Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “flow reactor”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 271 records · Page 15

University of Missouri Research Reactor LEU Fuel Element Flow Test Conceptual Design—Hydraulic Reactor Design Parameters

The University of Missouri-Columbia Research Reactor (MURR®) is one of five U.S. high performance research reactors (USHPRR), plus one critical facility, that actively collaborates with the National Nuclear Security Administration (NNSA) Material Management and Minimization(M 3 ) Reactor Conversion Program to convert to the use of low-enriched uranium (LEU, < 20 wt.% U-235) fuel. A new type of LEU fuel with very high density, based on an alloy of uranium and 10 weight percent molybdenum (U-10Mo), is expected to allow the conversion to LEU of USHPRR that have been found unable to be converted with previously qualified uranium silicide-aluminum (U 3 Si 2 -Al) dispersion fuel. MURR has been working with the USHPRR Reactor Conversion (RC) Pillar at Argonne National Laboratory to perform fuel element design and fuel cycle performance analyses, steady-state thermal hydraulics safety analyses, and accident safety analyses in preparation for the conversion of MURR and to support a preliminary Safety Analysis Report (SAR) for conversion to LEU fuel. This work is performed in preparation for the flow test campaign that will be conducted by the USHPRR RC Pillar. The purpose of the hydraulic performance evaluation of the MURR LEU fuel element designed by the RC Pillar is to test a prototypic commercially fabricated LEU fuel element to determine whether any failure modes are observed or predicted in the fuel element, including significant deformations such as plate bending, twisting, or plate detachment from the side plate under selected safety-basis limits for reactor hydraulic conditions. To support the design of the flow test for MURR LEU fuel element hydraulic performance evaluation, design parameters for hydraulic testing of the LEU fuel element are laid out in this report.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

A New Scanning Tunneling Microscope Reactor Used for High Pressure and High Temperature Catalysis Studies

We present the design and performance of a home-built high-pressure and high-temperature reactor equipped with a high-resolution scanning tunneling microscope (STM) for catalytic studies. In this design, the STM body, sample, and tip are placed in a small high pressure reactor ({approx}19 cm{sup 3}) located within an ultrahigh vacuum (UHV) chamber. A sealable port on the wall of the reactor separates the high pressure environment in the reactor from the vacuum environment of the STM chamber and permits sample transfer and tip change in UHV. A combination of a sample transfer arm, wobble stick, and sample load-lock system allows fast transfer of samples and tips between the preparation chamber, high pressure reactor, and ambient environment. This STM reactor can work as a batch or flowing reactor at a pressure range of 10{sup -13} to several bars and a temperature range of 300-700 K. Experiments performed on two samples both in vacuum and in high pressure conditions demonstrate the capability of in situ investigations of heterogeneous catalysis and surface chemistry at atomic resolution at a wide pressure range from UHV to a pressure higher than 1 atm.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

CRN Modeling of Ammonia RQL Combustion using a Partially-Stirred Reactor Approach

Ammonia is a promising alternative to hydrogen with high energy density and favorable storage and transport characteristics. However low flammability and a propensity for high nitrogen oxide (NOx) emissions make direct utilization challenging. Recently, two-stage rich-quench-lean (RQL) combustion strategies have shown promise in achieving low NOx emissions with ammonia. In this approach, the rich stage serves to oxidize a portion of the fuel, while thermally decomposing as much of the remaining ammonia as possible, generating hydrogen. In the second (lean) stage, air is rapidly introduced, burning out the hydrogen and residual ammonia. Two-stage RQL combustion of ammonia has been investigated in the open literature both experimentally and numerically. In general, idealized chemical reactor network (CRN) models predict NOx concentrations below that of 2D/3D computational fluid dynamics models and experiments. The primary drivers of these discrepancies may be largely attributed to finite rate mixing non-adiabatic operation. The typical CRN model is comprised of a perfectly-stirred-reactor (PSR), followed by a plug-flow-reactor (PFR), meant to represent the flame, and post-flame zones, respectively. In the two-stage RQL approach two PSR-PFR networks are arranged sequentially, corresponding to the rich and lean stages, with secondary air injection in between. In the authors’ past work, this arrangement has demonstrated the significant sensitivity of exit NOx to the rich stage equivalence ratio, while the amount of secondary air injection was shown to be less critical. In this paper, the CRN model is extended to (1) include the impacts of heat loss and (2) utilize a partially-stirred-reactor (PaSR) approach to study the impacts of mixing on emissions performance. Varying amounts of heat loss are applied to the rich relaxation zone to understand emissions performance and changes to optimization of equivalence ratio and residence time. Premixed and non-premixed configurations are considered in the rich stage PaSR, with varying degrees of mixing intensity to study the interaction between mixing, transport, and kinetic timescales. Critically, the impact of mixing between hot products and secondary air injection is studied to understand practical injector needs. Results show unburnt ammonia leaving the rich stage as a primary contributor to NOx emissions – driven both by increased heat loss and reduced mixing rates. Furthermore, heat losses have shown to create conditions which are conducive to increased N2O formation in the lean stage. The results of this study will be considered in the context of developing optimized two-stage RQL combustors for ammonia..

