Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “electrostatic analyzer”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 271 records · Page 15
All sourcesNASA NTRSDOE OSTI
NASA NTRS2004

A MEMS Micro-Translation Stage with Long Linear Translation

A MEMS Micro-Translation Stage (MTS) actuator concept has been developed that is capable of traveling long distances, while maintaining low power, low voltage, and accuracy as required by many applications, including optical coupling. The Micro-Translation Stage (MTS) uses capacitive electrostatic forces in a linear motor application, with stationary stators arranged linearly on both sides of a channel, and matching rotors on a moveable shuttle. This creates a force that allows the shuttle to be pulled along the channel. It is designed to carry 100 micron-sized elements on the top surface, and can travel back and forth in the channel, either in a stepping fashion allowing many interim stops, or it can maintain constant adjustable speeds for a controlled scanning motion. The MTS travel range is limited only by the size of the fabrication wafer. Analytical modeling and simulations were performed based on the fabrication process, to assure the stresses, friction and electrostatic forces were acceptable to allow successful operation of this device. The translation forces were analyzed to be near 0.5 micron N, with a 300 micron N stop-to-stop time of 11.8 ms.

Ferguson, Cynthia K.↗
DOE OSTI2026

Analysis of the electrical double layer using electrochemical X-ray photoelectron spectroscopy

The element-sensitivity of X-ray spectroscopies offers the potential to disentangle the individual chemistries of water, ions, and adsorbates at the electrode-electrolyte interface in an element-by-element manner. However, targeted experimental design is needed to establish interface-sensitive in situ X-ray spectroscopy in a realistic electrochemical environment. Here, we demonstrate how electrochemical X-ray photoelectron spectroscopy (EC-XPS) in the dip-and-pull geometry can be used to specifically probe the behavior of ions in the electrical double layer. Taking the case study of a polycrystalline Au foil in 50 mM KClO 4 electrolyte, we tracked the electrochemical response of interfacial K + cations across a broad potential range. We show how, in combination with modeling, key parameters such as the potential of zero charge (PZC), ion packing behavior, dielectric saturation, and the electrostatic potential decay in the double layer can be extracted from the data. Importantly, we also analyze how the experimental conditions and non-idealities can influence the results and put forward criteria for reliable experimentation and data analysis.

Dip-and-pull↗
NASA NTRS1991

A charging study of the ACTS satellite using NASCAP

The results of a charging study conducted with the NASA Charging Analyzer Program (NASCAP) using a model of the Advanced Communications Technology Satellite (ACTS) are presented. The electrostatic discharge mechanisms are described including the field and potential threshold values that were monitored during the NASCAP simulation. Particular attention is given to the charging behavior of the ACTS inclined antennas. The data obtained indicate that the possibility of a discharge occurring in the immediate vicinity of the antennas is minimal when the semiconducting paint layer on the antenna's front surface has sufficient surface conductivity. It is shown that the metallized multilayer insulating blanket ACTS design provides good electrostatic discharge control.

Herr, Joel L.↗
DOE OSTI2020

Comparing Experimental Phase Behavior of Ion-Doped Block Copolymers with Theoretical Predictions Based on Selective Ion Solvation

The effects of salt-doping on the morphological behavior of block copolymers are well established but remain poorly understood, partially because of the challenge of resolving electrostatics in a heterogeneous medium with low average permittivity. By employing a recently developed field theory, we analyze the phase behavior of polystyrene-b-poly(ethylene oxide) (SEO) copolymers doped with lithium bis(trifluoromethanesulfonyl)imide salts (LiTFSI). Using a single fitting parameter, the ionic solvation radius, we obtain qualitative agreement between our theory and experimental data over a range of polymer molecular weights and copolymer compositions. Such agreement supports and highlights the need of solvation free energy to accurately describe the self-assembly of ion-doped block copolymers and demonstrates that experimentally observed dependence on molecular weight, not present in neutral block copolymers, can be rationalized by solvation effects. Overall, morphological variations are stronger than those predicted by the leading, linear order theory but can be captured by the full model.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
NASA NTRS1975

