Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “electron yield”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 271 records · Page 15
All sourcesNASA NTRSDOE OSTI
NASA NTRS1990

A plasma density model for Saturn based on Voyager observations

The present combination of ion and electron data sets from both Voyager flybys are to yield the broad view of the Saturn plasma environment indicates that a small, -10 to -20 V spacecraft potential furnishes a plausible basis for reconciliation of differences between observed ion and electron densities. A map of density contours within L = 12 is produced which incorporates all available Voyager thermal plasma data in this region, assuming that the inner mesosphere was stable during the nine months between encounters. The oxygen flux tube content decreases rapidly within L = 5, indicating the occurrence of losses in this region. Neural atom lifetimes in the inner magnetosphere lie in the range of weeks to years, and are a strong function of latitude.

Richardson, John D.↗
NASA NTRS1972

Experimental plasma studies

The rate coefficients for the reactions C(+) + e(-) + e(-) yields C + e(-) and CO(+) + e(-) yields C + O were measured over the electron temperature range of approximately 1500 deg K to 7000 deg K. The measurements were performed in CO that had expanded from equilibrium reservoir conditions of 7060 deg K at 17.3 atm pressure and from 6260 deg K at 10.0 atm pressure. Two RAM flight probes were used to measure electron density and electron temperature in the expanding flow of a shock tunnel. Experiments were performed in the inviscid flow with both probes and in the nozzle-wall boundary layer with the constant bias-voltage probe. The distributions of electron density and electron temperature were independently measured using voltage-swept thin-wire probes. Thin-wire Langmuir probes were also used to measure the electron-density and electron-temperature distributions in the boundary layer of a sharp flat plate located on the nozzle centerline. Admittance measurements were performed with the RAM C and RAM C-C S-band antennas in the presence of an ionized boundary layer.

Dunn, M. G.↗
NASA NTRS1976

Relativistic electrons and whistlers in Jupiter's magnetosphere

The path-integrated gain of parallel propagating whistlers driven unstable by an anisotropic distribution of relativistic electrons in the stable trapping region of Jupiter's inner magnetosphere was computed. The requirement that a gain of 3 e-foldings of power balance the power lost by imperfect reflection along the flux tube sets a stably-trapped flux of electrons which is close to the non-relativistic result. Comparison with measurements shows that observed fluxes are near the stably-trapped limit, which suggests that whistler wave intensities may be high enough to cause significant diffusion of electrons accounting for the observed reduction of phase space densities. A crude estimate of the wave intensity necessary to diffuse electrons on a radial diffusion time scale yields a lower limit for the magnetic field fluctuation intensity.

Barbosa, D. D.↗
NASA NTRS1979

Nuclear pumped electronic transition laser studies

An experiment is proposed that should yield unambiguous absolute results on the production efficiency of rare gas excimers from fission fragments. Laser threshold efficiency is parameterized and calculations indicate that some lasers can be operated using relatively simple experimental apparatus adjacent to GODIVA. Operation of a KrF excimer laser adjacent to GODIVA appears to be possible, although the neutron pulse width is not well matched to the laser pulse duration. However, calculation indicates that KrF excimer laser output on the order of a joule may be possible.

Hughes, W. M.↗
NASA NTRS1981

Chatanika radar measurements of the electrical properties of auroral arcs

Ionospheric parameters measured in the presence of auroral arcs by the incoherent scatter Chatanika radar are used to define properties of the arcs. The radar broadcasts at 3-5 MW with a range resolution of 4.5 km along the radar line-of-sight, and has yielded auroral measurements on the variation of electron density, Hall and Pederson conductivity, horizontal electric fields, electrojet currents, precipitating electron energy flux, and the Joule heating rate. Elevation-scan techniques have been utilized to study the latitude and altitude variation of the ionospheric plasma parameters, and fixed-position scans allow determination of ionization conditions, including the electric fields and the acceleration of precipitating auroral electrons. Arcs in the diffuse aurora have been found to be local conductivity enhancements, while discrete arcs correspond to the boundary plasma sheet and have an asymmetric electric field pattern reduced on the northward side.

Vondrak, R. R.↗
NASA NTRS1985

GeV gamma-ray astronomy telescopes with high angular resolution

Gamma-ray telescopes flown on satellites have poor angular resolution with typical point source error circles of a few square degrees. It is shown that a major improvement in angular resolution for the detection of gamma-rays in the GeV region can be obtained with a single crystal as converter. The electron produced by a gamma ray incident at a small angle to a major crystal axis or plane is captured into channeling and radiates gamma rays. The channeling radiation and the electron-positron pair can be detected and yield point source locations with a precision of 5 arcseconds at 10 GeV. This is an improvement of three orders of magnitude on the angular precision of telescopes sensitive to gamma-rays above 50 MeV flown on Satellites.

