Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “harmonic analysis”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 271 records · Page 15
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

Analysis of Inter Converter Interactions using Harmonic State Space Modeling

Power converters have become a key participant within the modern grid, facilitating the grid's interaction with renewable energy sources and various loads, among others. These converters can also interact with each other, creating harmonics that were previously absent in the grid. While some previous research studies have focused on inter-converter interactions, not much focus has been on the role of pulse width modulators in these inter-converter interactions. This paper focuses on the issue and builds upon harmonic state-space modeling (HSS) to observe inter-converter harmonic interactions. A new modulator model is developed, and its implementation within HSS modeling to observe harmonic coupling between multiple inverters is highlighted. A simulation testbench is developed, and to verify the advantages and limitations of the proposed modeling approach, it is compared with two other traditional modeling methods: namely, average and switching models. The proposed method is shown to be significantly more accurate and informative than conventional average modeling methods and has considerably lower computation costs and simulation time than detailed switching models. The results are verified using extensive simulations on MATLAB.

Xue, Yaosuo↗
NASA NTRS1991

An evaluation of HEMT potential for millimeter-wave signal sources using interpolation and harmonic balance techniques

A large-signal analysis method based on an harmonic balance technique and a 2-D cubic spline interpolation function has been developed and applied to the prediction of InP-based HEMT oscillator performance for frequencies extending up to the submillimeter-wave range. The large-signal analysis method uses a limited number of DC and small-signal S-parameter data and allows the accurate characterization of HEMT large-signal behavior. The method has been validated experimentally using load-pull measurement. Oscillation frequency, power performance, and load requirements are discussed, with an operation capability of 300 GHz predicted using state-of-the-art devices (fmax is approximately equal to 450 GHz).

Kwon, Youngwoo↗
NASA NTRS1990

The development and analysis of geopotential coefficient models to spherical harmonic degree 360

Two new geopotential coefficient models to spherical harmonic degree 360 are developed using recent advances made in theoretical modeling methods, satellite gravitational models, and expanded and improved terrestrial data. The new models are based on the combination of a satellite potential coefficient model (GEM-T2) to degree 50 with 30-arc mean gravity anomalies, yielding an adjusted set of coefficients and gravity anomalies, which were then harmonically analyzed to yield a set of potential coefficients to degree 360. The models were verified in several ways including satellite orbit residual analysis, demonstrating a substantial improvement over previous high-degree expansions.

Rapp, Richard H.↗
NASA NTRS1990

Correlating the EMC analysis and testing methods for space systems in MIL-STD-1541A

A study was conducted to improve the correlation between the electromagnetic compatibility (EMC) analysis models stated in MIL-STD-1541A and the suggested testing methods used for space systems. The test and analysis methods outlined in MIL-STD-1541A are described, and a comparative assessment of testing and analysis techniques as they relate to several EMC areas is presented. Suggestions on present analysis and test methods are introduced to harmonize and bring the analysis and testing tools in MIL-STD-1541A into closer agreement. It is suggested that test procedures in MIL-STD-1541A must be improved by providing alternatives to the present use of shielded enclosures as the primary site for such tests. In addition, the alternate use of anechoic chambers and open field test sites must be considered.

Perez, Reinaldo J.↗
NASA NTRS1992

Analysis of rotor vibratory loads using higher harmonic pitch control

Experimental studies of isolated rotors in forward flight have indicated that higher harmonic pitch control can reduce rotor noise. These tests also show that such pitch inputs can generate substantial vibratory loads. The modification is summarized of the RotorCRAFT (Computation of Rotor Aerodynamics in Forward flighT) analysis of isolated rotors to study the vibratory loading generated by high frequency pitch inputs. The original RotorCRAFT code was developed for use in the computation of such loading, and uses a highly refined rotor wake model to facilitate this task. The extended version of RotorCRAFT incorporates a variety of new features including: arbitrary periodic root pitch control; computation of blade stresses and hub loads; improved modeling of near wake unsteady effects; and preliminary implementation of a coupled prediction of rotor airloads and noise. Correlation studies are carried out with existing blade stress and vibratory hub load data to assess the performance of the extended code.

