SEARCH · Engineering Papers
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
In this paper we present a complete procedure for the extraction and characterization of building structures starting from the three-dimensional (terrain elevation) data provided by interferometric SAR measurements.
We describe a new effort for the computation of elevation derivatives using the Shuttle Radar Topography Mission (SRTM) results. Jet Propulsion Laboratory's (JPL) SRTM has produced a near global database of highly accurate elevation data. The scope of this database enables computing precise stream drainage maps and other derivatives on Continental scales. We describe a computing architecture for this computationally very complex task based on NASA's Information Power Grid (IPG), a distributed high performance computing network based on the GLOBUS infrastructure. The SRTM data characteristics and unique problems they present are discussed. A new algorithm for organizing the conventional extraction algorithms [1] into a cooperating parallel grid is presented as an essential component to adapt to the IPG computing structure. Preliminary results are presented for a Southern California test area, established for comparing SRTM and its results against those produced using the USGS National Elevation Data (NED) model.
The Resource Prospector (RP) mission with the Regolith and Environment Science and Oxygen Lunar Volatile Extraction (RESOLVE) payload aims to show the presence of water in lunar regolith, and establish a proving ground for NASAs mission to Mars. One of the analysis is performed by the Lunar Advanced Volatiles Analysis (LAVA) subsystem, which consists of a fluid network that facilitates the transport of volatile samples to a gas chromatograph and mass spectrometer (GC-MS) instrument. The understanding of fluid dynamics directed from the GC to the MS is important due to the influence of flow rates and pressures that affect the accuracy of and prevent the damage to the overall GC-MS instrument. The micro-scale capillary fluid network within the GC alone has various lengths and inner-diameters; therefore, determination of pressure differentials and flow rates are difficult to model computationally, with additional complexity from the vacuum conditions in space and lack of a lunar atmosphere. A series of tests were performed on an experimental set-up of the system where the inner diameters of the GC transfer line connecting to the MS were varied. The effect on chromatography readings were also studied by applying these lines onto a GC instrument. It was found that a smaller inner diameter transfer line resulted in a lower flow rate, as well as a lower pressure differential across the thermal conductivity detector (TCD) unit of the GC and a negligible pressure drop across the mock-up capillary column. The chromatography was affected with longer retention times and broader peak integrations. It was concluded that a 0.050 mm inner diameter line still proved most suitable for the systems flow rate preferences. In addition, it was evident that this small transfer line portrayed some expense to GC signal characteristics and the wait time for steady-state operation.
The Regolith & Environment Science and Oxygen & Lunar Volatile Extraction (RESOLVE) payload is an exploration system designed to be placed on a rover and driven over the surface of the moon for 9 days to map the distribution of the water ice and other useful compounds seen on previous missions. RESOLVE will drill into the lunar surface and heat the material collected in order to measure the amount of water vapor and other compounds that are present, thus showing how future missions could gather and then use these valuable resources. Future missions will benefit from this analysis tool and others because it will be more cost-effective to mine water components, fuel, and other compounds at the point of destination rather than transport them from Earth. NASA is packaging the RESOLVE payload in the Resource Prospector mission targeted for launch in 2020. NASA continues to explore mission solutions by leveraging partnerships across NASA, industry, other nations and academia.
The Data Mining & Knowledge Management team at Kennedy Space Center is providing data management services to the Frangible Joint Empirical Test (FJET) project at Langley Research Center (LARC). FJET is a project under the NASA Engineering and Safety Center (NESC). The purpose of FJET is to conduct an assessment of mild detonating fuse (MDF) frangible joints (FJs) for human spacecraft separation tasks in support of the NASA Commercial Crew Program. The Data Mining & Knowledge Management team has been tasked with creating and managing a database for the efficient storage and retrieval of FJET test data. This paper details the Extract, Transform, and Load (ETL) process as it is related to gathering FJET test data into a Microsoft SQL relational database, and making that data available to the data users. Lessons learned, procedures implemented, and programming code samples are discussed to help detail the learning experienced as the Data Mining & Knowledge Management team adapted to changing requirements and new technology while maintaining flexibility of design in various aspects of the data management project.