Flight transition data for angles of attack at Mach 22 with correlations of the data

Boundary-layer transition data for angles of attack from 2.5 to 47 deg from a flight experiment with a cone that reentered at angles of attack up to 75 deg were analyzed and their local flow conditions are presented. The transition data were obtained from both acoustic and electrostatic sensors. The data from the acoustic and electrostatic sensors were correlated by use of three different sets of correlating parameters. For each set of correlating parameters, the transitional and turbulent data from the acoustic and electrostatic sensors were plotted separately. Each of the correlations was compared with a linear curve fit of previous cone-flight data at near zero angle of attack. Results indicate that the data from acoustic sensors falls below the linear curve fits to the flight data and indicates the sensitivity of the sensors. It is shown that the transition data from the electrostatic sensors tends to scatter much more than the data from the acoustic sensors. However, the data from the electrostatic sensors tends to scatter about the linear curve fits based on previous flight data.

Johnson, C. B.↗
NASA NTRS2003

Deposition of Nanostructured Thin Film from Size-Classified Nanoparticles

Materials comprising nanometer-sized grains (approximately 1_50 nm) exhibit properties dramatically different from those of their homogeneous and uniform counterparts. These properties vary with size, shape, and composition of nanoscale grains. Thus, nanoparticles may be used as building blocks to engineer tailor-made artificial materials with desired properties, such as non-linear optical absorption, tunable light emission, charge-storage behavior, selective catalytic activity, and countless other characteristics. This bottom-up engineering approach requires exquisite control over nanoparticle size, shape, and composition. We describe the design and characterization of an aerosol system conceived for the deposition of size classified nanoparticles whose performance is consistent with these strict demands. A nanoparticle aerosol is generated by laser ablation and sorted according to size using a differential mobility analyzer. Nanoparticles within a chosen window of sizes (e.g., (8.0 plus or minus 0.6) nm) are deposited electrostatically on a surface forming a film of the desired material. The system allows the assembly and engineering of thin films using size-classified nanoparticles as building blocks.

Camata, Renato P.↗
NASA NTRS2003

Non-destructive evaluation method employing dielectric electrostatic ultrasonic transducers

An acoustic nonlinearity parameter (.beta.) measurement method and system for Non-Destructive Evaluation (NDE) of materials and structural members novelly employs a loosely mounted dielectric electrostatic ultrasonic transducer (DEUT) to receive and convert ultrasonic energy into an electrical signal which can be analyzed to determine the .beta. of the test material. The dielectric material is ferroelectric with a high dielectric constant .di-elect cons.. A computer-controlled measurement system coupled to the DEUT contains an excitation signal generator section and a measurement and analysis section. As a result, the DEUT measures the absolute particle displacement amplitudes in test material, leading to derivation of the nonlinearity parameter (.beta.) without the costly, low field reliability methods of the prior art.

Yost, William T.↗
NASA NTRS1992

Electrostatic waves due to field-aligned electron beams in the low-latitude boundary layer

Mass-resolved ion, electron, and plasma wave data obtained from several low-latitude boundary layer (LLBL) crossings by the AMPTE CCE satellite are analyzed. The data clearly separate the LLBL from the adjacent magnetosheath and magnetosphere. Attention was focused on wave-particle interactions involving electrons. Electron beams were found to be present in the LLBL during the southward interplanetary magnetic field, along with a simultaneous enhancement of electrostatic waves with parallel polarization. Linear theory analysis shows that for plasma conditions in the LLBL, electron beams are unstable to electrostatic waves that propagate parallel to the local magnetic field, in agreement with observations. A numerical simulation study of the beam-plasma interaction in the LLBL shows that the instability saturates by thermalization of the beam but that a beamlike structure can still remain in the electron distribution for certain initial parameters. It is suggested that peaks in the electron velocity distribution function may be found in the LLBL away from the beam source region.

