Thermoplastic Forming of Bulk Metallic Glass Nozzles for High-Pressure, Low-Temperature Hydrogen Fueling
Explore the source record for details and available documents.
08 HYDROGEN↗
SEARCH · Engineering Papers
Results for “fuel nozzle”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
On the effect of mixing-driven vaporization in a homogeneous relaxation modeling framework
The homogeneous relaxation model (HRM) is one of the most widely used models to describe the liquid–gas phase transition in multiphase flows due to the occurrence of cavitation. However, in its original formulation, the HRM does not account for the presence of ambient gas species, which generally limits its applicability to the injector's internal flow where ambient gases are negligible. In this work, a mixing-driven vaporization (MDV) model was developed to extend the capability of the HRM in handling the mixing effect in the regions external to the nozzle, where vapor–liquid equilibrium for multi-species mixtures of fuel and ambient gas is considered. Herein, to assess the model performance, simulations of the Engine Combustion Network's Spray G injector were performed with the HRM and the MDV model under both flash-boiling and evaporating conditions. It was found that the MDV model led to a better match against x-ray measurements of fuel density in the near-nozzle region. In contrast to the HRM, the MDV model was able to reproduce the vaporization process in the mixing zone at the edge of the fuel jet, which aligns with the expected physics. This resulted in substantial differences in the prediction of other flow characteristics such as mixture temperature and pressure. Furthermore, this work demonstrates that evaporation timescales have a considerable effect on the MDV model's predictions, as shown by a parametric study in which a time factor was introduced to mimic the effect of different timescales due to different phase change mechanisms.
71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
Evaluation of fuel injection configurations to control carbon and soot formation in small GT combustors
An experimental program to investigate hardware configurations which attempt to minimize carbon formation and soot production without sacrificing performance in small gas turbine combustors has been conducted at the United Technologies Research Center. Four fuel injectors, embodying either airblast atomization, pressure atomization, or fuel vaporization techniques, were combined with nozzle air swirlers and injector sheaths, and evaluated at test conditions which included and extended beyond standard small gas turbine combustor operation. Extensive testing was accomplished with configurations embodying either a spill return or a T-vaporizer injector. Minimal carbon deposits were observed on the spill return nozzle for tests using either Jet A or ERBS test fuel. A more extensive film of soft carbon was observed on the vaporizer after operation at standard engine conditions, with large carbonaceous growths forming on the device during off-design operation at low combustor inlet temperature. Test results indicated that smoke emission levels depended on the combustor fluid mechanics (especially the mixing rates near the injector), the atomization quality of the injector and the fuel hydrogen content.
Rosfjord, T. J.↗
Langley facility for tests at Mach 7 of subscale, hydrogen-burning, airframe-integratable, scramjet models
Modifications to a 20-megawatt arc-heated facility for testing a hydrogen-burning, airframe-integratable, subscale, scramjet model are described. Arc-heated flow is mixed with unheated air to furnish a test flow duplicating Mach 7 flight. (Stagnation temperature is 2220 K.) Modifications to the commercially available heater to improve survivability and smoothness are described. Pitot profiles show uniform flow and a slightly thinner nozzle boundary layer than predicted. Comparison of the tunnel boundary layer, which will be ingested by the engine model, with the boundary layer that a flight engine might ingest from its vehicle forebody shows a difference in the density distribution through the boundary layer. Calculations of wall heating and transient wall temperatures of the engine model show that for a 30-sec burn, the heat sink model requires cooling at selected locations to avoid thermal-stress, cycle-life problems. Model performance predictions show that fuel equivalence ratio and nozzle exit area both have large effects on thrust. Average inlet entrance Mach number (as affected by boundary-layer ingestion) has little effect on thrust.