The first steps for In Situ Resource Utilization (ISRU) on target bodies such as the Moon, Mars and Near Earth Asteroids (NEA), and even comets, involve the same sequence of steps as in the terrestrial mining of resources. First exploration including prospecting must occur, and then the resource must be acquired through excavation methods if it is of value. Subsequently a load, haul and dump sequence of events occurs, followed by processing of the resource in an ISRU plant, to produce useful commodities. While these technologies and related supporting operations are mature in terrestrial applications, they will be different in space since the environment and indigenous materials are different than on Earth. In addition, the equipment must be highly automated, since for the majority of the production cycle time, there will be no humans present to assist or intervene. This space mining equipment must withstand a harsh environment which includes vacuum, radical temperature swing cycles, highly abrasive lofted dust, electrostatic effects, van der Waals forces effects, galactic cosmic radiation, solar particle events, high thermal gradients when spanning sunlight terminators, steep slopes into craters / lava tubes and cryogenic temperatures as low as 40 K in permanently shadowed regions. In addition the equipment must be tele-operated from Earth or a local base where the crew is sheltered. If the tele-operation occurs from Earth then significant communications latency effects mandate the use of autonomous control systems in the mining equipment. While this is an extremely challenging engineering design scenario, it is also an opportunity, since the technologies developed in this endeavor could be used in the next generations of terrestrial mining equipment, in order to mine deeper, safer, more economical and with a higher degree of flexibility. New space technologies could precipitate new mining solutions here on Earth. The NASA KSC Swamp Works is an innovation environment and methodology, with associated laboratories that uses lean development methods and creativity-enhancing processes to invent and develop new solutions for space exploration. This paper will discuss the Swamp Works approach to developing space mining and resource extraction systems and the vision of space development it serves. The ultimate goal of the Swamp Works is to expand human civilization into the solar system via the use of local resources utilization. By mining and using the local resources in situ, it is conceivable that one day the logistics supply train from Earth can be eliminated and Earth independence of a space-based community will be enabled.
The dynamic inflow coupling with rotor/body dynamics is crucial in the analysis of stability and control law design for helicopters. Over the past several decades, finite-state inflow models for single rotor configurations in hover, forward flight, and maneuver have developed (Ref.1-3). By capturing the interference effects between rotors, the extension of pressure potential finite state inflow model has promising result for coaxial rotor configuration (Ref.4-6). Recently, the focus of the dynamic inflow modeling has shifted to tandem rotor configurations (Ref.7, 8). The development of the dynamic inflow models for tandem rotor configuration still have some limitations due to the lack of knowledge of rotor-to-rotor interference, and rotor-wake interference. Experimental methods, and computational fluid dynamics methods are commonly used to understand the rotor performance and rotor airload variations, and measure or predict inflow velocity distributions at the rotor desk. The inflow distributions are subsequently used to improve the dynamic inflow models. Tandem rotor configurations have been studied experimentally and computationally for several decades (Ref.9-12). Sweet (Ref.10) observed that a tandem rotor with 76-percent-radius overlap required 14% more induced power at hovering condition, relative to an isolated rotor of equivalent disk area. Sweet also found that, above a shaft-to-shaft distance of 1.03 diameter, the performance of the tandem rotor was nearly the same as two isolated rotors. The objective of the present study is to apply computational fluid dynamics simulations of tandem rotors for the extraction of dynamic inflow models. The extended methodology is first validated by comparing the computed induced power against test data. Subsequently inflow distributions and wake structures are analyzed.
In this paper the task to extract significant built structures in Digital Surface Models is analyzed.
This research proposes a natural language processing enabled risk analysis framework, named Hazard Extraction andAnalysis of Trends (HEAT), and applies the framework to the ICS-209-PLUS data set of wildfire incident responseforms. The HEAT framework produces safety- and risk- relevant analyses, consisting of: (1) a set of hazards extractedfrom text data, (2) a primary analysis using hazard-relevant metrics, such as rate and severity, to form an FMEA-styletable and risk matrix, (3) a time series analysis of metric trends, and (4) a secondary analysis examining potentialpredictors for hazards. Results from HEAT provide quantitative risk-relevant information for high-level hazards doc-umented in existing-state operations. Because of the generalizability of the steps and limited data requirements, HEATcan be applied to any dataset containing narrative text, thus providing a framework for data-driven machine learning-enabled quantitative risk analysis across a variety of domains. To demonstrate HEAT in a case study, we apply theframework to the ICS-209-PLUS dataset of wildland fire incident response forms. Hazards identified in wildfire re-sponse arise from environmental conditions, the mission, and the wildland urban interface. The resulting risk matrixidentifies evacuations as high-risk hazards, while all other identified hazards are medium or serious risk.
Chromatographic and spectrographic analyses of benzene extracts of hydrocarbons and organic non- hydrocarbon compounds from orgueil meteorite
Supersonic transport propulsion system auxiliary power extraction - gas turbines
Compact handtool extracts electronic modules from circuit board socket. It is used on modules that have four small notches in the base of the plastic housing.
Rack mounted chassis units are quickly inserted or extracted by a device which is driven in either direction by turning a simple hand crank. This device is used in aircraft and water craft.
Saponifiable and nonsaponifiable soxlet and cold solvent extracts of soil, carbonaceous meteorite, and sedimentary rocks studied by thin layer chromatography and spectroscopy
General properties and distribution of nucleoside triphosphatases in crude extracts of Escherichia coli
Extraction and bioassay of renin from kidneys of rats given sodium-depleted and sodium-loaded diets
Video densitometer to extract data from video display, specifically densicardiogram
Free and esterified cholesterol in plasma extracts determined by fluorometric means