Peroomian, V.↗
NASA NTRS1992

NASCAP/LEO simulations of Shuttle Orbiter charging during the SAMPIE experiment

The electrostatic charging of the Space Shuttle Orbiter during the operation of the Solar Array Module Plasma Interaction Experiment (SAMPIE) was modeled using the NASA Charging Analyzer Program/ low Earth orbit (NASCAP/LEO) computer code. The SAMPIE experiment consists of an array of various solar cells representing the present technologies. The objectives of the experiment are to investigate the arcing and current collection characteristics of these cells when biased to high potentials in a LEO plasma. NASCAP/LEO is a 3-D code designed to simulate the electrostatic charging of a spacecraft exposed to a plasma at LEO or ground test conditions. At its most extreme configuration, with the largest array segment of the SAMPIE experiment biased + 600 V with respect to the orbiter and facing the ram direction, the computer simulations predict that the orbiter's potential will be approximately -20 V with respect to the plasma.

Chock, Ricaurte↗
NASA NTRS1991

Theory and simulation of a high-frequency magnetic drift wave

The equilibrium of a nonneutral plasma in a toroidal vessel with a toroidal magnetic field is analyzed. In the zero inertia limit it is heuristically shown from force balance considerations that there is an electrostatic hoop force and a force due to diamagnetism along the major radius. The problem of equilibrium is formulated in terms of solutions of a 2D partial difference equation. This equation is solved in the large-aspect-ratio limit and a general expression for the shift of the potential axis is obtained which shows that the shift is approximately epsilon and that it depends solely on the internal capacitance of the cloud. The simulation study is based upon the modified MHD equations and the nonlocal nature of the mode is investigated. Applications to sub-Alfvenic plasma expansions, electromagnetic waves in the earth's magnetosphere, and plasma switches are discussed.

Huba, J. D.↗
NASA NTRS1980

Evaluation of charge control techniques on spacecraft thermal surfaces (electrostatic discharge study)

The charging and discharging characteristics of various dielectric materials commonly used on spacecraft were tested. The experimental apparatus and the calculations used to analyze the data generated during the testing are described. The test technique, results, and analysis used are presented. Indium tin oxide coated Teflon, Kapton, and quartz do not charge significantly. CTL 15 white paint shows no large charge build up. Pinholes in Teflon and Kapton increase the leakage through the sample and reduce the energy released in an arc. Conductive grids in Teflon and Kapton reduce the arc energy by two orders of magnitude over untreated samples. Extreme low temperatures (-195 C) do not significantly increase the arc energy of the gridded sample.

Robinson, P. A., Jr.↗
NASA NTRS2005

Promising Results from Three NASA SBIR Solar Array Technology Development Programs

Results from three NASA SBIR solar array technology programs are presented. The programs discussed are: 1) Thin Film Photovoltaic UltraFlex Solar Array; 2) Low Cost/Mass Electrostatically Clean Solar Array (ESCA); and 3) Stretched Lens Array SquareRigger (SLASR). The purpose of the Thin Film UltraFlex (TFUF) Program is to mature and validate the use of advanced flexible thin film photovoltaics blankets as the electrical subsystem element within an UltraFlex solar array structural system. In this program operational prototype flexible array segments, using United Solar amorphous silicon cells, are being manufactured and tested for the flight qualified UltraFlex structure. In addition, large size (e.g. 10 kW GEO) TFUF wing systems are being designed and analyzed. Thermal cycle and electrical test and analysis results from the TFUF program are presented. The purpose of the second program entitled, Low Cost/Mass Electrostatically Clean Solar Array (ESCA) System, is to develop an Electrostatically Clean Solar Array meeting NASA s design requirements and ready this technology for commercialization and use on the NASA MMS and GED missions. The ESCA designs developed use flight proven materials and processes to create a ESCA system that yields low cost, low mass, high reliability, high power density, and is adaptable to any cell type and coverglass thickness. All program objectives, which included developing specifications, creating ESCA concepts, concept analysis and trade studies, producing detailed designs of the most promising ESCA treatments, manufacturing ESCA demonstration panels, and LEO (2,000 cycles) and GEO (1,350 cycles) thermal cycling testing of the down-selected designs were successfully achieved. The purpose of the third program entitled, "High Power Platform for the Stretched Lens Array," is to develop an extremely lightweight, high efficiency, high power, high voltage, and low stowed volume solar array suitable for very high power (multi-kW to MW) applications. These objectives are achieved by combining two cutting edge technologies, the SquareRigger solar array structure and the Stretched Lens Array (SLA). The SLA SquareRigger solar array is termed SLASR. All program objectives, which included developing specifications, creating preliminary designs for a near-term SLASR, detailed structural, mass, power, and sizing analyses, fabrication and power testing of a functional flight-like SLASR solar blanket, were successfully achieved.

