Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “fuel combustion”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 271 records · Page 15
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

Active and Stable PtPd Diesel Oxidation Catalysts under Industry‐Defined Test Protocols

Nanoparticle-supported Pt and Pd catalysts are employed industrially to convert CO and hydrocarbon residue from incomplete diesel fuel combustion into more environmentally-benign products. However, these catalysts deactivate over time due to sintering, especially for Pt nanoparticles which readily generate volatile species under high operating temperatures. Here, we turned the detrimental vapor-mediated sintering of Pt into an advantage by using a physical mixture of Pt and Pd catalysts prepared using a raspberry-colloid-templating (RCT) method. The RCT method produced Pt/Al 2 O 3 and Pd/Al 2 O 3 catalysts with partially embedded NPs to inhibit surface-mediated sintering pathways. As validated using an industry-defined emission control test protocol, aging a physical mixture of Pt/Al 2 O 3 and Pd/Al 2 O 3 at high temperature produced an alloyed PtPd/Al 2 O 3 catalyst that outperformed the fresh catalyst mixture and both individual catalysts for hydrocarbon conversion, while exhibiting high catalytic stability and resistance to sintering and to SO 2 poisoning. X-ray photoelectron spectroscopy revealed that in the aged catalyst mixture, half of the Pd content existed in the more active metallic state, compared to the less active oxide forms in the fresh mixture and both individual catalysts, explaining the unusual activity enhancement. Our results represent a practical approach to producing active and stable PtPd/Al 2 O 3 diesel oxidation catalysts for emission control applications.

Lim, Kang Rui Garrick [Harvard University, Cambrid↗
DOE OSTI2020

ToF-SIMS Analysis of Chemical Composition of Atmospheric Aerosols in Beijing

Atmospheric aerosols collected from each season in urban Beijing have been studied using time-of-flight secondary ion mass spectrometry (ToF-SIMS). The chemical composition of atmospheric aerosol particles during various atmospheric pollution levels were analyzed and distinguished by principal component analysis (PCA). The differences and sources of the components of the aerosol particles were explored. The results showed that the fine particulate matter from heavily polluted days mainly consists of inorganic salts and organic compounds, such as hydrocarbons, nitrogen- or sulfur-containing hydrocarbons, and their oxides. Samples collected from clean days in the four seasons were also analyzed. Only the samples collected in spring showed a significant difference from the other three seasons. We concluded that the main source of pollution in the Beijing urban area was fossil fuel combustion from motor vehicles.

ToF-SIMS, principal component analysis↗
DOE OSTI2022

Computational Methodology to Simulate Pyrometallurgical Processes in a Secondary Lead Furnace

Pyrometallurgical recovery of nonferrous metals involves a combination of thermally intensive transformations during exothermic gas-phase reactions, endothermic decomposition of solid charge, and melting of simpler solids. In the recovery of secondary lead, simultaneous thermal effects in a reverberatory-style furnace cause a melt pool to accumulate at the bottom, with lighter solids (slag) floating above and gaseous products from decomposition of the charge diffusing through the gas–slag interface. Species from oxy-fuel combustion of natural gas, species profiles from smelting reactions, and the formation of a melt pool consisting primarily of lead are simulated via a time-averaged formulation. Predictions of outflow are compared with preset inflow profiles to ensure conservation of mass. Thermal profiles for solid, liquid, and gas phases are presented by species. A novel method is implemented to model the latent heat of fusion using a heterogeneous chemical reaction. The simulation is conducted in Simcenter STAR-CCM+ v. 16.02.009-R8.

Rao, Vivek↗
DOE OSTI2022

Electrification of industrial boilers in the USA: potentials, challenges, and policy implications

Decarbonization of the industrial heat demand through electrification could contribute significantly to climate change mitigation efforts. In the US industry, thermal processes accounted for 75% of the total final energy demand in 2018, of which 17% is consumed by conventional industrial boilers (excluding cogeneration) for steam generation. Electric boilers have a small share in the US industrial steam generation due to several techno-economic reasons. Here, this study employs a bottom-up approach to investigate the sector-level and state-level techno-enviro-economic potentials of deploying electric boilers in the US industry in different timeframes. The results show that the technical potential energy and CO 2 savings by electrifying industrial boilers are 595 PJ and 200 MtCO 2 per year in 2050, respectively; however, these incur additional costs in each sector. Although there may be individual cost-effective opportunities for electrifying boilers in specific industrial sites, the overall costs are high in all industrial sectors and states due to the large disparity between electricity and combustion fuel prices. To overcome the highlighted techno-economic barriers, a comprehensive action plan for different stakeholders is also formulated. This study provides novel insights that should inform policymakers’ and executives’ decisions about the electrification of the current and future US industrial boiler systems.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗
DOE OSTI2022