Quackenbush, Todd R.↗
DOE OSTI2026

Eliminating beam-induced depolarizing effects in the hydrogen jet target for high-precision proton beam polarimetry at the electron-ion collider

We analyze beam-induced depolarizing effects in the hydrogen jet target (HJET) at the relativistic heavy ion collider (RHIC), which has been used for absolute hadron beam polarimetry and shall be employed at the electron-ion collider (EIC). The EIC’s higher bunch repetition frequencies and shorter bunch durations shift beam harmonics to frequencies that can resonantly drive hyperfine transitions in hydrogen, threatening to depolarize the target atoms. Using frequency-domain analysis of beam harmonics and hyperfine transition frequencies, we establish a photon emission threshold above which beam-induced fields are too weak to cause significant depolarization. For EIC injection (23.5 GeV) and flattop (275 GeV), beam-induced depolarization through the bunch structure renders operation at the current RHIC magnetic guide field at the target (𝐵 0 =120⁢ mT) untenable. Increasing the magnetic guide field at the target to 𝐵 0 ≈ 400⁢ mT moves all hyperfine transition frequencies to at least 3 times the cutoff frequency, ensuring reliable absolute beam polarimetry with the required 1% precision at the EIC.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
NASA NTRS1979

Geomagnetic Sq variation at satellite altitudes - Is Sq correction important in Magsat data analysis

By a spherical harmonic expansion of the magnetic potential the geomagnetic Sq variation is shown to have peak-to-peak amplitudes of a few tens of nanotesla at 400 km altitude. It is shown, in particular, that for harmonics of degree n up to about 4, with which Sq can be well represented, the vertical component of the magnetic field at altitudes to about 400 km is virtually the same as on the ground. Even though the NASA's Magnetic Field Satellite (Magsat), scheduled for launch in September 1979, is planned to be placed in a twilight sun-synchronous orbit, Sq over certain areas of the earth can be of comparable magnitude as magnetic anomalies of geological origin sought in the data. Due consideration should be given to Sq as well as to the effects from magnetospheric sources in analyzing the Magsat data. The Sq effect is expected to be large during the period of Magsat operation which is near the predicted solar maximum.

Sugiura, M.↗
DOE OSTI2022

Constraining low redshift [C II ] emission by cross-correlating FIRAS and BOSS data

ABSTRACT We perform a tomographic cross-correlation analysis of archival FIRAS data and the BOSS galaxy redshift survey to constrain the amplitude of [C II] 2P3/2 → 2P1/2 fine structure emission. Our analysis employs spherical harmonic tomography (SHT), which is based on the angular cross-power spectrum between FIRAS maps and BOSS galaxy over-densities at each pair of redshift bins, over a redshift range of 0.24 < z < 0.69. We develop the SHT approach for intensity mapping, where it has several advantages over existing power spectral estimators. Our analysis constrains the product of the [C II] bias and [C II] specific intensity, $b_{\rm [C \small{\rm II}]}I_{\rm [C \small{\rm II}]}$, to be <0.31 MJy/sr at z ≈ 0.35 and <0.28 MJy/sr at z ≈ 0.57 at $95{{\ \rm per\ cent}}$ confidence. These limits are consistent with most current models of the [C II] signal, as well as with higher-redshift [C II] cross-power spectrum measurements from the Planck satellite and BOSS quasars. We also show that our analysis, if applied to data from a more sensitive instrument such as the proposed PIXIE satellite, can detect pessimistic [C II] models at high significance.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2026

Low-cost calculation and analysis of 2D IR spectra of model diiron trinitrosyl complexes in the NO stretch region with vibrational perturbation theory

Two-dimensional infrared spectroscopy offers unique capabilities for probing vibrational coupling in complex metal–ligand systems. In this paper, we combine two-dimensional infrared spectroscopy with vibrational perturbation theory to investigate vibrational coupling in a diiron trinitrosyl complex across three stable redox states. Although these systems are challenging for electronic structure methods, we demonstrate that key features of experimental 2D IR spectra can be accurately reproduced using reduced-dimensional anharmonic calculations with a small harmonic frequency scaling. Analysis reveals that N–O stretching modes maintain high locality across all redox states, with coupling patterns that directly reflect variations in Fe–N bond strength. Using curvilinear coordinate analysis, we demonstrate these differences result from systematic changes in cubic anharmonic force constants rather than mode delocalization. Our results establish N–O stretches as sensitive probes of metal–ligand bonding strength, expanding the toolkit for studying biologically relevant nitrosyl complexes.

