SEARCH · Engineering Papers

Results for “expansion techniques”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 271 records · Page 15

All sources NASA NTRS DOE OSTI

NASA NTRS1991

Analysis of impact response in composite plates

The problem of impact is of considerable interest in laminated composite materials. Although important contributions have been made in the understanding the impact problem through numerical solutions, an analytical solution has not been available for the problem of impact of laminated plates. The present work gives an analytical solution to this problem, based on the usual Fourier series expansion for simply-supported plates, combined with Laplace transform techniques for the impact problem solution.

Christoforou, A. P.↗

NASA NTRS1991

SP-100 high-temperature advanced radiator development

The development of an advanced radiator concept design meeting SP-100 thermoelectric requirements is reported. Carbon-carbon heat pipes are used to produce this lightweight, high-performance radiator. Two feasibility problems had to be solved to enable the design: the production of a carbon-carbon heat pipe tube with integral fins, and the development of a coating that protects the carbon-carbon substrate from 875-K potassium working fluid. Carbon-carbon tubes with integral fins were successfully produced using a T-300 fiber, an angle interlocking weave architecture, and pitch densification. A barrier coating to protect the inside diameter of these tubes which employed the CVD of niobium over a thin rhenium interlayer was developed. The rhenium interlayer proved to be critical to the success of this coating technique by providing a gradation in the coefficient of thermal expansion, carrying a portion of the induced stress load, improving coating adhesion, and providing a partial carbon diffusion barrier.

Rovang, Richard D.↗

NASA NTRS1995

A new RF package suitable for aeronautical commercial and DSCS satellite applications

Higher levels of integration through the use of GaAs and silicon MMIC devices, a die-cast housing, and the reduction of the number of subassemblies has enabled a large reduction of the size and weight of the electronics package for commercial and military satellite communications. This paper presents an electronics architecture and hardware that utilizes many new integrated circuits and design techniques, and allows flexibility for future satellite frequency changes and expansion. Key features of the radio are extended C-band, InSat, Defense Satellite Communications System (DSCS), and Ku-band coverage options; 70 (or 140) MHz transponder bandwidth or L-band block bandwidth IFs; integrated RS-232 control through local handheld terminal or remote computer; remote control of crystal reference oscillator for aging and temperature compensation; integrated 2 or 5 watt solid-state power amplifiers (SSPA); optional integrated solid-state booster amplifiers to 40 watts; optional external amplifiers to 100 watts; integral beacon tracking with second integrated downcoverter for antenna positioning; radio, including low-noise block converter (LNB) and SSPA, weighs 8.5 kg and measures 32 x 23 x 16.5 cm; environmentally ruggedized for -40 to +60 C; O-ring sealed for waterproofing; passive (convection) cooling; and simple cabling and installation, with a single cable between radio and LNB, and two cables between radio and IF interface. The small size and light weight of the radio make it ideal for mounting on stabilized antenna platforms (gyroscopic or servo). Several input power options (110 or 220 VAC; +48, +12, or -24 VDC) facilitate operation on multiple platforms.

Hamilton, Robert J., Jr.↗

NASA NTRS2015

Development of a Near-Real Time Hail Damage Swath Identification Algorithm for Vegetation

The Midwest is home to one of the world's largest agricultural growing regions. Between the time period of late May through early September, and with irrigation and seasonal rainfall these crops are able to reach their full maturity. Using moderate to high resolution remote sensors, the monitoring of the vegetation can be achieved using the red and near-infrared wavelengths. These wavelengths allow for the calculation of vegetation indices, such as Normalized Difference Vegetation Index (NDVI). The vegetation growth and greenness, in this region, grows and evolves uniformly as the growing season progresses. However one of the biggest threats to Midwest vegetation during the time period is thunderstorms that bring large hail and damaging winds. Hail and wind damage to crops can be very expensive to crop growers and, damage can be spread over long swaths associated with the tracks of the damaging storms. Damage to the vegetation can be apparent in remotely sensed imagery and is visible from space after storms slightly damage the crops, allowing for changes to occur slowly over time as the crops wilt or more readily apparent if the storms strip material from the crops or destroy them completely. Previous work on identifying these hail damage swaths used manual interpretation by the way of moderate and higher resolution satellite imagery. With the development of an automated and near-real time hail swath damage identification algorithm, detection can be improved, and more damage indicators be created in a faster and more efficient way. The automated detection of hail damage swaths will examine short-term, large changes in the vegetation by differencing near-real time eight day NDVI composites and comparing them to post storm imagery from the Moderate Resolution Imaging Spectroradiometer (MODIS) aboard Terra and Aqua and Visible Infrared Imaging Radiometer Suite (VIIRS) aboard Suomi NPP. In addition land surface temperatures from these instruments will be examined as for hail damage swath identification. Initial validation of the automated algorithm is based upon Storm Prediction Center storm reports but also the National Severe Storm Laboratory (NSSL) Maximum Estimated Size Hail (MESH) product. Opportunities for future work are also shown, with focus on expansion of this algorithm with pixel-based image classification techniques for tracking surface changes as a result of severe weather.