Mcbreen, B.↗
NASA NTRS1985

A spectral analysis of the low temperature material in spicules

The resonance lines of Na, Sr(+), and the Mg triplet system, together with the middle H Balmer lines, are used to determine the plasma parameters in the low temperature parts of spicules. Results are presented for heights of 2100 and 2500 km according to the chromospheric line emission data reported by Dunn, et al. (1968) for the 1962 eclipse. In addition to obtaining values for the electron density, this method is unique in yielding direct results for the degree of hydrogen ionization, the hydrogen density, and the line-of-sight thickness of emitting material. Temperature, microturbulence, and vertical flow velocity are more loosely determined in ranges corresponding to allowed combinations of these quantities.

Landman, D. A.↗
NASA NTRS1991

Multiple fiberoptic probe for several sensing applications

A multiple fiber-optic particle sizing probe which uses a linear array of 11 optical fibers positioned in the focal plane of a graded index microlens is presented. The probe, a compact optical spectrum analyzer, provides simultaneous filtering of the angular spectrum of an extended quasi-monochromatic source. Active and passive configurations provide accurate measurements of the particle size distributions. The multiple fiber-optic probe together with processing electronics is a particle sizing sensor which yields the size distribution within 1-2 min.

Dhadwal, Harbans S.↗
NASA NTRS1993

Property changes induced by the space environment in composite materials on LDEF: Solar array materials passive LDEF experiment A0171 (SAMPLE)

Surface modifications to composite materials induced by long term exposure in low earth orbit (LEO) were dominated by atomic oxygen erosion and micrometeoroid and space debris impacts. As expected, calculated erosion rates were peculiar to material type and within the predicted order of magnitude. Generally, about one ply of the carbon fiber composites was eroded during the 70 month LDEF experiment. Matrix erosion was greater than fiber erosion and was more evident for a polysulfone matrix than for epoxy matrices. Micrometeoroid and space debris impacts resulted in small (less than 1mm) craters and splattered contaminants on all samples. Surfaces became more diffuse and darker with small increases in emissivity and absorption. Tensile strength decreased roughly with thickness loss, and epoxy matrices apparently became slightly embrittled, probably as a result of continued curing under UV and/or electron bombardment. However, changes in the ultimate yield stress of the carbon reinforced epoxy composites correlate neither with weave direction nor fiber type. Unexpected developments were the discovery of new synergistic effects of the space environment in the interaction of atomic oxygen and copious amounts of contamination and in the induced luminescence of many materials.

Source record↗
NASA NTRS1998

Preparation and Surface Analysis of a Fluorinated Amorphous Silicon for Photo-voltaic Device Application

Amorphous silicon films (a-Si:H) have been routinely deposited on a variety of substrates. Surface and interfacial studies were carried out with a PHI 5600 X-ray photo electron spectrometer. Co-deposition with fluorine yielded films having oxygen present as bulk oxide. The higher the fluorine content, the greater the amount of bulk oxygen observed. The presence of oxygen may be a contributing factor to inconsistent film properties of fluorine doped silicon materials, reported else where. A definite chemical interface between a layer containing fluorine and a layer made from pure silane has been delineated.

McWhinney, Hylton G.↗
NASA NTRS1999

3D Chip Scale Package (CSP)

Package/die stacking technology enhances most aspects of electronic systems such as size, weight, speed, yield, and power consumption.

Chip Scale Packaging (CSP) 3D CSP Stack TSOP D2CSP↗
NASA NTRS1998

Diamond Analyzed by Secondary Electron Emission Spectroscopy

Diamond is a promising semiconductor material for novel electronic applications because of its chemical stability and inertness, heat conduction properties, and so-called negative electron affinity (NEA). When a surface has NEA, electrons generated inside the bulk of the material are able to come out into the vacuum without any potential barrier (work function). Such a material would have an extremely high secondary electron emission coefficient o, very high photoelectron (quantum) yield, and would probably be an efficient field emitter. Chemical-vapor-deposited (CVD) polycrystalline diamond films have even more advantages than diamond single crystals. Their fabrication is relatively easy and inexpensive, and they can be grown with high levels of doping--consequently, they can have relatively high conductivity. Because of these properties, diamond can be used for cold cathodes and photocathodes in high-power electronics and in high-frequency and high-temperature semiconductor devices.

Krainsky, Isay L.↗
NASA NTRS1992

The coronal-sounding experiment

The main science objective of the Ulysses Solar Corona Experiment is to derive the plasma parameters of the solar atmosphere using established coronal-sounding techniques. Applying appropriate model assumptions, the 3D electron density distribution will be determined from dual-frequency ranging and Doppler measurements recorded at the NASA Deep Space Network during the solar conjunctions. Multi-station observations will be used to derive the plasma bulk velocity at solar distances where the solar wind is expected to undergo its greatest acceleration. As a secondary objective profiting from the favorable geometry during Jupiter encounter, radio-sounding measurements will yield a unique cross-scan of the electron density in the Io Plasma Torus.