advanced gas turbines↗

Particulates for additive manufacturing techniques

A method of making a particulate for an additive manufacturing technique includes receiving particulate at a chemical vapor deposition (CVD) reactor, flowing a hydrocarbon gas into the CVD reactor, decomposing the hydrocarbon gas in the CVD reactor, and depositing a carbonaceous coating on the particulate using a product of the decomposed hydrocarbon gas. The coating deposited over the particulate has a reflectivity that is lower than the reflectivity the underlying particulate body to reduce an energy input requirement for purposes of fusing the particulate into a layer of an article using an additive manufacturing technique. In embodiments, the coated particulate can be received at an additive manufacturing apparatus and fused into a layer of an article as a metallic-carbon composite using a high-density energy source.

42 ENGINEERING↗

Reduced chemistry model calibration using unsteady flames with repetitive extinction and ignition

In this paper, combustion in a narrow channel with an imposed temperature gradient is used to calibrate a reduced chemical mechanism. The focus is placed on unsteady flames with repetitive extinction and ignition (FREI) at high pressure. The reduced mechanism follows a hybrid approach, combining a small fuel-dependent submechanism with a detailed fuel-independent submechanism for the core species chemistry. The fuel-dependent submechanism consists of three species and nine reactions describing both the low and high-temperature fuel decomposition pathways. The sensitivity of the extinction and ignition locations to the fuel-dependent reactions is assessed and multiple reactions are found to affect the FREI behavior. The sensitive reactions are calibrated following a Bayesian approach. The calibrated reduced model is compared to a detailed model and good agreement in ignition delay times and laminar flame speeds is observed. Finally, this illustrates the potential of a micro flow reactor with a controlled temperature profile to test fuels, calibrate chemical models, and infer kinetic data.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Fuel Property Characterization and Prediction

This presentation describes the progress made over the last year on the Fuel Property Characterization and Prediction tasks as part of the CoOptima program under the Vehicle Technologies Office. The tasks reviewed are: Fuel Property Blending Model (F.1.2.2 and F.1.2.3), the Heat of Vaporization Measurement for Full Boiling Range Fuels (F.1.3.2), and the Flow Reactor Autoignition Kinetic Mechanism Development and Validation (F.2.1.4) tasks.

33 ADVANCED PROPULSION SYSTEMS↗

Experimental Investigation of Uranium and Iron Condensation from High-Temperature Plasma Conditions

We used a plasma flow reactor (PFR) to generate synthetic fallout nanoparticles from vapor-phase condensation of two different input concentrations of uranium and iron analytes (U/Fe = 1:1 and 1:2). Synthetic fallout from complex chemical matrices (e.g., mixtures of U and Fe) has not been generated in this setup before and allows for the observation of relative condensation and fractionation of nuclear debris. Experiments were conducted under two different temperature histories with variations in particle flow patterns along the PFR. Transmission electron microscopy (TEM) observation and analysis of the nanoparticles revealed variations in speciation of uranium oxides (UO 2 and α-UO 3 ) depending on the competition between flow mixing and oxygen sequestration by iron. A ternary metal oxide, UFeO 4 , was observed in addition to iron oxides (e.g., FeO and Fe 3 O 4 ), which suggests that fallout models should account for chemical speciation of ternary metal oxides (i.e., UFeO 4 ) and their relative condensation behaviors in addition to those of singular metal oxides (e.g., FeO and UO 2 ). X-ray Energy Dispersive Spectroscopy (EDS) elemental maps showed that some particles had Fe-rich cores surrounded by U-rich regions. This suggests that either condensed U oxides coagulate onto molten Fe oxides or that the increase in iron analyte concentration might drive the system toward a higher degree of supersaturation, leading to earlier formation of iron oxide particles and providing an energetically favored pathway for nucleation of uranium oxides around iron oxide particles.