Bell, Jordan R.↗

NASA NTRS1977

Satellite-based thunderstorm intensity parameters

Thunderstorm growth rates are investigated through use of infrared data furnished by the Synchronous Meteorological Satellite. Blackbody temperature isotherms provide an accurate method of delineating the areal expansion of cold areas; the blackbody temperature isotherms are valuable analytical tools even in cases when there is very little decrease with time of the minimum cloud top temperature. In an application of the severe storm monitoring technique, the origin of tornadoes is found to be closely linked to a rapid expansion of cold areas in seven out of eight cases.

Adler, R. F.↗

NASA NTRS1982

Effects of translational nonequilibrium on vacuum plume expansions

The plume flowfield of a helium vent nozzle exhausting into a vacuum is defined by two techniques: the method of characteristics and the direct-simulation Monte Carlo method. The method of characteristics is shown to severely underpredict gas static temperatures due to the assumption of translational equilibrium inherent in the continuum formulation. Mass flow per unit solid angle is shown to be accurately predicted for this flowfield by the method of characteristics until the flow angle approaches within 10 deg of the maximum Prandtl-Meyer expansion angle. Improved treatment of the noncontinuum flow within the nozzle (near the lip) is postulated to have minor effects on the accuracy of this continuum method in comparison with translational nonequilibrium in the external flowfield. Possible treatment of translational nonequilibrium by the method of characteristics is discussed.

Guernsey, C. S.↗

NASA NTRS1991

Twenty-five years of aerodynamic research with IR imaging: A survey

Infrared imaging used in aerodynamic research evolved during the last 25 years into a rewarding experimental technique for investigation of body-flow viscous interactions, such as heat flux determination and boundary layer transition. The technique of infrared imaging matched well its capability to produce useful results, with the expansion of testing conditions in the entire spectrum of wind tunnels, from hypersonic high-enthalpy facilities to cryogenic transonic wind tunnels. With unique achievements credited to its past, the current trend suggests a change in attitude towards this technique: from the perception as an exotic, project-oriented tool, to the status of a routine experimental procedure.

Gartenberg, Ehud↗

NASA NTRS2024

Development of a Data Fusion Methodology for Lineload Aerodynamic Databases for a Launch Vehicle during Liftoff and Transition

The need for databases for the distributed loading on launch vehicles during the early portion of flight necessitates the use of expensive computational flows in regimes where wake effects dominate. While also being expensive, this is a regime that computational tools tend to historically have problems simulating accurately. To help tackle this problem, a method of data fusion to combine computational results to wind tunnel derived force and moment data is developed. Using this method, significant reduction in computational costs and increases in confidence of the final product is possible and has been used to generate several databases for the Space Launch System (SLS) at NASA. While the full details of database generation are not part of this work, the crucial method at its core is developed here. Two SLS geometries are used throughout the work to demonstrate the techniques. These are two of the larger geometries and represent both planned crewed missions to the Moon as well as potential cargo missions to deep space. The method uses principal component analysis (PCA) to generate a reduced ordered model (ROM) to help fill in the full parameter space. Other similar techniques are explored, but were not found to have a significant result on the predictions of the ROM. Because the full number of components are kept to generate the model, this lack of difference is expected. This method is then extended to ensure that predicted surfaces match trusted force and moment data derived from wind tunnel testing. This extension is done by setting up a constrained optimization problem in order to minimize the deviation from the surface resolved computational data while still integrating to the desired values. When generating the constrained optimization problem, a weighting factor to balance these competing needs is introduced. The work compares previously introduced weighting terms from similar work to the proposed terms and shows that the previously used terms do not have as desirable behavior in this flow regime. This method is then expanded by developing a technique to incorporate uncertainty quantification into the developed data fusion methodology. This expansion takes a two pronged approach. One examines transferring the uncertainties in the force and moment database and characterizes how those adjustments change the predicted lineloads. The second looks at model form error and looks how rebuilding the model using slightly different data changes the predictions. These two terms are then combined in order to create an uncertainty model that takes both effects into account. The limitations of the proposed methods is then discussed as well as possible techniques to address these shortcomings.