Eskenazi, Mike↗
DOE OSTI2022

Ultra-low-level measurements of airborne fission products from the Fukushima Daiichi reactor accident using high volume collection systems at Savannah River National Laboratory

For this study, ultra-low-level measurements of radionuclides in air have been conducted at the Savannah River National Laboratory (SRNL) to determine the atmospheric concentration of fission products released following the Fukushima Daiichi reactor accident on March 11, 2011. Air filter samples were acquired from two high-volume collection systems (a traditional filter-based system and an electrostatic precipitator-based system) to monitor airborne radionuclide concentrations in the period covering from 2 weeks to 3 years after the disaster. The world-wide spread of low-level concentrations of airborne fission products from the Fukushima event provided a unique opportunity to demonstrate SRNL's electrostatic particle collection technology and other improvements in environmental monitoring developed at the Savannah River Site (SRS). Detecting and analyzing the release allowed a comprehensive test of SRS systems for monitoring environmental radioactivity. Gamma-ray-emitting fission products ( 131,132 I, 134,136,137 Cs, and 129,132 Te) and cosmogenic isotopes ( 7 Be and 22 Na) in air were detected and quantified by high-resolution gamma-ray spectroscopy at concentrations as low as 0.07 μBq per standard cubic meter (SCM) (50 mBq total 137 Cs), while plutonium content was quantified by thermal ionization mass spectrometry (TIMS) at concentrations as low as 6.5 × 10 –21 g/SCM (3.0 fg 239+240 Pu). Isotope concentrations measured at SRNL from gamma-ray spectroscopy were compared to independent measurements from Chapel Hill, NC, located approximately 370 km (230 mi) NE of SRNL. Meteorological modeling was also used to predict radionuclide transport from the location of release to both measurement locations.

63 RADIATION, THERMAL, AND OTHER ENVIRON. POLLUTAN↗
NASA NTRS1980

NASCAP modelling computations on large optics spacecraft in geosynchronous substorm environments

Satellites in geosynchronous orbits have been found to be charged to significant negative voltages during encounters with geomagnetic substorms. When satellite surfaces are charged, there is a probability of enhanced contamination from charged particles attracted back to the satellite by electrostatic forces. This could be particularly disturbing to large satellites using sensitive optical systems. In this study the NASA Charging Analyzer Program (NASCAP) is used to evaluate qualitatively the possibility of such enhanced contamination on a conceptual version of a large satellite. The evaluation is made by computing surface voltages on the satellite due to encounters with substorm environments and then computing charged-particle trajectories in the electric fields around the satellite. Particular attention is paid to the possibility of contaminants reaching a mirror surface inside a dielectric tube because this mirror represents a shielded optical surface in the satellite model used. Deposition of low energy charged particles from other parts of the spacecraft onto the mirror was found to be possible in the assumed moderate substorm environment condition. In the assumed severe substorm environment condition, however, voltage build up on the inside and edges of the dielectric tube in which the mirror is located prevents contaminants from reaching the mirror surface.