Boatright, W. B.↗
H2@Scale Program Multi-Party Cooperative Research and Development Agreement: California Hydrogen Infrastructure Research Consortium Task (Cooperative Research and Development Final Report, CRADA Number CRD-18-00754)
Many stakeholders are working on hydrogen and fuel cell products, markets, requirements, mandates, and policies. California has been leading the way for hydrogen infrastructure and fuel cell electric vehicle (FCEV) deployment. This leadership has advanced a hydrogen network that is not duplicated anywhere in the United States and is unique in the world for its focus on providing a retail fueling experience. In addition, the advancements have identified many lessons learned for hydrogen infrastructure development, deployment, and operation. Other interested states and countries are using California's experience as a model case, making success in California paramount to enabling market acceleration and uptake in the United States. The technical research capability of the national laboratories can be used to assist California in decisions and evaluations, as well as to verify solutions to problems impacting the industry. Because these challenges cannot be addressed by one agency or one laboratory, a hydrogen research consortium has been organized to combine and collaborate. The collaboration aims to ensure that data are available to evaluate projects and inform decision makers, independently verify and validate component solutions, provide experimental results for future hydrogen infrastructure, increase the availability of technical experts for quick-need issues for California hydrogen infrastructure development, deployment, operation, and technology advances. The proposed tasks include data collection from operational stations, component failure fix verification (i.e. nozzle freeze lock), new fueling methods for medium and heavy duty applications, and ensuring hydrogen quality is maintained. U.S. leadership for hydrogen technologies is rooted in California, a location for implementing many H2@Scale pathways such as reducing curtailment and stranded resources, reducing petroleum use and emissions, and developing and creating jobs.
08 HYDROGEN↗
Simulation of Non-Acoustic Combustion Instability in a Hybrid Rocket Motor
A transient model of a hybrid motor was formulated to study the cause and elimination of non-acoustic combustion instability. The transient model was used to simulate four key tests out of a series of seventeen hybrid motor tests conducted by Thiokol, Rocketdyne and Martin Marietta at NASA/Marshall Space Flight Center (NASA/MSFC). These tests were performed under the Hybrid Propulsion Technology for Launch Vehicle Boosters (HPTLVB) program. The first test resulted in stable combustion. The second test resulted in large-amplitude, 6.5 Hz chamber pressure oscillations that gradually damped away by the end of the test. The third test resulted in large-amplitude, 7.5 Hz chamber pressure oscillations that were sustained throughout the test. The seventh test resulted in the elimination of combustion instability with the installation of an orifice immediately upstream of the injector. The formulation and implementation of the model are the scope of this presentation. The current model is an independent continuation of modeling presented previously by joint Thiokol-Rocketdyne collaborators Boardman, Hawkins, Wassom, and Claflin. The previous model simulated an unstable IR&D hybrid motor test performed by Thiokol. There was very good agreement between the model and the test data. Like the previous model, the current model was developed using Matrix-x simulation software. However, the tests performed at NASA/MSFC under the HPTLVB program were actually simulated. In the current model, the hybrid motor consisting of the liquid oxygen (LOX) injector, the multi-port solid fuel grain and the nozzle was simulated. Also, simulated in the model was the LOX feed system consisting of the tank, venturi, valve and feed lines. All components of the hybrid motor and LOX feed system are treated by a lumped-parameter approach. Agreement between the results of the transient model and the actual test data was very good. This agreement between simulated and actual test data indicated that the combustion instability in the hybrid motor was due to two causes. The first cause was a LOX feed system of insufficient stiffness. The second cause was a LOX injector with an impedance or pressure drop that was too low to provide damping against the feed system oscillations. Also, it was discovered that testing with a new grain of solid fuel sustained the combustion instability. However, testing with a used grain of solid fuel caused the combustion instability to gradually decay.
Rocker, Marvin↗
Simulation of Non-Acoustic Combustion Instability in a Hybrid Rocket Motor
A transient model of a hybrid motor was formulated to study the cause and elimination of non-acoustic combustion instability. The transient model was used to simulate four key tests out of a series of seventeen hybrid motor tests conducted by Thiokol, Rocketdyne and Martin Marietta at NASA/Marshall Space Flight Center (NASAIMSFC). These tests were performed under the Hybrid Propulsion Technology for Launch Vehicle Boosters (HPTLVB) program. The first test resulted in stable combustion. The second test resulted in large-amplitude, 6.5 Hz chamber pressure oscillations that gradually damped away by the end of the test. The third test resulted in large-amplitude, 7.5 Hz chamber pressure oscillations that were sustained throughout the test. The seventh test resulted in the elimination of combustion instability with the installation of an orifice immediately upstream of the injector. The formulation and implementation of the model are the scope of this presentation. The current model is an independent continuation of modeling presented previously by joint Thiokol-Rocketdyne collaborators Boardman, Hawkins, Wassom, and Claflin. The previous model simulated an unstable IR&D hybrid motor test performed by Thiokol. There was very good agreement between the model and the test data. Like the previous model, the current model was developed using Matrix-x simulation software. However, the tests performed at NASA/MSFC under the HPTLVB program were actually simulated. In the current model, the hybrid motor consisting of the liquid oxygen (LOX) injector, the multi-port solid fuel grain and the nozzle was simulated. Also, simulated in the model was the LOX feed system consisting of the tank, venturi, valve and feed lines. All components of the hybrid motor and LOX feed system are treated by a lumped-parameter approach. Agreement between the results of the transient model and the actual test data was very good. This agreement between simulated and actual test data indicated that the combustion instability in the hybrid motor was due to two causes. The first cause was a LOX feed system of insufficient stiffness. The second cause was a LOX injector with an impedance or pressure drop that was too low to provide damping against the feed system oscillations. Also, it was discovered that testing with a new grain of solid fuel sustained the combustion instability. However, testing with a used grain of solid fuel caused the combustion instability to gradually decay.