Bird, M. K.↗
NASA NTRS1982

IUE observations of proto-planetary and variable planetary nebulae. I - V1016 Cygni, HM Sagittae, and HBV 475. II - A search for variability in IC 4997 and NGC 6905

The IUE satellite has undertaken UV observations of the proto-planetary nebulae V1016 Cyg, HM Sge, and HBV 475, yielding emission line fluxes, line ratios, line profiles, electron densities, and distances from these objects. While levels of increasing excitation and ionization as a function of time are shown by the data for the first two nebulae, the trend for HBV 475 is found to lead in the opposite direction. The formation of a shell is suggested by dramatic changes in the HM Sge UV line profiles over the last four years, including the disappearance of W-R features and the incipient splitting of the semi-forbidden C III 1909 A line. An additional IUE search for UV variability in the planetary nebulae IC 4997 and NGC 6905 has yielded emission line fluxes, line ratios and profiles, and central star temperatures, as well as stratification effects data for several ions in NGC 6905

Feibelman, W. A.↗
NASA NTRS2005

Surface charging and x-ray emission from insulator surfaces induced by collisions with highly charged ions : relevance to cometary and planetary sp

Characteristic X-ray emission lines are detected from simulants of comet surfaces as they undergo collisions with highly charged ions (HCIs). The HCI projectiles are O+2-O+7. Ion energies are varied in the range (2-7)q keV, where q is the ion charge state. The targets are the insulator minerals olivine, augite, and quartz. It is found that the emission of characteristic K-L, K-M X-rays appears to proceed during positive charging of the surface by the HCI beam. When one uses low-energy, flood-gun electrons to neutralize the surface charge, the X-ray emission is eliminated or greatly reduced, depending on the flood-gun current. Acceleration of background electrons onto the charged surface results in excitation of elemental transitions, including the K-L2 and K-L3 target X-ray emission lines of Mg and Si located spectroscopically at 1253.6 and 1739.4 eV, respectively. Also observed are emission lines from O, Na, Ca, Al, and Fe atoms in the target and charge-exchange lines via surface extraction of electrons by the O+q electric field. Good agreement is found in the ratio of the measured X-ray yields for Mg and Si relative to the ratio of their electron-impact K-shell ionization cross sections. The present study may serve as a guide to astronomers as to specific observing X-ray energies indicative of solar/stellar wind or magnetospheric ion interactions with a comet, planetary surface, or circumstellar dust.

comets↗
NASA NTRS1988

Energy dependent pitch angle distributions of auroral primary electrons

Double-layer/parallel-electric field accelerations and the subsequent electron-beam plasma interactions involving Cerenkov and anomalous cyclotron resonances are considered. It is found that these phenomena yield pitch angle distributions as noted from rocket and satellite studies. Although the electron acceleration by weak parallel electric fields forming a runaway electron tail is limited to a critical parallel energy determined by the anomalous cyclotron resonance, such a limitation does not occur with acceleration by a localized parallel electric field such as that in a double layer.

Singh, N.↗
NASA NTRS1978

Modeling the effects of an H2 gas release on the equatorial ionosphere

Three simulated point releases of H2 gas are carried out at 1930 LT over the magnetic equator: 5 kg at 300 km, 10 kg at 350 km, and 20 kg at 300 km. The subsequent effects on the ionosphere in the vicinity of these releases are studied by calculating the densities of O(+), OH(+), H2O(+), and H3O(+) from coupled time-dependent ion continuity equations. It is found that the 5-kg release produces a depleted electron density region, while a 10-kg release produces an electron density hole. Increasing the release to 20 kg yields substantial amounts of the product ions OH(+), H2O(+), and H3O(+). The dominant ions at the times of 52, 276, and 1252 sec after release are 55% for H3O(+), 47.6% for OH(+), and 72.7% for O(+), respectively. Moreover, 276 sec after release, percent depletions in the integrated electron density and Pederson conductivity are 5.8% and 2.9%, respectively, for the 5-kg release; 7.4% and 5.2%, respectively, for the 10-kg release; and 11.8% and 4.3%, respectively, for the 20-kg release. Whether or not such initial depletions are sufficient remains to be seen.

Anderson, D. N.↗
NASA NTRS1992

All-electron molecular Dirac-Hartree-Fock calculations - Properties of the XH4 and XH2 molecules and the reaction energy XH4 yields XH2 + H2, X = Si, Ge, Sn, Pb

Relativistic corrections to a number of properties of the Group IV hydrides are calculated using the Dirac-Hartree-Fock method. The use of first-order perturbation theory is sufficient to obtain relativistic corrections for Ge, but the effects of spin-orbit interaction and other higher-order effects begin to show for Sn and become important for Pb. The energy of the reaction XH4 yields XH2 + H2 (X = Si, Ge, Sn, and Pb) is also calculated. The results are compared with relativistic effective core potential calculations, first-order perturbation theory calculations, and limited experimental data.

Dyall, Kenneth G.↗