Launch Vehicles↗

NASA NTRS1967

Investigation of Solder Cracking Problems on Printed Circuit Boards

A Solder Committee designated to investigate a solder cracking phenomena occurring on the SATURN electrical/electronic hardware found the cause to be induced stress in the soldered connections rather than faulty soldering techniques. The design of the printed circuit (PC) board assemblies did not allow for thermal expansion of the boards that occurred during normal operation. The difference between the thermal expansion properties of the boards and component lead materials caused stress and cracking in the soldered connections. The failure mechanism and various PC boards component mounting configurations are examined in this report. Effective rework techniques using flanged tubelets, copper tubelets, and soft copper wiring are detailed. Future design considerations to provide adequate strain relief in mounting configurations are included to ensure successful solder terminations.

CIRCUIT BOARD↗

NASA NTRS1988

Parallel pseudospectral domain decomposition techniques

The influence of interface boundary conditions on the ability to parallelize pseudospectral multidomain algorithms is investigated. Using the properties of spectral expansions, a novel parallel two domain procedure is generalized to an arbitrary number of domains each of which can be solved on a separate processor. This interface boundary condition considerably simplifies influence matrix techniques.

Gottlieb, David↗

NASA NTRS1989

Parallel pseudospectral domain decomposition techniques

Gottlieb, David↗

NASA NTRS1977

Streamtube analysis of a hydrogen-burning scramjet exhaust and simulation technique

A scramjet/airframe integration program and a technique for simulating thermally perfect scramjet exhaust flows (freon/argon gas blends) is studied to extend the technique to more complicated flows approaching the actual exhaust flow in complexity. The state of the flow and the accuracy of the substitute gas simulation are analyzed in the case of a shock discontinuity present. Findings are: scramjet exhaust flow is essentially frozen throughout the expansion at Mach 6 and Mach 8; flow behind moderate shocks remains frozen; the technique can accurately track static distributions in scramjet exhaust flows (shocked or unshocked).

Talcott, N. A., Jr.↗

NASA NTRS1985

Numerical simulation of a turbulent flame stabilized behind a rearward-facing step

Flow of combustible mixtures in a plane channel past a smooth contraction followed by an abrupt expansion, in a typical dump combustor configuration, is modeled by a two-dimensional numerical technique based on the random vortex method. Both the inert and the reacting case are considered. In the latter, the flame is treated as an interface, self-advancing at a prescribed normal burning speed, while the dynamic effects of expansion due to the exothermicity of combustion are expressed by volumetric source lines delineated by its front. Solutions are shown to be in satisfactory agreement with experimental results, especially with respect to global properties such as the average velocity profiles and the reattachment length. The stochastic turbulent velocity components manifest interesting differences, especially near the walls where three-dimensional effects of turbulence are expected to be of importance.

Hsiao, C. C.↗

NASA NTRS2003

NASA Glenn/AADC-Rolls Royce Collaborated to Measure Erosion Resistance on Coated Polymer Matrix Composites