and nuclear chemistry↗

A re-examination of the catalyst activation and temperature hysteresis in methane combustion on Pt/Al 2 O 3

Methane combustion is an industrially important reaction that has been extensively studied. Supported Pt catalysts on Al 2 O 3 exhibit excellent activity in this reaction owing to their Csingle bondH bond activation capability. Pt/Al 2 O 3 catalyst remains almost inactive until the conversion increases abruptly at the ignition temperature (T ign ). The temperature hysteresis behavior has been reported, where after ignition, as the temperature is lowered below T ign , the catalyst continues to exhibit high activity. The activation has been previously attributed to the removal of adsorbed oxygen on Pt sites at T ign , while the hysteresis has been explained by the local temperature elevation caused by the reaction heat. Here in this work, this behavior was re-examined at a small scale in a fixed-bed flow reactor over a range of pre-treatment and reaction mixture conditions. Low-temperature activation was achieved by pre-treating the catalyst with CH 4 . Carefully designed control experiments yielded observations that cannot be rationalized by the existing theory, suggesting that it is incomplete. Based on these new results, we propose a more comprehensive theory describing the active sites in the oxidation reaction as methane-derived adsorbed carbon active sites, and their formation as the controlling factor in the catalyst activation. The hysteresis can be better explained by the enhanced stability of active sites under reaction conditions. In situ infrared spectroscopy and mass spectrometry studies were conducted in a flow cell, providing strong evidence supporting the theory. The dissociative adsorption of CH 4 was studied under a variety of pre-treatment conditions, and proved to be responsible for the active site formation. The fundamental understanding obtained in this work contributes significant insights to the understanding of reaction mechanism.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Shuttle APS propellant thermal conditioner study

The conditioner design concept selected for evaluation consists of an integral reactor and baffle-type heat exchanger. Heat exchange is accomplished by flowing reactor hot gases past a series of slotted and formed plates, through which the conditioned propellant flows. Heat transfer analysis has resulted in the selection of a reactor hot gas nominal mixture ratio of 1.0, giving a combustion temperature of 1560 F with a hydrogen inlet temperature of 275 R. Worst case conditions result in a combustion gas temperature of 2060 F, satisfying the condition of no damage to the conditioner in case of failure to flow cold fluid. In addition, evaluation of hot gas flow requirements and conditioner weight has resulted in the selection of a reactor hot gas exhaust temperature of 750 R.

Fulton, D. L.↗

Initial steady-state core simulation capability or thermal and pool-type molten salt reactors, coupling reactor physics, thermal-hydraulics, and evolving chemistry

This report presents the development and validation of an initial steady-state multiphysics capability for molten salt reactors (MSRs) under the Nuclear Energy Advanced Modeling and Simulation (NEAMS) program in Fiscal Year 2025. The framework integrates neutronics, thermal-hydraulics, species transport, and thermochemistry to capture the coupled dynamics of liquid-fueled systems. Implementation and testing were performed on two representative designs: the Molten Salt Reactor Experiment (MSRE), a thermal-spectrum, channeled-flow reactor, and the Lotus Molten Salt Reactor (L-MSR), a fast-spectrum, pool-type reactor. The modeling suite employs Griffin for reactor physics and depletion, Pronghorn and SAM for thermal-hydraulics, Thermochimica for chemistry, and Saline for thermophysical properties, with benchmarking and validation carried out against historical MSRE data, experimental flow-loop measurements, and reference depletion calculations from Monte Carlo codes. The framework demonstrated the ability to reproduce key reactor behaviors including temperature feedback, reactivity losses, delayed neutron precursor transport, xenon poisoning, and redox potential evolution. The results confirm the feasibility and accuracy of the coupled models in predicting steady-state and selected transient MSR behaviors. This latter ones are used in this report as a proxy indicating that the steady-state models from which the transient starts are accurate. For MSRE, validation showed good agreement with pump start-up and natural circulation tests, while for the L-MSR, benchmarking confirmed hydraulic calibration and consistency of neutronics–thermal coupling. The tools also provided new insights into species transport, noble metal deposition, and salt solidification dynamics. On the Xenon transport front, the code is validated against the steady state Xenon poisoining measurement and showed good agreement with the experimental value. Identified areas for future work include advanced void transport modeling, three-dimensional simulations, improved alloy corrosion models, and tighter integration with high-fidelity Monte Carlo codes. These developments provide a foundation for high-fidelity MSR simulations that can support reactor design optimization, safety assessments, and long-term operational strategies.