Moran, Hayden A. [Texas A&M University, College St↗
NASA NTRS1995

Simulation of 100-300 GHz solid-state harmonic sources

Accurate and efficient simulations of the large-signal time-dependent characteristics of second-harmonic Transferred Electron Oscillators (TEO's) and Heterostructure Barrier Varactor (HBV) frequency triplers have been obtained. This is accomplished by using a novel and efficient harmonic-balance circuit analysis technique which facilitates the integration of physics-based hydrodynamic device simulators. The integrated hydrodynamic device/harmonic-balance circuit simulators allow TEO and HBV circuits to be co-designed from both a device and a circuit point of view. Comparisons have been made with published experimental data for both TEO's and HBV's. For TEO's, excellent correlation has been obtained at 140 GHz and 188 GHz in second-harmonic operation. Excellent correlation has also been obtained for HBV frequency triplers operating near 200 GHz. For HBV's, both a lumped quasi-static equivalent circuit model and the hydrodynamic device simulator have been linked to the harmonic-balance circuit simulator. This comparison illustrates the importance of representing active devices with physics-based numerical device models rather than analytical device models.

NONLINEAR CIRCUITS↗
DOE OSTI2021

New Solids in As-O-Mo, As(P)-O-Mo(W) and As(P)-O-Nb(W) Systems That Exhibit Nonlinear Optical Properties

Interactions between well-mixed fine powders of As 2 O 3 , P 2 O 5 , MoO 3 , WO 3 and Nb 2 O 5 at different stoichiometry in quartz ampoules under vacuum at ~1000 °C in the presence of metallic molybdenum (or niobium), over several weeks, led to shiny dichroic crystalline materials being formed in cooler parts of the reaction vessel. An addition of small quantities of metals-Mo or Nb-was made with the aim of partially reducing their highly oxidized Mo(VI), W(VI) or Nb(V) species to corresponding Mo(V), W(V) and Nb(IV) centers, in order to form mixed valence solids. Sublimed crystals of four new compounds were investigated using a variety of techniques, with prime emphasis on the X-ray analysis, followed by spectroscopy (diffusion reflectance, IR, Raman and EPR), second harmonic generation (SHG), thermal analysis under N 2 and air atmosphere, and single crystals electrical conductivity studies. The results evidenced the formation of new complex solids of previously unknown compositions and structures. Three out of four compounds crystallized in non-centrosymmetric space groups and represent layered 2D polymeric puckered structures that being stacked on each other form 3D lattices. All new solids exhibit strong second-harmonic-generation (SHG effect; based on YAG 1064 nm tests with detection of 532 nm photons), and a rare photosalient effect when crystals physically move in the laser beam. Single crystals’ electrical conductivity of the four new synthesized compounds was measured, and the results showed their semiconductor behavior. Values of band gaps of these new solids were determined using diffusion reflectance spectroscopy in the visible region. Aspects of new solids’ practical usefulness are discussed.

59 BASIC BIOLOGICAL SCIENCES↗
NASA NTRS1985

Analysis of vibronic transitions in titanium doped sapphire using the temperature of the fluorescence spectra

An analysis of the fluorescence spectra of titanium-doped sapphire crystals for temperatures ranging from 13 to 578 K is made. Zero- and multiphoton assisted electronic transitions are observed at temperatures below 125 K. Zero-phonon transition energies agree with previously reported measured and predicted values. Photon-assisted transitions suggest that two principle modes of lattice vibrations with energies of 220 and 260/cm are coupled to the electronic 2T2g state. A single phonon energy of 173/cm is observed to couple to the 2Eg electronic state. Crossover energy is estimated to be about 11,800/cm using a simple harmonic approximation. Lineshape analysis is performed. The fluorescence lifetime as measured to be a constant 3.9 microsec below 150 k decreasing to 2.9 microsec at 300 K.

Byvik, C. E.↗
NASA NTRS1980

A low-order global gravity field of Venus and dynamical implications

An estimate of sixth-degree and sixth-order harmonic coefficients of the global gravity field of Venus is obtained by processing the long periodic variations of the mean orbital elements of the Pioneer Venus orbiter. Approximately 220 days of data are included in this reduction, which provides almost complete longitudinal coverage. Oblateness is estimated to be -5.97 + or - 3.2 x 10 to the -6. It is noted that the amplitudes of other coefficients are similar to the predicted coefficients using Kaula's rule under equal stress assumption. Atmospheric density values as a function of altitude are obtained to help model drag perturbation. A radial acceleration map at 100 km above the Venus surface is generated, and correlation between gravity anomalies and major topographic features is observed. Spectral analysis of the harmonic model suggests that the interior density anomalies are like those on earth. The orientation angles of the principal axes of the moments of inertia are computed, and deviation of the maximum moment of inertia axis from the spin axis is observed to be small (less than 5 deg). It is found that the minimum moment of inertia axis passes through the Aphrodite and Beta regions.

