latter are being examined for the blocking case described in the publications cited in this summary. In addition to obtaining statistics that will allow general comparison of the two analyses, it will be possible to determine whether conclusions about the dynamics of the block development are influenced by the analysis set used.

Smith, Phillip J.↗

The corrections for significant wave height and attitude effects in the TOPEX radar altimeter

The routine ground processing of data from the NASA radar altimeter of TOPEX/POSEIDON includes instrument corrections for the effects of significant wave height and attitude angle changes on the altimeter's estimates of range, backscattered power, and significant wave height. This paper describes how these instrument corrections were generated and how they are applied. Detailed waveform fitting to telemetered waveform samples is use to assess the effectiveness of the corrections. There are several altimeter hardware-caused small waveform departures from the model waveforms and these departures, designated waveform 'features', are described in detailed. A consequence of the waveform features, and their positioning relationship to range rate, is that range data for ground tracks moving toward the equator may differ systematically by about a centimeter compared to range data for ground tracks moving away from the equator. The results and discussion are limited to side A of the redundant altimeter, as only side A has been operated on orbit.

Hayne, G. S.↗

Lidar observations of wave-like structure in the atmospheric sodium layer

The University of Illinois (Urbana) lidar system has been developed to study the atmospheric sodium layer near 90 km altitude through the mechanism of resonance scattering. The photocount data are processed using digital smoothing filters to obtain continuous estimates of the sodium density versus altitude. The filter cutoff frequency is related to the height resolution and accuracy of the estimated profile. Lidar photocount data processed using this filtering technique show wave-like structures in the sodium layer which move downward with time. The waves have typical wavelengths of 3-15 km and phase velocities of less than 1 m/sec. The movement of these structures seems to be independent of the motion of the bottomside of the layer, which also has been observed to move up or down by as much as 2 km over a period of a few hours.

Rowlett, J. R.↗

Lidar observation of the mesospheric sodium layer over Urbana, Illinois

Atmospheric sodium has been observed over Urbana (40 deg 10 min N, 88 deg 10 min W) using a monostatic lidar tuned to 589.0 nm. The photocount data are processed using ditital smoothing filters to obtain continuous estimates of the sodium density versus altitude. The filter cutoff frequency is related to the height resolution and accuracy of the estimated profile. Wavelike structures in the sodium layer have been observed with typical wavelengths of 3-15 km and phase velocities of 1-3 m/s. The layer is characterized by a sharp falloff on the bottomside and often an undulatory motion of the bottomside of the layer accompanies the wave motion. The topside gradient of the layer is frequently observed to decrease through the night.

Richter, E. S.↗

A laboratory investigation into microwave backscattering from sea ice

The sources of scattering of artificial sea ice were determined, backscatter measurements semi-quantitatively were compared with theoretical predictions, and inexpensive polarimetric radars were developed for sea ice backscatter studies. A brief review of the dielectric properties of sea ice and of commonly used surface and volume scattering theories is presented. A description is provided of the backscatter measurements performed and experimental techniques used. The development of inexpensive short-range polarimetric radars is discussed. The steps taken to add polarimetric capability to a simple FM-W radar are considered as are sample polarimetric phase measurements of the radar. Ice surface characterization data and techniques are discussed, including computation of surface rms height and correlation length and air bubble distribution statistics. A method is also presented of estimating the standard deviation of rms height and correlation length for cases of few data points. Comparisons were made of backscatter measurements and theory. It was determined that backscatter from an extremely smooth saline ice surface at C band cannot be attributed only to surface scatter. It was found that snow cover had a significant influence on backscatter from extremely smooth saline ice at C band.

Bredow, Jonathan W.↗

New vertical geodesy

The paper contains a review of the theoretical difference between orthometric heights and heights labeled geometric which are determined through use of an extraterrestrial frame of reference. The theory is supplemented with examples which portray very long baseline interferometry as a measuring system that will provide estimates of vertical crustal motion which are radically improved in comparison with those obtained from analysis of repeated geodetic levelings. The example of the San Fernando earthquake of 1971 is used to show how much estimates of orthometric and geometric height change might differ. A comment by another author is appended which takes issue with some of the conclusions of this paper. In particular, an attempt is made in the comment to rebut the conclusion that geodetic leveling is less reliable than VLBI measurements for determining relative elevation change of points separated by more than 56 km.

Whitcomb, J. H.↗

On the unification of geodetic leveling datums using satellite altimetry

Techniques are described for determining the height of Mean Sea Level (MSL) at coastal sites from satellite altimetry. Such information is of value in the adjustment of continental leveling networks. Numerical results are obtained from the 1977 GEOS-3 altimetry data bank at Goddard Space Flight Center using the Bermuda calibration of the altimeter. Estimates are made of the heights of MSL at the leveling datums for Australia and a hypothetical Galveston datum for central North America. The results obtained are in reasonable agreement with oceanographic estimates obtained by extrapolation. It is concluded that all gravity data in the Australian bank AUSGAD 76 and in the Rapp data file for central North America refer to the GEOS-3 altimeter geoid for 1976.0 with uncertainties which do not exceed + or - 0.1 mGal.

Mather, R. S.↗

A life history method for estimating convective rainfall

The remote sensing of rain amounts is of great interest for a great variety of operational applications, including hydrology, hydroelectricity and agriculture is discussed. The microwave radiometer represents the most obvious technique, however, poor spatial and temporal resolution, together with the problems associated with the estimation of effective rain layer height make visible and IR techniques more promising at the present time. Based on bivariate frequency distribution of brightness versus temperature, brightness enhancing or infrared technique alone may be inadequate to deduce details of convective activity. It is implied that better estimates of rainfall will come from visible and IR observations combined than from either used alone. The technique identifies clouds with high probability of rain as those which have large optical and presumably physical thickness as measured by the visible albedo in comparison with their height, determined by the intensity of the IR emission.