42 - ENGINEERING↗

An experimental, theoretical and kinetic modeling study of the N 2 O-H 2 system: Implications for N 2 O + H

The reaction of N 2 O with His the key step in consumption of nitrous oxide in thermal processes. The major product channel is N 2 + OH, while NH + NO constitute minor products. In addition, a pathway involving HNNO, initiated by N 2 O + H (+M)$\rightleftarrows$HNNO (+M) (R3, R4), has been inferred from experiment and theory by Burke and coworkers. At longer reaction times, the reaction may reach partial equilibration, and in addition to k 3 and k 4 the importance of this channel depends on the thermodynamic properties of HNNO and its consumption reactions, mainly HNNO + H. In the present work, we re-examined the thermochemistry of HNNO and calculated rate constants and branching fractions for the HNNO + H reaction. Experiments on the N 2 O-H 2 system were conducted in a high-pressure flow reactor at 100 atm as a function of temperature (600-925 K) and stoichiometry and explained in terms of an updated chemical kinetic model. The results support the importance of the HNNO pathway, which results in inhibition of N 2 O consumption and formation of NH 3 . In addition, selected literature results on the N 2 O-H 2 system are re-examined and the implications for the other product channels of N 2 O + H, in particular NH + NO, are discussed.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Fuel Property Characterization and Prediction

The Fuel Property Characterization and Prediction effect with the Co-Optimization of Fuels and Engines (Co-Optima) initiative is focused on the measurement or prediction of key fuel properties. Efforts under the Vehicle Technologies Office (VTO) have focused on understanding how fuel evaporation phenomena can impact auto-ignition, mixing, and pollutant formation by studying the most important azeotropic interactions between alcohols and gasoline components utilizing a novel Differential Scanning Calorimetry/Thermogravimetric Analysis instrument coupled to a Mass Spectrometer (DSC/TGA/MS). In another effort, Nuclear Magnetic Resonance (NMR) measurements were utilized to understand how oxygenate clusters and networks contribute to vapor pressure effects. This is critical for predicting fuel droplet evaporation and effects on combustion. A method was developed on the Advanced Fuel Ignition Delay Analyzer (AFIDA) to rapidly measure the Research Octane Number (RON) and Sensitivity (S) of samples utilizing small volumes, which will aid in the pace of development of new fuels having targeted properties. Additionally, the AFIDA was employed to develop a method for fast measurement of phi-sensitivity in a bench-scale test that will allow studies of molecular structure effects on mechanism kinetics of this poorly understood kinetic phenomena. A flow reactor was also utilized to investigate the mechanistic basis of phi-sensitivity by identifying and quantitating key species in autoignition mechanisms that can explain phi-sensitivity. The outcomes of these efforts will help ensure that the Co-Optima program can advance the underlying science needed to develop biomass-derived-fuel and advanced engine technologies that will work in tandem to achieve Co-Optima's efficiency, environmental, and economic goals.

33 ADVANCED PROPULSION SYSTEMS↗

CFD-aided benchmark assessment of coal devolatilization one-step models in oxy-coal combustion conditions

Coal devolatilization, as first step in thermochemical processes involving solid fuels, has been targeted in plenty of CFD investigations: despite the variety of models that were developed to define the rate of the process and the amount of volatile matter released, not all of them are suitable for CFD simulations of large-scale coal combustors. Empirical models ensure both simplicity and feasibility, but not full reliability for all coal types and operating conditions. CFD modeling results for coal conversion during devolatilization in an entrained flow reactor and oxy-conditions are presented and compared to experimental data. A benchmark assessment of one-step models on the accuracy of the volatile yield prediction is then performed. It is shown that the heating rate strongly influences the devolatilization process and its modeling, not only in terms of rate but also in terms of yield, which differs significantly from the proximate analysis value. Furthermore, this indicates the need for a model able to predict the variation of coal volatile yield with temperature and heating rate, in addition to the kinetic model.

01 COAL, LIGNITE, AND PEAT↗

Investigation of structural effects of aromatic compounds on sooting tendency with mechanistic insight into ethylphenol isomers