Rocker, Marvin↗
System for multiple burns from a rocket motor
A system for multiple burns from a solid fuel rocket motor may extinguish rocket fuel after the rocket has been ignited. The motor may be extinguished via rapid decompression of the combustion chamber. The fuel may then be reignited by a suitable igniter, and the process of extinguishing and reigniting may be repeated, enabling multi-burn maneuvers. A decompressive extinguishing plug nozzle may extinguish solid rocket fuel after the rocket has been ignited and/or keep a rocket in a disarmed (zero thrust) state until the rocket is to be armed. The nozzle may include a plug that mostly impedes the opening of the nozzle and an outer cowl that is movable to rapidly decompress the combustion chamber. This rapid decompression extinguishes the solid rocket fuel. In some aspects, the fuel can be reignited and extinguished multiple times.
Dallmann, Nicholas↗
Experimental Investigation of Fuel Staging Effect on Modal Dynamics of Thermoacoustic Azimuthal Instabilities in a Multi-Nozzle Can Combustor
Abstract This paper analyzes the dynamics of unstable azimuthal thermoacoustic modes in a lean premixed combustor. Azimuthal modes can be decomposed into two counter rotating waves where they can either compete and potentially suppress one of them (spinning) or coexist (standing), depending on the operating conditions. This paper describes experimental results of the dynamical behaviors of these two waves. The experimental data were taken at different mass flow rates as well as different azimuthal fuel staging in a multi-nozzle can combustor. It is shown that at a low flow rate with uniform fuel distribution, the two waves have similar amplitudes, giving rise to a standing wave. However, the two amplitudes are slowly oscillating out of phase to each other, and the phase difference between the two waves also shows oscillatory behavior. For an intermediate flow rate, the dynamics show intermittency between standing and spinning waves, indicating that the system is bistable. In addition, the phase difference dramatically shifts when the mode switches between standing and spinning waves. For a high flow rate, the system stabilizes at a spinning wave most of the time. These experimental observations demonstrate that not only the amplitudes of two waves but also the phase difference plays an important role in the dynamics of azimuthal mode. For non-uniform azimuthal fuel staging, the modal dynamics exhibit only an oscillatory standing wave behavior regardless of the mass flow rate. Compared to the uniform fuel staging, however, the pressure magnitude is considerably reduced, which provides a potential strategy to mitigate and/or suppress the instabilities.
Kim, J.↗
Enhanced energy conversion efficiency promoted by cavitation in gasoline direct injection
High-pressure direct fuel injection plays the most crucial role in energy conversion and improving engine combustion efficiency and emission. The optimization of turbulent and multiphase fuel injection has focused on controlling hydrodynamic parameters such as injection pressure. While the thermodynamic influence is often considered in the flash boiling situation, we inquire into how gasoline-type fuel’s hydro- and thermodynamic properties impact the injection dynamics by fuel-temperature induced cavitation. The turbulent and cavitating flows emanating from the direct-injection nozzle is visualized by ultrafast x-ray imaging with an unprecedented spatiotemporal resolution. The ultrafast liquid-fuel dynamics are dominated by injection pressure as well as fuel temperature through cavitation, an important thermodynamic parameter but often difficult to control in engine combustion. With the most direct and quantitative measurement, we discovered that the near-nozzle fuel-jet dynamics can be perfectly scaled by a single dimensionless parameter, cavitation number, particularly sensitive to the fuel temperature, in a wide operation range. This universal scaling shows that cavitation can be harnessed to elevate the pneumatic-hydraulic to kinetic energy conversion efficiency, critical for promoting fuel atomization and engine combustion performance. This enhancement effect will have even more impact on engine combustion using alternative low-emission fuels with higher saturated vapor pressure.