Vapor–liquid equilibrium estimation of n-alkane/nitrogen mixtures using neural networks

Understanding fluid phase behavior, like VLE, in high P&T conditions is crucial for developing high-fidelity simulations of chemically reacting flows in liquid-fueled combustion systems and also forms an integral part of the design-modeling of the control processes in chemical industries. Two data-driven models have been proposed here in this study, each of which was competent in estimating VLE for the Type III binary systems of C 10 /N 2 and C 12 /N 2 , at pressures ranging up to 50–60 MPa. Both models showed better performance in predicting equilibrium pressure as compared to VLE modeled using PR-EOS. A modified model has also been proposed, capable of estimating the full phase envelope for the binary systems of C 10 /N 2 and C 12 /N 2 across a wide range of temperatures, and thus exhibit the mixture critical pressure at the concerned temperature. The diverse applicability of the proposed network architecture was further exhibited while estimating the VLE of a ternary system of C 1 /C 10 /N 2 .

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2026

Theoretical and kinetic modeling study of hydrazine oxidation

The present work constitutes the first theoretical and kinetic modeling study of hydrazine oxidation, which may be important for burnout in ammonia-fueled combustion. The kinetics of the oxidation of N 2 H 4 , N 2 H 3 and tHNNH by molecular oxygen were investigated via a quantum chemistry/canonical transition state theory approach. Geometries and anharmonic frequencies were obtained with density functional theory, and energies from coupled cluster calculations (CCSD(T)) extrapolated to the infinite basis set limit, with corrections for core-valence electron correlation, scalar relativistic effects, and higher level correlation up to lambda coupled cluster, CCSDT(Q) Λ . The key reactions occurred on the N 2 H 4 O 2 potential energy surface, where the results indicated a fast reaction of N 2 H 3 with HO 2 via singlet adducts to yield tHNNH + H 2 O 2 and HNN(H)O + H 2 O, while reaction on the triplet surface proceeds via a bound complex followed by a tight, submerged barrier to yield N 2 H 4 + O 2 . The results were incorporated in a detailed reaction mechanism, which was used to interpret the shock tube results from Michel and Wagner (1965) on the effect of O 2 on hydrazine conversion at 1100–1400 K. The kinetic model captured qualitatively the observed behavior, but underestimated the reaction rate under oxidizing conditions. The hydrazine pyrolysis chemistry dominated conversion at reducing conditions and/or high temperature. At oxidizing conditions and intermediate temperatures (≲ 1400 K), reactions of N 2 -amines with HO 2 and O 2 were important for the oxidation rate.

Ab initio calculations↗
DOE OSTI2025

A fully light-driven approach to separate carbon dioxide from emission streams

Carbon capture from industrial point sources is an essential component of the global effort to mitigate climate risks. However, traditional approaches require significant energy input—often provided, counterproductively, by fossil fuel combustion. Using sunlight directly as the energy source would significantly improve the energy efficiency of carbon capture processes. Herein, we report the first fully visible-light-driven CO 2 separation system, in which carbon capture is achieved via the photoenolization/addition reaction of inexpensive 2-methylbenzophenone with CO 2 , and CO 2 release is realized through an intramolecular photodecarboxylation reaction. Finally, this system operates isothermally, works with natural sunlight, and facilitates CO 2 removal from natural gas flue emissions, providing a blueprint for other non-thermal chemical separations.

Ahmad, Bayu I. Z. [Cornell Univ., Ithaca, NY (Unit↗
DOE OSTI2022

Conversion of food waste to renewable energy: A techno-economic and environmental assessment