Small aromatic molecules with oxygen-containing functional groups are a promising class of fuel additives, as they can be readily sourced from depolymerized lignin. These oxygenated aromatic compounds (OACs) show a lower sooting tendency than aromatic hydrocarbons, but OACs having alkyl groups such as ethylphenol show a higher sooting tendency than other OACs such as phenol and anisole, despite the oxygen moiety. In this study, we investigate the relationship between chemical structure and soot precursor formation to explain observed differences in the sooting tendency of OACs and to gain insight into how alkyl or oxygenated substituents on the aromatic ring affect soot precursor formation. The weakest bond for 15 aromatic compounds was identified and cleavage of these bonds was shown to generate either benzyl or phenoxy radicals. A linear relationship between standard enthalpy of formation (ΔH f o ) of these radicals and the yield sooting index (YSI) was found, and thus ΔH f ° can be applied as a metric to estimate YSIs of various aromatic compounds; higher ΔH f o of a radical indicates an increase in the radical reactivity and leads to more soot precursor formation. Flow reactor experiments were performed for 2-ethylphenol and 3-ethylphenol to elucidate how ortho and meta substitution effects the sooting tendency. Soot precursors were identified from the experiment and their formation pathways were investigated computationally. 2-ethylphenol produces more oxygenated products than 3-ethylphenol since the ortho position has increased resonance stabilization of radical intermediates, which leads to lower YSI. Overall, these results further inform the selection of potential biomass-derived fuel blendstocks that have favorable sooting tendencies.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Amine Oxidation Catalyzed by NO 2

Amine oxidation is a major risk in the deployment of amine scrubbing for CO2 capture from post-combustion flue gas. Oxidation probably occurs by dissolved oxygen at elevated temperature, Fe(III)/Fe(II) shuttling between the absorber and the stripper, and by NO2 in the absorber. Amine selection, dissolved oxygen removal, and solvent reclaiming mitigate oxidation due to dissolved oxygen and iron shuttle mechanism, but not by NO2. This work examines piperazine (PZ) oxidation by NO2 in a bench-scale high gas flow reactor (HGF). PZ is an effective second-generation solvent with high CO2 capacity, fast capture rate, good thermal stability, and good resistance to oxidation. Flue gas typically contains 0.5–5 ppm NO2 and 10–100 ppm NO. NO2 at 1 ppm in the flue gas appears to cause significant amine oxidation in pilot plant testing. PZ solution can easily absorb NO2, and it is hypothesized that NO2 can catalytically oxidize PZ through free-radical propagation. The issue may not be solved by a NO2 pre-scrubber since the coexistence of NO and O2 in the flue gas will keep producing non-negligible amounts of NO2 in the ductwork and the absorber after the NO2 incoming with the flue gas has been scrubbed. In addition, NO2 may not only oxidize PZ but also the intermediate degradation products, and it is unknown if the existence of dissolved iron influences the oxidation by NO2. Previous workers have also shown that NO2 is the stoichiometric source of nitrosamine. A comprehensive analysis of NO2 oxidation is needed to address solvent management and its health/environmental impact. The new high gas flow (HGF) reactor focuses only on the absorber environment and is simpler to interpret because it does not include oxidation at high temperatures and by dissolved metal catalysts from corrosion. This paper presents the results of HGF experiments and shows evidence to support a hypothesis of amine oxidation catalyzed by NO2, presents the synergic effect of NO2 and iron on amine oxidation, points out the different effects of NO2 in clean and degraded solvents, and demonstrates that NO2 not only can oxidize amines but also their degradation products.

NO2, iron, piperazine (PZ), solvent oxidation, sol↗

Probing the low-temperature chemistry of methyl hexanoate: Insights from oxygenate intermediates

Understanding the combustion of methyl esters is crucial to elucidate kinetic pathways and predict combustion parameters, soot yields, and fuel performance of biodiesel, however most kinetic studies of methyl esters have focused on smaller, surrogate model esters. Methyl hexanoate is a larger methyl ester approaching the chain length of methyl esters found in biodiesel and has not received as much research attention as other smaller esters. The purpose of this work is to present the first atmospheric pressure combustion data of methyl hexanoate, CH 3 CH 2 CH 2 CH 2 CH 2 COOCH 3 . Mixtures of 2% methyl hexanoate in O 2 and N 2 are studied using a plug flow reactor at atmospheric pressure, wall temperatures from 573 to 973 K, residence times from roughly 1-2 s., and fuel equivalence ratios of 1, 1.5, and 2. Exhaust gases are analyzed by a gas chromatograph-mass spectrometer system and species mole fractions are presented. Here, the literature model shows satisfactory agreement with the experimental species profiles and improvements for future mechanistic studies are suggested. In particular, this work proposes new unimolecular decomposition pathways of methyl hexanoate to form methanol or methyl acetate. Furthermore, the experiment detected three unsaturated esters that are direct products of the low temperature oxidation chemistry and it provides more insight into branching ratios for the formation of methyl hexanoate radicals and for the decomposition of hydroperoxyalkyl radicals.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