Stevens, N. J.↗
NASA NTRS1986

Interaction of upgoing auroral H(+) and O(+) beams

Data from the S3-3 and DE 1 satellites are analyzed to study the interaction between H(+) and O(+) ions in upgoing auroral beams. Every data set analyzed showed some evidence of an interaction. The measured plasma was found to be unstable to a low-frequency electrostatic wave that propagates at an oblique angle to vector-B(0). A second wave, which can propagate parallel to vector-B(0), is weakly damped in the plasma studied in most detail. It is likely that the upgoing ion beams generate this parallel wave at lower altitudes. The resulting wave-particle interactions qualitatively can explain most of the features observed in ion distribution functions.

Kaufmann, R. L.↗
NASA NTRS1976

Lunar perturbations in columnar electron content and their interpretation in terms of dynamo electrostatic fields

Both the sun and the moon exert influences on the ionosphere, causing fluctuations in its electron content. The small lunar effects, though not negligible, are difficult to analyze because their periodicities differ little from the periodicity of the dominant solar effects. A finite duration impulse response filter was perfected, permitting the efficient splitting of our columnar electron content data into a solar, a lunar, and a residual component. The solar component plus the lunar component and the solar component alone were processed by a dynamic ionospheric simulation program that yields values of vertical plasma drifts when electron content data are used as input. The difference between the two plasma drifts so obtained was taken as being the plasma drift caused by the electric field generated by the lunar tides in the dynamo region. This technique appears to be the first to allow a direct estimation of the lunar-induced electric fields in the ionosphere.

Bernhardt, P. A.↗
DOE OSTI2025

Toward an Understanding of Linear Scaling Relations through Energy Decomposition Analysis

The discovery of linear scaling relations has fundamentally changed the field of heterogeneous catalysis. The scaling relations have been rationalized based on the d-band theory, specifically a separation of sp and d electron contributions to adsorption energies. Within the framework of energy decomposition analysis, a full understanding of such a separation would require one to further break down the adsorption energy into distinct energy components such as electrostatics, polarization, charge transfer, and van der Waals interactions, and to examine the sp and d contributions to each of them. As a step in this direction, we analyzed the interaction energy between CH x (x = 1–4) adsorbates and fcc(100) transition metal surfaces (M = Cu, Ag, Au, Rh, and Pt), with the surfaces represented both as slabs in plane-wave density functional theory (pw-DFT) calculations and as atomic clusters in atomic-orbital basis density functional theory (ao-DFT) calculations. Through an absolutely localized molecular orbital (ALMO) based energy decomposition analysis of the ao-DFT adsorption energy, each of the interaction energy components (electrostatics, polarization, van der Waals, and charge transfer) was found to follow its own scaling relations, with an intricate interplay among these energy components yielding the overall scaling relations for the total adsorption energies. Using the recently introduced ALMO-based polarization and charge-transfer analysis schemes, we further dissected polarization into metal surface and adsorbate contributions, and charge transfer into metal → adsorbate and adsorbate → metal contributions. The contributions from the sp and d electrons of the metal to these terms were further quantified, and the dominant role of the metal d electrons was reaffirmed. These results shed light on how CHx adsorbates interact with metal surfaces and further reveal the physical origin of the scaling relations.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
NASA NTRS1985

Comparative in situ studies of the unstable day-time equatorial E-region

Three in situ rocket observations of electrostatic fluctuations which characterize the strong, mild, and weak day-time unstable E-region are compared. The fluctuations are analyzed in relation to the ambient electron density gradients, the measured or inferred drift velocities and, where possible, to simultaneous VHF backscatter radar measurements. Based on these parameters, the linear dispersion relation is solved to find the range of altitudes and wavenumbers for which the growth rate indicates that instability will occur. These computations are compared with actual observations of the irregularities. How well the linear growth rate predicts the altitude range of the unstable layer, and to what extent the regime of the unstable wavenumbers is reflected in the spectra of the irregularities, is shown. Overall, the agreement is good.

Pfaff, R. F.↗