Ananda, M. P.↗
DOE OSTI2020

A Likely Magnetic Activity Cycle for the Exoplanet Host M Dwarf GJ 3512

Current radial velocity data from specialized instruments contain a large amount of information that may pass unnoticed if their analysis is not accurate. The joint use of Bayesian inference tools and frequency analysis has been shown as effective in revealing exoplanets but they have been used less frequently to investigate stellar activity. We intend to use radial velocity data of the exoplanet host star GJ 3512 to investigate its magnetic activity. Our study includes the analysis of the photometric data available. The main objectives of our work are to constrain the orbital parameters of the exoplanets in the system, to determine the current level of activity of the star and to derive an activity cycle length for it. An adaptive importance sampling method was used to determine the parameters of the exoplanets orbit. Generalized Lomb–Scargle periodograms were constructed with both radial velocity curve and photometric data. A careful analysis of the harmonic frequencies was conducted in each periodogram. Our fit to multiple Keplerian orbits constrained the orbital parameters of two giant gas planets orbiting the star GJ 3512. The host star showed an increase of its magnetic activity during the last observing campaign. The accurate fit of the radial velocity curve data to the multi-Keplerian orbit permitted to reveal the star rotation in the residuals of the best fit and estimate an activity cycle length of ~14 yr.

79 ASTRONOMY AND ASTROPHYSICS↗
NASA NTRS1978

Application of higher harmonic blade feathering for helicopter vibration reduction

Higher harmonic blade feathering for helicopter vibration reduction is considered. Recent wind tunnel tests confirmed the effectiveness of higher harmonic control in reducing articulated rotor vibratory hub loads. Several predictive analyses developed in support of the NASA program were shown to be capable of calculating single harmonic control inputs required to minimize a single 4P hub response. In addition, a multiple-input, multiple-output harmonic control predictive analysis was developed. All techniques developed thus far obtain a solution by extracting empirical transfer functions from sampled data. Algorithm data sampling and processing requirements are minimal to encourage adaptive control system application of such techniques in a flight environment.

Powers, R. W.↗
NASA NTRS1989

Noise produced by turbulent flow into a rotor: Theory manual for noise calculation

An analysis is presented for the calculation of noise produced by turbulent flow into a helicopter rotor. The method is based on the analysis of Amiet for the sound produced by an airfoil moving in rectilinear motion through a turbulent flow field. The rectilinear motion results are used in a quasi-steady manner to calculate the instantaneous spectrum of the rotor noise at any given rotor position; the overall spectrum is then found by averaging the instantaneous spectrum over all rotor azimuth angles. Account is taken of the fact that the rotor spends different amounts of retarded time at different rotor positions. Blade to blade correlation is included in the analysis, leading to harmonics of blade passing frequency. The spectrum of the turbulence entering the rotor is calculated by applying rapid distortion theory to an isotropic turbulence spectrum, assuming that the turbulence is stretched as it is pulled into the rotor. The inputs to the program are obtained from the atmospheric turbulence model and mean flow distortion calculation, described in another volume of this set of reports. The analytical basis is provided for a module which was incorporated in NASA's ROTONET helicopter noise prediction program.

Amiet, R. K.↗
NASA NTRS1990

Effects of higher harmonic control on rotor performance and control loads

An analytical study, based on an advanced Higher Harmonic Control (HHC) analysis for helicopter rotor systems, is carried out to investigate HHC application for rotor performance enhancement. The effects of HHC on stall characteristics of rotor and blade pitch-link loads when the system is configured to suppress vibration are also examined. For vibration control, simulated results indicate that HHC may promote early blade stall. Effects of blade torsion frequencies on HHC performance are moderate, and torsionally stiff blades require less actuator power than torsionally soft blades. For rotor performance improvement, a 3 to 5 percent reduction in rotor shaft power can be achieved with 2 deg of two-per-rev blade pitch control.

Nguyen, Khanh↗