30 DIRECT ENERGY CONVERSION↗
EFFECTS OF EXHAUST NOZZLE RECOMBINATION ON HYPERSONIC RAMJET PERFORMANCE. II - ANALYTICAL INVESTIGATION
Exhaust nozzle recombination for hydrogen-fueled subsonic combustion ramjet engines
EXHAUST NOZZLE↗
Advanced Methods for Aircraft Engine Thrust and Noise Benefits: Nozzle-Inlet Flow Analysis
The research is focused on a wide regime of problems in the propulsion field as well as in experimental testing and theoretical and numerical simulation analyses for advanced aircraft and rocket engines. Results obtained are based on analytical methods, numerical simulations and experimental tests at the NASA LaRC and Hampton University computer complexes and experimental facilities. The main objective of this research is injection, mixing and combustion enhancement in propulsion systems. The sub-projects in the reporting period are: (A) Aero-performance and acoustics of Telescope-shaped designs. The work included a pylon set application for SCRAMJET. (B) An analysis of sharp-edged nozzle exit designs for effective fuel injection into the flow stream in air-breathing engines: triangular-round and diamond-round nozzles. (C) Measurement technique improvements for the HU Low Speed Wind Tunnel (HU LSWT) including an automatic data acquisition system and a two component (drag-lift) balance system. In addition, a course in the field of aerodynamics was developed for the teaching and training of HU students.
Morgan, Morris H.↗
Advanced Methods for Aircraft Engine Thrust and Noise Benefits: Nozzle-Inlet Flow Analysis
The Fluid Mechanics and Acoustics Laboratory at Hampton University (HU/FM&AL) jointly with the NASA Glenn Research Center has conducted four connected subprojects under the reporting project. Basically, the HU/FM&AL Team has been involved in joint research with the purpose of theoretical explanation of experimental facts and creation of accurate numerical simulation techniques and prediction theory for solution of current problems in propulsion systems of interest to the NAVY and NASA agencies. This work is also supported by joint research between the NASA GRC and the Institute of Mechanics at Moscow State University (IM/MSU) in Russia under a CRDF grant. The research is focused on a wide regime of problems in the propulsion field as well as in experimental testing and theoretical and numerical simulation analyses for advanced aircraft and rocket engines. The FM&AL Team uses analytical methods, numerical simulations and possible experimental tests at the Hampton University campus. The fundamental idea uniting these subprojects is to use nontraditional 3D corrugated and composite nozzle and inlet designs and additional methods for exhaust jet noise reduction without essential thrust loss and even with thrust augmentation. These subprojects are: (1) Aeroperformance and acoustics of Bluebell-shaped and Telescope-shaped designs; (2) An analysis of sharp-edged nozzle exit designs for effective fuel injection into the flow stream in air-breathing engines: triangular-round, diamond-round and other nozzles; (3) Measurement technique improvement for the HU Low Speed Wind Tunnel; a new course in the field of aerodynamics, teaching and training of HU students; experimental tests of Mobius-shaped screws: research and training; (4) Supersonic inlet shape optimization. The main outcomes during this reporting period are: (l) Publications: The AIAA Paper #00-3170 was presented at the 36th AIAA/ASME/SAE/ASEE Joint Propulsion Conference, 17-19 June, 2000, Huntsville, AL. The AIAA Paper #01-1893 has been accepted for the AIAA/NAL-NASDA-ISAS 10th International Space Planes and Hypersonic Systems and Technologies Conference, 24-27 April 2001, Kyoto, Japan. The AIAA Paper #01 -3204 has been accepted for presentation at the 37th AIAA/ASME/SAE/ASEE Joint Propulsion Conference, being held on 08-11 July, in Salt Lake City, UT; (2) A U.S. patent #6,082,635 was granted on July 4, 2000; (3) Grants and proposals: The H U/ FM&AL was awarded the NASA grant NAG-3-2495 in October 2000 and the laboratory is a primary U.S. research team in a joint project under the CRDF award granted to the NASA GRC and IM/MSU (Russia) in July 2000; (4) Theory and numerical simulations: Analytical theory, numerical simulation, comparison of theoretical with experimental results, and modification of theoretical approaches, models, grids, etc., have been conducted for several complicated 2D and 3D nozzle and inlet designs using NASA, ICASE, and IM/MSU codes based on full Euler and Navier-Stokes solvers: CFL3D, FLUENT, and GODUNOV, and others; (5) Experimental Tests: (a) A new course: "Advanced Aerodynamics and Aircraft Performance" presented in spring semester, 2001; training and experimental test research using the HU LSWT. (b) Small-scale M6bius-shaped screws were tested in different conditions and their application has shown essential benefits by comparison with traditional designs; (6) Installation in the FM&AL computer system: second software TECPLOT 8.0 for the UNIX SGI workstation and free TECPLOT 7.5 for the PC Dell computer, and 2D and 3D GRIDGEN (version 9) for the UNIX SGI as well as installation of two free NASA codes, 3D MAG and VULCAN; (7) Student Research Activity: Involvement of two undergraduate students as research assistants in the current research project.