Polymer matrix composites (PMCs) are increasingly used in aerospace and automotive applications because of their light weight and high strength-to-weight ratio relative to metals. However, a major drawback of PMCs is poor abrasion resistance, which restricts their use, especially at high temperatures. Simply applying a hard coating on PMCs to improve abrasion and erosion resistance is not effective since coating durability is short lived (ref. 1). Generally, PMCs have higher coefficients of thermal expansion than metallic or ceramic coatings have, and coating adhesion suffers because of poor interfacial adhesion strength. One technique commonly used to improve coating adhesion or durability is the use of bond coats that are interleaved between a coating and a substrate with vastly different coefficients of thermal expansion. An example of this remedy is the use of bondcoats for ceramic thermal barrier coatings on metallic turbine components (ref. 2). Prior collaborative research between the NASA Glenn Research Center and the Allison Advanced Development Company (AADC) demonstrated that bond coats sandwiched between PMCs and high-quality plasma-sprayed, erosion-resistant coatings substantially improved the erosion resistance of PMCs (ref. 3). One unresolved problem in this earlier collaboration was that there was no easy, accurate way to measure the coating erosion wear scar. Coating wear was determined by both profilometry and optical microscopy. Both techniques are time consuming. Wear measurement by optical microscopy requires sample destruction and does not provide a comprehensive measure of the entire wear volume. An even more subtle, yet critical, problem is that these erosion coatings contain two or more materials with different densities. Therefore, simply measuring specimen mass loss before and after erosion will not provide an accurate gauge for coating and/or substrate volume loss. By using a noncontact technique called scanning optical interferometry, which was recently developed at Glenn, researchers can accurately determine the wear performance of erosion-coated PMCs while preserving the sample. An example of this interferometry technique is shown in the preceding figure for an erosion-coated inlet guide vane from a Rolls Royce AE3007 regional gas turbine jet engine. Erosion was conducted with coated and uncoated PMC vanes, with the abrasive material moving at a velocity of 229 m/s at impingement angles of 20 and 90 degrees. The coatings for PMCs remarkably reduced the erosion volume loss by a factor of approximately 10. Currently, several erosion coatings for PMCs are being compared and downselected for engine testing at Rolls Royce.

Miyoshi, Kazuhisa↗

NASA NTRS1972

The calculation of the eigenvalues and eigenfunctions of Mathieu's equation

The eigenfunctions of Mathieu's equation are expanded in trigonometric series, and the resulting eigenvalue problem is cast in matrix form. This matrix is found to be a symmetric, triagonal matrix, and the eigenvalues are computed using the bisection method. The eigenfunction expansion coefficients are obtained by the standard recursion method. This computational technique for the eigenvalues and eigenfunctions of Mathieu's equation is both rapid and accurate.

Hodge, D. B.↗

NASA NTRS1975

Effects of vibrational nonequilibrium on the inviscid design of an axisymmetric nozzle for hypersonic flow

An axisymmetric, hypersonic nozzle for arc-heated air is described. The method of characteristics is used to compute an inviscid nozzle contour in which vibrational nonequilibrium is approximated by the sudden-freeze technique. Chemical reactions are shown to freeze early in the nozzle expansion, and the result of vibrational and chemical freezing on the nozzle contour is demonstrated. The approximate nozzle design is analyzed by an exact calculation based on the method of characteristics for flow with vibrational nonequilibrium. Exit profiles are computed, and the usefulness of the approximate design is discussed. An analysis of the nozzle performance at off-design conditions is presented.

Anders, J. B., Jr.↗

NASA NTRS1989

X-ray diffraction measurements of residual stresses in SiC/Ti composites

Residual stresses are developed in metal matrix composites during consolidation because of the difference in the coefficient of thermal expansion of the fiber and matrix constituents. X-ray diffraction techniques were used to measure tensile residual stresses in the matrix component of two different titanium alloy composites reinforced with continuous silicon carbide fibers. The titanium alloy matrices were a beta-stabilized alloy Ti-15V-3Al-3Cr-3Sn, and an ordered multiphase (alpha + beta) alloy, Ti-14Al-21Nb. Residual tensile stresses as high as 62 percent of the yield of Ti-15V-3Al-3Cr-3Sn and 70 percent of the yield of Ti-14Al-21Nb were measured in the longitudinal direction on unidirectionally reinforced composites. By measuring residual stresses in four different composite lay-ups, the composite lay-up was determined to have a significant effect on the residual stress state near the surface.

Brown, K. M.↗

NASA NTRS1996

Brazing Dissimilar Metals

Brazing effective technique for joining ordinary structural metals to brittle, low-thermal-expansion refractory metals. Specifically, brazing process established for joining copper or nickel flanges to ends of vacuum-plasma-sprayed tungsten tubes and for joining stainless-steel flanges to ends of tubes made of alloy of molybdenum with 40 percent of rhenium.

Krotz, Phillip D.↗