Martin, D. W.↗

Geoid height-age relation from Seasat altimeter profiles across the Mendocino Fracture Zone

Twenty-eight Seasat altimeter profiles crossing the Mendocino Fracture Zone are used together with seafloor ages determined from magnetic lineations to estimate the change in oceanic geoid height with age, between ages of 15 and 135 m.y. An unbiased estimate of the overall geoid offset along each profile is determined from a least-squares fit of the along-track derivative of the geoid to the geoid slope predicted from a simple two-layer gravitational edge effect model. Uncertainties based upon the statistical properties of each profile are also determined. A geoid slope-age relation is constructed by normalizing the geoid offsets and uncertainties by the age offsets. The results are in agreement with geoid slope-age relations determined from symmetrically spreading ridges (Sandwell and Schubert, 1980). However, the fracture zone estimates have smaller uncertainties and show less scatter. A comparison of these results with the geoid slope-age prediction of the boundary layer cooling model shows that the thermal structure begins to deviate from this model at an early age (20-40 m.y.). A plate cooling model with a thickness of 125 km is most compatible with the geoid slope-age estimates, although significant deviations occur; these may indicate that the lithospheric thermal structure is not entirely age dependent.

Sandwell, D. T.↗

Determining forest canopy characteristics using airborne laser data

A study is reported in which a profiling laser system flown at relatively low altitudes over a forested area was used to measure various forest canopy attributes, including tree heights. An analysis of the data obtained indicates that canopy closure is most strongly related to the penetration capability of the laser pulse, with the pulses attenuated more quickly in a dense canopy. Laser estimates of the average tree heights differ by less than 1 m from the photogrammetrically acquired values. It is concluded that the laser system is suitable for remotely sensing the vertical forest canopy profile. Elements of this profile are linearly related to crown closure and can be used to assess tree height.

Nelson, R.↗

The ICESat-2 Laser Altimetry Mission

Satellite and aircraft observations have revealed that remarkable changes in the Earth s polar ice cover have occurred in the last decade. The impacts of these changes, which include dramatic ice loss from ice sheets and rapid declines in Arctic sea ice, could be quite large in terms of sea level rise and global climate. NASA's Ice, Cloud and Land Elevation Satellite-2 (ICESat-2), currently planned for launch in 2015, is specifically intended to quantify the amount of change in ice sheets and sea ice and provide key insights into their behavior. It will achieve these objectives through the use of precise laser measurements of surface elevation, building on the groundbreaking capabilities of its predecessor, the Ice Cloud and Land Elevation Satellite (ICESat). In particular, ICESat-2 will measure the temporal and spatial character of ice sheet elevation change to enable assessment of ice sheet mass balance and examination of the underlying mechanisms that control it. The precision of ICESat-2's elevation measurement will also allow for accurate measurements of sea ice freeboard height, from which sea ice thickness and its temporal changes can be estimated. ICESat-2 will provide important information on other components of the Earth System as well, most notably large-scale vegetation biomass estimates through the measurement of vegetation canopy height. When combined with the original ICESat observations, ICESat-2 will provide ice change measurements across more than a 15-year time span. Its significantly improved laser system will also provide observations with much greater spatial resolution, temporal resolution, and accuracy than has ever been possible before.

Abdalati, Waleed↗

Mean pressure distribution and geostrophic circulation in the meteor zone

Boutko et al., used available satellite radiometer data to estimate 0.1 mb constant pressure heights in the mesosphere and Koshelkov and Kovshova derived, 0.1 to 0.005 mb or 0.1 to 0.001 mb layer thickness from which were compiled height fields of the 0.005 mb and 0.001 mb levels. The close relationship discovered between mean thicknesses and zonal values of atmospheric radiances observed in channel 3000 of the pressure modulated radiometer was used. An analysis of the geopotential height fields in the lower thermosphere of the Southern Hemisphere was carried out by others. The Northern Hemisphere patterns are analyzed herein. The analysis was limited to regions north of 20 N due to poor reliability of the thickness estimates from the radiometer data at low latitudes. These analyses are discussed.

Koshelkov, Yu. P.↗

Assessment of the Sentinel-6Michael Frielich extension to the TOPEX/Jason Sea Surface Height Climate Data Record referenced to ITRF2020

The recent launch of Sentinel-6 Michael Freilichoffers the possibility of continuing global mean sea level (GMSL) monitoring well into the currentdecade. In this presentation we report Sentinel-6/Jason-3inter-mission bias estimates based on direct sea surface height (SSH) collinear differences of near coincident measurements during the verification phase, and with comparisons to a global network of tide gauges. In an effort to provide a more consistent SSH time series and seamlesstransition to Sentinel-6, we have generated orbits for the entire time span based on the revised ITRF2020terrestrial reference frame.We reportthe efficacy ofcorrection algorithm revisions leading to the development of the NASA MEaSURE’s V6.0 sea surface height Climate Data Record(MEaSUREs -Integrated Multi-Mission Ocean Altimeter Data for Climate Research (MEaSUREs-SSH) | PO.DAAC / JPL / NASA).We provide an assessment of recent improvements to the accuracy of the 30+ year sea surface height time series, describe continuing calibration/validation activities, and evaluate the subsequent impact on current global mean sea level estimates, and the accounting of the ocean mass budget.

B D Beckley↗