Gilinsky, Mikhail↗
Quantification of Variation in Combustion Instability Amplitude in a Multi-Nozzle Can Combustor
In this work, we quantify the level of variation in unstable combustion oscillation amplitudes and identify the source of this variation in a multi-nozzle can combustor. At conditions where pollutant emissions are reduced, lean-premixed combustors can undergo thermoacoustic instability when pressure and heat release rate oscillations couple. A commonly used method for suppressing instability is fuel staging, which is a method where fuel is unevenly distributed between nozzles in a multi-nozzle combustor. Our work follows others who have characterized the effect of fuel staging on combustion instability and the mechanisms by which it works during both steady-state and transient operation. One of the outcomes from our previous work was that certain instability operating points display a high level of pressure oscillation amplitude variation. Instead of oscillating at a constant limit-cycle amplitude, the pressure oscillation amplitude varies significantly in time. In this work, we use the concept of permutation entropy to quantify the level of variation in the pressure fluctuation amplitude. We correlate the level of variation with a number of state variables over a range of operating conditions, 291 test cases in all. These state variables include mixture equivalence ratio; transient timescale, amplitude, and direction; hardware temperatures; gas temperatures; and thermoacoustic damping and growth rates. Significant pressure oscillation amplitude variation occurs when the thermoacoustic damping rate is low. The damping and growth rates can be low for a number of reasons, but they are highly correlated with the metal temperature of the centerbody, where the flames are anchored; lower temperatures result in lower damping rates during stable operation and lower growth rates during unstable operation. These results show the importance of the thermal boundary condition on the time-dependent behavior of the thermoacoustic instability.
Westfall, Seth↗
Heat transfer in rocket nozzles using high temperature hydrogen propellant with real property variations.
Coupled radiative and convective heat fluxes in high temperature hydrogen propellant rocket nozzles with shape and temperature variations
ROCKET NOZZLE↗
Effect of interjet spacing on mixing of multiple coaxial jets in supersonic flow
An experimental and analytical investigation of strut-mounted, four-nozzle, downstream facing, gaseous fuel injector assembly was conducted in a Mach 4 air-stream with P = 154 psia and T sub o 520 R. Helium was used as the injectant, and the interjet spacing (S/D) was the main parameter varied. The principal data are in the form of Helium concentration profiles at seven axial stations, Mach number distributions at three axial stations and schlieren photographs of the flow field at different interjet spacings. An approximate analysis was developed based upon a linearization in the Von Mises plane, Crocco integrals for the temperature and concentrations fields and an eddy viscosity model. Good agreement with the data was achieved. It was found that, at these conditions, interjet spacing has an effect on mixing only up to S/D of approximately 2.5, with concentration of injectant becoming smaller as S/D is increased, and the Mach number downstream of the injector tends to decrease with decreasing S/D.
Lorber, A. K.↗
Low thrust monopropellant engine
The engine has a conventional body and nozzle configuration. The monopropellant fuel is fed into the thruster with dual injection tubes via an injector shell with dual spray jets. The spray jets are positioned generally opposed to each other. A heater screen pack combination thermally decomposes the fuel after injection into the combustion chamber of the thruster.
Kuenzly, J. D.↗
Two-dimensional kinetics computer program for orbit transfer vehicles
Future Orbit Transfer Vehicles (OTV) presently under consideration require rocket engines delivering a high specific impulse. This high performance can be obtained with large area ratio thrust chambers using oxygen with either hydrogen or hydrocarbon fuels. In the projected nozzles, the combustion products are expanded to low pressure and temperature levels at high Mach number, a domain which has not been experienced with existing rocket engines. In order to assist in the design and evaluation of OTV engines, modifications have recently been incorporated in the Two-Dimensional-Kinetics (TDK) computer program. These modifications include the treatment of shock waves induced by the wall curvature, and shocks which are attached to the wall. The reflection of a shock wave at the flow axis is also treated in an appropriate manner and multiple shock reflections are allowed. A Boundary Layer Module (BLM) has also been incorporated into the TDK computer program in order to provide an automated treatment of the rigorous JANNAF rocket engine performance prediction procedure.
Nickerson, G. R.↗