Increasing quantities of food waste have become a concern due to high disposal costs in landfills and high greenhouse gas emissions. With this increase in food waste generation, there is also an increasing demand for renewable natural gas to supplement traditional fossil fuel combustion and offset the impacts of climate change. Collecting food waste from landfills and turning it into renewable natural gas using anaerobic digestion could be a win-win option for both food waste disposal and renewable energy production. While some literature exists on the energy potential, economic feasibility, and environmental benefit of food waste disposal via anaerobic digestion, no existing study simultaneously evaluates the energy, economic and environmental effect of food waste to renewable energy via anaerobic digestion, especially on a plant and city scale. Further, this study is focused on the techno-economic and environmental assessment of food waste to energy via anaerobic digestion in order to fill this gap. Four anaerobic digestion pathways are considered in this study: flare, pipeline natural gas, combined heat and power, and combined cycle for efficient power generation. Using a city of 1M people the results show that renewable natural gas from food waste could supply the natural gas usage for 1.9% of residential use, 2.7% of commercial use, 1.1% of industrial use, 167.5% of the compressed natural gas vehicle fleet, 0.7% of electric power generation, or 2.5% of industrial high-temperature heating processes. All pathways except pipeline natural gas will have a positive net present value in the baseline scenario, and the pipeline natural gas pathway will become economically viable with a net present value of 31 USD/t of food waste with renewable energy credits. Lastly, all of the pathways achieve negative greenhouse gas emissions, which indicates that anaerobic digestion is a more environmentally friendly method for the handling of food waste than landfills.

03 NATURAL GAS↗
DOE OSTI2023

A comprehensive review on regeneration strategies for direct air capture

Direct air capture (DAC), which removes CO 2 directly from ambient air, is a critical negative emission technology for mitigating global climate change. Efficiency and the source of energy are crucial considerations for DAC to enable negative emissions. Substantial technological progress has been made in DAC technologies, and promising opportunities exist for commercial-scale deployments. However, DAC technologies require high regeneration energy to release CO 2 from sorbents. Various approaches have been tested and optimized for different DAC systems. This review demonstrates that the work equivalent regeneration energy demand (supported by either the electric grid or fossil fuel combustion) ranges from 0.5–18.75 GJ/t-CO 2 for solid sorbent DAC systems and 0.62–17.28 GJ/t-CO 2 for liquid solvent DAC systems. The regeneration process is the energy-demanding process in DAC that is a key step for efficient operation. Potential methods to lower the regeneration energy demand include microwave, ultrasound, magnetic particle heating, and electric swing. Although the potential methods to date are still at the lab scale, significant work is being done to optimize DAC system processes.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2024

Heat pumps for all? Distributions of the costs and benefits of residential air-source heat pumps in the United States

Electrification of fossil-fuel combustion in buildings is a key component of achieving global greenhouse gas emissions targets. We use physics simulations of 550,000 statistically representative households to analyze distributions of the costs and benefits of three air-to-air heat pump performance levels, with and without insulation upgrades, across the diversity of the US housing stock. We find positive greenhouse gas reductions in every US state for all performance levels across five 2022-2038 electric grid scenarios, with full adoption reducing national emissions by 5%-9%. We find that air-to-air heat pumps could be cost effective without subsidies in 59% of households (65 million). However, efficiency is key: whereas minimum-efficiency equipment could increase energy bills in 39% of households, this fraction is only 19% when also upgrading insulation or 5% when using higher-efficiency equipment, though both strategies have higher upfront costs. Such affordability challenges could be addressed through supportive incentives, policy, and innovation.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗
DOE OSTI2024

An improved semi-global intrinsic kinetics model for high temperature carbon oxidation

Measurements of the oxidation rates of various forms of carbon (soot, graphite, coal char) have often shown an unexplained attenuation with increasing temperatures in the vicinity of 2000 K, even when accounting for diffusional transport limitations and gas-phase chemical effects (e.g. CO 2 dissociation). With the development of oxy-fuel combustion approaches for pulverized coal utilization with carbon capture, high particle temperatures are readily achieved in sufficiently oxygen-enriched environments. Here, in this work, a new semi-global intrinsic kinetics model for high temperature carbon oxidation is created by starting with a previously developed 5-step mechanism that was shown to reproduce all major known trends in carbon oxidation, except for its high temperature kinetic falloff, and incorporating a recently discovered surface oxide decomposition step. The predictions of this new model are benchmarked by deploying the kinetic model in a steady-state reacting particle code (SKIPPY) and comparing the simulated results against a carefully measured set of pulverized coal char combustion temperature measurements over a wide range of oxygen concentrations in N 2 and CO 2 environments. The results show that the inclusion of the spontaneous surface oxide decomposition reaction step significantly improves predictions at high particle temperatures. Furthermore, the simulations reveal that O atoms released from the oxide decomposition step enhance the radical pool in the near-surface region and within the particle interior itself. Incorporation of literature rates for O and OH reactions with the carbon surface results in a reduction in the predicted radical pool concentrations and a very minor enhancement of the overall carbon oxidation rate.

33 ADVANCED PROPULSION SYSTEMS↗
DOE OSTI2022

Pathways of clean energy heating electrification programs for reducing carbon emissions in Northwest China

We report clean energy heating electrification programs provide a promising way to reduce carbon emissions from fossil fuel combustion and consumption. This work studies the cost competitiveness of clean energy heating technologies under three dynamic mechanisms: investment costs, subsidy policies, and operating costs with real data. It provides key insights into the cost competitiveness of the different heating technologies deployed in different areas, as well as their sensitivity to the three dynamic mechanisms. The results show that currently, the distinct heating programs are more cost-efficient in the urban area with existing heating networks. The average payback period of all district clean energy heating programs in the urban area is 14.9 years, while that of the individual clean heating programs is 24.7 years. The individual heating programs are becoming increasingly cost-competitive with the incentive mechanisms, especially the electricity pricing mechanisms. Moreover, individual heating technologies present remarkable advantages on flexibility and sustainability in the long run. According to the technology diffusion model proposed in this paper, the individual clean heating programs will occupy more than 50% of the market share in 2050 under the comprehensive effect of CAPEX, government subsidies, and OPEX. The real-world results and analysis render references to shape the pathway of clean energy heating electrification in Northwest China and other regions with a similar situation.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗
DOE OSTI2023

Near Quantitative Removal of Selenate and Sulfate Anions from Wastewaters by Cocrystallization with Chelating Hydrogen-Bonding Guanidinium Ligands

Selenium (Se) has become an environmental contaminant of aquatic ecosystems as a result of human activities, particularly mining, fossil fuel combustion, and agricultural activities. By leveraging the high sulfate concentrations relative to Se oxyanions (i.e., SeO n 2– , n = 3, 4) present in some wastewaters, we have developed an efficient approach to Se-oxyanion removal by cocrystallization with bisiminoguanidinium (BIG) ligands that form crystalline sulfate/selenate solid solutions. The crystallization of the sulfate, selenate and selenite, oxyanions and of sulfate/selenate mixtures with five candidate BIG ligands are reported along with the thermodynamics of crystallization and aqueous solubilities. Oxyanion removal experiments with the top two performing candidate ligands show a near quantitative removal (>99%) of sulfate or selenate from solution. When both sulfate and selenate are present, there is near quantitative removal (>99%) of selenate, down to sub-ppb Se levels, with no discrimination between the two oxyanions during cocrystallization. Reducing the selenate concentrations by 3 orders of magnitude or more relative to sulfate, as found in many wastewaters, led to no measurable loss in Se removal efficiencies. This work offers a simple and effective alternative to selective separation of trace amounts of highly toxic selenate oxyanions from wastewaters, to meet stringent regulatory discharge limits.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Air pollution control strategies directly limiting national health damages in the US

Exposure to fine particulate matter (PM 2.5 ) from fuel combustion significantly contributes to global and US mortality. Traditional air pollution control strategies typically focus on emission reductions for specific air pollutants or sectors to maintain air pollutant concentrations within acceptable levels. Here we directly set national PM 2.5 mortality cost reduction targets within a global human-earth system model with US state-level energy systems, identifying endogenously the control actions, sectors, and locations that most cost-effectively reduce PM 2.5 mortality. Our results show that substantial health benefits can be cost-effectively achieved by using electricity to replace sources with high primary PM 2.5 emission intensities, including industrial coal, building biomass, and industrial liquids. Increasing the stringency of PM 2.5 reduction targets expedites the phaseout of high emission intensity sources, leading to larger declines in major air pollutant emissions, but very limited co-benefits in reducing CO 2 emissions. Control strategies achieve the greatest mortality cost reductions in the East North Central and Middle Atlantic states.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2021

Source sector and fuel contributions to ambient PM 2.5 and attributable mortality across multiple spatial scales

Ambient fine particulate matter (PM 2.5 ) is the world’s leading environmental health risk factor. Reducing the PM 2.5 disease burden requires specific strategies that target dominant sources across multiple spatial scales. We provide a contemporary and comprehensive evaluation of sector- and fuel-specific contributions to this disease burden across 21 regions, 204 countries, and 200 sub-national areas by integrating 24 global atmospheric chemistry-transport model sensitivity simulations, high-resolution satellite-derived PM 2.5 exposure estimates, and disease-specific concentration response relationships. Globally, 1.05 (95% Confidence Interval: 0.74–1.36) million deaths were avoidable in 2017 by eliminating fossil-fuel combustion (27.3% of the total PM 2.5 burden), with coal contributing to over half. Other dominant global sources included residential (0.74 [0.52–0.95] million deaths; 19.2%), industrial (0.45 [0.32–0.58] million deaths; 11.7%), and energy (0.39 [0.28–0.51] million deaths; 10.2%) sectors. Our results show that regions with large anthropogenic contributions generally had the highest attributable deaths, suggesting substantial health benefits from replacing traditional energy sources.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2025

Climate, air quality, and equity benefits from hydrogen substitution for fossil fuels used in process heat

Fossil fuel combustion for process heat in heavy industry accounts for ~15% of all United States CO 2 emissions and emits PM 2.5 and its precursors, emissions that have a disproportionate impact on minority populations. Decarbonizing process heat in the U.S. via hydrogen substitution presents an opportunity to reduce emissions of CO 2 and PM 2.5 and mitigate resulting exposure disparity. Here, we show that hydrogen substitution in steelmaking provides a large reduction in CO 2 emissions and air quality-related premature mortality, while hydrogen substitution in petroleum refining substantially benefits disadvantaged communities. When reductions in CO 2 emissions and premature mortality are monetized using standard regulatory values, we find that the sum of air pollution and climate benefits outweighs the difference in private cost associated with hydrogen substitution in steelmaking, regardless of the method of hydrogen production. The approach developed here can support evaluations of equity-focused decarbonization strategies in other industries and for specific sites.

08 HYDROGEN↗
DOE OSTI2024

Microphysical properties of atmospheric soot and organic particles: measurements, modeling, and impacts

Atmospheric soot and organic particles from fossil fuel combustion and biomass burning modify Earth’s climate through their interactions with solar radiation and through modifications of cloud properties by acting as cloud condensation nuclei and ice nucleating particles. Recent advancements in understanding their individual properties and microscopic composition have led to heightened interest in their microphysical properties. This review article provides an overview of current advanced microscopic measurements and offers insights into future avenues for studying microphysical properties of these particles. To quantify soot morphology and ageing, fractal dimension ( D f ) is a commonly employed quantitative metric which allows to characterize morphologies of soot aggregates and their modifications in relation to ageing factors like internal mixing state, core-shell structures, phase, and composition heterogeneity. Models have been developed to incorporate D f and mixing diversity metrics of aged soot particles, enabling quantitative assessment of their optical absorption and radiative forcing effects. The microphysical properties of soot and organic particles are complex and they are influenced by particle sources, ageing process, and meteorological conditions. Furthermore, soluble organic particles exhibit diverse forms and can engage in liquid–liquid phase separation with sulfate and nitrate components. Primary carbonaceous particles such as tar balls and soot warrant further attention due to their strong light absorbing properties, presence of toxic organic constituents, and small size, which can impact human health. Future research needs include both atmospheric measurements and modeling approaches, focusing on changes in the mixing structures of soot and organic particle ensembles, their effects on climate dynamics and human health.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2021

n-Butanol production by Rhodopseudomonas palustris TIE-1

Anthropogenic carbon dioxide (CO 2 ) release in the atmosphere from fossil fuel combustion has inspired scientists to study CO 2 to biofuel conversion. Oxygenic phototrophs such as cyanobacteria have been used to produce biofuels using CO 2 . However, oxygen generation during oxygenic photosynthesis adversely affects biofuel production efficiency. To produce n-butanol (biofuel) from CO 2 , here we introduce an n-butanol biosynthesis pathway into an anoxygenic (non-oxygen evolving) photoautotroph, Rhodopseudomonas palustris TIE-1 (TIE-1). Using different carbon, nitrogen, and electron sources, we achieve n-butanol production in wild-type TIE-1 and mutants lacking electron-consuming (nitrogen-fixing) or acetyl-CoA-consuming (polyhydroxybutyrate and glycogen synthesis) pathways. The mutant lacking the nitrogen-fixing pathway produce the highest n-butanol. Coupled with novel hybrid bioelectrochemical platforms, this mutant produces n-butanol using CO 2 , solar panel-generated electricity, and light with high electrical energy conversion efficiency. Overall, this approach showcases TIE-1 as an attractive microbial chassis for carbon-neutral n-butanol bioproduction using sustainable, renewable, and abundant resources.

60 APPLIED LIFE SCIENCES↗